Community Portlets not rendering valid links

I've created several of the Community portlets in an organization other than the Community Sample, and when they render, the links to get to the different communities are not valid. When I click on them, I just go back to the same page. For example:
http://myserver:8080/portal/dt?=jdo__MyTestCommunity_Container&com.sun.portal.desktop.current.membership=jdo__MyTestCommunity___owner____jdo__MyTestCommunity___member&com.sun.portal.desktop.temporary.membership=NONE
It appears that the container attribute is missing after the "?". Has anybody seen this before, and if so, any solution. Thanks.
Message was edited by:
GDCTG

Hi GDCTG,
Some thoughts.
* make sure that you have the Portal Desktop Community Service attributes set for the user's organization and every role that the user belongs to. The attributes and default values are:
CommunityHomeContainer=CommunityHomeContainer
CommunityCreateContainer=CommunityCreatePortlet
CommunityParentContainerURLParameter=CommunityParentContainer.selectedChannel
Here's an example of setting the CommunityHomeContainer attribute using the psadmin utility,
/opt/SUNWportal/bin/psadmin set-attribute --adminuser amadmin --passwordfile passwordfile
--dn "o=EnterpriseSample,dc=sun,dc=com" --portal portal1 --component desktop
--attribute-name CommunityHomeContainer CommunityHomeContainer* add the Sun Java Web User Interface theme and JavaScript utilities to the portal desktop parent container.*
Specifically, add the:
- Tag Library URI
<%@ taglib uri="/tld/portletSetupTags.tld" prefix="pui"%>- Sun Java Web User Interface Theme tag and JavaScript utilities to the HTML HEAD as follows:
<HEAD>
<pui:setupTheme themeName="defaulttheme" supportedLocales="en,en_US"
sessionDataStrategyClass="com.sun.web.ui.portletSetup.PSSessionDataStrategy"/>
</HEAD>hope this helps, dean.

Similar Messages

PageFlow Portlet Not Rendering

Hello everybody,
I'm trying to use a page flow as a source for a portlet.
Unfortunately the portlet content is not rendered; instead, just the portlet window with the title bar is present.
No error message is present on either the console or the server log.
The PageFlow is a trivial one -- containing just the begin action and the index.jsp file (faces). I was able to test the pageflow directly from the IDE (choosing the `*Run on Server..*` menu action). The index.jsp content was rendered as expected. But when I tried the URLs for the portal or the portlet, no content was rendered!
I tried the combinations: WebLogic Portal 10.2 + Workspace Studio 1.1 and WebLogicPortal 10.0 + Workshop for Weblogic Platform with the same result.
What is the problem?! Has anyone ever experienced something similar?
(According to the [BEA Portlet Dev docs|http://edocs.bea.com/wlp/docs100/portlets/building.html#wp1062050], using a PageFlow as a source for a portlet is a perfectly good option.)

James thank you for your answer. I did not know about the Portal forum. May I ask the forum's admin to move this thread over there? I don't like to double-post.
Coming back to the issue, I can confirm that indeed this is the most basic example of a portal (created ``by the book`` with a Portal EAR and a Portal Web project). And indeed, I am able to run the portlet directly from within the Workshop; I am also able to run the JPF directly from within the Workshop.
Perhaps a sketch can explain better what I'm experiencing:
Request for `dummy JPF` URL ----------------------> content rendered (as expected)
Request for Portlet with `dummy JPF` URL ----------------------> NO content rendered (+unexpected+)

Extenal component not rendering file links properly

Hi Adobe CQ expert,
We need to include an external web app (based on asp) into our new CQ website. The asp web app is a search engine which searches another internal document database and returnes a list of files such as powerpoints, pdfs etc. These documents cannot be migrated into our CQ database due to various reasons.
We are using the default 'external' component to include our web app. All works fine until we realise CQ prefixes it's own url to the file hyperlinks which are returned by as search results.
For example,
When the asp app running standalone, a file hyperlink looks like this:
<a href="http://companywebsite.com/search/display.asp?id=FC/07/000009">meeting document</a>
And clicking on that link will prompt using to download the file.
But when it is included in CQ using 'external' component, we got:
<a href="http://companywebsite.com/content/companywebsite/search-documents.html?CFC__target=http%3A %2F%2F10.xx.xxx.xxx%2Fsearch%2Fnew-intranet-display.asp%3Fid%3DFC%2F07%2F000009>meeting document</a>
// I hid the actually ip address using 'xx' in this post
How can we strip the CQ url and also format the rest to make sure it doesn't come with all these %2 etc?
Thanks!

