Comment or attach document for specific cell of data

Dear all,
Is it possible to create comment or attached document for specific cell of data in Webi report?
For example, the sales of certain product & yearmonth is lower than previous month. I want write some comment for that cell of data . Which function should I use? I try the "Discussion" function. But, it's for the whole report not for certain range of data and I can't attached document in there. Please advise.
Thx,
Jeff

Hi Jeff,
This one is the most popular request from most of our customers. But what we always tell the client is that the reports that are created in webintelligence are analytical in nature and it is not cell based. For every refresh of the report, you may get different results based on the parameters and your annotation will not hold good.
We suggest two methods to solve this issue. 1) Discussions - Standard text with the parameters used for refreshing and the observation. This would be a good option if the report is shared with many people.
2) Add a cell to the report, place it at the right place adjacent to the block which you want to observe. Make your comments in different colors. This would be good for reports which need to be presented to some audience.
The below link shows a prototype called Comment It for Crystal Reports. But I don't think this is available for webintelligence.
Comment it [original link is broken]
Thanks
Mohanraj CP
http://blog.mohanraj.org

Similar Messages

Attaching Document Infotype specific Subtype Specific

Hi,
Requirement is to attach a JPEG file for an employee number which will be infotype specific and subtype specific.
Details. Need to attach document for an employee whenever leave record is getting created in 2001 infotype subtype 0200.

anybody help, please!?

Search files for specific lines of data

Hi all, I have a problem that I hope someone can help me with.
I need to find a way to search for specific lines of data on a file.
Here's the setup.... say for example I have 10 files, each filled with log files containing data like the date they were created and also certain information they were monitoring.
From a Java applet, a user types in information that they want (for example, only lines that were created between 2002/04/04 and 2002/05/05 and only ones tagged with "Caution"). I need a way to grab all of those line from each of the files, without having to open each file, read each line and check for each search request. Instead, I want to simply grab all of the data at once, or at the very least, grab all of the data from the first file, then grab all of the data from the second file etc, without having to search each individual line. (the reason I'm hoping for a command like this is because there will eventually be thousands of files that need to be searched, and opening each one, and then search each line one by one would take too long.
Sort of like a grep command in Linux. Does Java have a similar command?
Any information or samples would be greatly appreciated!

I don't know how much control you have over the files that you have to search.
Searching XML files would be a lot easier because XPATH queries will work exactly like SQL... The only problem being if your files are not XML at all.
If you have control over the format of these files you are trying to search, then try XML... else you might have to write a batch utility that runs every N seconds and converts data in these files to XML format files conforming to a specific format and then your applet could query the XML files.
There will be a small concurrency issue there, though; As there will be at least some time consumed by the thread.

Attached document for data column in BPS Web application

Hi,
I have created layout for a BPS application, the layout has been configured to have the ability to allow the used to create the attached documentd for the data column. when the user open the layout through the planning profile, the icon for those documents is displayed and can be open by click those icons. After we generated the Web applicatios, those icons are gone and the user can not open them any more.
I notice that there is document subcomponent under BPS-WB, I added that subcomponent to my web layout, it still not work.Anybody know how to display the attached documents on the Web, Is this doable?

Hi Marc,
I did exactly what you mention in your responce e-mail, but it still not work coreectly.
following is my propperty configuration for layout and documents:
Planning layout (layout_lay01)
Only ready for output: True
Row/Cell Selection: Cell
Event on selection: true
Document on planning layout (Document1)
Layout: = layout_lay01
Only ready for output: false
When I launch the application through the Tcode BPS_WIF0
There is no document icon display for each data columns which can been in UPSPL. Instead there is a generic document input/display space under the lauout,however there is no any document display within the box, and I can not input anything within the document box. I changes some of the property for the layout and document, but it not work.
Did I forget some thing?

How to attach documents for Webhelp

Hello All,
I am currently using Robohelp 7 and I am facing a problem how
to attach a word document as an object in Webhelp?
I am inserting an object of type Microsoft office Word
Document, when I compile and view output help, I cannot download
the attached document.
What i need exaxctly:
Link to download a file from the generated output help, i
don't need this document to be processed by Robohelp and converted
to topics, just a word document to download from the generated
help.

