Comp.wrks++ still wont install after sp3 patch applied

I am attempting to install measurement studion 1 component worksC++ on a pc running windows 2003 server x64
MS visual studion sp5 is installed.
The SP3 patch has been applied and I have verified the registry text has been added.
the machine has bee rebooted after every step.
The NI install program still reports that Component works requires >sp3 and quits.
How can I complete the installation?

Hi Ebrinton,
Please refer to the following KB for this issue:
Why Does Measurement Studio for Visual C++ Not Install with Visual Studio Service Pack 4 or Above?
Cheers,
David Goldberg
Applications Engineer
Message Edited by AEDavidG on 09-12-2006 12:35 PM
Cheers,
David Goldberg
National Instruments
Applications Engineer

Similar Messages

  • Still wont load after buying firewire

    My 60gig ipod still wont mount the ipod software after buying and installing the firewire card. No clue what to do now.

    Have you run the iPod software updater to restore your iPod?
    Restore the iPod

  • Photoshop wont install after purchase

    I recently bought Photoshop cc, but even after multiple attempts the program  wont install. When investigating what went wrong in trouble shooter the errors that came up were:
    Third party payload installer vcredist_64
    and
    Failed to repair Microsoft Visual C++ 2008 Redistributable Package
    Unfortunately I am still at a loss as what to do to fix these problems. Some instruction would be greatly appreciated.

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • HT4528 I upgraded to an iphone 4s yesterday and it still wont activate after I reset it. What do i do?

    I upgraded to an Iphone 4s from an iphone 4 and when i reset it last night it wasnt able to activate. Ive tried numerous times and activate it on multiple wifis and it still wont work. My verizon store said the phone was fine but the apple server is busy so i should just keep trying. What do i do!!! your help is needed! i tried connecting it to itunes and it will not work either.
    thanks
    Demi

    Take your phone back to the store where you got it. Tell them if they can't get it activated, you want your money back. Then purchase a new iPhone 4S.

