Command for proxy server /power suppliesinformation

Hi All,
I want to know the proxy server for my solaris 9 machine..in windows we check internet connection we can see the proxy server setting.
i want a command to see how many power supplies are connected to a sun solaris machine.
Thanks,
Pavi

I used my SunSolve account id directly to where the URL on the page normally take you.
wget http-user=XXXXXXX http-passwd=YYYYY http://sunsolve.sun.com/private-cgi/pdown
load.pl?target=120469-01&method=hs -O 120469-01.zip
Get the xref via:
wget http-user=XXXXXX http-passwd=YYYYYY http://sunsolve.sun.com/private-cgi/pdown
load.pl?target=patchdiag.xref
I've had to change this various times when Sun makes site changes though.
I thought I had an example with Perl LWP somewhere that takes the xref over http and creates a file handle out of it suitable for a (<while_file>) type of loop. Can't find that one though, must have scrapped it for some reason. If I come across it, I'll post it for ya.
I would think it wouldn't be to difficult to turn an xref file into something that smpatch -x could take and let it go get everything.

Similar Messages

Using ACE for proxy server load balancing

Hello groups,
I wanted to know your experiences of using ACE for proxy server load balancing.
I want to load balance to a pool of proxy servers. Note: load-balancing should be based on the HTTP URL (i can't use source or dest. ip address) so that
a certain domain always gets "cached/forwarded" to the same proxy server. I don't really want to put matching
criteria in the configuration (such as /a* to S1, /b* to S2, /c* to S3,etc..), but have this hash calculated automatically.
Can the ACE compute its own hash based on the number of "online" proxy servers ? ie. when 4 servers are online, distribute domains between 1,2,3,4 evenly.
Should server 4 fail, recalculate hash so that the load of S4 gets distributed across the other 3 evenly. Also load-balancing domains of S1 ,S2 and S3 should not change if S4 fails.....
regards,
Geert

This is done with the following predictor command:
Scimitar1/Admin# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Scimitar1/Admin(config)# serverfarm Proxy
Scimitar1/Admin(config-sfarm-host)# predictor hash ?
address         Configure 'hash address' Predictor algorithms
content         Configure 'hash http content' Predictor algorithms
cookie          Configure 'hash cookie' Predictor algorithms
header          Configure 'hash header' Predictor algorithm
layer4-payload Configure 'hash layer4-payload' Predictor algorithms
url             Configure 'hash url' Predictor algorithm
Scimitar1/Admin(config-sfarm-host)# predictor hash url
It does hash the url and the result takes into account the number of active proxies dynamically.
This command has been designed for this kind of scenario that you describe.
Gilles.

New command for radius-server source-ports

I am trying to find the new command fro radius-server source-ports 1645-1646 since it appears to be depricated. We use tacacs so we do not have the radius server specified but we do need to put in the ports. Can someone please tell me the new command for radius-server source-ports?
Thanks

Both of the links that Peter posted are interesting and helpful. I would like to take a slightly different approach in answering your question.
In every version of IOS there are certain commands that get inserted into running-config when a particular feature is activated. It looks like in your version the radius-server source-ports is one of those commands. I do not think it is anything that you should be concerned about.
And I do not believe that having the radius-server source-ports command would prevent TACACS from working. I believe that there is likely to be some fault in your configuration. If you would post the aaa parts of the config then maybe we could see what the problem is.
In my experience configuring aaa some of the common problems include not correctly identifying the TACACS server, not having exactly the same key configured on the Cisco device and the TACACS server, not having connectivity to the TACACS server (can the Cisco device ping the server, and can the server ping the device), or errors in the authentication or authorization prameters specified.
Post some information and we will see what we can do.
HTH
Rick

API for Proxy Server Connection

Hi,
can anybody tell me any API for Proxy Server Connection in java EXCLUDING
httpclient(apache) and setting system setting and making a urlconnection.

hey thanx for replying
Firstly i clear my requirement
I want some other way of connecting to Proxy Server Irrespective of Httpclient and setting system properties and then making url Connection ,these ways are clear to me .
I found one API HTTPClient (not belonging to apache Httpclient) its different
u check this at
http://www.innovation.ch/java/HTTPClient/api/index-all.html#_S_
But the problem is this API Does't support NTLM
i tried to found higher version of this API but i did't get .
API should support :
1. NTML
2.JDK 1.4
3.SOCKS (not necessary)
4.HTTP protocol (other like FTP ... not necessary)

