ChaRM & CTS+ configuration for BOBJ 3.1 and 4.1

Hi ,
I am looking Change & Release Management control using SAP solman for BOBJ object .
I have checked the few link for ChaRM & CTS+ configuration guide for BOBJ 3.1 and 4.1 version.
But still not more clear about the BOBJ configuration in CHaRM.
Please post the related details or link for the same.
Also i am looking how to systems stay in sync using the ChaRM for BOBJ version.
Rg,
Karthik

see this powerpoint I picked up a few years back > https://drive.google.com/file/d/0B1emKh_80XNDV1haY1dzRW9sc28/edit?usp=sharing
Have you checked this guide?
http://scn.sap.com/docs/DOC-28446
Hope this helps!

Similar Messages

CTS+ configuration for CRM Java stack

Hi gurus,
I want to implement CTS+ configuration for java stack of CRM system.
Please any one help me on this is there specific setting for that.
In the process of configuration it is asking for SDM password.
So I am confused that wh which SDM Password will be supplied SOLMAN or CRM SDM password.
Please help urgently.
Thanks in advance
Dhiraj

Hello Dhiraj,
You might want to have a look at SAp Note 1045501, it states:
> The "Best Practices for Implementing CTS" guide in SAP Developer Network (SDN) explains the architecture and components of CTS. It contains descriptions for possible system landscapes and configuration examples for various application cases. https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58
Please follow the link. Then just click on the view how to Guide button. This document talks about the dual stack landscape.
I hope you find it a bit more helpful than the first document.
Regards,
Paul

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh

CTS+ configuration for NWDI - Development configuration error

Hi All,
I really need some help on this. we are configuring CTS+ on Solution Manager system for NWDI, EP landscape (EPD, EPQ,EPP) and SLD system.
we made EPD as development system and trying to use CM Services to configure the NWDI scenario SDA/SDC Deployment.
I have created all NON-ABAP systems and created the CTSDEPLOY Http connections. I am getting the popup to configure the Development Configuration,"What is the User I have to use here and of which system?" and what are the authorizations required to configure this.
As soon as the popup comes, It is asking for the user ID and Password. I am entering Solution Manager (Admin user with all CMS actions also assigned) user then it is giving the following error on the screen. " Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
I have give the SLD url correctly, and the admin user for SLD and Password. I have cross checked the user for password, every thing is fine.
I really appreciate your help.
Thanks,
Ramu J.

http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Hi Ramu,
Pls answer me for below.
specified SLQ as my SLD
1.
You said SLQ is you SLD, but You configuring CTS on solution manager. but solution manager has its own SLD.
a. SMG solution manager SLD
b. SLQ is also SLD
If there is two sld then you should get error
" Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
This is becuase you are giving the user which is present in SLQ SLD but CTS is checking the Solution manager SLD.
For CTS you should have centralied SLD.
2.
Can you tell me one more thing, in CTSDEPLOY do I need to give the SMG host and port number or EPD's host and Port number?
You have to specify the host and port in CTSDEPLOY of the system on which CTS contoller should work i.e EPD or SMG.
To resolve your all this problem first of all make the SLD as central . i.e Make solution manager ( CLQ ) as SLD or SLD system in you landscape ( SLQ ) as SLD.
don't keep two different SLD . If you keep Solman as its own SLD then CTS will search component from SMG SLD
Pls follow the guide
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
3.
Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function
Can you tell us in which system this SAPNWDI user is present
Check the SLD of of system in which SAPNWDI user i present
system is whether in SMG SLD or SLQ SLD
If you are not clear with my above suggestion pls let me know.
Thanks
Anil
Edited by: Anil Bhandary on Oct 24, 2009 10:28 AM

Recommended configuration for Oracle VM Server and VM Manager

Hi,
Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.

The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.

VIP (Virtual IP) on a cluster env for BOBJ 3.1 and rich client

All,
I am in 3.1 where I have an installation with 1 cluster and 2 app server machine behind.
in order to load balance between the 2 app server I am using some VIP address using some sticky session.
It works perferctly when i am logging to it thru the infoview However we would like to try the same when trying to login from the rich client.
is it possible ?
thanks in advance
Philippe

If using WRC in 2-tier then it connects to the CMS and directly to the reporting DB (any DB middleware is configured on the client) so the load balancer doesn't even come into play in this scenario. The WRC can be downloaded from infoview or installed by CD.
If using WRC in 3-tier (globe shown in the system). Then it should work fine. 3-tier will need an extranet file which contains connection info so it can use the web/app to forward requests using the servers middleware. The connection server needs to be running to connect to the reporting DB.
To connect in 3-tier verify that you don't have any extranet files in my documents\my business objects documents\locdata on the WRC client. Then open infoview using the URL of your load balancer, and set your webi preferences to use WRC. Select new webi doc (this should create a new extranet file at the above location using the loadbalanced URL. Also needed for this to work are WRC installed (you should be prompted if not) and the connection server running and enabled in the CMC > servers.
Also see [this doc|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_web_intelligence_rich_client_en.pdf]
Regards,
Tim

