Command-s in a text box

Could anybody please confirm/deny the following behavior on Safari (8.02) running Yosemite (10.10.1)?
When in a text box - such as the one I am typing in write now to ask this question, if you press command-s this somehow is a "post" or "submit" command as opposed to the usual "save" command.
Thanks.

It depends on the coding(if any) for that text box; some sites use JavaScript or other methods to intercept keystrokes.
(119297)

Similar Messages

Command button selects whole text box

I thought the keyboard shortcut for moving between paragraphs was command + up or down arrow, however as soon as I press the command button it selects the whole text box??

It works for me.
It should work for you unless you've redefined the keyboard shortcuts. Look in Edit > Keyboard Shortcuts > Product Area: Text and Tables > Move to the next paragraph/Move to previous paragraph.

Solved: InDesign CC: Problems with text in text box: text flows around invisible object

I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
Solution:
There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

Arthur, Garry
Would be great if you could send the files as attachment in an email to [email protected]
Else, you may post here using these steps: http://forums.adobe.com/message/3994281
Thanks!
- Neeraj

Scaling a Text box in InDesign CS3?

I am trying to scale a linked text box and cannot get it to work 100% of the time. I have a 64 page document that is one text box linked with three columns per page. Because the size of the type varies, i need to stretch or squish the individual columns slightly to get them to all line up at the bottom of the page. I have been able to get this to work some of the time by using command (Mac) and dragging the box up or down. I do not want the text to flow when i stretch or squish the box. Any thoughts on how to get this to work all the time. I AM FRUSTRATED! HELP!?

There's a pretty good chance this is actually a font-related problem. There are some issues that have become clear since CC was released earlier this week. Try testing your fonts to see if you can isolate one or more that may be casuing trouble: Troubleshoot font problems | Windows

How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save. I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was. I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink." That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box. But as soon as I save (command S), the text box reverts to a hyperlink.
If I don't click save and move around the pages, it does not revert to a hyperlink. It only reverts to a hyperlink when the file is saved. Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
The website page is: http://www.usronline.net/USR/VedicResearch.html. If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file. This should not be, but I can't get this hyperlink to go away for good.
Many thanks in advance.
Vishnupriya

Please pardon the reply delay--a big project deadline had to be met. Now back to this work:
Yes, the text in the oval object had a drop shadow (the oval object itself did not). I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object. I deleted the text and then the image file icon disappeared. But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again. I deleted the oval object entirely and simply typed the text inside the main text box itself. The image file icon that was attached to that oval object is gone (along with the oval object).
Still the image file icon is attached to the main text box, though. I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink.
Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one). Still in the new text box with the pasted text, the image file icon shows in the upper right corner.
I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond." I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
Thank you.

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

Passing parameters to the SQL Report from a text box in jsp

Hi All,
I want to dynamically generate the SQL Server Reporting Services by passing the query parameter from the url like this :
"http://localhost/Reports/Pages/Report.aspx?ItemPath=%2fDashboardReports%2fHorse_Profile&rs:Command=Render&rs:HorseID=117415"
Where horseid id my parameter which is needed by report to generate the required data.
This query paramter value is picked from the text box on my jsp page.
But my problem is when i go to this url it says the message
"The 'HorseID' parameter is missing a value ".
I have done a lot of search on this topic. Everybody says that we can pass the values from the url like i am using. But still its not working.
Any body has any idea please give me some idea.
Regards.

If you receive a picture via email or text message in ios 7 and when you press the action icon to save the picture and you do not get the option to save to your camera roll. Press and hold on the the image and you will get an overlay pop up to save the image. I have no idea why some attachments don't have option in action menu to save in the camera roll but by experimentation and earned frustration I found the above to work in certain situations.
Be well and have fun and feel rewarded in your frustrations. For without challenges, life would be an utter bore.

Error when embedding a formula field in a text box in a subreport

I am rewriting an application that merges data from a .net application into a Crystal Report template and displays it in the application. In VS2003, I have had no problems with the reports as they are written. In VS2010, I get an unusual error on some reports with subreports.
In one report I have multiple subreports. In those subreports, I have formula fields. If I take one of those formula fields and embed it into a Text Box and attempt to generate the report through the application, I get the following error:
This field name is not known.
Details: errorKind
Error in File Confirm {20564DCB-5CA4-4832-8931-DF1CC6C54784}.rpt:
Error in formula optionStrike:
'{Command.OPTIONSTRIKETIME}'
This field name is not known.
Details: errorKind
If I take the very same field out of the text box and put it directly on the report, the report will generate without error.
In the case above, OPTIONSTRIKETIME is a string field. This rules out any conversion errors from a date/number/etc to string for the text box.
Has anyone else encountered this error? If so, what can be done to avoid it?

