Communication via TCPIP with an oscilloscope

I try to communicate via TCPIP with a digital oscilloscope (Tektronix TDS3000B series). First of all; Is that possible or do I need a GPIB interface? Where can I find an exact description of the commands? So far I could build a connection, but nothing happens on commands like "clearmenu", ... Is the protocol I am using anyway GPIB? I found a labview file tktds3k.vi - could I use or modify this file.
I'm happy about any kind of suggestions-there must be someone communicating with an oscilloscope!? thanks, Felix

Are you sure that your scope supports VXI-11 for TCP instrument communication? Given IP 192.168.0.1, this VISA resource descriptor will access a VXI-11 instrument (VXI-11 specifies the ports for communication in its specification, so you don't need this in the descriptor) "TCPIP::192.168.0.1::INSTR".
If your instrument does not support VXI-11 and you want access it via VISA using straight TCP to a specific port number (port 5555 in this example), use the descriptor "TCPIP::192.168.0.1::5555:OCKET". Also, make sure you are running a newer version of VISA since VXI-11/ Raw Socket support hasn't been around as long as VISA has. If it's referenced in the helpfile (for viOpen) then it should support these resource descriptor formats.
Hope this helps.
Scott B.
GPIB Software
National InstrumentsMessage Edited by ScottieB on 04-11-2005 09:55 AM

Similar Messages

A communication error occured, with the TREX TcpIp Server (Errorcode 2982)

Hi All,
 We are in the process of Migrating our EP 5.0 --> EP 6.0. While upgrading TREX, I am getting following error:
"Error occurred during search: com.sapportals.wcm.WcmException: A communication error occured, with the TREX TcpIp Server (Errorcode 2982)
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)"
 Has any one came across this type of error ?
Software version details:
EP 5.0 SP6 Patch 1 Hotfix 8
CM SP 6 Patch 1 Hotfix 21
Trex (Earlier 6.0.0.0)---> TREX 6.0 SP 1 Patch 6 (6.0.1.6.0)
Regards
Sunil Kulkarni

Hello James,
 Thanks for writing.
I am on Windows.
 Now the problem is solved. I had also created a message with service market place for the above mentioned problem.
Solution: While upgrading the TREX, it has overwritten the "TREXIndexServer.ini", we restored it from the backup & the error was resolved.
Thanks & Regards
Sunil Kulkarni

Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

Welcome to the Apple Community.
Peer-to-peer AirPlay
With peer-to-peer AirPlay, your iOS device and Apple TV don't need to be on the same Wi-Fi network. If you have one of these products, you can use peer-to-peer AirPlay:
* iPhone 5 or later, iPad (3rd generation or later), iPad mini, or iPod touch (5th generation) using iOS 8 or later.
* Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later. Find out which Apple TV model you have.
To use peer-to-peer AirPlay, your iOS device needs to have both Wi-Fi and Bluetooth turned on.

Http client------ XI (via HTTP with SSL),

hi forum,
we have a http client that sends a http erquest to XI, by using sap/xi/adapter_plain
service, i mean plain http adapter
but for scurity reasons i need HTTPS communication,
can u tell me how to enable HTTPS (HTTP with SSL) communiaction in the same scenario,
http client------>XI (via HTTP with SSL)

hi sudeep,
u need to create a comm ch of adapter type http n set the security level there.
refer this for help:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
[reward if helpful]
regards,
latika.

Can Wireless Home Audio products be controlled via IP with any other devices?

I'm interested in knowing if the Wireless Home Audio Director, Conductor or Player can be controlled via IP with alternative controllers? Specifically, I'm interested in integrating the products into a universal remote control or home control system and still have 2 way communications with feedback. IP and RS232 are the most commons ways of accomplishing this.

Hi,
Maybe for basic functions like (play, stop, next) using the IR remote, a third party IR based universal remote may work but that's a big gamble to take, anyway what would be the purpose then of the Linksys DMRW1000 (IP based remote control) remote that Linksys is selling if its compatible with third party remotes.
Wireless Home Audio remote
Well that's my thoughts on this, I hope you'll find the device your looking for.

Communication of XMII with XI

Hi,
I would require your help for communication of XI with XMII
I am getting PO data from R/3 which is required to be sent to xMII via XI.
According to help this can be achieved via HTTP Receiver adapter
Can anyone help me if XI can post request to query string

Hi Sheetal:
One way to do it is call an xMII Business Logic Transaction from XI which passes on the information to xMII
some examples:
http://<<servername>/Lighthammer/Runner?Transaction=CalcTest&A=123&B=234&OutputParameter=Result
http://<<servername:port>>/Lighthammer/Runner.aspx?Transaction=S95/ScheduleDownload&InputParameter=ScheduleMessage&XacuteLoginName=abc&XacuteLoginPassword=xyz&OutputParameter=ResponseMessage
If you have any questions feel free to contact me at
[email protected]
Hope this helps.
Bimal
ASM - Manufacturing

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

X.400 communication via saprouter

Dear Guru's,
I have searched on sapnet and the internet for X.400 communication via the saprouter, however I cannot find specific information about this.
Our XI/PI establishes X.400 communication, which should be routed via the saprouter through the DMZ. I'm wondering if saprouter can perform this......
Does anyone worked with this before?
Kind regards,
Mark