  • Cs5.5 master collection wont install After Effects or Premier

    Just upgraded from CS4 to CS5.5 and installation errors on After effects and Premier. I'm running windows 7 64 bit pro service pack 1,Duel x5650 xeons,  24 gigs of memory, 250 gb ssd. Before installing CS5 I uninstalled cs4. After the first installation error I unistalled cs5, ran the AdobeCreativeSuiteCleanerTool.exe, and removed all the adobe folders from my program files and program files(x86) folders. I've spent the last 4 hours searching for a solution, no luck yet though. I don't have any user account controls set. I think it's a font permision problem but don't know. I called adobe tech support, but no luck. Any help would be apprecieated. the following is the error code. 
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 37 error(s), 29 warning(s)
    WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    ----------- Payload: {7F9C94CD-0BAC-4F8F-8990-6A5886F4D550} Required Common Fonts Installation x64 1.0.0.0 -----------
    WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\KozGoPro-Heavy.otf'(Seq 16)
    ERROR: DF012: Unable to find file(Seq 16)
    ERROR: Error code: 2(Seq 16)
    ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\KozGoPro-Heavy.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 16)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 16)
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.4E99CCP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Master Collection CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {E39A5ABD-516B-46F9-A042-694BBA6A4E08} Recommended Common Fonts Installation 1.0.0.0 -----------
    WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\ChaparralPro-Bold.otf'(Seq 20)
    ERROR: DF012: Unable to find file(Seq 20)
    ERROR: Error code: 2(Seq 20)
    ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\ChaparralPro-Bold.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 20)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 20)
    ----------- Payload: {CBDD7465-CE11-4A58-9497-C370B65923F1} Required Common Fonts Installation 1.0.0.0 -----------
    WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\KozGoPro-Heavy.otf'(Seq 15)
    ERROR: DF012: Unable to find file(Seq 15)
    ERROR: Error code: 2(Seq 15)
    ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\KozGoPro-Heavy.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 15)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 15)
    ----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\kellyc\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\kellyc\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ----------- Payload: {11C0657F-2BD4-4CBC-87F3-9455DC91886E} Recommended Common Fonts Installation x64 1.0.0.0 -----------
    WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\ChaparralPro-Bold.otf'(Seq 21)
    ERROR: DF012: Unable to find file(Seq 21)
    ERROR: Error code: 2(Seq 21)
    ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\ChaparralPro-Bold.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 21)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 21)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {067E43CD-3E9C-44BA-89FA-EDE7461BC22B} AIR for Apple iOS support (FB) 2.6.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {7745F18B-FD8A-4011-BE16-588900C503D0} Adobe Flash Fonts1 1.0.0.0 -----------
    ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp521125891" Error 5 Access is denied.(Seq 2)
    ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 2)
    ----------- Payload: {7CF76BDA-73EA-4C46-A59D-FC3142D83E65} Adobe OnLocation CS5.1 Third Party Content Wrapper 5.1.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {301D39AF-43B1-445B-88CF-D78584200322} Adobe WinSoft Linguistics Plugin CS5.5 1.2.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\CS5\payloads\AdobeContribute6.1-FFPlugin\OEM(Seq 32)
    ----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\CS5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
    ----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\CS5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
    ----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\CS5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
    ----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\CS5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
    ----------- Payload: {DDBDE7B0-6FC4-40B1-B673-66EEE8CB60CF} Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack 15.1.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {F9F276DA-9EC6-492C-AF58-F27C5EC19D66} Adobe Photoshop CS5.1 English Language Pack_x64_AdobePhotoshop12-en_US_x64 12.1.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\CS5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Premiere Pro CS5.5 Support: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation x64: Install failed
    ERROR: DW050:  - AdobeMotionPicture CS5.5: Install failed
    ERROR: DW050:  - Adobe After Effects CS5.5 Support: Install failed
    ERROR: DW050:  - Required Common Fonts Installation x64: Install failed
    ERROR: DW050:  - Adobe Story: Install failed
    ERROR: DW050:  - Adobe After Effects CS5.5 Presets: Install failed
    ERROR: DW050:  - Adobe After Effects CS5.5 Third Party Content Wrapper: Install failed
    ERROR: DW050:  - Adobe After Effects CS5.5_AdobeAfterEffects10.5en_USLanguagePack: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesAE CS5.5: Install failed
    ERROR: DW050:  - AmericanEnglishSpeechAnalysisModels: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS5.5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe After Effects CS5.5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Premiere Pro CS5.5_AdobePremierePro5.5en_USLanguagePack: Install failed

    Thanks. I tried the all the steps in the link you provided. Plus a few others from adobe support, I spent about 4 ½ hours on the phone with them over the past 2 days. I reinstalled all the Microsoft payloads, updated my video drivers, admin privileges, closed all my services and startups, uninstalled adobe air, flash player, deleted a few fonts from my system, although that was a pain because I had to go into safe mode to delete them, and I lost track off the rest. I haven’t had any troubles installing any other software, including CS4.
    Here is the new error when I try to install either after effects or Premier
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 6 error(s), 4 warning(s)
    WARNING: DW031: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 has been updated and has been selected for repair. The patch {32841ECE-EC28-42CD-A4DD-6CE832A7EA8D} Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe Photoshop CS5.1 Core depends on Required Common Fonts Installation to be installed.
    ERROR: DW020:  - Adobe Illustrator CS5.1 depends on Required Common Fonts Installation to be installed.
    ERROR: DW020:  - Adobe InDesign CS5.5 Application Base Files depends on Required Common Fonts Installation to be installed.
    ERROR: DW020:  - Adobe Fireworks CS5.1 depends on Required Common Fonts Installation to be installed.
    ERROR: DW020:  - Adobe Encore CS5.1 depends on Required Common Fonts Installation to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

