Communication Channel Error : File to IDOC scenario
Hi all,
I am getting the below error in my CC monitoring for the channel, previously its good. Now its not getting process due to this error.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'DTL':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Below are the Conversion Parameters:
DTL.fieldNames : REC_CD,SYS_SOURCE_CD,ACC_DT,JE_NO,JE_SRL_NO,BUS_UNIT_CD,GEO,DEPT_ID,OPER_UNIT,PJT_ID,WRK_REQST_NO,OPEN_ITEM,PROCESS_CD,NATURAL_ACCT,FERC_ACCT,PRODUCT,AFFIL_BUS_UNIT_CD,RES_TYPE,REC_CATEGORY,DOLLAR_AMT_SIGN,DOLLAR_AMT,QTY_1,QTY,DESC,SECOND_DESC,BASE_CST_AMT_SIGN,BASE_CST_AMT,TRANS_DATE,EXH_NO,PO_NO,VENDOR_NO_7,STRS_REF_NO,STK_NO,STRM_NO,INV_TYPE,INV_NO,CUST_CD,PLAT_JE_REF_NO,VCH_NO,VCH_LINE_ITEM,AP_REF_NO,PO_LINE_NO,BILL_CTL_RPT_NO,VEH_NO,PAYT_RECVR_CODE,GLEX_SEQ_NO,PAYMT_TYPE_CODE,CHECK_NO,FILLER
fixedLength: 1,3,10,4,5,5,2,10,8,15,15,15,4,10,6,6,5,5,5,1,19,1,15,30,30,1,18,10,10,10,10,5,6,3,8,6,8,13,8,4,1,4,17,10,1,4,1,18,13
keyFieldValue: D
Please help me in this..
Regards,
Srikanth.
>
srikanth vadlamani wrote:
> Hi experts,
> Communication Channel itself shows this error, still I did not placed the file in the FTP to process.
> The error is not from RWB/MONI, it is from Communication channel monitoring, there I can see the red flag. If I am can process the file then its ok I can check with the data or my business people, but channel itself shows this error, need to fix, tomorrow they might place the file, it should process.Pls. help me how can I resolve this issue.
>
> regards,
> Sri..
In this case check SAP Note 830238.
Similar Messages
-
How to configure receiver communication channel in File to mail scenario?
Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri -
Message has error status at outbound side File To Idoc Scenario
hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek -
Error in File to IDOC Scenario
Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
VikasHello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna -
Error in File-PI-Idoc scenario
Dear All,
While working on File-PI-Idoc scenario, I am getting the error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">UNAUTHORIZED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked various other posts on the same error but still I am not able to resolve this.
Please help me in resolving this error.
reg,
njNishu,
Please check whether you have assigned the following roles to the particular user you are using for data communication.
Roles:
SAP_XI_IS_SERV_USER,
SAP_XI_APPL_SERV_USER
Regards,
Sugata -
JDBC to JDBC Scenario - Communications Channel Error
I am following the published JDBC to JDBC Scenario:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
The data source is in
C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
Why am I getting the error?
Thanks,
Ed CulnaneHi
Connection Parameters are of given below check
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Well ms access file should be in the XI Server path or it should be able to accessed by the XI
Try this above option of keeping u r file in the XI Server path instead of the local
rgd
srini -
Getting end-of-file on communication channel error on this query
Hi guys,
I'm getting the end-of-file on communcation channel error when running the following query in SQL PLUS, If run it in a stored procedure called through code of JDBC, it gave "no more data to read from socket" error. Any idea what went wrong? kind of frustrated now. We are using the Oralce 9.0.1.4.0, which suppose to fix some sdo_uion and sdo_buffer bugs. Thanks a lot!!
select SDO_GEOM.SDO_BUFFER((SELECT SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(GEOLOC, 0.011119487)) FROM GEOTEL_SOURCE where MSA='5000' and COMPANY_NAME ='AMERICAN FIBER SYSTEMS'),1.0,5,'unit=MILE arc_tolerance=0.05') from GEOTEL_SOURCE a where a.MI_PRINX = 1;Hi Daniel,
Just tried the 9.2.0.2 patch, seems to work better now. At least I don't get the end-of-file on communication channel error. But how about the speed thing? I isolated the problem, and find out that sdo_aggr_union is taking too long to finish( 1 Hour!!! for 2300 lines with the same city. Any clue to optimize it, I tried some hint like /*+ordered*/ No_Merge and something like that, does not improve though. Thanks! -
Regarding error in XI File to IDoc scenario
Hi,
when i was doing file 2 idoc scenario i got this error "Unable to convert sender service to an ALE logical system". please resolve my issue as early as possible.Uday,
Please go through these threads:
Unable to convert the sender service to an ALE logical system
How to convert Sender Party/Service to a Logical System?
