Combining 2 records in a single cube

Hi Everyone,
I would like to get your opinion about this particular requirement.
I have an opportunities cube (CRM) which stores info about different opportunities. One customer may go from one opportunity to another. Both the opportunities are saved as different records in BW for instance Oppt A (Record 1)and Oppt B (Record 2)
So now client wants to see in a single record, which customer went from Oppt A to Oppt B.
I am thinking about creating another cube and write a routine to check the Bill Account ( which is the only field available linking the 2 opportunities.
Is this possible? Has anyone encountered or made such a routine?
have you got other ways of doing this?
Your inputs will be greatly appreciated.
Thanks
Kumar.

Hi Vamsi,
Thanks for your offer to help with the coding. That wont be necessary anymore as I figured out I will not be able to join the 2 records since there is a One to Many relationship between Oppt A and Oppt B. I will just display them as different records and sort them together.
But since we have this idea of combining 2 records of a single cube, why don't we continue and close this.
If there was a 1 to 1 Rel, the records would have shown this way
Oppt A
Bill Account
Meter ID
Transaction no
Customer Name
Address
AutoDR Flag (Checked)
Load Approved
Oppt B
Bill Account
Meter ID
Transaction no
Customer Name
Address
TI Indicator Flag (Checked)
Campaign Enrolled
The Key fields would have been Bill Account and Meter ID
So the final Oppt would have been ...
Bill Account
Meter ID
Transaction no
Customer Name
Address
AutoDR Flag (Checked)
Load Approved
TI Indicator Flag (Checked)
Campaign Enrolled

Similar Messages

Combining multiple records into a single record (View)

Okay so here is my scenerio:
There is a table I have made that details SQL jobs and the various details about them. What i wan't to do is make a view with specific logic implemented. Fields that will be taken across to this view will be: LastRunDate, LastRunTime and Step_Status.
JobName will also be used to define the logic but will not be a column in itself.
What i wan't is an additional column using this logic, called 'DataSet'. For each Dataset there are multiple jobs that are unique to it, so there are multiple records being brought over from the table to view for one particular dataset. For example,
for 'ExampleDataSet' there are three jobs, i wan't it so these jobs are combined and named as 'ExampleDataSet' under a calculated column called 'Dataset'. For the following fields i would like it so that LastRunDate and LastRunTime are the time in whichever
job was last to be intitiated is the date and time set. For Step_Status, there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running'. If neither are running yet one has failed then 'Failed'.
Only when all three have succeeded should it then be set to 'Succeeded'.
I hope i have made that clear enough, please feel free to ask any questions if not. I am relatively new to SQL but i thought to at least try least try (I knew it wouldn't work) and it didn't work. But it may give you a better idea of
what i wan't:
CREATE VIEW [dbo].[vw_DataAvailabilityAnalysts] AS
SELECT CASE
WHEN JobName in ('Job1','Job2','Job3') and step_status='Running' THEN 'Running'
WHEN JobName in ('Job1','Job2','Job3') and step_status='Failed' THEN 'Failed'
WHEN JobName in ('Job1','Job2','Job3) and step_status='Succeeded' THEN 'Succeeded'
END as StatusCheck,
CASE WHEN JobName in ('Job1','Job2','Job3') THEN 'ExampleDataSet'
END as DATASET,
LastRunDate,
lastruntime,
step_status,
FROM [CDS_Common].[dbo].[DataAvailability]
Many Thanks,
Plain_Clueless
Plain_Clueless

Okay so here is what my table looks like (Simplified). There are four columns and the data within is extracted via a Stored Procedure.
JobName
LastRunDate
LastRunTime
Step_Status
Job1
11/06/2014
09:30:00
Succeeded
Job1
10/06/2014
09:37:20
Succeeded
Job2
11/06/2014
04:05:00
Succeeded
Job1
09/06/2014
02:17:41
Succeeded
As you can see there are 3 jobs which are all 'Job1'. This jobs are obviously different within the table however this represents that they are jobs which all update the same DataSet within our local warehouse. Whereas Job2 updates a different dataset alltogether.
I wan't to create a view which will alagmate the jobs that are of the same DataSet, which will disclude the column JobName but would create a whole new column that looks like this:
DataSet
LastRunDate
LastRunTime
Step_Status
DataSet2
11/06/2014
04:05:00
Succeeded
DataSet1
11/06/2014
09:30:00
Succeeded
Bascically what this shows you is all the Job 1's combined so they are one record, Amaglamated. The last time any of these jobs were run is the LastRunDate & LastRunTime, which was the first record in the first table provided. Again for Step_Status,
there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running' (Absolute). If none of the three jobs are running yet one has failed then 'Failed'. If one has failed yet another is also running then
'Running'.Only when all three have succeeded should it then be set to 'Succeeded'. (This last bit isn't as important).
Hope this clears it up a bit,
Plain_Clueless
Plain_Clueless