  • J2EE on Windows App server wont start after JSPM patching

    Hi,
    I've patched an ECC6 system on DB2 V5R4 to SP16 level on ABAP side, and Enhancement pack 3, and then did an update to JSPM and installed new SP16 levels of the Java components.
    Now my Windows App server starts only the ABAP Work processes, not the J2EE side. I get a yellow light and the message
    J2EE Status info unavailable.
    On the Windows work directory for Dialog instance D00, I see that the dev_server0 has only messages about the last shutdown 2 days ago.
    The dev_jcontrol has errors in it abot Unknown property and
    JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
    see below.
    Any ideas?
    regards
    Michael.
    trc file: "U:\usr\sap\WFD\D00\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 2308
    system name : WFD
    system nr.  : 00
    started at  : Thu Sep 25 15:46:00 2008
    arguments       :
           arg[00] : U:\usr\sap\WFD\D00\exe\jcontrol.EXE
           arg[01] : pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
           arg[02] : -DSAPSTART=1
           arg[03] : -DCONNECT_PORT=64990
           arg[04] : -DSAPSYSTEM=00
           arg[05] : -DSAPSYSTEMNAME=WFD
           arg[06] : -DSAPMYNAME=dfbhl6_WFD_00
           arg[07] : -DSAPPROFILE=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
           arg[08] : -DFRFC_FALLBACK=ON
           arg[09] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2040] Thu Sep 25 15:46:00 2008
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
    -> ms host    : sapdev
    -> ms port    : 3941
    -> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Used property files
    -> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapdev
    -> ms port    : 3941
    -> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Bootstrap nodes
    -> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID2623900  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID2623950  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    [Thr 2040] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 3504] JControlDPMessageProxy: Thread 3504 started as handler thread for R/3 dispatcher messages.
    [Thr 2040] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 2040] JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.compiler=jitc -Dos400.run.mode=jitc -Dos400.disable.explicit.gc -Dos400.define.class.cache.file=/usr/sap/WFD/SYS/j2ee/cache/QDefineClassCache.jar -Dos400.define.class.cache.hours=9999 -Dos400.define.class.cache.maxpgms=40000 -Djava.ext.dirs=/usr/sap/WFD/SYS/j2ee/ext
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> root path          : U:\usr\sap\WFD\D00\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : U:\usr\sap\WFD\D00\exe\jstartup.jar;U:\usr\sap\WFD\D00\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0026239
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = U:\usr\sap\WFD\D00\exe\jlaunch.exe
    -> arg[00] = U:\usr\sap\WFD\D00\exe\jlaunch.exe
    -> arg[01] = pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[02] = -DSAPINFO=WFD_00_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2308
    -> arg[06] = -nodeName=bootstrap
    -> arg[07] = -jvmOutFile=U:\usr\sap\WFD\D00\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=U:\usr\sap\WFD\D00\work\std_bootstrap.out
    -> arg[09] = -locOutFile=U:\usr\sap\WFD\D00\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[12] = -DSAPSTART=1
    -> arg[13] = -DCONNECT_PORT=4556
    -> arg[14] = -DSAPSYSTEM=00
    -> arg[15] = -DSAPSYSTEMNAME=WFD
    -> arg[16] = -DSAPMYNAME=dfbhl6_WFD_00
    -> arg[17] = -DSAPPROFILE=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[18] = -DFRFC_FALLBACK=ON
    -> arg[19] = -DFRFC_FALLBACK_HOST=localhost
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;U:\usr\sap\APD\D31\exe;
    sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
    sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;U:\usr\sap\WFD\D00\j2ee\os_libs;U:\usr\sap\APD\D31\exe;
    sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
    sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
    [Thr 2040] Thu Sep 25 15:46:26 2008
    [Thr 2040] JControlExecuteBootstrap: read instance values after global bootstrap
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
    -> ms host    : sapdev
    -> ms port    : 3941
    -> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    [Thr 2040] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapdev
    -> ms port    : 3941
    -> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Bootstrap nodes
    -> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID2623900  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID2623950  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    [Thr 2040] JControlCheckRunMode: run mode of the instance = safe
    [Thr 2040] Instance is disabled -> terminate.
    [Thr 2040] JControlCloseProgram: started (exitcode = -11113)
    [Thr 2040] JControlCloseProgram: good bye... (exitcode = -11113)

