Combo of 2 problems due to new server at ISP which they deny.

My co-op ISP is playing havoc with a new server, and we've even been without phone service several days for many hours at a time. They deny anything to do with the current death of my Firefox browser even though there were no problems until they started trying to make improvements.
At this point I can finally get Internet Explorer to work but don't like it and do suspect that the new server may be skewed towards that browser. I also had many bookmarks on Firefox that had not yet been imported onto IE and I DON'T WANT TO LOSE MY FF BOOKMARKS which I fear will happen if I simply try to install a new version of FF.
So my actual question becomes: Is there any way to install a new FF browser without losing my old FF bookmarks which had not been transferred to IE before the series of unfortunate events?
If I can preserve the FF bookmarks, I won't mind installing a new FF browser or, of course, restoring the old one which now refuses to load.

What is the actual problem that you are having. Re-installing Firefox will often not fix problems.
If you re-install Firefox it will use the same profile data such as bookmarks.
If you want to backup and restore your bookmarks see the [[backing up and restoring bookmarks]] article.
You mention bookmarks refuse to load, you may have a problem with the file that stores bookmarks, this site may be of use - http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Similar Messages

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

Sudden airport problem - due to new networks in the building?

I've been using my airport extreme network for some time, without any problems. My macbook suddenly stopped recognising the network - although my iphone and other computers continue to use it without any problems.
The network name no longer appears in the drop down Airport Extreme menu, although several other networks in the building do.
Strangely, this seems to have occurred just as several other people have moved into the building and set up their own, new, non-airport extreme wifi networks.
Is there anything I can do to force my macbook to re-recognise my own wifi network? I've tried clicking "other..." on the drop down menu and then typing in my network's details, without any success.
Switching everything on-and-off hasn't helped either.
Thanks!

Check out MacStumbler. MacStumbler (freeware) is a utility to display information about nearby 802.11b and 802.11g wireless access points. It is mainly designed to be a tool to help find access points while traveling, or to diagnose wireless network problems. Download at http://macstumbler.en.softonic.com/mac
 Cheers, Tom

JavaConsole Error: Problem reading data from server

HI All
We are getting this error on java console on a page:
Error: Problem reading data from Server - Java.Security.AccessControlException:access denied (java.util.PropertyPermission http.strictpostredirect Read)
In this page we are not firing a SQL Query of huge data.
Any suggestions on this why it is happening?
Thanks
Manisha

Manisha,
I think JVM(Java Virtual Machine) is trying to access something at network level and it cant able to find it.Or any new patches of java is installed.
Or may be due to IIS or Applet,Don't know exactly.
You can find some answers in below links:
http://java.sun.com/j2se/1.4.2/docs/api/java/security/AccessControlException.html
http://www.webdeveloper.com/forum/archive/index.php/t-46358.html
-Suresh

Moving Hyperion Intelligence to New Server

Using a document supplied by Hyperion, we are tyring to move ourHyperion Intelligence setup from an old server to a brand newshinny system. However, we're a little confused on the databaseend. We currently have the old server A pointing torepository/database A. The new server B has been installedwith the Intelligence suite using database B. We areusing oracle for our database/tablespace. The document stateswe simply need to "exp" from database A and"imp" into database B. (note: there are other stepsinvolved here but are unrelated to the database.) We're having some problems/questions related to this and wondered if anyone else out there hasattempted to migrate their Intelligence suite from one server toanother. I do have an open ticket with Hyperion but wanted to hear from any other customers that might have done the some thing. Thanks. Luke

Luke, Out of curiosity.....where did you find this document. I contacted support Friday because we are planning on moving Intelligence to a new server as well but they basically told me to login to e-support and look for the document there. I have been unable to locate this online. Can you perhaps enlighten me as to where I may be able to find this? I saw you post and figured I'd ask before calling support back later this morning. Thanks, Bob

USENET - BTINTERNET News server

Are there any problems with the News server?
Not able to connect to it today.
MB
Solved!
Go to Solution.

JMB wrote:
Are there any problems with the News server?
Not able to connect to it today.
Hi.
If you are unable to login, then it's almost certainly an IP address problem - as a few ranges still do not work. The backroom people have not configured the firewalls correctly to allow all BTinternet IP addresses to connect.
A router reset/power cycle should do the trick - i.e. to get a new IP address, and try again.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Migrate WWI and Expert Rules to new server

Hello,
Does anyone have any "best practice" document or information related to migrating WWI and Expert rules from an existing server to a new server? The "cookbook" provided in SAP Note for WWI installation does not mention anything regarding "re-install" or "migration.
Thanks in advance.

