New server settings not working - temporary Verizon problem

I was having a lot of problems connecting with email, and did an online chat. I was told that they are having problems with the new pop and smtp server settings. He told me to change them back to the old incoming and outgoing, but keep the new ports. This fixed my problems. He said the new server settings should be working again within 24 hours.

BillSamuel wrote:
Now incoming and outgoing are not working, and pop and smtp are. I don't know how many times we will have to go back and forth among these settings. But if you can't connect the one way, you probably can the other way. This transition is not going well. Ideally, there should be a period of transition in which either will work, but instead it's going back and forth.
Maybe the problem is only on certain Verizon email servers. I am in VHO 1 (North Texas) and have been using these new pop/smtp settings for many weeks, not a single failure. And before that the incoming/outgoing settings for probably a year or more, again, no problems. This is on both Windows Live Mail and Thunderbird.
If people would put their location (preferably VHO, but state and/or town would be better than nothing) in their profile here, or include the info in their posts, it might help identify when problems are regional or location dependent. As it is now, when people just post that something doesn't work, and someone else says it does, there is no way for anyone to help or see a pattern. Just a thought.....
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 (VHO 1)

Similar Messages

  • Content Server Settings not working (for PPM)

    Hi,
    We are on PPM5.0.
    We have set up the Content Server settings according to the PPM
    configuration guide.
    We, however, still see the documents (uploaded in the project) showing
    up on the PPM Server.
    We checked the entries in table CFF_CONT (in the PPM server), and see
    the contents updating when a document is uploaded. This makes us
    conclude that the documents are still not being stored on the Content
    Server.
    Any switch/flag that needs to be set/reset in the WAS and/or Content Server that'll help??
    Or anything else...???
    Thanks.

    Earl Powers BSR2751547 Thank you all. your suggestions really helped.

  • DNS Server settings not working as expected ....?

    Greetings
    I have our load balancer/firewall setup to where if someone enters a hostname like (www.example.com) it points it to a local server at 10.0.1.2
    When logged into the network, the DNS Server that pulls up is 10.0.1.1 (IP of firewall), which is fine, but I also have the two openDNS servers at the 2nd and 3rd slots manually entered.
    If the opendns servers are listed, the ping returns the public IP of www.example.com, but if removed, it does the right thing and pings the internal IP address.
    Even though the 10.0.1.1 DNS server setting is first, it doesn't seem to use that setting when you have DNS servers entered manually.... any idea why and how to make this stop?
    I prefer to leave the opendns settings in the DNS server settings (for when I'm switching around to various networks) ...

    Quick update. Added to a previously filed bug. Looks like it's assigned now so maybe we'll see a fix for this soon.
    https://bugzilla.mozilla.org/show_bug.cgi?id=563169

  • I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

    Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
    Från: Mylenium 
    Skickat: den 29 december 2014 16:48
    Till: Tony Bohman
    Ämne:  I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
    created by Mylenium <https://forums.adobe.com/people/Mylenium>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

  • I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

    I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

    Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
    But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
    While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

  • Apple Mail Still Will Not Work with Verizon

    Greetings to All:
    Sunday, March 24, 2013
    I've been trying to get Apple Mail to work with Verizon email for some years without success. I read the boards and find that this is not an uncommon problem. I received the new server settings for Verizon email today and eagerly plugged them in thinking this would solve my problems with receiving Verizon email, but, alas, it did not. Microsoft Outlook does a dandy job of pulling in Verizon email, but Apple Mail cannot. It's ridiculous that I should have to jump over to another email app to open one email account. All of the settings have been checked and double checked and the machine rebooted as the instructions mandate. 
    I don't understand what the problem is with Apple Mail and Verizon email. Apple Mail pulls in just about every other email service without flaw. Does anybody out there have any insight into this?
    -Dr. John

    I am beyond frustrated with this issue.  I've just spent 90 minutes on the phone with verizon support and it couldn't be fixed.  I was told to call Apple.  HAH!  "Please call during normal business hours."  Would anyone know what they are???!
    I did NOT have trouble until I changed the servers, per Verizon's request. I am so happy I didn't futz aroudn with my iPad.

  • New tab (+) is not working after upgrading forefox to v 23.0.1

    I had firfox version 22 i guess...Now today morning, I upgraded it to v 23. It displayed a message that one of the plug-in is not compatible with it and so wud be disabled. now later on I again downloaded the plug in to check whether its working or not but neither it worked (as I had already guessed) nor its showing in the add-ons or plug-ins.
    Now I am not getting why the new tab is not working. Not at all. Its so very annoying. I have googled the question and tried resetting firefox and new tab setting in about:config. But nothing helped.
    I think its because of that plug-in as I read somewhere that settings may be getting overridden by one of the faulty add-ons.
    Please help.

    Thanks
    But the problem is still there when I run firefox in safe mode...

  • DHCP Server does not work after Exporting and Importing Using Netsh Command

    Hello Friends :
    I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
    srv-1 : windows server 2003 + DHCP = working with no problem
    srv-2 : windows server 2003 + DC + DHCP = Worked without problem
    srv-3 : windows server 2008 R2 + DC = worked without any problems
    I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
    netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
    disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
    1- I have authorized it
    2- I used Rogue Checker tool in client computers they see authorized server without any problems
    3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
    4- Bindings are OK and DHCP servers only have one NIC installed on them
    What can i do to make sure my srv-3 DHCP server will work on the network ?
    thanks ...
    MIMO

    Are the clients on another network so you need to configure a DHCP relay agent?
    If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
    Have you check event viewer for any warnings or errors?
    And the classic one restarted the dhcp server service (or reboot)?
    Regards Per-Torben Sørensen http://pertorben.wordpress.com/

  • Add new document link not working in upgraded sharepoint 2013?