Unable to convert the sender service to an ALE logical system
BR,
Alok
Edited by: Alok Sharma on Jan 31, 2008 12:39 PM -
Idocs with errors added status-56 in file to idoc scenario- how to rectify
hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San -
IDOC is posting with Errors in File to IDOC scenario
Hi,
I did the File to IDOC scenario for CREMAS . IDOC is posting with Errors .. i.e. in the status record it was showing 56- EDI: Partner profile inbound not available ..
If I manually process that IDOC in WE19 , then it was processing successfully.. and in the we19 it was showing Inbound Processing : Port Not Maintained but even though manually it was posting fine...
any ideas regarding this will be appriciated.....
Regards
BabuPlease check whether you had done the following assuming your doing File to Idoc
Settings in your Business service for the receiving system
Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
Settings in R/3
WE20 - Add the partner profile for the particular message type cremas and process code.
Your statement
" and that same logical system name had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
Please do mention R/3 Details in the receiver business service or system.
Thnz -
File to IDOC scenario error...
Hi all,
we hhave created an File to Idoc scenario .
we are getting the following error in SXMB_MONI t-code.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BUS_SENDER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service BUS_SENDER to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can any one plz say wat this error might be..
TIA
Regards,
RajHi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful -
How to catch Posting error in File to IDoc Scenario?
I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj KumarHi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh -
Dear XI experts ,
Issue : Error to a new implementated SAP ERP SYSTEM . File to IDOC Scenario
Business Scenario : Exchange Rates from Thomas REuters (XML) - > XI-> SAP 1 , SAP 2 ERP Systems ( 2 diff SAP ERP systems)
SAP 2 is a new system set up for a new plant of our Organization.
The Excahnge rate is gettiong updated by IDOC: EXCHANGERATE.EXCHANGE_RATE01 in two SAP Systems
Each one is configured with diffrent IDOC receiver .
The Error is : for the SAP 2 system . The MEssage gets branched and one message is successfully sent to SAP1 , and turns an error : in SXMB_MONI for SAP2 system
I had been thropugh few blogs have performed the below steps:
-IDOC metadata : IDX2 have configured in XI
-checked the port of EGP , Partner Profile in SAP 2 ERP system
-Checked IDX1 , IDX2 of SAPEGP in XI .
-Refreshed business system .
-Tried to send the xml data from the start point through File Zilla(FTP)
Could somehow help as this is Production issue ans this is affecting the business.
Error from SXMB_MONI:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_PARTY</SAP:Code>
<SAP:P1>http://sap.com/xi/XI</SAP:P1>
<SAP:P2>XIParty</SAP:P2>
<SAP:P3>Reuters</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender XI party http://sap.com/xi/XI / XIParty / Reuters to an IDoc partner</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Reuters : is the Sender Party of Exchange Rates. I have seen in blogs to craete agency / schema , but since thsi scenario is 2 seperate SAP ERP systems , my question is do i need to create agency , schema for sender party .
Appreciate your Input
Thank you,
Vara
Edited by: Varalakshmi SB on Oct 26, 2011 12:14 PM
Edited by: Varalakshmi SB on Oct 26, 2011 12:16 PMagency and scheme are used when your doing B2B scenarios.
-
Hi All,
I am doing File to IDoc scenario( Bypass) for Orders05.
File is picking succesfully and not posting the idoc in the SAP..
My source file(idoc-xml) consists of all the required data to post the idoc including the segment 'E1EDK01'.
but the error it is showing is <b>" Obligatory node 'E1EDK01' missing in the structure ORDERS05 "</b>
Please suggest me ASAP what is going wrong .
Thanks in Advance.
Regards
Seema.The source File is not the idoc XML. It is invalid. You might need to ask the source to change the XML or use a Mapping to do this.
