Command For DISK analysis
I am new to Solaris. I have worked mostly on Linux. Currently I am working on Solaris 10 box. Looks like the command Fdisk does not exist in Solaris. A command "format" is similar, but when I type this command I still don't see anything, Pls see below. Am I in the wrong shell, or maybe my ID does not have root privileges.
-bash-3.2$ format
-bash: format: command not found
-bash-3.2$
Can someone pls assist...Thanks
If you are running Solaris x86 -- i.e. not SPARC -- then be aware that disks can be broken into "partitions" using a command like fdisk. These are the same partitions that DOS / Windows / Linux uses. Solaris will create a single Solaris partition. Within that Solaris partition, Solaris will subdivide the partition into "slices" which have more capabilities than partitions under DOS / Windows / Linux.
In the end, you will have a Solaris "partition" made by fdisk then that will have "slices" made by the format command. Beware of confusion because format will talk about a "partition" when it really means "a slice within the Solaris partition."
It can get kind of confusing.
Similar Messages
-
Hi
Are there any direct commands for verifying the capacity / number of disks available for the Z/OS system ?
Also, how do we create a file system partition (volume ) in Z/OSHi,
You can refer below mentioned links for required help
Z/Os MVS commands : http://www.mabu.org/ZOSCommands.pdf
Z/Os TSO/E commands : http://grothoff.org/christian/teaching/2009/3400/ikj4c580.pdf
DB2 for z/OS technical information and manuals : http://www-01.ibm.com/support/docview.wss?rs=64&uid=swg27011659#manuals
Hope this helps.
Regards,
Deepak Kori -
Got error with newfs command for disk on a Storagetek ST2540.
Hi,
It's the first time that use forum and I have pour english language.
I have Solaris 9 on Sunfire V480 with Qlogic HBA qla2340 connected to SAN ST2540.
I have 3 LUNs on virtual disk on ST2540 (2 X 2TB and 1 about 730 GB).
I can create a UFS file system on one of those 3 LUNs.
A UFS file sytem of 2 TB.
I got error on ohters like this.
newfs /dev/rdsk/c6t3d2s0
newfs: construct a new file system /dev/rdsk/c6t3d2s0: (y/n)? y
Warning: 2128 sector(s) in last cylinder unallocated
/dev/rdsk/c6t3d2s0: 4095981488 sectors in 666664 cylinders of 48 tracks, 128 sectors
1999991.0MB in 4662 cyl groups (143 c/g, 429.00MB/g, 448 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 878752, 1757472, 2636192, 3514912, 4393632, 5272352, 6151072, 7029792,
7908512,
Initializing cylinder groups:
...........................write error on sector 1182585152: I/O error
Log message in /var/adm/messages
scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/QLGC,qla@1/sd@3,2 (sd99):
SCSI transport failed: reason 'aborted': retrying command
I don't know which trace look for.
It is somebody has a idea?try the -T param for newfs. beware that you need a later edition of solaris 9.. 08/03 or so...
Edited by: sid_sanders on Sep 12, 2008 2:47 PM -
"Specific" command for memtest in terminal????
What is the "specific" command for memtest in terminal????
I've downloaded the 4.22 version of memtest installed okay and I can't get it to run.
I have a G4 MDD. Os is Tiger 10.4.11 I've run applejack countless times, Onyx as well, have corrected permissions and run disc repair as well
and I still have slowed up beachball frozen processing!!! across all my hard drives. Windows stall all my other open programs with a beachball then 14 seconds later it lets it allgo and the window opens. Every time after start-up. Any new window or program I open does same. After it's been initially clicked on, most windows open normal speed. This is excruciating. I've had this machine optimized professionally, and it was good for couple of weeks then it started slowing down processing again.
I thought to check the ram, but cannot run the memtest program!
What is the command sequence font per font and spaces to use in terminal?
Or how do I check if it's even recognized by my machine? I have used rember which came back okay, but, I know that it can't test the ram currently in use.
I've downloaded and checked memtest when installing applejack and also dwnloaded it seperately, but no go.
I would welcome advice and direction.