Windwows activation URLs for proxy server

Hi,
I need to know what Microsoft's URLs I have to enable/enter in PROXY to make Windows activation work?
If I enter *Microsoft.com it works. Without this entry I get 0x80072f8f.
Thanks.
Michael.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Hi,
You can configure the proxy server to disable Basic authentication.
Also, you can configure your proxy server to exclude the URLs for the certificate revocation lists (CRLs) from the requirement for Basic authentication.
http://go.microsoft.com/
https://sls.microsoft.com/
https://sls.microsoft.com:443
http://crl.microsoft.com/pki/crl/products/MicrosoftRootAuthority.crl
http://crl.microsoft.com/pki/crl/products/MicrosoftProductSecureCommunications.crl
http://www.microsoft.com/pki/crl/products/MicrosoftProductSecureCommunications.crl
http://crl.microsoft.com/pki/crl/products/MicrosoftProductSecureServer.crl
http://www.microsoft.com/pki/crl/products/MicrosoftProductSecureServer.crl
https://activation.sls.microsoft.com
http://support.microsoft.com/kb/921471
Hope this helps.
Jeremy Wu
TechNet Community Support

I upgraded to 8.0 and browser says its configured for proxy server and will not load pages. I dont run through a proxy

I have had firefox since this computer was new and never had an issue. when I was prompted to update to 8.0 I thought nothing of it... but since it updated I get the error screen with: '''The proxy server is refusing connections'''
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Creative Cloud is asking for proxy server username and password - what is this?

how do I find out the proxy server username and password

Krisw30568123 do you utilize an authenticating proxy server? If so then you will need to enter the proper credentials to access the Internet.

Cannot use browser asking to contact for proxy server

cannot go to any web pages asking to contact you for proxy server

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Os command for ftp server

I use file adapter receiver channel to transfer messages to external ftp servers. After a file is transported to the ftp server completely, I need to run a OS command to rename the file accordingly.
My question is where I should put the OS command file? On XI or ftp server? Any blog on this topic available?
Thanks!
Regards,
Hui

Hi,
Try using RUN OPERATING SYSTEM COMMAND AFTER MESSAGE PROCESING and RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESING.
You just post ur output file in some folder(Target) , lets say /usr/sap/sapout/test/.and the shell script in this path /usr/sap/bin/convert.sh (use ur Rename logic here).
Inside the File access parameters put target directory and filename scehme and for shell script give processing parameters as File construction mode , File type and OS Command and use a space after the shell script name and the %F.
And for input can use it directly.
For the shell script (which u will use to rename the file after processing) you can put anywhere inside /INTERFACE/XI/ but athe time you provide the pat it will be exactly matching as from where you are using the Shell Script and the file at the coressponding places. It shud be in XI. Thats it and u r done.
Check out these links. First one will help you in acheiving want you want.
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
http://help.sap.com/saphelp_nw70/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
I hope this will solve your problem
Regards
Aashish Sinha
PS : reward points if helpful

JVM settings for proxy Server

Hi All,
Are there any guidelines/standards/considerations for configuring the JVM setting for TCP-Extend proxy nodes ?
Regards
S

Hi S,
For Proxies we should put the following JVM Arguments in Firewall environments :
set JAVA_OPTIONS= %JAVA_OPTIONS% -Dhttp.proxyHost=HostName -Dhttp.proxyPort=9999
As described in http://weblogic-wonders.com/weblogic/2010/03/29/firewall-issues-while-parsing-dtdsxsds/
Thanks
Jay SenSharma

How do I stop server from looking for proxy server at 127.0.0.1?

My system log is getting clogged with continuous attempts by the system to connect with 127.0.0.1, what I believe is a proxy address, with an error message router connection failed, broken pipe.
I'm using a Mac Mini running OS X 10.6 server with a Time Capsule / Airport Extreme base station.
I don't know why this service is running and I'd like to stop it if it's not necessary.
Jim

My system log is getting clogged with continuous attempts by the system to connect with 127.0.0.1, what I believe is a proxy address, with an error message router connection failed, broken pipe.
I'm using a Mac Mini running OS X 10.6 server with a Time Capsule / Airport Extreme base station.
I don't know why this service is running and I'd like to stop it if it's not necessary.
Jim

What is the commands for SQL server job to ftp file to remote server?