You are passing the url in querystring and needs to escaped as per standards[1]. So it is correct.
I am not sure Try adding an optionally attribute [2] in the <a> helps & note that attribute makes link checker not even check for validity for link.
[1] http://en.wikipedia.org/wiki/Query_string#URL_encoding
[2] x-cq-linkchecker="skip"

Spark portlets not rendering

This is becoming anoying !!, Please help.
I installed JES 2005Q4 Portal Server, and I am having a hard time getting Fatwire spark Portlets to render inside the Portal Server.
I have read the FAQs on Fatwire site on this issue but the problem is still the same.
The other thing is that JES 2005Q4 comes with Portal server 6 and not 7. I am running solaris 10 on x86. Portal server web container is Application Server 8.1. EE
The jsproot written to futuretense.ini is cs.jsproot=/var/opt/SUNWappserver/domains/domain1/applications/j2ee-modules/cs/jsp/
inside the jsp directory is a directory called cs_deployed, outside jsp in cs the following folders exist: com, eWebEditPro, futuretense_cs, jsp, META-INF, SparkSample, WEB-INF, Xcelerate.
Can some one tell what is supposed to inside this jsp folder, because I dont think I understand this anymore..
Does fatwire have any documentation on installing fatwire on Portal Server 6 2005Q4???? the documentation is all centered on Portal Server 7, and it is so decieving.

I managed to solve the problem. I will have award myself the Duke dollars.

"not a valid location for linked resource" in Flash Builder 4.7

Hi,
I'm constantly running into the problem, that Flash Builder simply won't let one create a linked resource that points to a location on the same drive?
I'm getting the infamous
"...not a valid location for linked resource..."
error message.
I'm using FB 4.7 with Flash Professional CC.
Is that supposed to work at all?
I've 1 workspace where I've successfully created a linked resouce - but it fails for all others. Even when I'm setting up a new WS.
And it's totally unclear to me why it had worked there but not in all others that I'm trying to create.
André

A year later, but I'm facing the same bug.
If your ever found a solution I'd be glad to hear.
I filed a bug with more details and my own workaround:
3697022

Link to content area - portlet not available

I have a link to a content area in that I open from another application. Occassionally, I get a "portlet not available" message. Is this related to navigating directly to the document repository? It works most of the time.
So 3 questions:
Is it acceptable to navigate directly to the content area? (My users then log on and store documents)
Am I getting the "portlet not available" message because of navigating to the content area this way?
Is there another reason I'm getting this message?
Thank you

Unfortunately, the only way to do this would be to not show the sub-folder region and add URL items in another region that link to the folder page in question.

Command links are not rendering properly in panel collection toolbar facet

Hi
I am using jdev 11.1.2.3.0
I added toolbar component to the toolbar Facet of panel collection component .
Under the tool bar I added two command link components with name create and delete,
the problem is at run time the buttons are not rendering properly,they are hiding,instead of links
this symbol(>>) is displaying.
On clicking the symbol,I am able to see the links,I used <af:spacer> after the links but not worked.
what I have to do to render the links properly in the panel collection toolbar facet

Hi Timo
This is the code and I am using 11.1.2.3.0
     <f:facet name="toolbar">
                <af:toolbar id="t1">
                        <af:commandImageLink icon="#{resource['images:create.png']}" text="Create" id="cbInsert">
                        <af:showPopupBehavior popupId="p1"/>
                    </af:commandImageLink>
          </af:toolbar>

Command links are not rendering properly in the toolbar facet of panel collection

Hi
I am using jdev 11.1.2.3.0
I added toolbar component to the toolbar Facet of panel collection component .
Under the tool bar I added two command link components with name create and delete,
the problem is at run time the buttons are not rendering properly,they are hiding,instead of links
this symbol(>>) is displaying.
On clicking the symbol,I am able to see the links,I used <af:spacer> after the links but not worked.
what I have to do to render the links properly in the panel collection toolbar facet

