Communication process for customs export declarations in ATLAS

Hi,
I am looking for notes which is relate to German export declaration process.
The notes related to 2 message types, one for sending the inspection relate data to the responsible customs office (Neue Nachrichtenart "Beschau") , another message type for sending exit confirmation to customs office when truck leave EU after 70 days (Neue Nachrichtenart beim Follow-up nach 70 Tagen).
Appreciate your help.
Regards,
Lluvia

Hi Ping, or Lluvia,
You can search for SAP Notes in the SAP Service Marketplace.
Regards,
Dave

Similar Messages

  • Customs export declaration not getting created

    Hello everyone .. i need help of your expertise
    I am creating billing document on R/3 and we have made it such that the F2 document flows onto GTS and creates a Customs export declaration
    The issue here is i have created the billing docs but i cannot find them on GTS.
    I checked the value of the goods is not equal to zero
    Checked the SM58 to see of any RFC log is there at the time of document creation and time .
    checked SLg1 on GTS to see if any log , but no log is there .
    It is basically an export order from EU country to a non EU country
    and i checked the billing doc and it is export relevant
    The document is flagged to go into GTS in document control settings on R/3
    Plant , company code and everything is mapped.
    It is an intercompany customer transaction.
    When i try to pull up the CULOEX by using the reference doc # from feeder system its saying no documents found
    in test environment the billing doc is flowing onto GTS and creating CULOEX succesfully.
    The sales order and delivery docs basically passed the compliance test and they are good.
    Can someone suggest me where else i need to go and look at .
    your help is very much appreciated.
    thanks
    Bharad

    Hi Bharad,
    Could you let us know the current status of the issue? If it is resolved could you pls share us how you have done it as it is the most occurring issue and leaves no clue too? If not resolved, Could you check whether the Badi /SAPSLL/IF_EX_CTRL_SD0C_R3 is activated in R/3 or not?
    Regards,
    Shiva

  • AFE process for Customer and Investment Project

    Hi All,
    My client want to have AFE process for Customer as well as Investment Project Creation.
    Once, AFE is approved a project should be created along with project plan valueswith approved values in AFE request. Also, in case any supplement need to project also should have a similar AFE approval process. For this client, there is No IM module implemented as such.
    Want to know how we can map this scenario in SAP.
    Thanks in advance.
    Regards,
    Atul R. Rajmane

    IYou can make use of simulations...create simulation version before creating operative project...you may create more than one simulation for various cost plan scenarios..you can plan revenue in simulation also for customer project...whoever gives approval for project expenditure.... they may compare the cost of the simualtion version and approval can be transfer of simulation version to operative version....Also, you can use this for supplements...create simualtion during course of project...then add actvitiy, material..etc., do the cost analysis...and provide the supplement budget accordingly to the new planned cost.

  • Custom Export Declaration Form in GTS

    Hi,
    Good day!
    I would to ask for your assistance with regard to the Print Program of standard Smartforms in GTS. 
    Currently, I need to replace the standard Export Declaration Form with a custom form.  I found in SPRO that the current standard form is  /SAPSLL/SF_CH_802AZV.  However, I can't find the the Print Program for this form. 
    Can anyone help me with this? Anyone knows how to find the standard Print Program for the standard Export Declaration Form --- /SAPSLL/SF_CH_802AZV --- in GTS? 
    Thank you very much!
    Best regards.
    Brando

    Hi, Its not really clear what caused the error...
    Did you get an inbound message (I***)  with the error message ( Authorized value 9 ) after sending the M class message ?
    Or was it GTS internal error ? My tip is that you used some value for a field which is not valid in the current code list - maybe check if code lists haven`t changed....
    Anyway, to reprocess message there is a small button on the Communications tab (Declaration header level).