Thank you
EMy Machine:
G4 Mirror, 1,25 GHz , 2 GB (max ram) 10.4.11
Graphcs Crd- ATI Radeon 9000 Pro, VRAM 64MB
I have 3 internals HD's
Reason I want to check is my system is not only slow, but, freezes at random times. For example typing into test edit, while Firefox is open with one window. Or, I open a window in Finder and it takes 15 seconds for the request to complete, meantime all other applications freeze in those 15 seconds. Nothing works and I have 2 GB ram!
When problem started, I had a pro optimize the system - Checked all 3 HDs. found no bad sectors on any of them.
I have booted into 2 different drives and have the same problem: Beachball appears often. When opening windows in Finder, it hangs for about 10 -15 seconds. Sometimes it just stays rolling until I force shut it down. Every session it happens at some point. I don't need to shut it down every time, but, it is slow, as if a huge program is running in the background. BUT, I only have the browser open. It scrolls with a stutter often or beachball shows up when opening a new tab that is loading a page.
For the Primary Drive which is 300GB capacity:
Disk Usage - Space utilized - 141.54 GB
Space Free- 137.79GB
The Other Drive I boot into:
250GB capacity,
Space Utilized - 166.31MB
Space free 66.56GB
I'vee dumped these pref panes in Safe Boot -
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
It ran okay for a day, then it went right back to the same issue of slow-down and freezes. This happens even when there is no browser or when I use Safari.
I'm deeply frustrated, as I can't work profficiently on this machine right now, and it's the only one I have.
The memtest app is on my desktop...so is this the correct script? /desktop/memtest/memtest all 3 -L
I have super duper and I love it. Will get Disk Warrior.
I will have console and activity monitor open at all times,
Only reason I think it's possible bad ram is because the freezes are happening on my other drive as well. I get slow window beachballs when I boot into it! -
Pls help me to execute this code for pert analysis..
hi friend;
i m new in java and i have downloaded some code for pert analysis which is giving some exception called run time .so,pls tell how to give the i/p..bcoz i faceing some at tha time. aur if u have pls send me pert analysis code..
the code is below.......
thanks
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.StringTokenizer;
public class Proyecto {
* @param args
public static void main(String[] args) {
String texto = null;
int n = 0, t = 0;
Tarea tareas[] = null, inicio = null, fin = null;
try {
BufferedReader in = new BufferedReader(new InputStreamReader(
System.in));
texto = in.readLine();
n = Integer.parseInt(texto);
tareas = new Tarea[n];
inicio = new TareaInicio();
fin = new TareaFinal();
inicio.setNombre("Inicio");
inicio.setTiempo(0);
fin.setNombre("Fin");
fin.setTiempo(0);
for (int i = 0; i < n; i++) {
texto = in.readLine();
tareas[i] = new Tarea();
StringTokenizer st = new StringTokenizer(texto, ",");
String nombre, tipo, tiempo;
nombre = st.nextToken();
tipo = st.nextToken();
tareas.setNombre(nombre);
if (tipo.equals("F")) {
tiempo = st.nextToken();
tareas[i].setTiempo(Integer.parseInt(tiempo));
} else if (tipo.equals("A") || tipo.equals("P")) {
