Comodo Antispam Gateway & Security Manager Walkthrough

hi all,
Michel from Comodo is hosting a short web demo of their Antispam Gateway & Security Manager.
It is scheduled for Thursday, July 9th at 11am.
I know the notice is quite short but if anybody is able to join in here is the link;
https://global.gotomeeting.com/join/214089781
-Super_J
This topic first appeared in the Spiceworks Community

Hi,
Check this post:
Solving the Gateway 20071 event
http://michelkamp.wordpress.com/2012/01/05/solving-the-gateway-20071-event/
and this: Event ID 21001 and 20057 on SCOM agents - duplicate SPN:
http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Similar answer has been provided by DKTOA Here:
https://social.technet.microsoft.com/forums/systemcenter/en-US/05019b70-73a3-4a37-993b-66b607f3c222/scom-2012-gateway-server-isses-20057-21001-20071-ids
Did it solve your problem?
Regards
Jure
Jure Labrovic | Blog

Similar Messages

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

Need security management software for OS 8.6 through 9.2

Are there any security management softwares available these days for OS 8.6 through OS 9.2? Something which lets the computer owner turn off firewire and USB is what I'm looking for. It would be nice to be able to allow only some selected USB devices, like a keyboard and a printer or scanner, and still disallow external drives or thumb flash drives, but turning off all USB would be useful on machines which don't need USB keyboards, like beige or B&W PMG3 computers or G3 iBooks.

Are there any security management softwares available these days for OS 8.6 through OS 9.2? Something which lets the computer owner turn off firewire and USB is what I'm looking for. It would be nice to be able to allow only some selected USB devices, like a keyboard and a printer or scanner, and still disallow external drives or thumb flash drives, but turning off all USB would be useful on machines which don't need USB keyboards, like beige or B&W PMG3 computers or G3 iBooks.

Rmi with security manager not working in netbeans

Hello i'm trying to use rmi but get the error java.security.AccessControlException: access denied (java.net.SocketPermission 127.0.0.1:1099 connect,resolve) when i run it in netbeans. here is my code
public static void main(String[] args) {
        if (System.getSecurityManager() == null) {
            System.setSecurityManager(new SecurityManager());
        try {
            String name = "Compute";
            Compute engine = new ComputeEngine();
            Compute stub =
                (Compute) UnicastRemoteObject.exportObject(engine, 0);
            Registry registry = LocateRegistry.getRegistry();
            registry.rebind(name, stub);
            System.out.println("ComputeEngine bound");
        } catch (Exception e) {
            System.err.println("ComputeEngine exception:");
            e.printStackTrace();
    }It works if i don't have a security manager and it works with a security manager if i don't use netbeans to run it and use the command line. i need to use a secuirty manager because the client code is running in eclipse and it moans that there is no security manager if i run it without one
this is the error i get when running with no security manager
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: takenoteremote.Compute (no security manager: RMI class loader disabled)
Please help

I have sort of got it to work, i took out the security manager and used the code base parameter on the command line, and put my interface into a jar file. I can only get it to work though on the command line, if i run it in netbeans it doesn't find the class in the jar file it needs.
Any ideas?

Windows 2008 r2 Cluster not starting - "unable to create security manager worker queues"

Hello, following a power outage, we got a serious cluster error preventing the start of the cluster.
We are trying to interpret the only four lines the cluster.log generates :
00000330.000016cc::2014/09/26-10:44:06.348 ERR   [WTQ] bogus file creation failed, 2
00000330.000016cc::2014/09/26-10:44:06.348 ERR   [WTQ] bogus file creation failed, 2
00000330.000016cc::2014/09/26-10:44:06.348 ERR   [CS] Unable to create SecurityManager worker queues, 2
00000330.000016cc::2014/09/26-10:44:06.363 ERR   Error 6
AND if starting clussvc manually :
Got ERROR_FILE_NOT_FOUND(2)' because of 'Error while creating the Security Manag
er's Thread Pool' in
    000007fe:fd69940d( ERROR_MOD_NOT_FOUND(126) )
    00000000:001ff190( ERROR_MOD_NOT_FOUND(126) )
We suspect a DLL problem (because of mod not found), but we are unable to find the ones involved even with process monitor.
clusdb hive seems ok.
The situation is serious, can anybody help, please ?

Hi RodV,
This error usually caused by cluster service fails to open a
handle to the \NUL device, Device manager shows the device instance in error state.
Please check whether the following register value still exist, if not please backup your current registry then add the it.
HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\ENUM\ROOT\LEGACY_NULL\0000\CONTROL
ActiveService REG_SZ Null
I am glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with Advanced Security Manager

Hi
I am using the advanced security manager to migrate security from Essbase 7 server to Essbase 11 server. The users who are externally authenticated on essbase 7 server are under native security mode on the Essbase 11 server after security import.Does the Advanced security manager put all the users (whether they are externally authenticated or under native security mode) in native security mode after import?
Please help

Hello 831221
In version 11 "native" means that the users are stored in OpenLDAP (once Essbase was externalized).
You would only be able to create "external" users if the Shared Services have been connected to an external User Source (e.g. MSAD) prior to
importing the users.
best regards
.T

Security manager not used with JNDI ?!