  • ABAP Run time error when display the Customs Export declarations

    Hi,
    I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
    Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
    While debugging we found that Primary Key of the below structures are not the same
    lt_corpar                              type      /sapsll/corpar_t
    lt_corpar_ht       type      /sapsll/corpar_k02_ht
    Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
    Error message short details
    Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
         "/SAPSLL/CUHD_LOAD_SELECTION".
        The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
        In the source code you have the termination point in line 144
        of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
    We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
    Regards,
    Pradeep Maddi

    Hi,
    I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
    For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
    Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
    Proforma Invoice not transferred to GTS
    After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
    Error details
    Runtime Errors         ITAB_DUPLICATE_KEY
    ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
    Application Component  SLL-LEG
    You tried to insert an entry into table  "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
    Regards,
    Pradeep

  • SAPKCCD46C Command file for customer export

    Hi,
    We installed a new system 46C on Win2000/Oracle.
    then created a client.
    Then we import all customer develement classes in our PROD system to new system. Aim is to construct new system using client export import from our production system. during client import there some tables that are not in nametab. when we looked for these objects in a request we came to SAPKCCD46C. This exists in production client but does not exist in new system. I can see that this should be a component addon or a support package. but all addon and support package levels are same on production and new system. Does any one have any clue what this package is?

    Hi Bhaskar,
    I don't say we can't run/execute multiple operations.because BAM Icommand supports Multiple Parameter Targets.please read document and get finalized.
    http://docs.oracle.com/cd/E17904_01/integration.1111/e10224/bam_icommand.htm#SOASE1038-- in this doc see this section "How to Specify Multiple Parameter Targets"
    To more about I command http://docs.oracle.com/cd/E17904_01/integration.1111/e10224/bam_app_icommand.htm#SOASE2336.
    my suggestion is create a bat file or any script file based on your OS inside script file you can configure multiple parameters.
    In BAM Icommand we export/import folders too if its DataObjects or reportrs or alerts too.
    Regards
    Siva Sankar

  • Rework process for Customer returns in process Industry.

    Hi Gurus,
    We are working in a process Industry. The process is here we do
    Sales order
    MRP run
    Process order
    Process order confirmation
    delivery
    billing.
    Now the scenario is, once delivery done, customer returns the goods for rework.
    To complete this process, how can i go ahead and whether this will reflect in the PP module or not & how can we interrelate the SD with PP in this regard.
         Note: we dont have the CS module now
    Thanks.
    Thyagarajan.
    Message was edited by:
            thyagarajan krishnamurthy

    Hi amith,
    for return process you have to follow RE document type and LR for pgr
    while coming to excise you should have to do J1IEX without purchase order the the values of excise will be reversed .
    it should resolve your issue
    bvdv

  • Allow pdfmark processing for PDF export

    The title says it all. Right now we could insert pdfmarks backhandedly through placed EPS files (amongst others). But that does mean to go the Distiller way to process them.
    Maybe a souped-up PDF export filter can handle that; eg. by checking a new feature called "Enable pdfmark processing" in an "Expert" section.
    And if you wonder what a pdfmark is, read the following:
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/pdfmark_Syntax.63.2.html
    Or download the SDK for Acrobat:
    http://www.adobe.com/devnet/acrobat/documentation.html
    I think there are numerous applications for this feature…
    One tiny one would be to process a PDF so that it will open in Acrobat showing the thumbnails right from the start.
    EPS code for that is:
    %!PS-Adobe-3.0 EPSF-3.0
    %%BoundingBox: 0 0 144 144
    %%EndProlog
    /pdfmark where {pop} {userdict /pdfmark /cleartomark load put} ifelse
    [ {Catalog} << /PageMode /UseThumbs >> /PUT pdfmark
    %%EOF
    Uwe

    Hello Dov,
    Here is my bit of postscript.
    << /Subtype /Text /Open true /Type /Annot /Popup 15 0 R /C [ 1 1 0.2500000 ]
    /Rect [ 134.646 731.906 138.387 735.024 ] /Contents (Goodbye) >>
    Creates an annotation 'Goodbye'.
    P.

  • Rebate Processing for Customer group

    Hello Gurus,
    I need to define a material rebate group agreement for a particular customer group ( abt 6000 Customers). How do i do it?
    While creating a rebate agreement we have to mention the payer. In my case the payer is different for each customer.
    Please let me know.
    Warm Regards
    Prashant Joshi.