tareas[i].setTiempo(0);
texto = in.readLine();
t = Integer.parseInt(texto);
for (int i = 0; i < t; i++) {
String org, des;
Tarea torg = null, tdes = null;
texto = in.readLine();
StringTokenizer st = new StringTokenizer(texto, ",");
org = st.nextToken();
des = st.nextToken();
if (org.equals(inicio.getNombre())) {
torg = inicio;
} else {
for (int j = 0; j < n; j++) {
if (org.equals(tareas[j].getNombre())) {
torg = tareas[j];
break;
if (des.equals(fin.getNombre())) {
tdes = fin;
} else {
for (int j = 0; j < n; j++) {
if (des.equals(tareas[j].getNombre())) {
tdes = tareas[j];
break;
if (torg == null || tdes == null) {
torg.addConcecuente(tdes);
tdes.addAntecedente(torg);
} catch (IOException e) {
System.out.println("Error en entrada de datos");
fin.terminacionRapida();
inicio.inicioTardio();
System.out.print("Ruta Critica: Inicio, ");
for (int i = 0; i < n; i++) {
if (tareas[i].isCritico()) {
System.out.print(tareas[i].getNombre() + ", ");
System.out.print(" Fin\n");
System.out.println("Tiempo: " + fin.inicioTardio());
System.out.println(inicio.getNombre() + " holgura: "
+ inicio.getHolgura());
for (int i = 0; i < n; i++) {
System.out.println(tareas[i].getNombre() + " holgura: "
+ tareas[i].getHolgura());
System.out.println(fin.getNombre() + " holgura: " + fin.getHolgura());
import java.util.ArrayList;
public class Tarea {
private String nombre;
private int tiempo;
private int holgura;
private ArrayList antecedentes;
private ArrayList consecuentes;
private int iniciomasrapido;
private int terminacionmasrapida;
private int iniciomastarde;
private int terminaciontarde;
Tarea(){
this.antecedentes = new ArrayList();
this.consecuentes = new ArrayList();
void setNombre(String nombre){
this.nombre=nombre;
void setTiempo(int tiempo){
this.tiempo=tiempo;
public String getNombre() {
return nombre;
public int getTiempo() {
return tiempo;
public int terminacionRapida(){
this.iniciomasrapido=0;
for (int i = 0; i < antecedentes.size(); i++) {
if(((Tarea)antecedentes.get(i)).terminacionRapida()>this.iniciomasrapido){
this.iniciomasrapido=((Tarea)antecedentes.get(i)).terminacionRapida();
this.terminacionmasrapida=this.iniciomasrapido+this.tiempo;
return (this.terminacionmasrapida);
public int inicioTardio(){
this.terminaciontarde=999999;
for (int i = 0; i < consecuentes.size(); i++) {
if(((Tarea)consecuentes.get(i)).inicioTardio()<this.terminaciontarde){
this.terminaciontarde=((Tarea)consecuentes.get(i)).inicioTardio();
this.iniciomastarde=this.terminaciontarde-this.tiempo;
return (this.iniciomastarde);
int getHolgura(){
this.holgura=this.iniciomastarde-this.iniciomasrapido;
return this.holgura;
@SuppressWarnings("unchecked")
public void addAntecedente(Tarea t){
this.antecedentes.add(t);
@SuppressWarnings("unchecked")
public void addConcecuente(Tarea t){
this.consecuentes.add(t);
boolean isCritico(){
return (this.getHolgura()==0);
public class TareaFinal extends Tarea {
public int inicioTardio(){
return this.terminacionRapida();
public int getHolgura(){
return 0;
public class TareaInicio extends Tarea {
public int terminacionRapida(){
return 0;
public int getHolgura(){
return 0;Here is your code in code tags
* To change this template, choose Tools | Templates
* and open the template in the editor.
