Commutation between "Run Mode" and "Edit Mode"

We run our GUI an we need from this "Run Mode" to pass to "Edit mode" so we can modify object properties like we do within a framework.
This explained by sun at: [http://java.sun.com/products/jlf/at/book/Behavior2.html], but with no indication of the manner we do it.
Are there class properties or methods that allow us to pass from a mode to an other.
With best reguards.

You are not reading the page right. The "modes" that it is talking about are application specific and are only used as hypothetical cases. If you want something similar you have to implement it yourself. Java is only the tool with which you can BUILD a solution, it does not PROVIDE the solution. Keep that distinction in mind.

Similar Messages

How can i run iPhoto and edit in elements 12 it was so easy in 11

it appears this is more complicated than going back to elements 11

It's done the exact same way. There is no change between 11 and 12. Complete instructions are here: Use with iPhoto | Mac OS

I'm stuck in run mode in the editor.

I ran my VI by itself in 6.1 and now my cursor is a finger and I can't edit anything. I've tried toggling between run mode and edit mode and I'm still stuck. Any ideas?

Is it password protected or locked? Look at the VI Properties>Security options. Is it read only? Did you accidently save it without a diagram? Is the tools menu set for Automatic Tool Selection or have you turned that off and selected the operate tool? Pressing the tab key will cycle through the various tool selections or just click on the Automatic Tool Selection button.

Hook to run script between Consumption mode and Contribution mode

Hi,
I am developing a Web Portal page with a Region Template. My page will need to have an accordion. My Region Template will push out raw HTML, and I will use jQuery to put accordion behavior on top. However, the jQuery will run at "onload", $(document).ready(function()), to initialize my raw HTML to be an accordion. It works fine in view mode, however when I switch to Contribution mode, the page shows a raw HTML.
I am looking for a hook that I can run JavaScript when switching between Consumption mode and Contribution mode. This way, I can put my initialization script in that hook. I have looked in the iDoc documentation but couldn't find any.
I would be grateful if you can help me out. Thank you very much for your time.
Linh
Edited by: 942214 on 22-Jun-2012 00:20

Are you sure your jquery isn't getting called? Switching between contribution mode should cause a full page refresh by triggering the WCM.ReloadURL js function.
Have you put in debug statements to ensure that the $(document).ready(function(){}); really isn't being called?
-ryan

Create port channel between UCS-FI and MDS 9124 (F Mode)

Dear Team,
We were trying to create port channel between UCS FI and MDS 9124
But the port channel not getting active in F mode on MDS 9124
FI is in FC End Host Mode
We have enabled FC uplink trunking on FI
We have enabled NPIV on MDS
We have enabled trunk on MDS
FI and MDS in default VSAN
To check we changed the FI mode to FC Switching mode and port channels became active but in E mode
when we enabled FC uplink trunking on FI and FC Switching mode port channels became active in TE mode
but in both the above cases showflogi database shows WWPN of SAN alone not showing any from FI.
How to achive this?
Have read that no need to change the swicthing mode to FC Switching mode and keep as FC Endhost mode
SO how to achieve Port channel with F mode in MDS and FI ( Mode showing as NProxy)
Does it has to do anything with MDS NX-OS version? (https://supportforums.cisco.com/thread/2179129)
If yes how to upgrade as license for ports came along with Device and we do not have any PAC/PAK or license file as it came
with license
Also we have seen 2 files availabe for download (m9100-s2ek9-kickstart-mz.5.2.8b.bin and m9100-s2ek9-mz.5.2.8b.bin) which to use
Thanks and Regards
Jose

Hi Jo Bo,
what version of software if your MDS running?
On your UCS do connect nxos and show inteface brieft and look at the mac address.
it is possible that you might be hitting the bug below. if this is the case you might need to upgrade the firmware on your MDS.
Add MAC OUI "002a6a", "8c604f", "00defb" for 5k/UCS-FI
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCty04686
Symptom:
Nexus switch unable to connect any other Nexus or other Cisco Switch in NPV mode with a F port-channel. Issue might be seen in earlier 5.1 releases like
5.1.3.N1.1a
but not the latest
5.1.3.N2.1c
release. Issue is also seen in
5.2(1)N1(1)
and
6.0(2)N1(1)
and later releases.
Conditions:
Nexus configured for SAN PortChannels or NPIV trunking mode Nexus connected to UCS via regular F port channel where UCS in NPV mode NPV edge switch: Port WWN OUI from UCS FI or other Cisco manufactured switch: xx:xx:00:2a:6a:xx:xx:xx OR xx:xx:8c:60:4f:xx:xx:xx
Workaround:
Turn-off trunking mode on Nexus 5k TF-port Issue does not happen with standard F-PORT Remove SAN Portchannel config
Further Problem Description:
To verify the issue please collect show flogi internal event-history errors Each time the port is attempted OLS, NOS, LRR counters will increment. This can be determined via the following output, show port internal info all show port internal event-history errors