Hello,
SAP router does support TCP/IP, telnet and LPD apart from its native SAP Protocol.
Please find the below link detailing functions and characteristics of SAP Router:
http://help.sap.com/saphelp_nw04/helpdata/en/96/c120f8860d11d2ac790000e83539c3/frameset.htm
The usual way to connect a system to external systems is to put the saprouter alongwith a firewall and put an external server in the DMZ which communicates with SAP via SAP Router using SAP Protocol.
Typically you can find some configs in ITS and Portals.
Please check the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dffcbb-9416-2a10-a795-ae2302583d45
Regards,
Siddhesh

Connect E90 via BT with AUDI

hello, could anybody connect his E90 via Bluetooth, with his handsfree system at his Audi car ?

Yes, I connected yet.
But:
- sometime I lose BT communication between car and phone
I have last FW for phone and A6 too.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

Can't send e-mails via Mail with a Gmail e-mail address using Sky internet

Can anyone help? My brother has an iBook G4 Mac OS X 4.1 and is trying to send e-mails via Mail with a Googlemail e-mail account. He is using Sky for his broadband. I assume it has something to do with his outgoing smtp e-mail Preferences in Mail, but for the life of me I can't figure it out. He can receive e-mails OK, its just that when he tries to send he gets the 'server can't send error'. Any ideas?

Here's my gMail IMAP SMTP settings...
smtp.gmail.com
Port 25
Authentication: Password
SSL
Sky may require another port to pass through...
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

UNSUPPORTED : The way it works Apache with OC4J via AJPV13 with mod_jk

RDBMS Version: 8.1.7.x
Operating System and Version: SUSE Linux 7.2 / Win NT/2k/XP
Product (i.e., OAS, IAS, etc): 9ias 1.0.2.2 OC4J 9.0.2.0.0
Product Version:
JDK Version: 1.3.1
Error number:
UNSUPPORTED : The way it works Apache with OC4J via AJPV13 with mod_jk
We dont want to use the lame and old mod_jserv so we want to use oc4j but in connection with Apache.
This is like mod_oc4j in the Oracle 9ias Release 2
This guide is for advanced users !
Step-by-Step :
1) get Tomcat 3.3 for linux or nt with Apache module mod_jk
http://jakarta.apache.org/builds/jakarta-tomcat/release/v3.3/bin/
2) add mod_jk module to httpd.conf (9ias) and comment all mod_jserv, dms, oproc, ojsp ....
LoadModule jk_module libexec/mod_jk.so
Include mod_jk.conf
3) edit mod_jk.conf
JkMount /*.jsp ajp13
JkMount /servlet/* ajp13 JkMount /servlets/* ajp13
<Location "/WEB-INF/"> AllowOverride None
deny from all
</Location>
3) edit workers.properties
workers.tomcat_home=/opt/oracle/ias/oc4j/j2ee/home
workers.java_home=/usr/java
worker.list=ajp13
worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13
4) edit http-web-site.xml (oc4j)
<web-site host="localhost" port="8009" protocol="ajp13" display-name="Oracle9iAS Containers for J2EE HTTP Web Site">
5) start oc4j
java -verbose -jar oc4j.jar
6) start apache (look in error_log)
apachectl startssl
7) try to request a jsp page or servlet ..
http://localhost:7777/test.jsp
8) good luck it works fine .. !!
Matthias Roth
Technical Manager
Z|rich Investmentgesellschaft mbH
[email protected]

Thanks for the tip Mathias, it's always good to see people trying out experimental things with the products.
We're providing a new module (mod_oc4j) with our Oracle9iAS Release2 product to do this directly from the Oracle HTTP Server (Apache). We've re-written bits and pieces of the module to improve it's performance. Likewise, we've also integrated mod_oc4j with our HA story so it will be notified when new OC4J instances are brought online or if existing ones go down, enabling it to actively route requests around the available OC4J instances.
Thanks again!
-steve0

I can't connect my iphone 4 via bluetooth with my car phone

I cant connect my iphone via bluetooth with my car phone. Bluetooth is switched on on the iphone and the car phone says ready for bluetooth telephony yet the phone just keeps on searching without connecting? Any ideas as Apple phone support doesn't start until 9am (not very accommodating for a company whose equipment runs 24/7)

Car phone?
You are trying to connect your iphone to another phone?

How to forward sms messages via email with date and contact received info

Does anyone know how to forward sms messages via email with date and contact received info.
Currently when I forward only the body copy of the sms message is sent in the email.

This is not currently possible. Sorry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Opening a search service via Mail with Chrome and not Safari

Hello all,
Is there an option to open a search service via Mail with my default browser (Chrome) instead of Safari. This works while searching from the browser itself but not the Mail app, have not experimented with other os x apps.

Then check the Mail preferences for a default broswer entry and change that to Chrome. Not sure if it is in there as I stopped using Mail several years ago.
To completely get rid of this problem stop using Mac Mail.app and switch to some other mail program that actually works correctly.

Communication via TCPIP with an oscilloscope

Similar Messages

Maybe you are looking for