package proyecto;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.PrintStream;
import java.util.StringTokenizer;
public class Proyecto {
private static int i;
* @param args the command line arguments
public static void main(String[] args) {
String texto = null;
int n = 0, t = 0;
Tarea tareas[] = null, inicio = null, fin = null;
try {
BufferedReader in = new BufferedReader(new InputStreamReader(
System.in));
texto = in.readLine();
n = Integer.parseInt(texto);
tareas = new Tarea[n];
inicio = new TareaInicio();
fin = new TareaFinal();
inicio.setNombre("Inicio");
inicio.setTiempo(0);
fin.setNombre("Fin");
fin.setTiempo(0);
for (int i = 0; i < n; i++) {
texto = in.readLine();
tareas[i] = new Tarea();
StringTokenizer st = new StringTokenizer(texto, ",");
String nombre, tipo, tiempo;
nombre = st.nextToken();
tipo = st.nextToken();
tareas.setNombre(nombre);
if (tipo.equals("F")) {
tiempo = st.nextToken();
tareas[i].setTiempo(Integer.parseInt(tiempo));
} else if (tipo.equals("A") || tipo.equals("P")) {
tareas[i].setTiempo(0);
texto = in.readLine();
t = Integer.parseInt(texto);
for (int i = 0; i < t; i++) {
String org, des;
Tarea torg = null, tdes = null;
texto = in.readLine();
StringTokenizer st = new StringTokenizer(texto, ",");
org = st.nextToken();
des = st.nextToken();
if (org.equals(inicio.getNombre())) {
torg = inicio;
} else {
for (int j = 0; j < n; j++) {
if (org.equals(tareas[j].getNombre())) {
torg = tareas[j];
break;
if (des.equals(fin.getNombre())) {
tdes = fin;
} else {
for (int j = 0; j < n; j++) {
if (des.equals(tareas[j].getNombre())) {
tdes = tareas[j];
break;
if (torg == null || tdes == null) {
torg.addConcecuente(tdes);
tdes.addAntecedente(torg);
} catch (IOException e) {
System.out.println("Error en entrada de datos");
fin.terminacionRapida();
inicio.inicioTardio();
System.out.print("Ruta Critica: Inicio, ");
for (int i = 0; i < n; i++) {
if (tareas[i].isCritico()) {
PrintStream printf = System.out.printf(tareas[i].getNombre(), ", ");
System.out.print(" Fin\n");
System.out.printf("Tiempo: ", fin.inicioTardio());
System.out.printf(inicio.getNombre()+ " holgura: ", inicio.getHolgura());
System.out.printf(tareas[i].getNombre()+ " holgura: ", tareas[i].getHolgura());
System.out.printf(fin.getNombre()+ " holgura: ", fin.getHolgura());
}the a another class /*
* To change this template, choose Tools | Templates
* and open the template in the editor.
package proyecto;
import java.util.ArrayList;
* @author Kenneth Rinderhagen
class Tarea {
private String nombre;
private int tiempo;
private int holgura;
private ArrayList antecedentes;
private ArrayList consecuentes;
private int iniciomasrapido;
private int terminacionmasrapida;
private int iniciomastarde;
private int terminaciontarde;
Tarea(){
this.antecedentes = new ArrayList();
this.consecuentes = new ArrayList();
void setNombre(String nombre){
this.nombre=nombre;
void setTiempo(int tiempo){
this.tiempo=tiempo;
public String getNombre() {
return nombre;
public int getTiempo() {
return tiempo;
public int terminacionRapida(){
this.iniciomasrapido=0;
for (int i = 0; i < antecedentes.size(); i++) {
if(((Tarea)antecedentes.get(i)).terminacionRapida()>this.iniciomasrapido){
this.iniciomasrapido=((Tarea)antecedentes.get(i)).terminacionRapida();
this.terminacionmasrapida=this.iniciomasrapido+this.tiempo;
return (this.terminacionmasrapida);
public int inicioTardio(){
this.terminaciontarde=999999;
for (int i = 0; i < consecuentes.size(); i++) {
if(((Tarea)consecuentes.get(i)).inicioTardio()<this.terminaciontarde){
this.terminaciontarde=((Tarea)consecuentes.get(i)).inicioTardio();
this.iniciomastarde=this.terminaciontarde-this.tiempo;
return (this.iniciomastarde);
int getHolgura(){
this.holgura=this.iniciomastarde-this.iniciomasrapido;
return this.holgura;
@SuppressWarnings("unchecked")
public void addAntecedente(Tarea t){
this.antecedentes.add(t);
@SuppressWarnings("unchecked")
public void addConcecuente(Tarea t){
this.consecuentes.add(t);
boolean isCritico(){
return (this.getHolgura()==0);
then another class /*
* To change this template, choose Tools | Templates
* and open the template in the editor.
package proyecto;
* @author Kenneth Rinderhagen
public class TareaInicio extends Tarea {
public int terminacionRapida(){
return 0;
public int getHolgura(){
return 0;
}and then the tereaFinal class/*
* To change this template, choose Tools | Templates
* and open the template in the editor.
package proyecto;
* @author Kenneth Rinderhagen
public class TareaFinal extends Tarea {
public int inicioTardio(){
return this.terminacionRapida();
public int getHolgura(){
return 0; -
IPM 4.2 database for future analysis (LMS 3.2)
Hello,
How long can one keep IPM database for future analysis if one wants to keep statstical data for more than a year.
