Combining GarageBand files?

I recorded a number of of voice tracks in separate GB files. I now want to put sveral into one file and have them play consecutively. How do import a GB file into an existing GB file?

ggreene wrote:
How do import a GB file into an existing GB file?
there is no direct method.
what you can do is copy each region from the original project and paste them into the second project. when you're finished, do a Save As and Archive in the seconf project to dtore all the audio files in it.

Similar Messages

  • After I have combined some files together to make them into one pdf, can I add and take out files?

    After I have combined some files together to make them into one pdf, can I add and take out files?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

    Good day,
    I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
    When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

    Good day abrieb93050306,
    I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
    As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
    Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
    This will probably resolve your issue.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

  • How do I move GarageBand files from iPad 2 to New iPad?

    My laptop is a PC, not a Mac.
    At the Apple store I was told it was no problem. I merely back up my iPad 2 and then restore my New iPad (3) from that backup. So far it isn't working and I've tried several times.
    Weirdly, when I first set up my New iPad (3) iTunes set it up as the default "Steve's iPad" which is what I called my iPad 2 on iTunes, and  my GarageBand files appeared on my new IPad (3). So I know it's possible.
    HOWEVER, I hadn't backed up or synched my iPad 2 in a while, so my newer GarageBand files weren't on it.  So I backed up/synched my iPad 2 and then restored my New iPad to original settings, and clicked on "restore from Steve's iPad"  No luck. No GarageBand files. I tried this several times,with no luck.
    Any help will be greatly appreciated.

    Here is how you can export a .band folder to your iPhone, it should work for iPad as well.
    This was my steps
    1. Download iExplorer and install it. Connect your iPhone
    2. Find the folder "com.apple.mobilegarageband" in iExplorers browser
    3. Drag and drop your folder .band to the folder "Documents". (!! Your'e not done yet!)
    4. In GarageBand on your iPhone press the plus-button as you would start a new song. Choose "Copy from iTunes". Choose your imported song.
    5. Start rockin'

  • Hiding filenames when combining multiple files into a single .pdf

    I'm fairly new to this Acrobat X. I'm trying to assemble my portfolio to distribute to employers but I cannot seem to get rid/hide the filenames in the final pdf file. I was using the option to 'combine multiple files into a single pdf' because I was compiling images and documents to a single readable pdf file. I got all that done but once I open it, I'd see that each page would still contain the original file names rather than page numbers - which I prefer not to have employers see for the sake of tidiness (and I refuse to use the Adobe portfolio because it's not really efficient on space or design. I prefer a simple page-by-page pdf). So I was wondering if anyone can tell me how to hide my file names, change them into page numbers or getting rid of them all together so the 'Table of Contents' in the pdf preview mode would not show anything, I would really much appreciate it.
    -Ss

    Well, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
    If you want, I can send the file to you.

  • Can't empty GarageBand files from trash

    I am creating GarageBand files; when I move them to trash and then try to empty the trash, I get a message saying I need to make sure they are "unlocked" and permissons are all okay, and then it gives me two options:  Stop or Continue, neither of which successfully deletes the file from the trash.
    I have gone to the file's "Get Info" and confirmed the the "Locked" box is NOT checked, and that my permissions are "Read and Write" and I've even tried to unlock the little lock at the bottom of the Get Info screen.  To no avail, I still cannot empty the file from the trash.
    I have checked user communities and tried to hold down the Option Key while I empty the trash.  One time out of 4 or 5, this works.  I have also tried to hold down the Option AND shift keys at the same time while I empty the trash.  No difference.
    The only thing that seems to work is one user's suggestion to open the "Terminal" utility and type in some command that supposedly resets permissions and empties the trash and fixes everything.  This has worked both times I've done it, but then the next time I put a new file into the trash, it's once again back to being stuck and "locked." 
    I'm not sure whether to post this in GarageBand community or Lion/general pages, so I may do both...but can anyone help me here?
    Thanks.

    Now that I posted - More Like This offered the solution - hold Option key while emptying - works on locked files also. Thank You Very Much !!!

  • How do I get GarageBand files from an older mac onto my iPad 2?