Hello,
Thank you for the info.
Which driver are you using for the dataset?
If you are using ADO.Plus add this to your App.Config file:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
Thank you
Don

No text in form text boxes

I have been sending out forms to be filled out in Adobe. So far, most of them come back with no issues. But recently, I have started to get them back where the text in the text boxes doesn't show up unless I click in the box. The text doesn't print when the form is printed, so that is a problem. I did some digging and it seems that the problem stems from people filling out the form in Preview mode as opposed to the regular Reader mode. So my question is two-fold.
1. Is there a way to make it so that the form cannot be filled out in Preview mode, but will prompt the user to open it up in Reader?
2. How can I fix the forms I already have? I read something about importing and exporting the form data, but I cannot see where to do that.
I am using Adobe X Pro on a Mac, and I am NOT a power user, so please be very detailed in your answers about where I find commands.
Thank you,
Michele

I figured that much out.
My question was how do I prevent these problems? I saw another discussion (over a year old) that said something about importing and exporting the data, and another answer that mentioned turning off the ability to fill out the forms in Preview.
So my questions were how to actually perform those "fixes" since I can't seem to find any sort of 'import/export/ command in Adobe Pro X nor can I find anything about locking the form from being filled out in Preview mode.
Thank you.

I am unable to print the full content of a text box within a PDF that was emailed to me - help!

I open the pdf in Adobe Reader, and can see all of the content on screen by scrolling within the text boxes. But, because the content is "bigger" than the text box in some cases, when I print the pdf, the text gets truncated. Can I print in a way that allows me to see all text that the user entered?
Thanks in advance for any guidance.

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Keyword tags text box poorly designed, crashes PSE 8

I was very interested to see that PSE 8 allows you to enter keyword tags using a text box, as other programs do, promising much faster tagging with large sets of tags. But the feature has serious bugs rendering it unusable.
After trying the keyword-tags text box for less than a minute on my large catalog with 426 tags, PSE 8 crashed.    Even with a fresh catalog and the default tag categories, it will crash after using the text box about 40 times.   (See below for a recipe.)
Another bug concerns tags with commas in them, e.g. "Truckee, CA" (I have a couple hundred such Place tags). If you type "Tru" in the text box, select the tag with the mouse, and hit enter, PSE 8 will create two new tags, Truckee and CA, in the Other category, and apply them to the photo.
A design misfeature: After you select and apply a tag with the text box, it loses the keyboard focus. So to select another tag for the same photo, you have to move your hand to the mouse and click in the text box again. Partially defeats the whole purpose.
Recipe for reproducing the bug:
1. Create a new catalog.
2. Import 50 photos.
3. Select the next photo.
4. In the keyword tag text box, type "p" and then enter.
5. Go to step 3.
On the 40th or 41st photo, my PSE 8 reliably crashes (Vista 32, 4 GB of memory).   If after step 1 you use the Keyword Tags > + > From File command to load a tag heirarchy of 210 tags (see the attached file), it will crash after just 9 photos.   And with 426 tags, it crashes after 5 photos.
Interestingly, on my Vista 64 system (unsupported by Adobe, 8 core x 2.7 GHz), PSE 8 doesn't crash, but the text box gets unusably slow very quickly. WIth 210 keyword tags in the catalog, it soon takes about 12 seconds to find a tag after you type a unique prefix.   That time gradually gets longer the more you use the text box. With 426 tags, it takes almost 20 seconds to apply a tag using the text box.
On both systems, it's clear what the nature of the bug is: Each time you use the text box, the process's memory grows by many megabytes. I believe my Vista 64 system doesn't crash (at least not immediately) because it provides 3.5 GB of memory for use by PSE 8, while Vista 32 only provides about 1.5 GB.
I'm getting a sinking feelilng...

Is the white triangle to the left of "Keyword Tags" pointing down or pointing to the right? See this screen shot:
Click on the white triangle -- does that make a difference?
If not, try deleting the Organizer's preferences:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#Delete_the_Organizers_prefe rences

How to get rid of the main text box in the back of the page AND move things

I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

Hi, Dylan. Welcome to Discussions.
If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
Also, you can create a text box the width of the page and then set it for 2 or more columns.
When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
Hope this helps to get you started.
Walt