Hiding filenames when combining multiple files into a single .pdf

I'm fairly new to this Acrobat X. I'm trying to assemble my portfolio to distribute to employers but I cannot seem to get rid/hide the filenames in the final pdf file. I was using the option to 'combine multiple files into a single pdf' because I was compiling images and documents to a single readable pdf file. I got all that done but once I open it, I'd see that each page would still contain the original file names rather than page numbers - which I prefer not to have employers see for the sake of tidiness (and I refuse to use the Adobe portfolio because it's not really efficient on space or design. I prefer a simple page-by-page pdf). So I was wondering if anyone can tell me how to hide my file names, change them into page numbers or getting rid of them all together so the 'Table of Contents' in the pdf preview mode would not show anything, I would really much appreciate it.
-Ss

Well, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
If you want, I can send the file to you.

Concatenate multiple records into one single record

Hello everyone,
Can anyone guide me how to merge multiple records into one single record
like......... I am getting the data in the file like
aaaaa/bbbbbbb/ccccccccccc/dddddddddddd/eee
ffffff/gggg/hhhhhhhhhhhhhh
/123/4567/55555/99999999/kaoabfa/eee
fffff/kkkkkkkk/llllllllllllllllllllllll
when i use gui_upload I am getting the data into the internal table in the above format.
My main intension is to split the record at / to multiple lines and dowload it into another file.
What i am planning to do is... if the line does not start with / then i want to concatenate the multiple lines into single line and then split it into multiple records. Can anyone guide me how to achieve this.

Yes, it should work.
In my example
Loop at itab.
concatenate i_text itab into i_text.
endloop.
You change that loop for the loop of your internal table with the file records
So if you have this three records
'aaaa/bbb/ccc'
'/dddd/efg'
'hijk/lmn'
i_text will look like this at the end
'aaaa/bbb/ccc/dddd/efghijk/lmn'
then in this part of the code
split i_text at '/' into table itab2.
itab2 will have the records looking like this
aaaa
bbb
ccc
dddd
efghijk
lmn'

Combining multiple lists into a single list

Hi,
I have created 5 different lists within the same sharepoint site. These lists have some common fields among them for example each list has same fields such as "Country", "Unit", "Review Name" etc. I now want to create a single
list that will have show only the common fields present in each list. Could you please advise if this can be done and if so how?
Thanks, Aarti

To have a full fledged synchronization between 5 lists will be very complicated.
If the 6th list is a read-only / view only, I would recommend you to create Lists 1, 2,3,4 and 5 as a custom content type.
Then you can put a Content Query Web Part that filters out your custom content type and combines the content from the three lists.
or create a workflow to update the data when new item is added in other lists
Check the similar post
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2480cdbe-acb4-434f-9866-cf716cad0994/combining-multiple-lists-into-a-single-list?forum=sharepointadminlegacy
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/5a853466-7480-438a-b32d-3ad6d34347ef/combine-lists?forum=sharepointdevelopment

MessageTransformBean - SimplePlain2XML - Multiple records on a single line

Hi,
I am trying to convert multiple record from a single line to multipe rows in an XML message with the MessageTransformBean.
If the record look like this it's working:
RECORD1textETC
RECORD2textETC
But the incoming message are all on a single line:
RECORD1textETCRECORD2textETC
Is there a way to add a linefeed to my incoming message after X characters, or to tell the adapter to split by length instead of spliting on the end of line?
Thanks,
Martin

I had to code a custom Module Adapter to do it.
Here's the main part of the module adapter EOLConvertBean...
Message msg = (Message) inputModuleData.getPrincipalData();
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A; // end of line char
int current = 0; // current bytes read
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen; // record len = insert EOL after X recordLen
// TODO change for do while for 1x line record
for (int i = 0; i <= lines; i++) {
 baos.write(content, current, recordLen);
 baos.write(crlf);
 current += recordLen;
xmlpayload.setContent(baos.toByteArray());
inputModuleData.setPrincipalData(msg);
Edited by: Martin Lavoie Rousseau on Oct 6, 2010 9:08 PM

Merging two records in a single record for the same matnr,werks and bwart.

Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table.
I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable.
Then there should be only one record for the same matnr,werks,bwart.
Any suggestion would be appreciated.
Regards,
Amit

hi,
You can COLLECT statement only if all non key fields are numeric.
This statement Adds all such fields and give us a single record.
Regards
Sumit Agarwal

Put 2 relevant records in a single row

Hello everybody,I have a Attendance table, which has columns WorkDate. Schedule_IN_Time, Schedule_OUT_Time, Login_IN_Time, Login_IN_Time, Login_Type.Now for every Login_Type = "I" or "O" there are two records. That means for a day say 07/10/2006 as Workdate there are two records like,EmpID WorkDate Schedule_IN_Time Schedule_OUT_Time Login_IN_Time Login_OUT_Time Login_Type1 07/10/2006 09:00 17:00 9:00 I1 07/10/2006 09:00 17:00 17:15 ONOW.. I want a report in Crystal report which will have a single record for a single Workdate..as folllowsEmpID WorkDate Schedule_IN_Time Schedule_OUT_Time Login_IN_Time Login_OUT_Time1 07/10/2006 09:00 17:00 9:00 17:15 Can you please help me out..I'm usng CrystalReport XI.Thanks in advance.sauren 

Once you group on these put summaries for Max onÂ each of the values you want to display as one line.Â Â Put them in the footer and suppress the details.Â That should give the desired results.
Â Â Â Â - Kathryn Webster (Report Design Consultant)
Â Â Â Â Â Â Â Â Â Â Kat's News: http://diamond.businessobjects.com/blog/279

How to identify missing records in a single-column table?

How to identify missing records in a single-column table ?
Column consists of numbers in a ordered manner but the some numbers are deleted from the table in random manner and need to identify those rows.

Something like:
WITH t AS (
           SELECT 1 ID FROM DUAL UNION ALL
           SELECT 2 ID FROM DUAL UNION ALL
           SELECT 3 ID FROM DUAL UNION ALL
           SELECT 5 ID FROM DUAL UNION ALL
           SELECT 8 ID FROM DUAL UNION ALL
           SELECT 10 ID FROM DUAL UNION ALL
           SELECT 11 ID FROM DUAL
-- end of on-the-fly data sample
SELECT '[' || (id + 1) || ' - ' || (next_id - 1) || ']' gap
FROM (
         SELECT id,
                 lead(id,1,id + 1) over(order by id) next_id
           FROM t
where id != next_id - 1
GAP
[4 - 4]
[6 - 7]
[9 - 9]
SQL> SY.
P.S. I assume sequence lower and upper limits are always present, otherwise query needs a little adjustment.

Append or combine multiple IDOCs into a single IDOC file

Hi All,
We are implementing multiple new payment types that will generate IDOC files for us to send to the bank. To keep the cost to the minimum, the requirement is to combine multiple IDOCs to a single file.
I'd like to know the most efficient way to complete this task. Also, I am new to this forum, please let me know if I need to include additional information.
Your help will be deeply appreciated.
Thank you,
Joanne T.

Hi Milind,
One way you can do this is generate each report in PDF or Postscript, and then use Adobe Acrobat Distiller to combine the files into one PDF document.
Regards,
Stewart

Is there a way to combine multiple pages into a single document?

In the program "Pages," is there a way to combine multiple pages in a single document?

Jean Louis Gassee, who used to be a senior Apple executive, wrote on Apple's bad approach to the latest iWork suite:
https://discussions.apple.com/message/25209121#25209121
Peter

How to insert multiple records in a single query

Dear all,
Can you please tell
how to insert multiple records in a single query ??