Is this possible? There is a chance to schedule for more that a year at the collector page. But it is may be to indicate the run-time but not the actuall collection of statistical data at the IPM database (NMSROOT/files/IPM/export/collectors?You can configure the purge intervals for Minute, Hourly, Daily, Weekly, and Monthly data under IPM > Admin > Purge Settings. By default, the monthly data is kept for an entire year. You can increase this provided you have the disk space to hold it.
-
Workshop 6u1 installation freezes when checking for disk space
Hi!
I've trying to install Workshop 6 update 1 but while installing and the application is checking for disk space it just freezes on me. One important thing, this system had Workshop 4, 6u1 and 6u2 installed. I removed the package for ws4 and untinstalled ws6u1 and ws6u2 from /var/sadm/prod/com.forte....... for each one of the versions.
Do you have any idea what is going on, why it freezes when checking for disk space???
thanks,
JorgeHi,
command: cmd.exe /c D:\oracle e-business suite R12\oracle ebusiness suite\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin C:\msvc
'D:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1Please do not use spaces in directory names, spaces are not allowed and it is expected to get such errors because of the spaces.
Host/Domain
command: ping -n 1 windows7-pc
Pinging WINDOWS7-PC [fe80::4c7b:9a58:f4b2:e7c5%12] with 32 bytes of data:Please note that Windows 7 is not certified as a database/application tier node.
Thanks,
Hussein -
Need Disk 2 for10.4.2 got stuck asking for disk 2
I purchased a used Imac G5 with 10.5 on it. I need 10.4 for a billing program I use. The Imac G5 install disk 1 came with the G5. I started the install and got 3/4 done, then it asks for disk 2. Bad news? No disk 2. The previous owner said he never used the disk and there is only the one I have.
Whenever I boot the computer, it turns on and asks for Disc 2. Is there any way to get in and take off the 10.4 update I did? That way I can go back to running 10.5 [I have no disk for 10.5 it was just loaded on the machine]. I can boot the computer using my external drive that has 10.4.11 on it. Any help is much appreciated.
I had to purchase this G5 because my Imac G4 15 flat panel was dealt a double power surge on Monday and died. Luckily Mac folks able to make a complete copy of the contents on the hard drive.
Thank you in advance, it has been quite a week.You can call Apple Customer Relations 800-767-2775 and they will send you the install discs for a small fee.
Do call them and have the serial # handy. But someone a couple of weeks ago, reported that Apple said they didn't have any more. (It was for iMac PPC (2005 I think). So if you get some Post back.
One thing you can try with the one disk, is before the install starts, click on the custom button, and uncheck as much as possible. When it ask for #2, I think its looking for applications to install and maybe X11. Good luck
Message was edited by: Dakota -
Need example vi using AT commands for dialing the modem at the remote end
Can any one give example vi for dialing up a modem and sending data to remote end
Hi sindhu6,
Presuming that you are connected to your modem via a serial connection:
I did find a forum related to your enquiry: http://forums.ni.com/t5/LabVIEW/AT-commands-in-labview/td-p/1213335
And I did find an example from ni.com: http://zone.ni.com/devzone/cda/epd/p/id/2577
Basically, what you need to do is to find out what are the AT commands used for your modem and send the command over using VISA related functions (e.g. VISA Read VI). You can send the command in a sequantial method. You can do this by using the method found in the first link. The best would be that you can create a state machine where by each case/state will consists of commands that you need to run in a sequence (let's say a sequence of AT commands for sending a message via TCP/IP communication).
You can also use a sequence structure but I would not suggest that since you cannot stop the sequence half way and if your command is very long, this may look pretty messy for your code.
The main question is:
What is the version of your LabVIEW?
What is the modem that you are using and how is your hardware setup is going to be (e.g. how did you communicate with your modem)?