Hi Timo
This is the code and I am using 11.1.2.3.0
     <f:facet name="toolbar">
                <af:toolbar id="t1">
                        <af:commandImageLink icon="#{resource['images:create.png']}" text="Create" id="cbInsert">
                        <af:showPopupBehavior popupId="p1"/>
                    </af:commandImageLink>
          </af:toolbar>

Add Content button not rendered inside Portlets on edit mode

Hi,
I have a requirement where administrators will add some external content(Add content) either from taskflow or portlet and that external content (along with taskflow output) will be shown to the users based on some logic performed inside the taskflow/portlet bean code.
This PanelCustomziable should render AddContent button inside the portlet when pressing ctrl shiftE, but its no doing so? Where as the same PanelCustomizable renders AddContent button inside the taskflow on edit page? Any settings or changes needs to be done to make it work in porlet when consumed in portal?
a)taskflow cannot be selected for this purpose, as there will be only a single instance of the taskflow across the portal and it cannot retain runtime MDS changes to a specific instance (Unless we design the ADF taskflow with MDS customization layer). By default, any runtime change in one taskflow instance will be propagated to all the other taskflow instances of the portal.
(For eg.. Admin drops this taskflow onto a page1 and adds a image(external content) using the button AddContent inside the taskflow because of PanelCustomizable and close the page. He drops the same taskflow from RC only to find that the changes he done on page1 is being retained here ..its not resuable because of no MDS per instance)
So we selected Portlet for this purpose, as it has the inbuilt personalization framework. Admin can personalize each portlet instance and drops on the the same page and diff page again. But with portlets, Add Content is not rendered.
Its not just external content, the taskflow / porltet has some logic to perform and displays some output based on the ruleId which is the input parameter.
Taskflow or jsff code
==================
<cust:panelCustomizable id="pc1">
<cust:showDetailFrame text="rules content" id="sdf1"
shortDesc="rules content">
<af:panelGroupLayout id="pg1" >
<af:outputText label="RuleId" id="ot1" clientComponent="true"/>
</af:panelGroupLayout>
</cust:showDetailFrame>
</cust:panelCustomizable>

Can you please post this question to weblogic.developer.interest.portal
newsgroup.
Thanks
"Lodewijk Spijker" <[email protected]> wrote in message
news:3f165945$[email protected]..
Hi,
i am using Workshop 8.1 (GA release july) and i have discovered a bug (ora
feature) with respect to the beta version.
i have created a simple portlet with a view mode and an edit mode. When i
place the portlet on the very first page of a one book portal, it works
perfectly. However, i have a book with three pages and placed the portleton
the second page. Now when i put the portlet in edit mode, by clicking the
edit button, i am directed to the first page of the portal and the portlet
will not show.
Inspection learned that the URL generated for the edit button, didn't
contain the _pagelabel parameter. When i added the parameter manually it
works fine.
A final remark is that the buttons in the titlebar have no icons thebrowser
can load.
hope someone can help me out,
Lodewijk

C#: 'Not a Valid File Name' error when I know the name and link are correct.

I'm receiving "Not a valid file name" when I know I have used this link before and the filename is spelled correctly. I'm not sure if I should be looking at something else. This is my connection code. It fails on "conn.Open()".
For security reasons, I edited the link... it is not a working link for this question.
private void InitializeDBConnection()
strConn = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=http://database.storage.net/App_Data/Tracking.mdb";
MessageBox.Show(strConn);
MyConn = new OleDbConnection(strConn);
MyConn.Open();
SV

A database must be locally available via the filesystem, e.g. an UNC path would do it also.

Linked psd not rendering correctly. Text and colour shows up wrong. What's happening?

I'm trying to use linked psd's but when I go to link one, the text shows up all wrong.
I'm not resizing the linked psd at all, and i'm saving it exactly as I would save my main psd.
Does anyone know how I can fix this?
Here's a comparison.
The text from the linked psd is on the left, and the text from the psd that's containing the linked psd is on the right.

I'm not sure what you mean by "linking"? Have you tried Layer > Matting > Defringe? What happens when you flatten the file?