Optimal Hard Drive Configuration for Premiere Pro CS5 and Pro Tools

I am in the process of upgrading a workstation that is used primarily for multi-track audio recording in Pro Tools to use the following Adobe CS5 products for production of promotional videos in HDV (and AVCHD for the web) as well as printed marketing materials for bands and musicians: Premiere Pro, Encore, Photoshop, Illustrator and Soundbooth.
Since Premiere Pro is probably the most demanding application of the group, I have been studying the suggested hardware configurations on this forum with great interest, particularly HARM's suggestions (including his Generic Guideline for Disk Setup) to determine which hard drives to purchase and the optimal manner in which to configure them.
I am upgrading an HP Z800 with dual quad core 2.44 GhZ processors with hyperthreading (16 virtual cores), 12 GB of memory and an overclocked GeForce GTX 470. Without setting up a RAID configuration (which I cannot afford at the moment), I would like to use the 4 available HDD bays in the Z800 in the optimal manner for Premier Pro, using currently available drives. I am currently considering purchasing a 300GB VelociRaptor to use as my C drive because of the extended load times and demands placed on the drive by ProTools and the associated Waves plug-ins.
I would appreciate suggestions to improve my following plan: C (300GB WD VelociRaptor) for OS and Programs; D (1 TB WD Black Caviar) for Media and Projects; E (1 250 GB WD Black Caviar) for Pagefile (approx. 18 GB) and Media Cache; and E (2 TB WD Black Caviar) for Previews, Exports and Pro Tools audio files.
I have great respect for the knowledge of the members of this forum and eagerly await your suggestions.
/Bill

I very much appreciate the responses to my email because I know that all of your time is valuable and that you have chosen to use some of that valuable time to help an unknown individual. This forum is remarkable because of the wealth of knowledge available and the willingness of so many to assist others.
I now wish to narrow my questions to save you time and so that I can get specific advice. I may not have not been clear that I have already upgraded to the HP Z800 with dual quad core processors and overclocked GTX 470, primarily for the improved performance it will provide in ProTools. My question now is how to optimize its performance for Premiere Pro CS5. Based upon my research, I am considering the following two upgrades, but I am open to other suggestions if they would provide better results at a similar cost
1. I am considering purchasing a 600GB WD VelociRaptor ( WD6000HLXH) for my C drive on which I would place OS (Windows 7, 64 Bit) and programs in an effort to reduce loading times of large programs. I have two questions: (1) Are members of the forum seeing a significant improvment in program loading times with the VelociRaptor because I am still not convinced that the price performance of SSD's justifies their use; and (2) There are so many models of VelociRaptors now that I want to be certain that I am purchasing the best version for my needs. In addition to the usual 10000 RPM speed, this model has 32MB Cache and a 3.5" form factor as well as a SATA 6.0GB/s interface (which I doubt my motherboard can take advantage of but it might extend the useful life of the drive with future configurations).
2. I currently have available for installation in the Z800 the following drives: (1) WD 2TB Black Caviar; (1) WD 1TB Black Caviar; (2) Hitachi 1TB. I believe that the Z800 can accept up to 5 SATA hard drives which I will have if I purchase the Velociraptor. Although I am reasonably knowledeable when it comes to hardware, I have never set up a RAID configuration. Therefore, it would be helpful if someone could recommend one of the various RAID configurations and brieflyexplain why it would seem to be best for my needs. I can then focus my research on understanding that one configuration.
I was planning to follow Scott's suggestion for my current 3 drives: OS and programs on C (WD 600 GBVelociRaptor), media and projects on D (WD 1TB Black Caviar), export files and Pro Tools files (all live musician tracks, no samples) on E (WD 2TB Black Caviar). However, I have been reading about the benefits of a RAID configuration so I am interested in further suggestions now that I have clarified my questions.
Thank you all for your help.
Bill

New Outlook 2013 Installation - How to configure for default pop email and access exchange 2003 server for shared folders only

I have successfully installed and configured outlook 2013 to access my pop.integra.net email accounts. We have an 2003 exchange server we use for shared folders which I am having difficulty accessing.
My preference would be to set up my access to the exchange server and use the same data folders for email as are in use for my pop email account. In outlook 2003 this was simple, but in 2007 on up it seems this feature has been hobbled. Is there
a workaround to get both accounts to use the same database?
Next issue is if I use the Mail client wizard under Control Panel to set up access to the exchange server - everything looks fine but when launching outlook I receive the following 2 error messages:
"The resource that you are trying to use is located on an unsupported version of Microsoft Exchange. Contact your e-mail administrator for assistance."
"Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Your Microsoft Exchange administrator has blocked the version of Outlook that your are using. Contact your administrator for assistance."
Obviously the optimal solution is to upgrade the Exchange Server - assuming that is not an option - are there any workarounds?
Any assistance would be appreciated.