INSERT INTO table_name (column_1, column_2) VALUES ('value_A', 'value_B')OR
INSERT INTO table_name
(column_1, column_2)
SELECT 'value_A', 'value_B' FROM DUAL
UNION ALL
SELECT 'value_C', 'value_D' FROM DUAL
;Edited by: Benton on Nov 9, 2010 1:59 PM

Multiple records as a single transaction in JDBC Receiver Adapter

Hi,
I am sending multiple records in a single message to a JDBC receiver adapter to get updated to the database. How to make all the insert a single transaction. Like all the records has to be inserted else all has to be rolled back.
For eg for table Employee two fields EMPNO and EMPNAME
EMPNO EMPNAME
1 Jay
2 Christie
These two records are in the same message and has to be updated
if one fails the other has to be rolled back.
How can i achieve it using a JDBC Receiver Adapter.
Thanks
Sebin

Hi Rolf Micus,
My xml structure to insert 2 tables are as follow:-
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PODB xmlns:ns0="http://abeam.com/xi/fer_filejdbc_scenarios1">
.. <STATEMENT_HEADER>
.... <ROW action="INSERT">
...... <TABLE>ZPO_HEADER</TABLE>
...... <access>
........ <PONUMBER>001</PONUMBER>
........ <PODATE>20070801</PODATE>
........ <POAMOUNT>200.99</POAMOUNT>
.... </access>
.... </ROW>
.. </STATEMENT_HEADER>
.. <STATEMENT_DETAIL>
.... <ROW action="INSERT">
...... <TABLE>ZPODETAIL</TABLE>
...... <access>
........ <PONUMBER>001</PONUMBER>
........ <PONO>1</PONO>
........ <POITEMCODE>A12345</POITEMCODE>
........ <POITEMDESC>Testing A</POITEMDESC>
........ <POITEMAMOUNT>2990.00</POITEMAMOUNT>
........ <POITEMQTY>55</POITEMQTY>
...... </access>
.... </ROW>
.. </STATEMENT_DETAIL>
</ns0:MT_PODB>
Fro the structure that you have declared..there is only contained 1 statement, try to admend your MT to have 2 statements.
If you wish to insert multiple records, just create a loop/multiple of access tag inside STATEMENT tag. For example, multiple records insert into Header should have multiple access tag in Header STATEMENT. Same goes for muliple records insert into Details STATEMENT should have multiple access tag in Details STATEMENT.
With this structure, whenever any records insert/update/delete failed...it will rollback all the transactions together, ie. Header and Details.
PS: For different table, please create different STATEMENT.
Hope it helps.
Message was edited by: Pua Ming Fei

Standard report which gives Record count of ODS, Cube and Source system.

Hi-
Is there any standard report which gives the record count of ODS, Cube and Source system?
or
If any one has ABAP program which takes care of record count pls let me know.
Thanks in advance

I don't understand. You need to check the data loads. What for do you want a list of ODS, Cubes and sources systems?
You can use messages from process chains to monitor the data loads.
You can also use an abap program inside teh process chains to save data into a table and then an abap report to see if everything went OK.
But, thinking again, you may be able to use BW statistics to get some of the information you need. Check the help for BW statistics, it might give you an idea of what you can do.
Regards,
Diego

How can we configure or control records go into single idoc thru BODS?

Hi,
Our case is -
IDOC format has three segment. Each segments has child nodes -
1. CONTROL SEGMENT - This is required only once per idoc.
child1
child2
2. SEGMENT1 - sinlge source record to be broken into two segments.
child1
child2
3. SEGMENT2 - sinlge source record to be broken into two segments.
child1
child2
we have a single source (lest say having 100 records).
In the current design which does generates IDOCS but as many as the no of records in source. Currently we use a row generation transform as dummy (with row count as 1) to pass to the IDOC parent nodes's from clause to escape the error - invalid input to the parent nodes.
Child nodes are either mapped to the source table or are null.
Question - How can we configure this in a way that we control how many records go into single idoc. Ex - lets say 50 per idoc so only 2 idoc should be created if 100 records are there.

HI,
this sounds to me like Data Services. If so I would suggest to post this into the Data Service forum.
regards
Ingo HIlgefort

Combining 2 records in a single cube

Similar Messages

Maybe you are looking for