Thank you
Warmest regards,
Lennard.C
Learning new things everyday... -
Questions on Commands for planning application
Hi,
1. Where can i get the information on commands for planning functions?
2. What is the difference between
---Execute planning function simple and -
Execute planning function
3. I create planning layout with few buttons
a. Copy: I clicked on the copy button and can see the data in the layout
b. Save: Clicked on the save icon, Data saved into the planning cube
c. Change. : clicked on the change and changed few values and then clicked on SAVE button. Data got saved into my planning cube.
Now I my requirement is when user open the planning layout, It should only be in display mode. But currently automatically all the keyfigures are in change mode (Is it because in query designer, I checked "Start query in the change mode?)
When user opens the planning layout, he should run the copy function, then should save the data into the planning cube and then should be allowed to chagne. Change button should be in active until data is saved into the plannigng cube. IS this possible?
Thanks
AnnieHi Deepthi,
Thanks for your reply.
I did as you mentioned and its working as expected.
User wants something like this
1. Execute the planning layout.
2. Click on the copy function
3. Save the data
4. Click on the change button so that data can be changed now.
As per your solution, without have change button its working perfectly. But now i want to have change button on the layout. Initially change button should be disabled. When i save the data then it should get active.
I did the following things but didnt work
1. Save button i have two commands
a. Save data
b. Set_item_parameters
2. Change button> disable>set_data_entry_mode.
After executing the layout. I could copy the data and save it. BUT after saving it change button is not getting active.
I think i did do something in save button (B). I just mentioned button group but didnt mention the change button. Can you please help me?
Thanks
Annie -
How can I use custom WLST commands for Oracle SOA Suite in Weblogic
Hi There,
I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
However, my WLST shell is not recognizing the commands and giving me the NameError!
wls:/devDomain1/domainRuntime> listLogs()
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: listLogs
I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
- Launched the WLST shell from Oracle Home.
cd ORACLE_HOME/common/bin
./wlst.sh
- Tried to run the listLogs command from domainRuntime()
I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
There is no SOA Suite installed.
Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
Please advise if this is possible and how?
Cheers.
SatishI have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
I hope this can help -
What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...
Go to
> System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough: -
How to add a new universe in population for Predictive Analysis
Post Author: izhar
CA Forum: Performance Management and Dashboards
Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Customers and Direct Products"
Any member please help me hereRegards IzharHi Anne,
It really depends on how your portal is set up. And there are 101 ways this could have been done.
I've used the Home Page Framework as an easy to define and extend framework to show applications. I've used it both for ESS and MSS, Using the HPF requires that an application has an iView in the portal.
The main point to be made here is that this is not a Web Dynpro ABAP specific question - but rather one about MSS portal implementation - you would probably be better posting a question in either one of the ESS/MSS or Portal forums.
As it is not a WDA specific question, I'd ask that you kindly close this thread and reopen in another forum.
Thanks for your understanding, it would be nice to be able to answer all questions in all forums (perhaps with some sort of tagging system) but currently forum rules are that questions must be specific to the forum posted.
Thanks,
Chris -
Command for "How to find Cursor Size" in Oracle Stored Procedure"
Hi
Can u tell me....
How to find Cursor Size" in Oracle Stored Procedure........
I want command for that........why don't you try select count(*) from your_table;That requires running the same query twice - or rather running two different queries twice. Besides it still doesn't guarantee anything, because Oracle's read consistency model only applies at the statement level (unless you're running in a serialized transaction).
This is such a common requirement - users are wont to say "well Google does it" - it seems bizarre that Oracle cannot do it. The truth is that that Google cheats. Firstly it guesses the number on the basis of information in its indexes and refines the estimate as pages are returned. Secondly, Google is under no onus to kepp all its data and indexes synchronized - two simultaneous and identical queries which touch different Google servers can return different results. Oracle Text works the same way, which is why we can get a count with CTX_QUERY.COUNT_HITS in estimate mode.
Cheers, APC
blog: http://radiofreetooting.blogspot.com
. -
Directory Damage, what can be used for Disk Repair and Virus Detection?
Hi,
My eMac is acting up. Yesterday I started getting these messages that I needed to restart my computer (message was in a brown box window with an icon of a start up button in background).