Hi,
I have a simple stand-alone java app that does a JNDI lookup
and subsequent method invocation on the returned session bean.
I never explicitly install a security manager and am wondering
why there are no security problems getting the bean proxy
and any subsequent code downloads from the WebLogic server.
Seems like this would never work under under pure RMI, so
what's going on in this case?
Thanks, Garry

Hi,
According to the screenshot, it seems like compatibility problem, What's the type of your system?
In addition, you can refer to the link below to view its compatibility list.
http://gallery.technet.microsoft.com/LocalGPOmsi-Excellent-MS-2593b2eb
Roger Lu
TechNet Community Support

Saving Password for a pdf file in HP Client Security Manager

Hello,
I want to save the password for a pdf file in the Password Manager of the HP Client Security Manager Software but the symbol for the entry of the password is not appearing on the top right of the screen. If I use the registered fingerprint a dialog opens where the Client Security Manager asks which account it should use to login. But i can't add a password for the file. The login for websites is perfectly fine.
Do you have any idea how to fix that?
Is there a way to manually enter password for files?
Thanks in advance.

Thanks for the information.
Suggest you to try uninstall and re-install the latest version which is - 8.3.3.1762. The direct link is:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405363&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_129972_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
If this does not fix, then suggest you to log a call with technical support.
Please do post any progress on this.

Datagram socket and security manager

I have subclassed the security manager to implement my own network security rules.
However when the receive(datagramPacket) method is called by the my datagram socket, the host parameter passed to the checkAccept(host, port) method does not belong to the sender of the packet(to be received).
How then can malicious addresses be blocked by the security manager, as suggested by the comments in the source code of DatagramSocket.
Any help is greatly appreciated. Thank you in advance.

However when the receive(datagramPacket) method is
called by the my datagram socket, the host parameter
passed to the checkAccept(host, port) method does
not belong to the sender of the packet(to be
received).It should. What are you getting instead?

Security Manager/Access problem

(WWC-00000)
An unexpected error has occurred in portlet instances: wwpob_api_portlet_inst.create_inst (WWC-44846)
The following error occurred during the call to Web provider: java.lang.NullPointerException
at oracle.portal.provider.v2.security.URLSecurityManager.hasAccess(Unknown Source)
at oracle.portal.provider.v2.DefaultPortletDefinition.hasAccess(Unknown Source)
at oracle.portal.provider.v2.ProviderInstance.getPortletDefinition(Unknown Source)
at oracle.portal.provider.v2.ProviderInstance.getPortletInstance(Unknown Source)
at oracle.portal.provider.v2.ProviderInstance.getPortletInstance(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.registerPortlet(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Removing the provider.xml security manager setting will do away with this problem.
Versions being used: Portal 9.0.2 and PDK september.

I have checked with PDK September samples related to Security Manager/Access and they are working fine. Please lets know for which PDK sample gives this error.

Access to IPortalComponentRequest in custom security manager

Hi All,
I am implementing a custom security manager. For my requirements, I need IPortalComponentRequest object in the security manager class. Can anyone give me a clue to get the request object in security manager implementation.
Regards,
Yoga

Hi Romano,
I tried this. Its returning mysapsso2 cookie and authentication_schema cookie. But not retuning any custom cookies added to the response from any other application.
What I have tried to achieve is:
1. When a user login and authentication suceeds, I will add a custom cookie to the response.
2. Get the custom cookie added in the security manager class and do manipulations to check whether the user is authenticated.
Using the method you have suggested, I was not able to get any custom cookies added in other applications.
I tried the code using resource context(resource context obtained form IUser) as suggested in other threads,
HttpServletRequest request = (HttpServletRequest) resourceContext.getObjectValue("http://sapportals.com/xmlns/cm/httpservletrequest");
But this API returns null.
Any way to achieve?
Regards
Yoga