This is how it should look, ( check the parts in bold),
<?xml version="1.0"?>
<ORDERS05>
<IDOC <b>BEGIN ="1"</b>>
<EDI_DC40 SEGMENT="EDI_DC40">
<DOCNUM>1</DOCNUM>
<DIRECT>2</DIRECT>
<IDOCTYP>ORDERS05</IDOCTYP>
<CIMTYP></CIMTYP>
<MESTYP>ORDERS</MESTYP>
<SNDPOR>XXXXXXXXX</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPFC></SNDPFC>
<SNDPRN>XXXXXXXX</SNDPRN>
<RCVPOR>XXXXXX</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPFC></RCVPFC>
<RCVPRN>XXXXXXXX</RCVPRN>
<CREDAT>20070511</CREDAT>
<CRETIM>152803</CRETIM>
</EDI_DC40>
<E1EDK01 <b>SEGMENT = "1"</b>><BELNR>AAAAAAAAA123</BELNR>
</E1EDK01<b>SEGMENT = "1"</b>>
<E1EDKA1 ><PARVW>EK</PARVW> <ILNNR>231654845121</ILNNR>
</E1EDKA1>
<E1EDKA1 <b>SEGMENT = "1"</b>><PARVW>LF</PARVW>
<NAME1>international</NAME1>
<NAME2>Delhi</NAME2>
<ILNNR>2121211545</ILNNR>
</E1EDKA1><E1EDK02 <b>SEGMENT = "1"</b>><QUALF>001</QUALF>
<BELNR>AAAAAAAAA123</BELNR>
</E1EDK02><E1EDK02 <b>SEGMENT = "1"</b>><QUALF>002</QUALF>
<BELNR>AAAAAAAAA123</BELNR>
</E1EDK02><E1EDP01><POSEX>45</POSEX>
<E1EDP19 <b>SEGMENT = "1"</b>><QUALF>001</QUALF>
<IDTNR>00000000002150059</IDTNR>
<KTEXT>Reddy</KTEXT>
</E1EDP19><E1EDP19>
<QUALF>003</QUALF>
<IDTNR>5484218521214</IDTNR>
</E1EDP19></E1EDP01>
</IDOC></ORDERS05>
Regards
Bhavesh
PS : You need to add SEGMENT = "1" for every segment. Please do add it if I have missed in the XML above. -
ORA-03113: end-of-file on communication channel ERROR
After applying Database patch 3095277 to my 9.2.0.1.0 installation
in order to update it to 9.2.0.4.0,I'm getting ORA-03113: end-of-file on communication channel
ERRORS when attempting various tasks. This is a local installation running on a Windows XP Workstation.
I've even tried creating a new test database but the result is the same.
The reason for moving up to 9.2.0.4.0 is so I can start using Advanced Queuing, which I understand had problems in earlier releases.
However before the update I could at least create the JMS queue tables without ERROR whereas now I get the following errors when attempting to create a queue table in SQL Plus from within Enterprise Manager Console.
SQL*Plus: Release 9.2.0.4.0 - Production on Thu Sep 18 08:20:08 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table=> 'JMSQTBL',Queue_payload_type=>'SYS.AQ$_JMS_STREAM_MESSAGE',multiple_consumers=> false); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE(Queue_name=> 'JMSQUE',queue_table=> 'JMSQTBL'); END;
ERROR at line 1:
ORA-03114: not connected to ORACLE
I would be grateful of any pointers as to how to resolve this problem.
Regards
Gary.Chris, Thanks for the suggestion,
I took a look in the trace log and found the following entries that point to a ORA-00600 as you mentioned earlier.
This is only a test database so there's no great loss if
I have to re create it, but in saying that I did create a new test02 from scratch and had the same problem.
Is it posible something went wrong when applying the 9.2.0.4.0 patch ?.
Regards
Gary.
Dump file c:\oracle\admin\test01\udump\test01_ora_2556.trc
Wed Sep 17 16:25:14 2003
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Instance name: test01
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 2556, image: ORACLE.EXE
*** 2003-09-17 16:25:14.046
*** SESSION ID:(7.17) 2003-09-17 16:25:14.031
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** 2003-09-17 16:25:14.281
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
Current SQL statement for this session:
select 1
from resource_view
where any_path = '/xdbconfig.xml'
----- PL/SQL Call Stack -----
object line object
handle number name
6A4FA348 6 package body XDB.DBMS_REGXDB
6A504D88 1 anonymous block
6A576AB8 639 package body SYS.DBMS_REGISTRY
6A1DBB6C 1 anonymous block
Maybe you are looking for
-
Hello everyone, Can you add a task to a template on the closing cockpit once it has been released? If so, how do you it? Thanks .
-
IBAN Maintenance in Vendor Master
I would like to have a solution to validate bank account number and IBAN while maintaining both these fields in vendor master record. Business scenario is that we should be able to enter bank account number with or without IBAN. But if both bank acco
-
I have installed the adf-faces EA13 in JDeveloper 10.1.3 preview and have problems using it. When I create a page with the servlet2.3/jsp1.2 option the adf-faces libraries do not show up. They show up when I use the servlet2.4/jsp2.0 option but I get
-
HT1430 ITunes will not open on my Iphone 5 .
Since downloading IOS 7 I Tunes will not open.
-
My iPhone 4 keeps losing my notes? I learned thru this forum they get moved into a folder in my email account. Why is this happening? It is not where I want them. Is there a limit to how many notes you have? I only had about 10 different 1-page