I did the disk repair using Start up CD and it came back with "invalid key......." or something like that, and when I tried to repair it, it tried to repair the B-Tree's but then said it could not repair the problem.
I have Diskwarrior 3.03 Build 39, on a CD and on my FW Ext HD, which has a clone of my Mac HD.
Diskwarrior could not produce a graph of Mac HD because the directory was damaged. When I did a rebuild it hung on step 9 comparing directories, said there was 7 million + tests. ( I let it hang on step 9 for 15 hrs. to see if maybe it was just taking a long time due to corrupt directory). I finally clicked on Skip and got to the report page. I could do a preview, but the replace button is greyed out. When I was comparing the sizes of each folder, in both preview and original, I got a can not calculate error message on a few of them. The size of Mac HD in preview compared to the one in Original was different by 4 gbs. A week ago I repaired the Mac HD and did a Diskwarrior directory repair on all my HD's.
Before I do any reformatting of HD or other drastic measures, I was wondering what is safe to use for disk repair and virus detection. I know there is Norton System Works 3.0, Norton AntiVirus and TechTool, are these the only ones? Are these safe to use? Are there any other programs that can repair directory damage?
Thank you in advance,
Deb
eMac 2005 1.42GHz Combo Drive 256MB Tiger 10.4 75GB Mac OS X (10.4) Western Digital (WD) 160GB FW Ext & WD 320gb Media FW Ext, Creative SpeakersThe long-standing rule of thimb has been that if Disk Warrior can't repair a mungled disk directory, then you're looking at reformatting or replacing the hard drive. Since this is a week-old hard drive, I'd suspect the replacement hard drive is itself bad. It might save you grief in the long run to contact the vendor who sold you the drive and inquire about their warrenty. You might want to first run the file system check utility fsck as described in Using Disk Utility and fsck
Directory repair and antivirus protection are different critters. Norton AV is mostly safe (if you don't mind it's track record of false positives) and is used by the IT department at the lab where I work. Norton SystemWorks, AKA Disk Doctor Kervorkian, is most assuredly NOT safe. For every poster reporting something nice about it, you'll find at least 2 dozen cursing it. It has a known track record of detecting problems no other utility finds and of "repairing" drives such that nothing can then read or repair the drive short of low-level reformatting (and occasionally even that fails).
Tech Tool Pro 4 has a good reputation, as does Drive Genius. Tiger OS X 10.4.2 and later include a version of Disk Utility that can for the first time also make effective B-tree and keys out of order and overlapped extent repairs. Still, my personal gut feeling is that if Disk Warrior is choking on the hard drive, you're looking at reformatring while zeros the drive (zeroing should detect and map out bad physical secotrs).
You can also refer to Disk First Aid: What to do when it finds an error and to Handling "overlapped extent allocation" errors reported by Disk Utility or fsck
Maybe you are looking for
-
Installing Java on a Windows Vista 64 bit OS - amd64 Turion X2
I do hope there is someone who has solved this issue. Spent several hours and multiple loads to no avail. Currently using a HP laptop with Windows 64 bit OS running. The processor is a AMD64 Tution X2. Java loads but no entry in Internet Options adva
-
Error message when opening itunes...The itunes library.itl cannot be read because it was created in a newer version of itunes... how do i fix, it will not open with any of my ipod, ipad, iphone.
-
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Dear Guys, We are facing issue during the upgrade from 4.6c to ECC 6.0 EHP4 in pre-processing phase, Checks after phase MAIN_SHDRUN/ACT_UPG were negative! Last error code set: Detected 257 errors summarizes in 'ACTUPG.ELG' Check logfiles 'ACTUPG.ELG'
-
Hey guys, recently purchased a MSI H55M-E21 mobo. Got everything setup and I am having a few issues with the BIOS. First, RAM is not listed at 1600Mhz which was listed on the site as being supported while OC. Most of the settings for this option have
-
Lock and unlock sharing DAQ PCI-6036E
Is there an example for lock and unlock a DAQ resource (PCI-6036e)? I'd like to protect it from different threads.