    How do I get GarageBand files from an older mac onto my iPad 2? I can open the GarageBand Documents folder through iTunes while the iPad is sync'd but I can't seem to "add..." any of my old .band folders to the iPad to be able to view those music projects. When I tried I could only sync individual data files contained in the .band folders over to the iPad and there was no way to organize them into .band project folders. What can I do here to get these GarageBand projects onto my iPad for further use?

    This is not currently possible. You can transfer an iPad project to the Mac, and transfer songs/loops from the Mac to iPad, but not GB files from Mac to iPad.
    Send feedback
    http://www.apple.com/feedback/

  • Acrobat XI Pro: Text boxes empty after combining PDF files

    I have a user when she combines a few documents only one document is missing some text in text boxes that were showing up before.  Here is a screen shot of the two files:
    The document on the left is what occurs after the files have been combined, the document on the right is the original document.  I spoke with tech support, they told me to take the original pdf document then print it to the adobe pdf printer and select the option to print it as an image.  Then when we combined the files it was working fine.  I also took the original Excel 2010 document that the right document in the image came from, printed that to the Adobe PDF printer and made sure it printed it as an image.  Then after combining them it worked once more.  My problem is the user didn't have to print the excel doc to an image, she would just have to click on the Acrobat tab in Excel and tell it to create a pdf doc.  So is there a setting I'm missing?

    I tried uninstalled Acrobat XI and installed Acrobat X but the problem still exists.  I spoke with my user some more and found that if she leaves out one of the documents from the combining process this issue does not occur. So either this is a font incompatibility or that document that was left out is corrupt.  Any thoughts?

  • Merge and Combine PDF files in a numerical order

    Greetings!
    I'm using Adobe Acrobat to create a photo LookBook or an eBook. I'm importing and merging straight from .JPEG's and Acrobat work's great. The JPEG's are sorted by capture date, renamed and numbered as such: "10_File.Name.jpg". However, once I attempt to merge over 100 files I noticed that the numerical order of the file names is wrong. You'll notice in the example below that when viewed by name, the three digit numbers begin after 10. Well, in this example it's twelve. This affects to page order of the combined .PDF file. How can I maintain consistent name order to avoid assembling the finished ebook by implementing two workflow steps. Meaning the first step to combine the double digit numbers, then the second step to combine the three digit numbers. What can I do to resolve this issue?
    Greatly appreciated!

    Try it with a leading zero ( 003_, 007_, 008_, 010_, 011_, and 012_ ).
    Be well...

  • Can't combine Excel files in Adobe Pro

    I can currently convert an .xlsx file within Excel to a .pdf with no issues. However, I need to be able to combine multiple files in Adobe, a large portion of which are excel files. I was able to do this without any issues until a few days ago. Now I can no longer see Excel files listed as supported when trying to combine.
    I've tried repairing the install, but that didn't help.

    In which dialog are you not seeing the Excel file type? If you type *.* can you see it? What version of Acrobat and OS are you running?
    Have you attempted to repair your Office appication to correct the file association?

  • Why can't I open garageband files in Logic

    Loaded Logic pro 9 last evening and whew that took a while.
    I started trying to open Garageband files in logic and
    it made the attempt but didn't get very far. The progress
    window open but there is no progress. Just the beach ball
    and finally force quit of Logic.
    Logic works on it own, and Garageband works on it's own
    just fine.
    Another question, Do I need to install the Jam Packs I used with
    Garageband into Logic. I also have a few third party loops,
    should I install those as well or will Logic see all those loops
    when I finally get logic to open my Garageband files?
    Of course many thanks in advance.

    I have Garageband 5.1 and yes Ilife 09 as well.
    As an Update, I checked off all the items that were
    unchecked in my second installation using the install
    disc. Then I restarted the computer.
    This allowed some success with opening some of the
    garageband projects in logic. However 3 of the projects
    still refuse to open in logic.
    These 3 files seem to have one thing in common. When I try
    to open them in logic they get as far as the progress
    bar but then they all stop at a point where the words
    " channel eq" or "noise gate" is displayed and then I
    get the beach ball followed by force quit.
    I suspect the problem may be associated with plugins.