Hello Thomas,
I do not have a document available for you, but I would do it like this:
Make sure you have the same Word Version installed on both PCs
Make sure the word settings are the same (Trusted Locations / Macro Security etc.)
Make sure you have the same printers/printer drivers and default printer definied on both PCs
Copy WWI and Expert Folder from one PC to the other to the same location
Make sure you have the same PATH Variables defined on both PCs
Makre sure DCOM settings are the same of MS Word and Adobe
If you send PDFs make sure Adobe Reader and the tool you use to create PDFs is installed on both PCs the exact same way
SetUp the Windows Services for EH&S Management Server, WWI and Expert on the new server exactly the way they have been on the old server.
If your new PC has a different OS or newer Office Version I would do a complete new installation via the EH&S Management Server / CGSADM. Make sure to copy your Rules files and Graphics from the old PC to the new PC.
Hope this helps
Mark

HT201412 I have a problem connecting to the server (SSL problem) on my new Apple ipad. I was supplied with a new ID password, but I am unable to get into my settings and email. Could someone please offer a suggestion? Thanks! A.A.

I have a problem connecting to the server (SSL problem) on my new Apple Ipad (iOS6). When submitting my Apple ID password, I am prevented from signing in to a secure connection due to an SSL problem. Any suggestions ?? Thank you!

Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer.

"There was a problem connecting to the server" in iTunes after migrating to new mac

I have a problem that is driving me crazy with my brand new iMac. I see many other people posting similar issues, but none of the other solutions seem to work for me.
I had a MacPro and bought a new iMac, on which I used Migration Assistant to set up. So the new iMac is virtually the same as my old machine in terms of appearance and installed applications. Both machines have Mountain Lion 10.8.2. All software on both machines has been through Software Update and is fully up to date, as are the connected devices (iPhone and iPad).
The problem is with iTunes. Every time I start iTunes (I think at the moment it checks my two connected devices) I get a pop up dialogue saying:
There was a problem connecting to the server "MacPro".
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
This dialogue continues to pop up constantly as long as iTunes is open, interrupting my work and frustrating me no end. The old machine is of course turned off and indeed is not available -- but I can't find what on the new iMac is so desperate to connect to it.
So far I have tried completing erasing my iTunes library, deleting all the preferences, reinstalling iTunes from a fresh download of the dmg, safe rebooting several times with no peripherals connected at all, and deleteing other preferences like the Login Items, iPhone config and iPhoto. I have also cleared Recent Items from the apple menu and opened "Connect to Server" in the finder and cleared all servers from the dropdown menu.
Last night I also completely restored my iPhone from scratch to see if that would clear away the issue and I have connected both iPhone and iPad to go through any apps that have permission to write content to my computer and deleted all of them completely from the devices.
Nothing has changed at all after all that, and I have run out of ideas. Clearly there is something somewhere that has my old machine's name hard coded in it but I can't see any way to search for it. I would grep my Library folder but I think a lot of the files are binary so I'm not sure that would unearth anything. I've seen many posts saying that Apple phone support (which I would qualify for) can't help with this issue and so I have put off phoning them to simply run through all the things I've already tried.
Any advice that anyone could offer would be extremely helpful. I can't use iTunes at all like this as it disrupts everything I try to do on the new machine.
many thanks!!

Nothing at all? Can't anyone help with this issue at all? I would be grateful for any suggstions as it is driving me crazy. It happens every time I open iTunes and also every time I open Mail.

Problem creating a new Glassfish 4 server with Oracle Tools for Kepler

Hello,
I installed Oracle Tools for Kepler with no problem. But when I want to create a new server and fill in the directory to the server (which is valid, C:/glassfish4/glassfish), nothing happens. I can only click 'back' or 'cancel'.
There is no error message.
Is this a bug in Eclipse or Oracle Tools, or do I do something wrong ?
Thanks in advance for help.

Hi,
Could you let us know where you installed the GlassFish tools plugins from ?
Glassfish 4 support in OEPE has been available since Glassfish was released in June. But it looks like a bug may have been introduced in the latest build available on http://download.java.net/glassfish/ which does not exist in the version available at http://download.oracle.com/otn_software/oepe/12.1.2.1/kepler/repository
The workaround on the version you are running is to enter a dummy password value and this should allow you to create the Glassfish 4 server.
I will be filing a bug to track this issue
thanks
Raj

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

New 4s "could not activiate" "There was a problem connecting to the server" What should I do.