Pr link Ae not rendering correctly

Hi,
I'm relatively new to this type of workflow and will try to communicate the problem the best I can. My main goal is to trouble shoot where the glitch is.
The Problem:
I am editing 4K and 5K footage in Pr on a 1080p timeline and sending some clips to Ae for effects. Not sure if I'm pushing the limits on how these two programs communicate, but I'm getting strange problems in the renders. They are glitchy and not representative of how I effected the clip in Ae. The layer will hop around and loose resolution for a couple frames. Very random. Just to be clear "the renders" are from when I select the clip on the Pr timeline and "render selection". Not rendered straight out of Ae to a separate folder.
Type of effects.
On my timeline I "set to frame size" for some clips, "scale to frame size" for others. I often "reverse clip" in either Pr or Ae.
In Ae I use the TimeBlend effect with keyframed accumaltion. I ramp speeds on keyframes as well. Lots of stuff going on and it seems some of it is lost in translation between the two softwares.

Thanks for that. Another thing I didn't mention is that I changed the duration of the Ae comp settings after sending it to Ae to accommodate a speed ramp. That might have confused it a bit. I may go with a render and replace method though. My source media is a mix between RED 4K files, and image sequences baked into 5K ProRes QT files. So much potential, but unruly to work with. Hard to edit this piece when I spend most of my time waiting for renders just to get a preview. I thought of using proxies which is a new work flow for me.
Does sending a sequence from Pr to Ae then creating a proxy workflow in Ae present any problems? Just trying to find the best way to edit as close to the speed of thought that I can. I'd love to be able to add a Time blend effect, preview it in the edit, tweak it, preview it again... so on and so forth.
Thanks.

ADF portlets not that well supported

Is it just me or are ADF portlets not that well supported in webcenter application?
I am working on them for a few months now and i seem to get one problem after the other and most of them are related to ADF portlets.
Oracle created the portlet bridge in order to create ADF portlets but why are their so many problems with the ADF portlets?
Currently we are thinking on developing taskflows instead of portlets because some (not all) of our problems are solved with that but than we have to do some extra development offcourse...
Some issues we are facing with adf portlets:
Using popups in ADF portlets: we have created some portlets with a table and each row has a detail button that opens a popup. The popup is bigger than the original portlet so what happens... THe portlet does not stretch, it shows scrollbars instead. Not realy user friendly.
When we create the same thing in a taskflow, the popup is rendered in the page instead of the "portlet".
inter portlet communication
Take a look at the documentation of webcenter and try to find one example of an ADF portlet that sends an update to another portlet. They always show examples of normal JSP portlets or the omniportlet.
I've done a great deal to find it and i made it to work but their is also an issue involved with it... In order to set the navigation parameter we should have a reference to the actionResponse of the portlet and you only can get this with a full portlet refresh so no partial page rendering here.
As it appears when you set the partialSubmit of a commandButton to false, the action or actionListener gets ignored in a portlet so the code that should normaly get the reference to the actionResponse never gets executed unless you set the partialSubmit to true but than the reference to the actionResponse is not valid.
In normal adf application a partialSubmit to false will execute the action or actionListener so i guess it's a bug in the handling of the button.
securityContext
I know portlets all do have their own context but does the JSR 168 standard does not describe a way to pass the security roles from the consuming application to the portlet? As it appears, ADF portlets do not receive this information from their consuming application.
Has anybody else faced these issues or got some others while working with ADF portlets? It seem like their is still a lot of work to do to have a good support for ADF portlets.

But if you look at other frameworks it seems possible.
I also worked with liferay and used icefaces as JSF framework. They seem to go together very well. It had a very nice way of handling IPC using ajax. No page parameters need to be set or no partialTriggers.
For example i don't get why an ADF portlet MUST be rendered in an iframe. Why can't they think of another solution? I can't imagine i'm the first one who is facing these issues...
For example the problem with the buttons. Am i the first one not using partial page submit on a button in an ADF portlet?
Don't get me wrong. I'm not frustrated with it. I just want to know if their are other things i need to know about or if other people are also facing the same struggle as i do.
Try explaining the customer why they should buy an expensive licence for something that is not really working. The problem i wrote down here are real life problems i'm facing with a customer. We can't afford going into production with these problems...