  • Combine supported files... problem (Word 2007, Acrobat 9, Windows 7)

    Windows 7; Word 2007; Acrobat Pro 9
    Print > Adobe PDF within Word produces pdf file that faithfully reproduces the Word file (that is, this process works as expected).
    RClick context menu 'Combine supported files in Acrobat' produces output characterized by incorrect letter spacing and incorrect typeface (font) output among other issues.
    Various possible resolutions have been tried with no success (PDFMaker option changes, output resolution (dpi) changes and so forth).
    The same results are obtained when using the combine feature from within Acrobat Pro.
    Thanks for any and all help.

    Footnotes in tables were the problem with my doc as well.  I tried the option of saving the doc as a Word 2003 file, but it didn't help.  I chatted with Adobe Customer Service and was provided this fix:
    In Word 2007, click on the Acrobat ribbon
    In the "Create Adobe PDF" panel, click on "Preferences"
    In the "Settings" tab, under "Application Settings," UNCHECK the box next to "Enable Accessibility and Reflow with tagged Adobe PDF"
    After that, I was able to create the PDF, and the table of contents and external hyperlinks all worked.  The footnotes were no longer hyperlinked, but since they're on the same page as the items they're referencing, that's not really a problem.  Cheers,
    JG

  • I purchased the Adobe PDF Pack but it won't allow me to convert any files to pdf or combine multiple files to into 1 pdf form. It keeps saying "Error occurred while trying to access the file". WHY

    I purchased the Adobe PDF Pack for $7.50/month (or $89.99/yr) but it won't allow me to convert any files to pdf or combine multiple files into 1 pdf form. It keeps saying "An error occurred while trying to access the service". WHY is this happening & How can I fix it?

    Hi hpmg,
    It seems you are trying to access the service via Adobe Reader. Make sure you are signed in with your Adobe ID. Is Reader updated to the latest patch v 11.0.09?
    It might be possible that a firewall or antivirus might be breaking the connectivity from Reader to the server.
    Try accessing the service from the browser: https://cloud.acrobat.com/exportpdf  and check if that works for you.
    Regards,
    Rave

  • "Combine supported files in Acrobat" right-click funtion is slow or locks up system since upgrade to Office 2013

    I have several admins who have for years combined quantities of large Word documents into a single PDF by highlighting them, right-clicking, and selecting "Combine supported files in Acrobat."  Until recently, they were all using Office 2010 Pro Plus and a variety of versions of Acrobat - Standard 9, Professional 9, Standard 10.  They said it was quick and painless.  We've recently deployed Office 2013 Pro Plus, and they are complaining that doing the same thing they've always done is either completing but yeilding only the first document in the resulting PDF or rendering their systems unresponsive.  I have reproduced their issues and have found some evidence online of Possible incompatibilities between Office programs and the Adobe Acrobat PDFMaker Office COM Addin add-in, however Adobe's list of Compatible web browsers and PDFMaker applications indicates that Office 2013 supports PDFMaker versions as old as Acrobat 6, and we are not that outdated.  Any suggestions?  This is crippling their productivity.
    Thanks!
    Carrie

    Only the updated Acrobat XI supports Office 2013. The updates are necessary to address the changes to OFFICE introduced after Acrobat XI was released (OFFICE 2013 is more recent than the original AA XI release). No other versions of Acrobat can be used with OFFICE 2013 other than printing to the Adobe PDF printer.

  • Combine supported files is not automatically opening and closing source applications?

    On my Vista 64 machine, suddenly, the "Combine supported files in Acrobat" has begun malfunctioning. Instead of automatically opening and closing the source application (such as MS Word), Acrobat opens the application and then asks to save a new PDF file for each source file and stalls out the conversion. This problem is not happening on my Win XP machine. I have used the 'Repair Acrobat Installation' function but the problem is not corrected.
    Thanks for any suggestions.

    Just to close out this thread, the bug was fixed with the latest version of Acrobat Pro Extended (9.3.3).

Maybe you are looking for