Cannot use "Edit Mode" property to dynamically open a VI in "run mode"

Hello,
I am trying to dynamically open a vi, and would like it to open up in run mode when dynamically called. I am trying to use the "Edit Mode" property to do so by setting it to false before the vi is actually opened by the Open method. However, it always seems to open up in edit mode. Am I doing something obviously wrong here? I am enclosing a screengrab of the vi.
Regards
-Ted
Attachments:
openvi.jpg ‏78 KB

You should use the method Run VI, if you want the VI in the 'Run Mode' without actually running (like ctrl-m), I have no idea how to do that.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Difference between Simple maintanence and Export mode and Organisation plan

Hi all,
Can any one please explain the difference between Simple maintanence and Export mode and organisational plan in SAP easy access.
Thanks & Regards,
Naga

Expert Mode Infotype Maintenance: This interfaces allows you to edit individually selected objects in OM (Org Units, Positions, Jobs) via infotypes.
Expert Mode: Simple Maintenance Interface (PPOM_OLD) is used to quickly create a new Organizational Plan. As a user, you can pretty much maintain large volumes of data very easily ( i.e create several objects simultaneously), without having to go through the more "Performance Intensive" Org and Staffing interface.
In accessing the Simple Maintenance interface to create your org structure, the initial screen requires you to specify which evaluation path you want to create your org structure.
Organizational Plan: This is what provides you with a complete picture of an enterprise's environment. It comprises elements (objects like Org Units, Positions, Jobs etc) which are used as building blocks for creating an Organizational structure.
Need more information? Let me know.

Is there a way to create and edit a video in portrait mode / 9:16 in Premiere Elements 12 or 13. Playback on an iPhone in portrait position.

I'm editing iPhone app video for posting as the first screen in the Apple app store. Required size for the video is 750:1334, 9:16. I there a way to setup the initial video in portrait mode? Many posts for how to rotate a specific clip, but I need the whole video in portrait position. How to accomplish this? I'm using Windows 7 and Premiere Elements 12 and now 13.

LaurieFrick
Thanks for giving this portrait Edit area monitor shape a look.
I have Windows 7 64 bit and Windows 8.1 64 bit and have done the work using Premiere Elements 12/12.1 on Windows 7 64 bit.
Here is a step by step
Find the DSLR [email protected] file
Local Disk C\Program Files\Adobe\Adobe Premiere Elements 12\Settings\SequencePresets\NTSC\DSLR\1080p\
And, in that 1080p Folder is the DSLR 1080p30@ 29.97.sqpreset file that you seek.
1. Copy the
DSLR 1080p30@ 29.9.sqpreset fileI
and paste it to the computer desktop in a newly created folder named 1920p.
2. Open the 1920p Folder and edit the ..sqpreset file in Notepad.
To do that right click the .sqpreset, and, from the pop up, select Open With and then Notepad.
3. In the Notepad document, you are going to edit in only 2 places for now, switching 1920 and 1080 to 1080 and 1920 at the top and bottom
sections of the Notepad document.
Then go specifically File Menu/Save of the Notepad document and hit Save.
4. At this point, you have the edited.sqpreset file in the 1920p Folder on the computer desktop.
(Change the name of the edited .sqpreset file so that it = DSLR [email protected])
Move the 1920p Folder from there to add it to the 1080p Folder, the location where you found the original .sqpreset file that you edited.
Close out of there.
5. Back in the Premiere Elements 12/12.1, manually set the project preset to the new project preset
6. When you import your 1080 x 1920 9:16 video file into the project and drag it into the Timeline, you should see
Note that there is no orange line over that Timeline content, indicating that you are seeing
the best possible preview of the image.
7. As I wrote before,
But, here is the hang up. If I render the Timeline content to get the best possible preview at the Edit level, the video in the Edit area monitor
squeezes in resulting in black borders to the left and right of the video image on screen.
But, otherwise I found I had no problems editing or exporting, just had to keep away from Timeline rendering for previewing after an edit. Need to find the missing ingredient for 100%.
I will be writing this up in my blog in a more organized fashion including how I got the project preset description in Change Settings to agree with the changes. Probably I will do that in the morning.
ATR

What is difference between TEXT mode and BINARY mode?

Hi,
          What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
OPEN DATASET wl_filename FOR INPUT
                          IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET wl_filename FOR INPUT
                          IN BINARY MODE .

Hi vishnu,
1. files like .TXT files are considered to be text,
   and other files like .EXE . DOC etc are binary files.
2. In text files, after each line, there are two
   internal binary characters
one for line feed and another one for newline.
3. But, we don't have any meaning for it,
   when we view such files in notepad, for eg.
   Hence, to only get the understandable content,
   we should open such TXT files, in text mode.
(we can also open them in binary mode,
but we will get two extra characters after each line,
   and such two extra characters are meaningless
for interpreting the text)
4. In binary mode, each byte by byte is considered,
   without any meaning.
regards,
amit m.