I created the job to bcp data out and create file on file system. after that, I need to ftp the file over to another box. how can I do it from sql server job?
JulieShop

I would like to suggest a SSIS package with a
FTP Task instead.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Tuning/Sizing guide for Proxy server 4.0

Edit: posted here by mistake, moved the post here

Hello,
What's the progress on this? We'd love to see it.
Thanks

Popping up a dialog box on client side for authentication in a proxy server

hi all,
we have wriiten a code for proxy server.now we want to add the authentication code in the same which will authenticate client by popping up a dialog box on the client side.though no code runs on the client side.only the client has to open the browser and enter the credentials.
we dont know how to pop up this authentication window on the client side when he requsts for the service.
Its almost like a SQUID where the pop up box appears.
The code for our proxy server is
import java.net.*;
import java.io.*;
public class BasicProxyServer {
     private static int serverPort;
     private static String primaryServerHost;
     private static int primaryServerPort;
     // 1st arg: port to listen on     // 2nd arg: primary server IP     // 3rd arg: primary server port
     public static void main(String [] args) {
          serverPort = Integer.parseInt(args[0]);
          primaryServerHost = args[1];
          primaryServerPort = Integer.parseInt(args[2]);
          BasicServer bserv = new BasicServer(serverPort,primaryServerHost,primaryServerPort);
class BasicServer extends Thread {
     private int serverPort;
     private String primaryHost;
     private int primaryPort;
     private ServerSocket servSock = null;
     public BasicServer(int port, String primSrv, int primPort) {
          serverPort = port;
          primaryHost = primSrv;
          primaryPort = primPort;
          start();
     public void run() {
          Socket clientSock = null;
          Socket primaryServerSock = null;
          try {
               servSock = new ServerSocket(serverPort);
          catch (IOException e) {
               e.printStackTrace();
          while(true) {
               try {
                    clientSock = servSock.accept();
                    primaryServerSock = new Socket(primaryHost, primaryPort);
                    PipedInputStream fromClient = new PipedInputStream();
//BufferedReader br= new BufferedReader(new InputStreamReader(clientSock.getInputStream()));
//String ipline=br.readLine();
//History hi=new History();
//hi.writeHistory(ipline);
//try{
//hi.getHistory();
//catch(ClassNotFoundException cne){
// System.out.println(cne);
                    PipedOutputStream toMainServer = new PipedOutputStream(fromClient);
                    PipedInputStream fromMainServer = new PipedInputStream();
                    PipedOutputStream toClient = new PipedOutputStream(fromMainServer);
                    Talk clientToMainServer = new Talk(clientSock, fromClient, primaryServerSock, toMainServer);
                    Talk mainServerToClient = new Talk(primaryServerSock, fromMainServer, clientSock, toClient);
                    clientToMainServer.start();
                    mainServerToClient.start();
               catch (IOException e) {
                    e.printStackTrace();
protected void finalize() {
if (servSock != null) {
try {
servSock.close();
} catch (IOException e) {
e.printStackTrace();
servSock = null;
class Talk extends Thread {
     private Socket incoming;
     private Socket outgoing;
     private InputStream in;
     private OutputStream out;
String urlrequest="";
     private InputStream from;
     private OutputStream to;
     Talk(Socket inSock, InputStream in, Socket outSock, OutputStream out) {
          this.in = in;
          this.out = out;
          incoming = inSock;
          outgoing = outSock;
     public void run() {
          int aByte;
          try {
               from = incoming.getInputStream();
               to = outgoing.getOutputStream();
               while(( aByte = from.read()) != -1 ) {     //read from socket
                    out.write(aByte);
if(new Integer("3128").equals(incoming.getPort()))
urlrequest=urlrequest+out.toString();
urlrequest=urlrequest+incoming.getPort()+outgoing.getPort();
// write to pipe`
                    // read the byte from the pipe
                    to.write(in.read());          // write it to the output socket stream
                    to.flush();
System.out.println(urlrequest);
               to.close();
               from.close();
               if(incoming != null) {
                    incoming.close();
                    incoming = null;
               if(outgoing != null) {
                    outgoing.close();
                    outgoing = null;
          catch (SocketException e) {
          // there is one for a closed socket. Seems to have no effect.
          //     e.printStackTrace();
          catch (IOException e) {
               e.printStackTrace();
waiting for reply.....

Install a java.net.Authenticator.

Single-point failure of proxy server??