Using the Security Manager to restrict access to a single package

After reading up on the Security Manager, the package.access property and the use of the [accessClassInPackage RuntimePermission|http://java.sun.com/javase/6/docs/technotes/guides/security/permissions.html#RuntimePermission] , it seemed to me that it would possible to set up the following: I have a security-sensitive code base packaged in a jar, and I want to make sure that only one client code base that I specify is permitted to access it. The idea here is to prevent malicious code from executing anything in the sensitive code base; the sensitive code is only accessible to one client that I name in a security policy file. Perhaps rather foolishly, I advised a client to consider this before testing out a sample myself, because much to my surprise, it appears to me that it isn't possible to get the Security Manager to do this at all. Am I missing something? I'm a bit startled by this conclusion -- it seems like such an obvious use for the Security Manager, I'm hard-pressed to be believe that it can't be done, and more inclined to suspect that I'm going about it wrong.
Here's what I thought I could do: set up the package.access property so that it denies access to any package; then in the policy file, grant the RuntimePermission/accessClassInPackage to the client code base that is permitted to access the sensitive code.
Of course, you wouldn't want the package.access property to exclude all packages in the global java.security file, because then no code could be accessed at all. It would be necessary to use the trick of resetting the package.access property within the code, as [illustrated in the secure coding guidelines|http://java.sun.com/security/seccodeguide.html#1-1a] .
But the problem lies in the idea of "use the package.access property to deny access to +any+ package". There doesn't seem to be any way to use wildcards or the like with the property -- it has to specifically name packages (or package prefixes) to which access is forbidden. It wouldn't do to try to name the packages to which I'm trying to prevent access, since we're trying to prevent access from malicious code -- the attacker could just choose package names that aren't on the list. I'd really need to say that access is denied to all packages, except for those in the permitted code base, but the security mechanisms for package access don't seem to allow that.
Moreover, the trick of changing the value of package.access can't be done within the client code -- otherwise, the attacker client would just set the property to his own purposes. But it can't really be done within the sensitive package either, because the whole idea is to prevent access to that package, and by the time it's busy setting the property, it's already too late, because the package has to have been accessed by a client to get there at all.
It seems to me that this a symptom of something I've never really understood about the design of the Security Manager -- you can grant permissions to specific code bases, but you can't revoke permissions from specific code bases, let alone all code bases. What I want to do here is grant access permission to one specific code base and revoke it from all others. There doesn't seem to be any way to express that with the mechanisms of the Security Manager.
The more I look at it, the more it seems that there's just no way to use the Security Manager this way -- set up package access so that a specific code base can only be accessed by one specific client code base. There are surely other ways to get the effect that I'm looking for, but as far as I can tell, none of them involve restricting package access (for example: define a custom permission, grant it only to the permitted client. and check against that permission within the sensitive code base; meaning that the sensitive code has to be accessible to anyone in the first place). This conclusion really surprises me (not to mention my bit of embarrassment with the client); wouldn't this be precisely the sort of thing the Security Manager ought to be good for?

You're looking at this back to front. The security policy file is there for the client to decide how much access he is going to give this application, not for to application to restrict who can use it. If you want to control what used to be called 'state orientation' you can do that directly by looking down the stack trace inside your code.

Security manager & mention "Java Applet Window"

A simple program that displays a frame with one button in it.
The frame displays, no problem.
When a security manager is added "System.setSecurityManager(new SecurityManager());"
and the program is run again a "status bar" is added at the bottom of the frame
mentioning "Java Applet Window".
Why is that, and can it be suppressed ? (I am working in JDK 1.4)
Any tip greatly appreciated

I was dealing with this myself and just discovered that the adding the following line to my security policy removed the message:
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";

How to define a flexfiled in security manager

hi guys ,
i would like to use getInfo subtitution of ODI.But I could not find out where to define the variable .
eg: ı wanna get the driver and url addresses from flexfield variable
'<%=odiRef.getInfo("DEST_JAVA_URL")%>', <%=odiRef.getInfo("SRC_JAVA_DRIVER")%>
but i don't know how to define the variables DEST_JAVA_URL and SRC_JAVA_DRIVER in security manager.
pls help

Hi,
'mgcp call-agent [ccm1] service-type mgcp version 0.1' command you have the primary server;
'ccm-manager redundant-host [ccm2] [ccm3]' for primary and secondary backup.
But you will need to run 'no mgcp','mgcp' for the changes to take effect.
Regards,
=====================
Please rate useful posts

Start Tomcat 5.5 with Security Manager

Recently, i have installed Tomcat version 5.5.8 but i have problem to start tomcat with a Securiy manager.
For Tomcat version 4.xx we could start Tomcat with SecurityManager by using the "-security" option at "%CATALINA_HOME%\bin\startup.bat" after configured the catalina.policy file.
But i couldn't do so at Tomcat 5.5.8. Any idea? Many Thanks.

Start it yourself with
java -Dcatalina.home=$CATALINA_HOME -Djava.security.manager -Djava.security.policy=="your.policy" -cp your.classpath org.apache.catalina.startup.Bootstrap
Cheers,
Arnaud

Comodo Antispam Gateway & Security Manager Walkthrough

Similar Messages

Maybe you are looking for