    Hi Prashant,
    ...During rebate settlement credit note, the system automatically defaults the payer from the rebate agreement.
    Same is the case with customer hierarchy rebates.
    Yes, this is default functionality when using standard rebates agreements.
    That makes sense when all the rebate due is paid to a single customer (might be a purchasing central or a specific pay-to party).
    In my case the payer is different for each customer.
    OK, what you want to do is to send a different credit note to each customer.
    You have 2 solutions:
    - Define a different rebate agreement per payer (standard rebate agreements)
    - Use only one extended rebate agreement to get the functionality you need.
    Extended rebate agreements are special because they allow you to customize how the credit note is "splitted" between different partners and to which partner it is paid.
    The benefit of an extended rebate agreement is that only one rebate agreement is maintained. Also scales take in account the whole sales volume!

  • Trading Community API for Customer

    Hello All,
    Is it possible to convert a customer account of type ORGANIZATION to a customer of type PERSON using TCA API.
    I have been serching for an answer for a long time now. Any help would be really great.
    Thanks
    Dhanunjaya

    Any luck???

  • Forms not active in Communication tab in Customs Declaration

    Hi,
    The forms (Shippers Letter of Instructions, SED, COO etc) are not active and not showing up in "Communication" tab of Customs Declaration while creating a customs declaration manually from transaction /SAPSLL/CL_CUS_01.
    Appreciate any help in pointing to missing configuration or activation of BAdI etc. 
    Followed the steps in "Communication Processes" in Customs Management in IMG
    1. Action Profile:          US_CU_EX      (US: Customs Processing (Export)
    No changes made
    2. Action Definition:
    Action Definition     Description     Sort Order
    US_CU_EX_CUSEX_M_UAES2     Export Declaration Option 2 (US)     0
    US_CU_EX_CUSEX_P_COO     Certificate of Origin (US)     
    US_CU_EX_CUSEX_P_SED     Shipper's Export Declaration (US)     0
    US_CU_EX_CUSEX_P_SLI     Shipper's Letter of Instructions (US)     
    No changes made
    3. Messages for Communication Process:
    Message     Description     Message Type     Scheme
    P0350     Certificate of Origin (US)     /SAPSLL/CUS_EXP     CUS_US
    P0360     Shipper's Export Declaration (US)     /SAPSLL/CUS_EXP     CUS_US
    P0370     Shipper's Letter of Instructions (US)     /SAPSLL/CUS_EXP     CUS_US
    Assigned Scheme
    4. Control Settings for Communication Process:
    Process – CUSEX     
    CUSEX     Export     Export/Dispatch     Export / Reexport
    Activities:
    CUSEX     Export Declaration          SED
    Messages:
    M0410     Export Declaration Option 2 (US)
    P0130     NAFTA Certificate of Origin (NAFTA)
    P0140     Export Packing List NAFTA (NAFTA)
    P0350     Certificate of Origin (US)
    P0360     Shipper's Export Declaration (US)
    P0370     Shipper's Letter of Instructions (US)
    5.Print Control for Foreign Trade Documents:
    Assigned Message to Legal Unit
    6. Print Profile:
    Defined Print Profile (where to assign this?)
    Thanks
    Sreekar

    Hi Venkat,
    Sorry for delay in reply and thanks for helping me out on this issue. We have worked out the ADS configuration issues, set up master data for printer, set up .xdc files for printer etc. and are now able to display the forms and able to 'print preview' the forms.
    However, when I print preview the form, the print icon is grayed out. I am not able to print the form. Can you please advise what am I missing?
    Thanks
    Sreekar