Hi Sherif Esmat and welcome to our community
See if the links below help in any way. They aren't for
RoboHelp 7 specifically, but the general ideas should be the same.
Link
One
Link
Two
Cheers... Rick

BPS Web Interface don't show multiple documents for each cell

Hi gurus,
I have an issue... we are trying use text documents from BPS on the WEB interface. Everything works fine, I can input text documents on each cell on the web, and from Query as well.
I saved several other documents from the query for the very same cell, and I can see these other documents from BPS itself or from the Query by clicking on the title... but on BPS WEB interface, it shows only the last text document saved.
Is there anything wrong on the configuration, or is it possible for the WEB interface to show the titles so that the user can choose which document he wants to open?
Thanks in advance,
Chen

Hi Luke,
did you check whether the document attributes are generated for your Characteristics?
AWB -> Documents -> Administration -> Generated Properties
There is also a SAP Note 431126, which you might want to consult.
Regards,
Eric

Need to attach document for Purchase requisition usingBAPI_DOCUMENT_CREATE

Hi All,
Requirement:
Attach document(PDF,TXT etc) for purchase requisition using BSP service.
For this i am finding one function module "BAPI_DOCUMENT_CREATE" please suggest me how to use this function module or its working my requirement or not.
if it possible provide any sample code for BAPI_DOCUMENT_CREATE
So that i can move to another why.
Thanks in advance.
Regards,
Rajeshv.

Hi,
Did you check the function module documentation. It contains one example also. Please check that.
BAPI fm BAPI_DOCUMENT_CREATE is internally calling this BAPI. Please check how it is calling.
Please alos check program LWPLGF06. I think it has similar code.
Thanks,
Ramakrishna
Message was edited by: Ramakrishna Prasad Ramisetti

Attaching document in the Asset master data

Hi All,
If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this in SAP?
Also while doing asset transfer, how can we transfer the attached documents?
Please provide inputs.
Regards,
Jayasudha

Hi ,
Below is the configuration steps
Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
Â· Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
Â· Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
Procedure
Then if you check the service object in AS02 it will be in active status.
Regards,
Jayasudha

Export data for specific period through Data Pump

Hi,
I've a specific requirement to take the dumps of some tables for specific time period. like between last 10 days like 01-JAN-11 to 10-JAN-11. How can I acommplish this. For Documentation what I read is that we can export the data for specific period of thie by either setting FLASHBACK_SCN or FLASHBACK_TIME parameter in expdp command but this is point in time export not for the specific time export.
Please guide me how can export between the specific time. like between 1-JAN to 10-JAN
Regards,
Abbasi

export between the specific time. like between 1-JAN to 10-JANYou need to clarify your requirements. Data is always "at a point in time". I can see data as at noon of 01-Jan. I can see data as at noon of 10-Jan. What would I mean by data "between" 01-Jan and 10-Jan ?
Say the table has 5 rows on 01-Jan :
ID    VALUES
1      ABC
2      DEF
3      TRG
4      MXY
5     DEW2 Rows "6-GGG" and "7-FRD" were inserted on 02-Jan.
2 Rows "2" and "3" were updated from "DEF" and "TRG" to "RTU" and "GTR" on 03-Jan.
1 Row "5-DEW" was deleted on 09-Jan.
2 Rows "8-TFE" and "9-DZN" were insereted on 09-Jan.
Can you tell me what is the "data between 01-Jan and 10-Jan" ?
(the above example actually happens to have an incrementing key column "ID". Your table might not even have such an identifier column at all !)
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 10, 2011 5:23 PM

ICal - alarms for specific days (not dates)

I am very forgetful, and I often use iCal to make reminders for myself (using the alarm w/ sound). However, I often have weekly reminders at work. For example, I would back up our files at work on Tuesdays and Thursdays. I was wondering if there is a feature in iCal that can set reminders for specific days of the week. Any input is appreciated. Thanks!

Create an event on tuesday, go to the repeat menu,
select custom, mark the days you want the event to be
(tuesday and thursday). Then go to the alarm menu ans
set the sound you want.
Note: if you plan to sync to a palm device, the palm
doesn't accept events that repeat on specific
(multiple) days of the week, so create two events,
one that repeats every Tuesday and another for
Thursday.
Thank you so much! You solved my problem! -Catherine

How can I scan documents for duplicate cells?

Hello!
I've created 5 separate mailing lists in Numbers. I want to scan all five for duplicate email address. Can anyone think of a way to do this?

Hi fp,
Are the 'five mailing lists' in a single table? ...in multiple tables in a single document? ...in separate documents?
Are you looking for duplicates in each list, or duplicates that may appear in separate lists?
Here's an example, with two lists, each in a separate table.
Column C shows the number of this each address appears in the list in 'This Table' only.
C2, and filled down: =COUNTIF($B,$B2)
Column D shows the total for each address in both tables.
List 1::D2, and filled down: =COUNTIF($B,$B2)+COUNTIF(List 2 :: $B,$B2)
List 2::D2, and filled down: =COUNTIF($B,$B2)+COUNTIF(List 1 :: $B,$B2)
Tables that are in separate documents cannot be counted together as Numbers is unable to reference cells in other documents. The easiest way to handles these is to copy all the lists into a single document, code the rows to indicate which list it came from and its starting position in that list. the coding is to allow the combined list to be re-sorted into its original order to allow collecting each group's remaining members for pasting back to the original table.
Trim the list by deleting any row showing a count that is greater than one. Numbers formulas respond to any change in the table, so the count of the remaining copies (or copy) of that address will be immediately updated as each copy of the address is removed. Remember to stop when the count reaches 1.
Regards,
Barry