Safari not rendering a page correctly

A webpage I created in Dreamweaver uses drop down menus that are supposed to display just to the left of the link they drop from. In all other browsers they work correctly, but since the latest upgrade in Safari to 3.0.4 as a part of OS 10.4.11 on my Macbook, they are not rendering correctly. Instead they are appearing much further to the left where it's difficult to move the cursor to them before they disappear. Until I changed the color of the drop downs they were disappearing into the background. Any ideas why Safari is not rendering them correctly? I'd like to keep Safari as my primary browser, but if it won't render my own page correctly, what other pages might it be messing up? Address of the page is http://www.montgomeryschoolsmd.org/schools/woottonhs/ The drop downs are connected to the central column list that has small arrows beside the words. They will probably work correctly for you, but won't for me in Safari. What can I do to fix it?
Thanks,
KWolfrey

Hi,
I'm running 10.4.11 with Safari 3.0.4 and as far as I can see the menus seem to work just fine here.
Do you have a custom stylesheet set in Safaris advanced preferences? (Some Safari enhancer applications set one even if you didn't manually set one so double check to make sure.)
Also, do you use PithHelmet?
One quick test you can do to help narrow down things is to try Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> \[+\] to create a test one (and \[-\] to remove it if needed)
Lastly, I doubt these [errors|http://validator.w3.org/check?uri=http%3A%2F%2Fwww.montgomeryschoolsmd. org%2Fschools%2Fwoottonhs%2F&charset=%28detect+automatically%29&doctype=Inline&g roup=0] have anything to do with your problem since it seems to work fine for me, but you might want to look into them at some point.

Page not rendering in IE6

I just updated my site and I discovered that the page is not rendering in IE6 (and IE5.5, but I suppose no one uses that anymore).
All I can see is the red background color.
The link to the site is www.schudden.net.
Can anybody tell me why the page is not visible in IE6?

I use a transparant png for the footer.
I did not use any frames to construct my site, made this from a one column, fixed header and footer template in dreamweaver.
The previous site was visible in IE 6.
I actually made a whole new layout, but he content stayed the same.
When I validate in dreamweaver it gives me two errors in the css file:
Unsupported property: _position
Affects: Firefox 1.5, 2.0, 3.0; Internet Explorer 6.0, 7.0, 8.0b1; Internet Explorer for Macintosh 5.2; Netscape 8.0; Opera 8.0, 9.0; Safari 2.0, 3.0
Unsupported value: 'fixed'
Affects: Internet Explorer 6.0, 7.0, 8.0b1; Internet Explorer for Macintosh 5.2
Perhaps this is causing the error, but I don't know how to resolve this.
There was also an error about the min-height I used. I deleted that option, but it did'n't help.
This is the source code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Schudden fansite</title>