Downgraded to Office 2007.
So now have a new Windows 8.1 laptop with outlook 2007 installed.
From what I have been told this should allow me to connect to the Exchange2003 server
I set up the pop account - works fine
set up the exchange account through Mail.exe and am unable to launch outlook.
"Microsoft Exchange is Unavailable"
"Retry - Work Offline - Cancel"
Then
"Cannot start Microsoft Office Outlook. Cannot open the Outlook Window. The set of folders cannot be opened. The information store could not be opened."
The data file path is the same for both the pop account and the exchange account:
C:\Users\Scott\app data\local\microsoft\outlook\outlook.pst
How do I get this to work?
Help!

Configuration for LDAP IP Address and Port for Exchange 2010

Let's say Exchange 2010 is installed on a computer that is joined to a domain. However, I would like to redirect LDAP authentication to another IP address and another port like how sharepoint implement it below
http://sharepoint.stackexchange.com/questions/33540/ldap-authentication-connection-string
Is it possible to do the equivalent for Exchange 2010?
Note: I would like to do this without installing any Edge Transport server or Microsoft Forefront TMG

The question I would need to ask is "Why would you need to do this?" I ask because Exchange requires an Active Directory account for authentication. That account may have permissions from some other directory (as in a linked mailbox),
but the account is used to find it. For SharePoint, you can authenticate to other directories directly.

Communicator configuration for sign in name and do...

If I go to my companies CWA URL, I get the web access screen. It prompts me for a Sign-In Name (my email address in this case) and a Domain\user (my Windows/Active Directory) account. If I do not enter both, it fails to login. How do I do this on my N8? There is only one username box, which is the Domain\user value, but none for the other value. When I try to sign in, I get an error complaining about network issues and error code -36. The network is fine, as I get incorrect username when I enter the wrong details, but I get nowhere with these current config.
Cheers
Marc

To further extend this, I get an error "Sign in cannot be completed due to network issues." Error -36.

HT202076 Best configuration for AP Extreme express and Timecapsule

Hi I've an Airport Extreme which i bought last year in living room connected to BTHub5 Bt hub wireless is disabled as need the ports for hardwiring and is where the lead from the BT box connects to bringing in the internet The Extreme is set up to create a 5Ghz only network as were all Apple fanatics Ive a 2TB Apple Capsule in family room extending the net work and used for hardwiring tv audio etc in this room with an Apple airport express in this room to extending 5GHz network also have an Apple Express upstairs extending 5GHz network
Ive seen speed of 1035mbs from Extreme to capsule and 866mbs from Extreme to Mac
But recently I've seen adip in performance across my network and wondered what the best set up would be can't do a hardwired roaming network due to cables not being able to go through walls and wondered how best to optimize this set up ? Thanks in advance

The best set up is when the AirPorts have a line-of-sight relationship with each other.
You probably won't be able to attain that goal, but try to come as close as possible.
Other than moving the AirPorts closer to each other, that is all that you can do
The Extreme is set up to create a 5Ghz only network
That may be, but the AirPort Extreme is still broadcasting a 2.4 GHz signal, as are the other AirPorts that you have there.....and this band is much more likely to pick up interference that can slow things up a bit for devices on the 5 GHz network and even over Ethernet connections.
Unfortunately, you cannot turn off the 2.4 GHz signal, so not much that you can do other than keep cordless phones as far away from the AirPorts as possible.

CTS+ Configuration in PI 7.4 for SLD specific data

Hello Guys,
I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
Its very urgent.

Did you happen to see this document of a CTS+ configuration for 7.3 (should be fairly the same for 7.4)? CTS+ Configuration for PI 7.3
Steps 1.2 and 8.2 have references to roles.

CTS+ configuration in PI 7.4 to transport SLD specific data

Hello Guys,
I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
Its very urgent.

Hi Bharatram,
Apply the below roles to the user
SAP_XI_CMS_SERV_USER
SAP_XI_DEVELOPER_J2EE
SAP_XI_CONFIGURATOR_J2ee
and refer the below blog
CTS+ Configuration for Process Orchestration (PI/PO) and AEX 7.31 (JAVA Only Stack)
regards,
Harish

GRC AC 10 (RAR/CUP/ERM) configuration for EP system

Hello Gurus,
We are aware of configuring RAR/CUP/ERM in GRC AC 10 for ERP system(back-end)
Are there any documents /links to provide information on configuring the above components for EP system ??
Or rather specific which of the following configuration is possible for EP system ?? CUP /RAR/ ERM ??
Also going further , is there any way in which we can configure the same for BO system ??
I am not quite sure if there is any PLUG-In as such which is available for BO system or not .
But in my opinion there is no need to perform configuration for BOBJ system as the roles in them are imported from Backend system (ERP/BI etc) , hence if these roles are already taken care during ERP system cleanup and SOD analysis , there should be no need to configure seperately RAR/ERM/CUP.
Please provide your comments.
Regards,
Victor

Hello Prasad,
Thank You for your quick response .. the info was quite helpful.
Will you please put some light on aspects of integrating AC 10 with BO ??
Is there any connecter available for it?? Which scenarios are possible ??
Humbly Requesting your help.
Thanks in advance.
Regards,
Victor

ChaRM & CTS+ configuration for BOBJ 3.1 and 4.1

Similar Messages

Maybe you are looking for