Just received the new iPhone 4S. Going through setup but cannot get activated. One paragraph of error message says"Activatio still pending". The next one says There was a problem conecting to the server. Please try again later."
So what should I do? Wait and it will automatically activate (=pending?) or try again to set up.

You wait. THere isn't really anything you can do to speed up the process. Once it activates, they will notify you. It could take 2 hours ---- it could take 24 hours....we go through this every year when the new model comes out and the Apple and ATT servers can't handle the number of activations....
Pack patience and wait.

"New Server Behavior ... " problems

I am trying to apply the "New Server Behavior ..." feature of
Dreamweaver 8 found under the Add Server Behavior tab. If I use a
variable and apply a Display As option set to Recordset Menu or
anything like that, I get an error message, "Error with 'Recordset
Menu' control: unable to locate required 'RecordsetMenu' control".
Trying to set the Display As option to Connection Table Menu gives
a similar, "Error with 'Connection table menu' control: unable to
locate required 'Connection menu' control".
Here is how you reproduce the problem.
Create a site using the MySQL-PHP server model.
Create a dynamic-PHP page using New from menu or Ctrl-N and
save it. Create a MySQL database connection.
Create a recordset from the Bindings tab. Use all the fields
from some table.
Under the Server Behaviors tab, Click the + sign to add "New
Server Behavior ..." Choose Document Type "PHP MySQL", give the
Server Behavior a name and click OK.
Click the + button to add a Code Block and click OK to insert
it into the window.
In the "Code Block:" windows replace the code block with
"<?php echo ?>" Add a space after echo and select "Insert
Parameter in Code Block". This should leave you with "<?php echo
@@Param1@@?>". Disregard the Insert Code options.
Click "Next...". The "Generate Behavior Dialog Box" comes up,
select the TextField in the dialog box window. An arrow suggesting
a menu should appear. Select "Recordset Field Menu" or any of the
Recordset options. Choosing a "Dynamic Text Field" may not generate
an error. Connection Table Menu or any of the Connection options
also generates an error. Try those too. Click OK to close the
Dialog Box. Save your php page.
The name you gave your Server Behavior after "Choose Document
Type ..." will now appear in the Server Behavior menu when you
click + in the Server Behaviors tab. With your php page having
focus, select your Server Behavior from the + menu and you should
get an error,
"Error with '<My Server Behavior Type>' control: unable
to locate required '<control type>' control"
Click OK, and you should see a menu come up for your behavior
with a blank menu.

horsethiefbasin wrote:
> I know how to open a link in a new browser window by
going to the Behaviors
> panel. The site I'm working on is using PHP, so instead
of a Behaviors panel
> all it shows is a "Server Behaviors" panel. Under the
"Server Behaviors" there
> is't an option to open a link in a new browser window.
Should I be looking
> someplace different or is there another way to add this
function to a link?
>
> Thanks in advance for any help!
>
Makes no difference whether youre working on a php site or an
ordinary
htm site you still open a new browser window in exactly the
same way.
windows>behaviours>open browser window

New server settings not working - temporary Verizon problem

I was having a lot of problems connecting with email, and did an online chat. I was told that they are having problems with the new pop and smtp server settings. He told me to change them back to the old incoming and outgoing, but keep the new ports. This fixed my problems. He said the new server settings should be working again within 24 hours.

BillSamuel wrote:
Now incoming and outgoing are not working, and pop and smtp are. I don't know how many times we will have to go back and forth among these settings. But if you can't connect the one way, you probably can the other way. This transition is not going well. Ideally, there should be a period of transition in which either will work, but instead it's going back and forth.
Maybe the problem is only on certain Verizon email servers. I am in VHO 1 (North Texas) and have been using these new pop/smtp settings for many weeks, not a single failure. And before that the incoming/outgoing settings for probably a year or more, again, no problems. This is on both Windows Live Mail and Thunderbird.
If people would put their location (preferably VHO, but state and/or town would be better than nothing) in their profile here, or include the info in their posts, it might help identify when problems are regional or location dependent. As it is now, when people just post that something doesn't work, and someone else says it does, there is no way for anyone to help or see a pattern. Just a thought.....
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 (VHO 1)

Combo of 2 problems due to new server at ISP which they deny.

Similar Messages

Maybe you are looking for