How to set up a formula for specific cells

I have a list of products with prices next to them. at the bottom i have a total cost of all the products but an added feature to the list, id like to "subtract" the cost of a given product from the total for the products that have already been purchased. perhaps via check box column or maybe a color fill of the cell. or if anyone has a better idea how to indicate that the product has been purchased. either way, my primary goal is to have the total at the bottom reflect only the products that have not yet been marked as purchased. thanks in advance for any help.

the first row is a header and the last row is a footer.
B11=SUMIF(C, FALSE, B)

Css for specific cells?

Someone sent me a link to a great tutorial for how to
redefine tags so behaviors like a:hover would display differently
in different cells in a table about a year ago. Unfortunately I
didn't bookmark it, and I don't remember exactly what it was
called. Does this ring a bell with anyone? I need to do it again
for another site, and I must be missing a step since it's not
working.

a { color:green; }
td.special a { color:brown; }
<td class="special"><a href="brown.html">This
link is brown, not
green.</a></td>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"judyross" <[email protected]> wrote in
message
news:etfapj$p62$[email protected]..
> Someone sent me a link to a great tutorial for how to
redefine tags so
> behaviors like a:hover would display differently in
different cells in a
> table
> about a year ago. Unfortunately I didn't bookmark it,
and I don't remember
> exactly what it was called. Does this ring a bell with
anyone? I need to
> do it
> again for another site, and I must be missing a step
since it's not
> working.
>

Error while attaching document to report on Portal - Invalid selection valu

Hello All,
We are running our reports on Portal and as per the business requirement the users have to create comments or attach documents to certain amounts in certain columns and once they create the comment a document icon shows up near that amount (for example there are 3 columns Budget, actual, balance then the user have to create comment for some amounts which needs explanation) they do that from context menu Documents -> Create new Comment.
Now we want those documents to be saved on Infoprovider level and not on master data for any particular object. We have activated the flag "Characteristic is document property" on related infoobjects. We have the flag to display document icon on Infoprovider active in the web template. Now when I run the report I am able to create new comments on first two columns and when the report refreshes it shows me icon near that amount but it gives me errors on third column after the report refreshes itself. Now when I go in portal KM repository where documents are stored I do see the document that I created for the third column as well so looks like the document is getting created and being stored but the issue is when it tries to display the icon on that third column.
The error I get is this:
The initial exception that caused the request to fail was:
Invalid selection value: AttributeMember
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException: Invalid selection value: AttributeMember
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLowForced(ProviderRange.java:297)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLow(ProviderRange.java:291)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.set(ProviderRange.java:469)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.SingleMember.set(SingleMember.java:125)
at com.sap.ip.bi.km.common.assignment.AssignmentMember.isContained(AssignmentMember.java:192)
Please give some inputs if anyone is facing same problem or is anyone has worked previously with this kinda of stuff.
Thanks in advance.
Kiran

Hi!
Have you solved this problem? I have the same problem after a SPS implementation (SPS 17). The message appears when we select a single value in a DP (hierarchical filter item) that filters another one, but when I select a node it doesn't.
Before the patch implementation the apliccation worked ok.
Any idea?
Thanks in advance.
Jose

Please help me 2 find a Document for this jar file com.sap.workflow_api

HI,
I want to create a task in UWL using web dynpro application. For this I need to import the specified com.sap.workflow_api.jar jar file.
This jar file is in our WEB AS Server
path=
server\c\usr\sap\W01\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.workflow.apps\lib
I have browsed all over for a good document , i got just one link :
http://help.sap.com/saphelp_nw70/helpdata/EN/46/94b9b2b321581ce10000000a1553f7/frameset.htm
Could you help me out with a better document for This task and I want the complete document for this particular jar file com.sap.workflow_api.jar.
It wolud be very helpful if I could get it at the earliest.
Regards,
Boopathi M

HI Ayyapparaj,
I have converted my project to javadoc,but i don't get any document for specific class. only I got what ever method is avilable in our controller that corssponding method come over in the java doc.
How can i get the document for specified IWorkflow interface ? this com.sap.workflow_api jar file has IWorkflow interface. I need to know how to use this IWorkflow interface.
How to use javadoc tool ?
Regards,
Boopathi M

Comment or attach document for specific cell of data

Similar Messages

Maybe you are looking for