    Thanks Kaushal,
    I hadn't done any changes to UME, but I have got a JSPM support package (EP-PSERV SP16) in status of ERROR that seems to be at the bottom of the problem.
    Apparently, JSPM is not able to cope with any flavour of IBM DB2 (Windows, AIX, or i) at a point in this support package.  There is a note 1156313 and it matches the error which is in the  sdm log file:
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 db4-Info:  existsData() returns true.
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Action: CONVERT
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Action: CONVERT
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Table has to be converted
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Table has to be converted
    Sep 25, 2008 4:51:32 PM  Info:
    Sep 25, 2008 4:51:32 PM  Info: E R R O R ******* (DbModificationManager)
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Error:  Table WCR_USERSTAT: Conversion currently not possible
    Sep 25, 2008 4:51:32 PM  Info:
    Sep 25, 2008 4:51:32 PM  Info: E R R O R ******* (DbModificationManager)
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Error:  Table WCR_USERSTAT: Conversion currently not possible
    Meanwhile, the commands in the note don't work as the DB   (Owner )  *ALL
    PUBLIC    *EXCLUDE
    regards
    Michael

  • Selling 3GS wondered if iOS4 will still be installed after reset/wipe

    I have just installed iOS4 on my 3GS (absolutely love the iOS4).
    I will be selling my 3GS on to a friend shortly and getting the iPhone 4, and prior to this will be resetting/wiping the 3GS (bascially putting it back to the condition it was when it left the factory)
    When I reset/wipe etc my 3GS when I sell it, and my friend then reactivates the 3GS on his computer/iTunes. After the activation, would iOS4 be still installed on the 3GS, or would it be back to the software version that was on it when it left the factory.
    Thanks in advance

    Thanks for the help, its much appreciated.
    I was hoping it would remain on after the reset wipe.

  • Client wont install after forced update failed

    Running OSX 10.8.3 (as well as when 10.8.2). Company uses the AnyConnect Client, using chrome, Its never installed via the web install under java, always used the download .dmg package.
    Client was installed and working. Forced to update to 3.1.02026 from work. The update install failed, as you are probally aware, OSX failed installs dont give much information, client installs, gets to registering componenets, and then says installation failed. The application is installed in /Applications, but when it is ran, no components loaded. Quiting application.
    I have tried to use the uninstaller, as well as Appclean and one other "osx uninstaller" to try to remove files. I have created a new user account and tried to install there, same result.
    Can you provide a manual uninstall that makes sure I remove ALL files so I can attempt to install it again, when I run the installer in a virtual OSX install it installs fine, so your installer cant handle something on my machine and is bombing out. I have made sure permissions are good/fixed, as well as manually clearng caches and other "cleeanup apps" -> Onxy, but something is still not working.
    If there is a log file somewhere that would be of use, please let me know.
    Thanks in advance.

    I have finally found a solution!!! Yea! (It was in an obscure hard to find support article from apple only found after googling error messages, though why it wouldn't come up in an apple search is silly to me) So... you can not just uninstall Itunes because the problem lies within the support software that comes with itunes.
    You must uninstall IN THIS ORDER (per Apple)
    1. Itunes
    2. Apple Software Update
    3. Apple Mobile Device Support
    4. Bonjour
    5. Apple Application Support
    6. Icloud
    Then you must restart your computer (I got an error message that some files could not be opened because aspects were missing) I then downloaded the most current Itunes from the computer and the problem was gone. All files came up with the new download. Program opened with no issue.
    Hope this helps the rest of you having this issue.

  • Closed internet explorer and still wont install

    When installing it ask me to close internet explorer. I do so but it still acts like it is open and says it needs to be closed again.

    See How to close Internet Explorer and other programs running on Windows?

  • Upgrade from 10.7.1 to 10.7.4 wont install after download. Please help!

    I'm using MacBook Pro 13-inch, early 2011 running 10.7.1. I want to upgrade to 10.7.4 but the system discarded the upgrade after I successfully downloaded it. Please help!

    You need the Combo Update to go from 10.7.1 to 10.7.4.

  • AppTRK wont install after firmware upgrade (N95)

    Hello i have recelntly updated to the newest firmware and im having trouble whilst installing apptrk on the mobile i transfer it to the phone and when i start the installation i get to the part where you choose where to install the app but when i choose either the phone mem or the memory card i get an error saying that the component is built in and i need the trk app to be installed in order to install some other aplications that i also need very much
    Thanks in advance...

    You can't do anything.
    The new firmware stops these sorts of programs working.
    Mainly because they can be used to install illegal applications etc.
    There is no way of downgrading your firmware either before you ask. 