Difference between open loop and closed loop mode when finding the index on a stepper motor axis.

I have a test system which uses a PXI-7352 motion controller with a MID-7602 stepper motor drive to position a 200 step/revolution stepper motor with an attached 1000 line encoder. The MID-7602 is configured for 64 microsteps per step, giving 12,800 microsteps and 4000 encoder counts per revolution. The system is controlled using LabView 7.1 and NI-Motion 6.13. To home the motor, I've defined a sequence in MAX which first finds the reverse limit switch and then moves forward to the encoder index pulse.
When finding its reference in open loop mode, the system its reference at the same microstep each time. When findings its reference in closed loop mode, the system finds its reference somewhere within about a 20 microstep wide range.
I hope somebody out there with more experience with this controller can describe the difference between finding the encoder index in open loop mode and finding the encoder index in closed loop mode.
Thanks,
Mark Moss

Hello Mark,
I suspect that the behavior you are experiencing has today
with the resolution difference between your encoder and your
microstepping. Let me illustrate with an
example:
Example Setup
Stepper
Motor
NI
Motion Controller
10
steps per encoder pulse (Every 10 steps the controller gets an encoder
pulse, therefore positions 0-9 all appear to be 0 to the controller)
The
system has a maximum of 3 pull in moves set
Open Loop Scenario
The
system is commanded to go to position 9.
The
controller sends out 9 pulses.
The
motor moves to position 9.
Closed Loop Scenario
The
system is commanded to go to position 9.
The
controller sends out 9 pulses.
The
motor moves to position 9.
The
controller checks its position and sees that it is still at position 0
because it has not received an encoder pulse.
Because
the controller thinks it is still at position 0, it sends another 9 pulses
as its first pull in move.
The
motor moves to position 18.
The
controller checks its position and sees that it is at position 10 because
it has only received one encoder pulse.
Because
the controller thinks it is still at position 10, it sends1 reverse pulse
as its second pull in move.
The
motor moves to position 17.
The
controller checks its position and sees that it is at position 10 because
it has only received one encoder pulse.
Because
the controller thinks it is still at position 10, it sends and additional
single reverse pulse as its third pull in move.
The
motor moves to its final position of 16.
I believe something similar is happening with your
application as it looks for the index pulse.
Because the controller does not compensate for what it perceives as
position error in open loop mode, the motor always goes to the same commanded
position. In closed loop mode, the motor
is bouncing around inside the single index encoder pulse trying to find a
certain position.
There are several recommendations I can make towards
correcting this behavior. These
recommendations are in order of effectiveness:
Setup
your system so that there are more encoder counts per revolution than
steps per revolution.
Turn
off pull-in moves by setting them to 0 in MAX.
Use an
open loop configuration.
Play
around with the pull in window in MAX.
Regards,
Luke H

I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

I would like to use Firefox with Sharepoint.
However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

Hi Guys 'n' Gals! I have a problem with my computer going into 'Display Sleep' mode and it actually goes into full sleep mode. anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never go into computer sleep

Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.

Change size and colour of leds (run mode)

I´m doing an interface with leds and I need that the user can change the colour and size of the leds while the VI is on the run mode.
This means that you run the VI and then you can change the colour and size of the led, so you can see that led with that requirements in the next sequence (flat sequence) or even in another VI. This means you save that information of the led.
I don´t know if I have explained it clearly.
Thank you

Yes it is possible. Just go for the create->property node->then choose item you want to workup. Also, if you don't know how to control just add control(right clicking the terminal) and see how it controls. Then add your own controls to a cluster.
I have still not got what I love.....
Attachments:
change_led.vi ‏11 KB

Timeline window missing button to switch between frame mode and timeline mode

I'm using Photoshop CS6 Extended.
This is what my timeline looks like now.
In tutorials they refer to a button that should be to the left of the drop menu that says "forever". The button is supposed to allow you to switch between frame mode and timeline mode.
this is what the timeline window looks like in timeline mode and with the button that allows you to switch.
I've already tried reinstalling and upgrading to CS6 extended, as some forums suggested.
Please help. Animation is the core reason that I need photoshop and without this button I'm extremely limited. Thanks.

OK. This should work. Copy and past the below script into Script Editor, save it as an AppleScript application to the Desktop. Double-click it and it should change to grayscale. Double-click it again and it'll toggle back.
tell application "System Preferences" to activate
delay 1
tell application "System Events"
tell process "System Preferences"
click the menu item "Universal Access" of the menu "View" of menu bar 1
click the radio button "Seeing" of the first tab group of window "Universal Access"
click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
end tell
end tell
tell application "System Preferences" to activate
delay 1
tell application "System Events"
tell process "System Preferences"
click the menu item "Universal Access" of the menu "View" of menu bar 1
click the radio button "Seeing" of the first tab group of window "Universal Access"
click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
end tell
end tell
tell application "System Preferences" to quit

Commutation between "Run Mode" and "Edit Mode"

Similar Messages

Maybe you are looking for