Three questions regarding using the proxy server for WLS clustering:
          1. What happen if the proxy server fails? The entire cluster won't be
          accessible?
          If so, is there a implication of having "meta-configuration" for
          proxy server failover?
          2. Does the term "in-memory persistence" clustering (over JDBC) does
          imply
          the session data is "shared" in memory between the primary &
          secondary
          servers, or they are compleleted replicated in each server??
          3. How bad is it in terms of performance using the JDBC session
          persistence
          and the in-memory replication? Any one has experimented it??
          Any thoughts and comments are helpful and appreciated??
          Frank Wang


Frank,
          If using File/JDBC persistence, it doesn't matter which server gets the request
          because all servers have access to every session's data.
          When you assign a hostname "to the cluster" and map that hostname to the IP
          address of each server in the cluster, this sets up something called DNS
          round-robining. What this does is round-robin which IP address is returned when
          the cluster hostname is resolved. Unfortunately, DNS is not very good at
          detecting failed machines so it may continue to hand out IP addresses of failed
          machines.
          A better way to do this is with a hardware router that is made for this purpose
          (e.g., LocalDirector). The router can detect a failed machine and redirect the
          request to another machine in the cluster. Unlike the in-memory replication
          case, it doesn't matter which server gets each request so no proxy is required.
          Hope this helps,
          Robert
          Frank Wagn wrote:
          > Hi, Robert,
          >
          > Thank you for the answers !!
          >
          > It is still not very clear to me when using the File/JDBC session
          > persistence.
          > Since there is no such a "coordinating" proxy server who knows how to
          > load balancing among the servers in the cluster (based on the specified
          > algorithm in the proxy server properties file), how does the load balancing
          > (and failover) work, when the requests are directed to a "mask" of cluster IP
          >
          > (virtual proxy) which in terms broadcast to all the servers??
          >
          > Frank
          >
          > Robert Patrick wrote:
          >
          > > Hi Frank,
          > >
          > > Frank Wang wrote:
          > >
          > > > Three questions regarding using the proxy server for WLS clustering:
          > > >
          > > > 1. What happen if the proxy server fails? The entire cluster won't be
          > > > accessible?
          > > > If so, is there a implication of having "meta-configuration" for
          > > > proxy server failover?
          > >
          > > If you have a single proxy server, this is correct in that it is a single
          > > point of failure. A common configuration is to use multiple proxy
          > > servers (with something like LocalDirector sitting in front to do routing
          > > and load balancing to the proxy servers) that proxy requests to a cluster
          > > of WLS servers.
          > >
          > > > 2. Does the term "in-memory persistence" clustering (over JDBC) does
          > > > imply
          > > > the session data is "shared" in memory between the primary &
          > > > secondary
          > > > servers, or they are compleleted replicated in each server??
          > >
          > > HttpSession state can be shared across the servers in a cluster in one of
          > > three ways.
          > >
          > > 1.) Using File-based persistence (i.e., serialization) - This requires a
          > > shared file system across all of the servers in the cluster. In this
          > > configuration, all servers are equal and can access the session state.
          > > As you might imagine, this approach is rather expensive since file I/O is
          > > involved.
          > >
          > > 2.) Using JDBC-based persistence - This requires that all servers in the
          > > cluster be configured with the same JDBC connection pool. As with method
          > > 1, all servers are equal and can access the session state. As you might
          > > imagine, this approach is rather expensive since database I/O is
          > > involved.
          > >
          > > 3.) In-memory replication (not really persistence) - This scheme uses a
          > > primary-secondary replication scheme so that each session object is kept
          > > on only two machines in the cluster (which two machines vary depending on
          > > the particular session instance). In this scheme, we need a proxy server
          > > sitting in front of the cluster that can route the requests to the server
          > > with the primary copy of the session for each request (or to the
          > > secondary if the primary has failed). The location information is
          > > encoded in the session id and the proxy knows how to decode this
          > > information and route the requests accordingly (because the proxy is
          > > using code supplied by BEA -- the NSAPI or ISAPI plugins or the
          > > HttpClusterServlet).
          > >
          > > > 3. How bad is it in terms of performance using the JDBC session
          > > > persistence
          > > > and the in-memory replication? Any one has experimented it??
          > >
          > > JDBC session persistence performance is highly dependent on the
          > > underlying DBMS. In my experience in doing benchmarks with WLS,
          > > in-memory replication (of a reasonably small amount of session data) does
          > > not add any measurable overhead. Of course, the key words here are
          > > "reasonably small amount of session data". The more data you stuff into
          > > the HttpSession, the more data that needs to be serialized between
          > > servers, more performance will be impacted.
          > >
          > > Just my two cents,
          > > Robert

Command for proxy server /power suppliesinformation

Similar Messages

Maybe you are looking for