How do I remove text boxes from Pages

I have an awful time with Pages on my lap top. I am used to Appleworks 6.2 on my older desktop (PowerMac G4 / OS 10.4.11). If I specify a US letter page I get that in Appleworks, it is then 8.1/2" x 11", without running into pre-existing formats or other similar distractions. I can immediately type a neat business letter.
Not with Pages. On my MacBookAir, with Pages 4.3 and OS 10.8.4, I can type alright, but when I want to print what I typed, only a small part of what I typed shows up in in Print Preview of my typed page. After a bit of backtracking, I notice a blue-lined rectangle on my typed page containing the portion of my typing that appeared in that Print Preview. It is apparently a self-formed "text box", that was not a part of my blank template page and was not inserted by me while or just before I typed.
I did not find any way to delete the edges of that text box. The "delete" option under the pull down edit menu is blanked out. If I click on the "Text box " symbol in the menu bar it does not let me switch off the text box, but instead gives me another text box inside the first one! I suppose this is to allow user to print only a single keyboard stroke of the entire letter. The "Inspector" seems to have no options to set text boxes.
Pages "Help" Menu has nothing of how to delete a text box, or how to prevent it in the first place from screwing up what you have typed in such manner that it becomes unprintable.
Similarly a small rectangular box formed on both the top and the bottom of each page (which could be a space reserved for a header or footer), but again I do not use these on my business letters, and they appear self-formed by Pages, and I would like to know how to prevent them, or delete them.
In other words I like to get a blank page to start with, which will only set up and type what "I, THE USER" enter on my keyboard.
Can anybody tell me how to this with Pages?
(PS. I can do it with even with Thunderbird !)

1. Open a blank Word Processing template (they are listed in the Template Chooser sidebar), you have opened a Layout template that requires Textboxes for you to type into.
2. To select a Textbox hold down the command key and click on its edge or lassoo it, then hit delete.
3. If you don't want Headers or Footers, uncheck them in the Document Inspector
4. Download the Pages09_UserGUide.pdf from under the Help menu and familiarise yourself with Pages' basics. Also look around your Menus and Inspectors which are laid out logically from left to right from broad to details.
I suggest you click inside your textbox first go command a and copy the contents before you delete it and then paste that into a new Word Processing template.
Peter

Control of Text box in Dialog programming

Hai Friends
i am having problem in controlling the Text box in PAI of Screen. For eg. if it is command button with the use of Function name i can able to check or do validation in PAI.
As in the case of Textbox how to give the name for the text box and how to handle it in PAI for Validation.
Please
Badhri.

Are you talking about a text editor? IF so, what is the validation that you want to perform. Do you want to check to make sure that the user has entered something in the text editor?
If so, then just get the text from the text editor into an internal table, and check that internal table to make sure that something is in it.
    call method editor->get_text_as_r3table
       exporting
             only_when_modified = c_textedit_control=>false
       importing
             table              = textlines
       exceptions
             others             = 1.
<b>    if textlines[] is initial.
      message e014.
    endif.</b>
Regards,
Rich Heilman

How to populate multiple text boxes by selecting a value from drop down

I apologize in advance if this is redundant, but I have searched this forum relentlessly to no avail. I have a form connected to an MS Access database. The database is linked to another datadase on an Advantage server. This is dynamic data that has an ODBC driver allowing to link access tables to the Advantage data. Macros on access updates the table being used on this form. The livecycle form connects to the access data via a DSN on a machine that uses acrobat (not reader). This is a physician office, this form should expedite ordering radiology tests on patients. The plan is to use a drop down to select a chart number that will trigger several text boxes to populate dynamically with the corresponding demographic values like name, age, insurance etc.
Using a data drop down I am able to select the chart number. When I used the example from the office supplies database, so that a button will trigger the event with the following code:
if (Len(Ltrim(Rtrim(SelectField.rawValue))) > 0) then
$sourceSet.DataConnection.#command.query.commandType = "text"
$sourceSet.DataConnection.#command.query.select.nodes.
item(0).value = Concat("Select * from OfficeSupplies Where ID = ", Ltrim(Rtrim(SelectField.rawValue)) ,"")
I recieve a syntax error, despite adjusting quotation since I am using text rather than numeric fields.
My question is the following:
Is there a simple javascript that I can use to populate these text boxes (which may be read only but would be better if it allows user input)? Or does anyone recommend an alternative method? I would be happy with a link that solves this problem if someone can provide. I am somewhat familiar with js but open to any suggesstion.
Thanks
PS this form could also be linked to a Sequel database if that offers an advantage.

The View object API has a setQurery() method that you can use to set the query as needed before executing it via executeQuery(). You can do this in a custom Application Module method exposed to its client interface and bound to the binding layer. You can call this method from your backing bean on a value change listener.

Command-s in a text box

Similar Messages

Maybe you are looking for