<link href="../css/Noorderzon.css" rel="stylesheet" type="text/css" />

</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
<h1> </h1>
</div>
<div id="mainContent">
<div id="nav"><a href="index.html" title="Home">Home</a> | <a href="nieuws.html" title="Nieuws">Nieuws</a> | <a href="../schudden.html" title="Schudden">Schudden</a> | <a href="../speellijst.html" title="Speellijst">Speellijst</a> | <a href="../media.html" title="Media">Media</a> | <a href="../links.html" title="Links">Links</a> | <a href="http://www.tboek.nl/tboek/index.php?name=schudden" title="Gastenboek" target="_blank">Gastenboek</a> | <a href="mailto:[email protected]" title="Contact">Contact</a> | <a href="../nieuwsbrief.html" title="Nieuwsbrief">Nieuwsbrief</a></div>
Contenttext</div>
<div id="footer">
<p> </p>
</div>
</div>
</body>
</html>
And this is the CSS code:
@charset "utf-8";
html, body {
height: 100%;
body {
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #333;
font-family: Verdana, Arial, Helvetica, sans-serif;
font-size: 9pt;
background-color: #800000;
margin-top: 0;
margin-right: auto;
margin-bottom: 0;
margin-left: auto;
height: 100%;
body,td,th {
font-size: 9pt;
color: #333;
text-align: center;
/* Tips for Elastic layouts
1. Since the elastic layouts overall sizing is based on the user's default fonts size, they are more unpredictable. Used correctly, they are also more accessible for those that need larger fonts size since the line length remains proportionate.
2. Sizing of divs in this layout are based on the 100% font size in the body element. If you decrease the text size overall by using a font-size: 80% on the body element or the #container, remember that the entire layout will downsize proportionately. You may want to increase the widths of the various divs to compensate for this.
3. If font sizing is changed in differing amounts on each div instead of on the overall design (ie: #sidebar1 is given a 70% font size and #mainContent is given an 85% font size), this will proportionately change each of the divs overall size. You may want to adjust based on your final font sizing.
#container {
text-align: center; /* this overrides the text-align: center on the body element. */
margin-top: 0;
margin-right: auto;
margin-bottom: 0;
margin-left: auto;
background-color: #800000;
top: 0px;
bottom: 0px;
padding: 0px;
width: 100%;
#header {
width: 960px;
padding-top: 0;
padding-bottom: 0;
height: 160px;
margin-right: auto;
margin-left: auto;
background-color: #DDDDDD;
background-image: url(../images/header.jpg);
#header h1 {
margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
#mainContent {
width: 960px;
margin-right: auto;
margin-left: auto;
padding-top: 0;
padding-right: 0px;
padding-bottom: 0;
padding-left: 0px;
background-image: url(../images/mainbg.jpg);
line-height: 15pt;
.titlelink {
font-size: 16px;
font-weight: 500;
font-variant: small-caps;
color: #800000;
.alignleft {
text-align: left;
#nav {
text-align:center;
margin-top:0px;
font-family:Verdana, Arial, Helvetica, sans-serif;
font-size:10pt;
color:#000;
font-weight:700;
padding-top:9px;
padding-bottom:10px;
text-decoration:none;
background-image: url(../images/mainbg.jpg);
background-repeat: repeat;
width: 960px;
#nav a {
background:#fff;
color:#000;
text-decoration:none;
#nav a:active {
background:#fff;
#nav a:hover {
background:#fff;
color:#000;
font-size:10pt;
padding-bottom:2px;
border-bottom-width: 3px;
border-bottom-style: dotted;
border-bottom-color: #800000;
a:link {
color: #000;
a:hover {
color: #000;
a:active {
color: #369;
a:visited {
font-style: normal;
color: #369;
#footer {
color:#FFF;
border: 0px solid orange;
position:fixed;
/* Netscape 4, IE 4.x-5.0/Win and other lesser browsers will use this */
_position: absolute;
right: 0px;
bottom: 0px;
width: 100%;
background-image: url(../images/bottom.png);
height: 100px;
padding-top: 0;
padding-right: 10px;
padding-bottom: 0;
padding-left: 10px;
.subtext {
font-size: 8pt;
color: #800000;
.tableheader {
font-weight: 700;
color: #FFF;
line-height: 30px;
text-transform: uppercase;
background-image: url(../images/tableheader.jpg);
padding-left: 10px;
table tr .tableheader {
text-align: left;
padding-left: 10px;
.tablecontent {
padding-left: 10px;
text-align: left;
.center {
text-align: center;
.justify {
text-align: justify;
.linkheader {
background-image: url(../images/linkheader3.jpg);
line-height: 30px;
font-weight: 700;
text-transform: uppercase;
color: #fff;
#subnav {
text-align:center;
margin-top:0px;
font-family:Verdana, Arial, Helvetica, sans-serif;
font-size:10pt;
color:#000;
font-weight:700;
padding-top:9px;
padding-bottom:10px;
text-decoration:none;
background-image: url(../images/mainbg.jpg);
background-repeat: repeat;
width: 960px;
I hope this helps
@pziecina : the validation errors are weird, because I have a doctype in my documents.
Could this be caused by the fact that I have domainname linked to an external site (I use the free space I got from my provider, and the domainname link is forwarded to this space). Because, when I validate the original index.html file (http://members.home.nl/justme4u/index.html) it only gives me two errors.

Community Portlets not rendering valid links

Similar Messages

Maybe you are looking for