  • Liquify filter in photoshop cc still wont work after full reinstall

    halp.
    macbook pro running osx 10.8.4
    8 gig ram.
    I've uninstalled all adobe software, used the adobe cleaner, reinstalled the applications manager. nothing works.

    When you say nothing works, what exactly does that mean? Does the Liquify dialog come up? Can you see a preview? Does the filter crash Photoshop? Had it been working before? Did it stop working after a Photoshop or OS upgrade? Also posting your Photoshop system info would help to figure this out.

  • Downloading the new Edge wont install after download.

    I'm trying to download the new version of Edge off the cloud downloader.  It downloads fine, but when it goes to install i get an error listed below.  Every other program seems to be working just fine, and there is no connections being blocked by my firewall.
    Exit Code: 7
    Please see specific errors and warnings below for troubleshooting. For example,  WARNING: DW020 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 0 error(s), 3 warning(s)
    WARNING: DW020: {E705A411-1622-40E3-902F-3109F34CCE60} Adobe Edge Animate 1.0.0.0 conflicts with: {72CC24A1-A3A8-49CE-B1FF-0045356483B2} Adobe Edge Animate Preview 1.0.0.0
    Please uninstall these products, restart your computer and then run this installer again.
    WARNING: DW020: NOTE: Cannot set action to the payload {E705A411-1622-40E3-902F-3109F34CCE60} Adobe Edge Animate 1.0.0.0 as conflicting payload is installed.
    WARNING: DW020: {E705A411-1622-40E3-902F-3109F34CCE60} Adobe Edge Animate 1.0.0.0 conflicts with: {72CC24A1-A3A8-49CE-B1FF-0045356483B2} Adobe Edge Animate Preview 1.0.0.0
    Please uninstall these products, restart your computer and then run this installer again.

    I had the same problem, but I just moved Edge preview to the trash instead of uninstalling it via the Adobe uninstall.
    Restored Edge from time machine, uninstalled the right way and was able to install Edge Animate.

  • FlashPlayer 10 Still wont install properly

    I don't know how to act calm about this, now a really great
    deal of our users/customers have been visitng sites that require
    FlashPlayer 10+, now theyre just lost, with no Flash at all.
    We need to get Adobe to FIX THAT ASAP!
    What can be done?

    Hi squadjot-
    I have never seen a website that requires Flashplayer 10+.
    There's still a few there that haven't been updated to
    accept/recognize FP10 and default to "You must have the latest
    version of Flashplayer" and the link takes you to FP10. Which, of
    course, doesn't help at all.....
    Most sites that have updated to work with FP10 will still
    work OK with the latest v9.
    But: there's always some exceptions/weirdness.
    Can you provide a link?
    Thanks.

  • Green and Orange Flashing lights - ipod still wont work after Reset Utility

    I bought my daughter an ipod shuffle 1st gen last year. It stopped working, did everything I was suppose to do, sent it back to Apple, they sent me a new one. Now the stupid thing is flashing green and orange lights at me! I've tried restoring it with Reset Utility, but they are still blinking at me. This is supposed to be a newly refurbished ipod, I only recieved it today, so by rights it should be working...am I doing something wrong? It is charging, it is recognised in my computer but not in itunes. What is going on? Can anybody help...this is so frustrating.
      Windows XP Pro  
      Windows XP Pro  

    I bought my daughter an ipod shuffle 1st gen last
    year. It stopped working, did everything I was
    suppose to do, sent it back to Apple, they sent me a
    new one. Now the stupid thing is flashing green and
    orange lights at me! I've tried restoring it with
    Reset Utility, but they are still blinking at me.
    This is supposed to be a newly refurbished ipod, I
    only recieved it today, so by rights it should be
    working...am I doing something wrong? It is
    charging, it is recognised in my computer but not in
    itunes. What is going on? Can anybody help...this is
    so frustrating.
    Hold on... Alternating green and orange for 2 seconds means there's no playable music on it. Alternating green and TWO orange for 10 seconds means that it has to be restored. WHICH light pattern are you referring to?
    What do you mean it's not recognised in iTunes? Does it NOT show up in the left most (Sources) panel?

Maybe you are looking for