Communicator configuration for sign in name and do...

If I go to my companies CWA URL, I get the web access screen. It prompts me for a Sign-In Name (my email address in this case) and a Domain\user (my Windows/Active Directory) account. If I do not enter both, it fails to login. How do I do this on my N8? There is only one username box, which is the Domain\user value, but none for the other value. When I try to sign in, I get an error complaining about network issues and error code -36. The network is fine, as I get incorrect username when I enter the wrong details, but I get nowhere with these current config.
Cheers
Marc

To further extend this, I get an error "Sign in cannot be completed due to network issues." Error -36.

Similar Messages

It is asking for a router name and password???

The sales person told me how easy this would be to set up..."just plug it in" he said...right. Anyhoo - I disconnected my ancient wireless router and put the cd in - started doing its thing and then it asks for a router name and password...the only name and password I have is from my old ancient router...how could it be the same? Where do I find this info? Thank you for any help!

Just go to the Linksys support site, find your router model and hardware version there, and download the User Guide or User Manual for your router, and there's all kinds of useful information there. I'm surprised that there isn't a "Quick Start" guide in with the router that gives basic instructions like go to 192.168.1.1 and then how to login to set up your router. But it is in the downloaded user manual for sure.

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Itunes keeps asking me for a user name and password when I first open it.

I do not allow apple to access my library or my hard drive because you guys are predators, and I have NO interest in using the app store. I have disabled access to the store, so i do not know why it keeps asking me for a user name and password. You have NO right to see the music THAT I PURCHASED a loooooooooong time ago. It is my license. I should be able to play it whenever and wherever I like...and NO, I do not burn and copy my music. I just want to play it on MY MACHINES. So, I do not need your useless snooping, which is probably the reason you want me to log in. Who do you think you are? You didn't write the songs. You just sell licenses. Period. And I purchased mine, thank you. I no longer use your store for these reasons. I use Amazon.

Not control-R. Command-R. Shut the computer down. Reboot it. Hold down cmd-R when you hear the chime. Keep it held down and you should see the Lion recovery partition.
http://support.apple.com/kb/ht4718
http://support.apple.com/kb/ts3273
Matt

My computer is asking me for my software name and password how can i recover this information?

need some help trying to download something and asks me for my software name and password how can i recover this information?

Care to share which OS you are using?
Which model iMac?

Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs.

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Help here > Mac OS X: Changing or resetting an account password

HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
I'd also like to make address labels and don't know where to find that either

You would make address lables with the Contacts app.
If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

I just switched to Charter. When going to Mozilla Firefox a box appears saying, Authentication Required and asks for a User name and Password. What do I do?

I switched from CenturyTel to Charter. I can't use Firefox because a box appears asking me for Authentication Required, User Name and Password. When I hit cancel, this message appears:
HTTP 401 - Unauthorized
Authorization is required to access the configuration server.
You must enter the correct username and/or password.
When I called Charter, they told me they recommended using Internet Explorer. I told them I didn't want IE, I preferred Firefox. They recommended I go to your support page, so here I am. :o)

Have you reset the password recently for the email account?
A real simple fix usually is to delete the mail account (settings < mail contacts calendars, tap the affected account and choose delete at the bottom) Then re add the account.

I clicked on "remember this computer" accidentally. I want to disable this and not have my sign in name and password already there. How do I disable "remember this computer"?

When wanting to sign in for email, a screen pops up asking if you want "to remember this computer"? I accidentally clicked on remember instead of the X, to close it, and now my computer has my email name and password in place whenever you want to sign in. I share this computer with 4 other family members, and I do not want my name and password remembered on the computer. How do I get the remember this computer changed to no?

See:
* https://support.mozilla.com/en-US/kb/make-firefox-remember-usernames-and-passwords#w_viewing-and-deleting-passwords
on the same way in option- Security uncheck remember/ warn password for site

I reinstalled my mac os x, and anytime i try to update my software its asking me for an administrators name and password, i enter it and it comes back wrong, and that is the only one i have, i have been to keychain but it does not make any sense to me,

i have just reinstalled my mac os x, in fact yesterday, i have not been able to update my software or change anything at all, i try to do a software update and it is asking me for an administrators username and password that was not happening before, i enter the username and password i created and it comes back wrong, its driving me nuts, been to keychain but unable to figure it out, its asking for a system unlock and i have no clue what that is.
am desperate.

Stick the 10.6 disk into the computer and reboot holding the c or option key down, select the disk to boot from.
In the installer menu is a Utiltiies menu and a password reset.
If you don't remmember the name, reboot the computer holding the command and s keys down
a black screen with white type appears, when it's finished, dbackspace any extra ssss you have made and then type
ls /Users
(that's Larry, Sam, space, slash, Users)
and press return, a list of user names on the machine appears
type exit and reboot and use the 10.6 disk to reset your password

Prompted for lpadmin group name and password when adding printer

I was running into a prompt to enter an lpadmin group name and password whenever I tried to do any printing, so I decided to go ahead and reset my printer list. Now I'm trying to add my local printer to the list and I'm still getting the same prompt.
I found this solution: http://support.apple.com/kb/ts2754
on the Apple website, but it's not working for me.
Perhaps it's because I'm unfamiliar with working in Terminal, but I'm entering the text exactly as it's written on the support page
dseditgroup -o edit -p -a(affected_username) -t user _lpadmin
with, of course, my username substituted for the "(affected_username)" but I'm getting an error message in Terminal that says:
syntax error near unexpected token `('
Any suggestions or help? It would be much appreciated!

Looking at the command again step 3 says to replace "(affected_username)". Since the parenthesis are included in the quotes try leaving them out as well.

What does DE want when it asks for Adobe user name and unlock code? I have tried my acct ID, user name with my password but that does not work.

This is the screen I get when I want to add a book to digital editions.
All I want to know is what they are asking for. I thought it was my user name and password but all kinds of combos or scr name, acct name, login name and password does not open the book

Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time

ChaRM & CTS+ configuration for BOBJ 3.1 and 4.1

Hi ,
I am looking Change & Release Management control using SAP solman for BOBJ object .
I have checked the few link for ChaRM & CTS+ configuration guide for BOBJ 3.1 and 4.1 version.
But still not more clear about the BOBJ configuration in CHaRM.
Please post the related details or link for the same.
Also i am looking how to systems stay in sync using the ChaRM for BOBJ version.
Rg,
Karthik

see this powerpoint I picked up a few years back > https://drive.google.com/file/d/0B1emKh_80XNDV1haY1dzRW9sc28/edit?usp=sharing
Have you checked this guide?
http://scn.sap.com/docs/DOC-28446
Hope this helps!

Recommended configuration for Oracle VM Server and VM Manager

Hi,
Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.

The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.

Communicator configuration for sign in name and do...

Similar Messages

Maybe you are looking for