    Hello there,
    Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
    is working fine with environment  Office web apps not configured with Sharepoint.
    Looking resoluion /suggestion, thanks in advance.
    Regards,
    Sushil

    Hi  Sushil,
    According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
    from 2010 to 2013.
    For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
    Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
    files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
    1.In SharePoint 2013 Central Administration, click Manage web applications.
    2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
    The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
    it using claims-based authentication, or you can change the authentication method of the web application.
    Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
    To do this, run the following command on the SharePoint Server:
    Get-SPWopiZone
    The result will be one of the following:.
    internal-https
    internal-http
    external-https
    external-http
    Next, run the following command on the SharePoint Server.
    Get-SPWOPIBinding
    In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
    the WOPI zone to match the result from Get-SPWOPIBinding.
    If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
    For more information, please refer to the article:
    http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Mail, iCal Server and iChat server will not work over VPN

    I have an Airport Extreme Base Station at the office running the network. Behind it sits a Mac Mini Snow Leopard server running 10.6.3. The ports necessary for Mail, iCal Server and iChat work fine through that external connection. I can also connect with VPN from my 10.6.3 clients.
    HOWEVER, when I connect with the VPN clients, I am suddenly unable to access the Mail, iCal Server, Wiki server and iChat server. All connections time out. I can ping the server and I can do other things that do NOT work on the public Airport like ssh or VNC. ssh and VNC are closed at the airport extreme.
    So it's pretty odd. When I'm connected via the VPN, all ports that are forwarded to the Snow Leopard server time out over the VPN.
    I've tried various and sundry configurations with the VPN client. This includes trying to send all traffic over the VPN, moving it up in the service order, etc. etc. Nothing fixes it. DNS resolution is working fine, however when I do a wireshark capture of ppp0 traffic, I notice that SSL and TLSv1 handshakes appear to occur on the public IP address instead of the private network IP address... and they're all resets.
    Has anyone gotten this to work successfully? Like I said, all ports that are NOT forwarded through the Airport work fine over the VPN, but will not work when connected to the VPN. It's really bizarre.

    New data: any ports that are normally forwarded on the Airport Extreme to the Mac Mini server will not work when connected to the VPN.
    For instance, if I have imaps/993 forwarded from the Airport Extreme to the Mac Mini, it works fine over the Internet. If I connect to the VPN, I can connect to all OTHER services on the Mac Mini, but Mail, for instance, will not work.

  • Adding contacts to my new 8900 is not working.

    adding contacts from oultlook and /or outlook express to my new 8900 is not working. i tried everything from removing and re-installing the desktop manager to removing the battery of the device. nothing seems to be working.

    Ah, very helpful when we have the complete information.
    Desktop Manager 4.7 is not compatible with Outlook 2000, so that won't work. You will need to use DM version 4.2, Service Pack 2; or upgrade your Outlook to 2003 or better.
    For Express, it should work with Outlook Express 6. Check your advanced sync settings configuration and make sure you have it set to two-way sync and to notify you. 
    Desktop Manager 4.7:
    The following organizers are supported for use with Intellisync:
    IBM Lotus Notes 6, 6.5, 7, 8
    Microsoft Outlook 2002, 2003, 2007
    Microsoft Outlook Express 6, Microsoft Windows Contacts (Vista Address Book)
    Novell GroupWise 6.5, 7
    Yahoo!®
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS4036 icloud backup to new device is not working as says I dont have enough storage, even although the backup is only 3GB out of my 5GB (giving more than 1GB available!)???

    back up from icloud to new device is not working as it is saying that I dont have enough storage, when I am only trying to use 3GB out of my 5GB allowance???

    I may misunderstand your post - you "backup TO icloud" or restore from icloud to a new device.  Not sure which of these you mean.
    If backing up TO icloud, the problem may be that there's not enough storage on your device, not icloud, as a device needs a good bit of storage to create the backup.
    If restoring from icloud to a new device and you get the error, the storage referenced must be that on the device, although that doesn't seem possible, since a device has more memory than 5GB.

  • I updated iTunes to 10.5 and now in my Netgear Stora iTunes server is not working anymore

    I updated iTunes to 10.5 and now in my Netgear Stora iTunes server is not working anymore.
    Configuration: OSX Lion with Server, iTunes 10.5, latest firmware for the Stora.
    Can this be confirmed to be a bug introduced with 10.5 ?
    I also saw some people mentioning the same problem on Synology NAS.
    Seems like the 10.5 uodate broke something.

    Definitely seems to be a cross-platform bug in iTunes 10.5 concerning all NAS disks. Shared libraries on network drives worked fine under 10.4.1, but now there is just an endless loading cycle with no error message or time-out. There is a bit more about it in this thread.
    Martin

  • Why does right clinking on link and selecting open in new tab does not work?

    Why does right clinking on link and selecting open in new tab does not work?
    It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Server does not work in yosemite

    Help!  My OS X Server does not work after upgrade to Yosemite!  Disaster!!!

    After the disappointment that I cant manage the servers running the previous versions of OSX server from my upgraded desktop. I upgraded my office server to 10.10 Yosemite with OSX Server 4.0 I am still not able to connect.
    I can remote desktop into the server without a problem (both are on the same LAN with the server on .local). But the Server app is not able to connect.
    Actions taken so far:
    Update software on desktop to 10.10 and Server 4.0
    Update software on server to 10.10 and Server 4.0
    Verified connection by pinging IP and .local
    Verified to connect to the drive and screen sharing via local network
    Rebooted router + switch
    Rebooted desktop + server
    If you manage OSX servers for clients, keep a system on 10.9 around so you can still keep your business running.
    Upgrading the server needs to be done on site with display, keyboard and mouse connected.
    Apple please fix a.s.a.p.

Maybe you are looking for