  • Approval process workflow for Customer XBO

    Hi experts,
    We have a client requirement which asks for multilevel approval process for Accounts (when a new Account is created/ existing Account is changed). As per my knowledge, there is no standard approval process defined for Customer XBO as of now by SAP.
    Also, if the Account creation/modification is 'Rejected' by any manager, then how will the Account be reverted back to its original version? (kind of a rollback)
    I had raised an incident for this asking the SAP team whether they will be adding any approval processes for Customer BO in the near future C4C releases. But they do not have any plans of implementing it sooner.
    They suggested a workaround as follows:
    Add 1 extension field "approval status code" in Account with code values:
    1 - To be approved by L1 manager
    2 - Approved by L1
    3 - Approved by L2......etc for more levels of approval
    Reverting 'Rejected' Account to previous state is not possible via PDI. In principle you would have to read the changehistory data and revert to the state before the change was done. But the changehistory BO is/will not be PSM released.
    Any workaround or suggestions on how can I go about implementing this requirement? I need to put validations like L2 can approve only after L1 approval.
    Please guide and help.
    Thanks,
    Ambuja Prabhudessai
    Persistent Systems Ltd.

    Hi,
    why don't you create a screen from which user will create or modify the accounts. after submitting the custom screen , you should start the approval process, once all the approval is done, create or modify the account in SAP.
    Regards.
    Sanchari

  • SAP Cloud for Customer SCN space now available

    If you haven't already checked it out, we now have a dedicated space just for SAP Cloud for Customer:
    http://scn.sap.com/community/cloud-for-customer
    Come join the conversation and engage with product management, solution management, knowledge management, and development from the SAP Cloud for Customer organization.
    Cheers,
    John

    Thanks Sathya for the response.
    https://scn.sap.com/community/cloud/blog/2013/10/10/new-e-learning-for-i
    ntegration-of-sap-cloud-for-customer-with-sap-erp-and-sa
    p-crm-now-available  : Not working! => Please check & confirm.
    Just to give you our background...we are SAP Cloud Partners & VARs, hence we are building few prototypes for Customer Demos & POC.
    Per my understanding, its just one of the OnPrem system, either an ECC OnPrem or CRM OnPrem that you can integrate with one C4C tenant at a time, i.e. to one single tenant. In our case, we are trying to integrate ECC OnPrem with C4C system.
    We are in the process of deploying SAP PI as the middleware platform for integration between C4C & ECC/CRM OnPrem., which is going to take few more weeks.
    SAP HCI will be the other approach, but we are currently not familiar with that, hence we have a trial to start in coming week for SAP HCI, so this is going to take some time as well.
    Hence, WebService is the only currently available option for us to build these prototypes, POC for Customer Demos, to show working integration scenarios between ECC OnPrem & C4C system.
    We have been facing some technical issues after setting up necessary communication systems/arrangements on C4C system & trying to do a WS call from SDK also we get error when we do a ping test from within C4C system to check connection.
    Has SAP developed any WS integration between C4C & either of the ECC or CRM OnPrem system? Or is it just PI & HCI which SAP has for integration?
    I'd truly appreciate if you can guide us on creating few integration scenarios (Working ones of course ) using Webservice between C4C & ECC OnPrem system.
    Many Thanks
    Ankur

  • Table for Texts for Customs Documents - Relation to /SAPSLL/CUHD or ..CUIT

    Hi Folks!
    I am looking for the table where the text for customs declaration is stored in.
    E.g. when you write a remark or other text within a customs export declaration (on the text-tab) - in which database table is this text stored and how is the relation to /SAPSLL/CUHD or on item leve to /SAPSLL/CUIT?
    any help would be much appreciated.
    Regards,
    Ralf

    Hi Ralf,
    i have just used simple traced transaction and it leads to STXH and STXL tables.
    TDOBJECT: SLL_CUHD_C
    I believe function module reads/translated the texts.
    But this is probably only a beginning of investigation.
    Cheers,
    Gabriel.

  • Cloud for Customer - Security training

    Please share the courses which can be attended to get an understanding of Security concepts of SAP Cloud for Customer. Thanks

    Seems like this is in the works based on Angela's comment at the link:
    http://scn.sap.com/community/cloud-for-customer/blog/2014/09/17/lets-get-the-c4c-education-party-going
      Angela Browne wrote:
    Hi Thierry,
    The certification framework is also in the works. Stay tuned.
    Cheers,
    Angela
    Please stay tuned. Thank you.

Maybe you are looking for