Compact 7 Power Management: When does state change back to ON from User or System Idle?

OS Design: Compact 7
Headless system
BSP: AM335x (ARM7)
Using Full Power Management Catalog component.
Run Telnet to interact with device and through serial terminal app.
With monitoring app can see transitions from ON to UserIdle to SystemIdle due to Activity timeouts.
Can manually set mode back to UserIdle or ON.
But never see transitions back when loading system with software or network activity.
eg. 1 Create a loop forever app with two internal forloop (1000 loops each): Runthis on numerous telnet sessions<
         Can see system degrade as responsiveness decreases.
eg 2. Continuously ping another system or from another system  (network load)
So what is need to trigger a PM state transition back up the tree?

Thanks Dave for your reply.
That's what I am looking at doing.
But I'd like to see the inbuilt functionality working first. I can see the transitions down the stack due to Activity timeouts, but I would have thought the reverse would occur when the system does something.
I do have an app that "touches" the PM and thus bring the system back to ON.
Cheers David
DJaus Snr SW Dev (Embedded Systems and .NET)

Similar Messages

  • When the state change, my StyleableTextField html formatting is lost

    Hello,
    When the state change, my StyleableTextField html formatting is lost (mobile project)
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
              xmlns:s="library://ns.adobe.com/flex/spark"
              addedToStage="ats(event)">
              <fx:Script>
                        <![CDATA[
                        import spark.components.supportClasses.StyleableTextField;
                        protected function ats(event:Event):void
                                  StyleableTextField(txt.textDisplay).htmlText="<i>test</i>";
                        public function ok(e:Event):void{
                                  currentState = "state2";
                        ]]>
              </fx:Script>
              <s:states>
                        <s:State name="initialState" />
                        <s:State name="state2" />
              </s:states>
              <s:VGroup>
                        <s:TextArea width="100%" id="txt" includeIn="initialState, state2" skinClass="spark.skins.mobile.TextAreaSkin"/>
                        <s:Button label="add" click="ok(event);" includeIn="initialState, state2"/>
                        <s:TextArea width="100%" text="state2" includeIn="state2"/>
              </s:VGroup>
    </s:Application>
    Thanks

    How are you doing this?
    The text area of a web app has HTML encoding and is all fine.
    If you make a multiline custom text field the encoding remains.
    You need to provide a bit more information because the above do keep their encoding.

  • When doing goods receipt and the movement from QA to unrestricted use there

    Dear all,
    when doing goods receipt and the movement from QA to unrestricted use there is an yellow error message
    Error in EXIT_ SAPMM07_004 : Object 10462311E06/52,Char."LOBM_UDCODE,Value 01 A0,error"VALUE_NOT_FOUND"
    Inspection Lot : 10000283512
    System Status : UD ICCO SPRQ

    Hi,
    Did you use the follow up action in the UD code selection? It looks from the error that program is unable to find the UD code.
    Kindly check the configurations in QM and see that everything is working fine?
    Alternatively, if you are using the follow up action, then remove that first. Do the GR using MIGO -- this will create the inspection lot. Confirm the inspection using QA11 by entering the UD code for acceptance. Thereafter the the stock will rest in QI status. Use MB1B and perform the transfer posting with movement 321 to bring the stock to unrestricted use.
    Regards,
    Sushant

  • How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

    How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
    Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive.  I can't seem to get it to do this.

    This W7 was purchased for using Fusion, as others did - per reviews from amazon.  The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work.  Apparently my setup doesn't work. 
    Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
    BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years.  What do you use for email and calendar?
    Wow, sounds like another reason to not use MS Windows.
    Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
    As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times. 
    Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
    Switch 101
    Mac 101
    Find Out How Video tutorials

  • GP Card manager Key does not changed..

    hi all..
    I have a jcop card and I want to change the GP Caard Manager Key from Static 40~4F to 30~3F.
    Now the key version is 01.
    Like below..I succeed putkey cmd, but the key does not changed..
    What is the probem???
    [Power On - Gemplus USB Smart Card Reader 0]
    ATR : 3B 69 00 00 4A 43 4F 50 33 31 56 32 32
    [APDU - Gemplus USB Smart Card Reader 0]
    00 A4 04 00 08 A0 00 00 00 03 00 00 00 << 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65
    01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A
    86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B
    02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64
    0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09
    2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01
    04 01 2A 02 6E 01 02 90 00
    172ms
    [APDU - Gemplus USB Smart Card Reader 0]
    80 50 00 00 08 00 00 00 00 00 00 00 00 << 00 00 93 02 04 37 90 91 54 50 01 02 00 2C BE 39
    5E A5 07 55 D3 74 FF 65 DA B6 1C 0E 90 00
    125ms
    [APDU - Gemplus USB Smart Card Reader 0]
    84 82 00 00 10 78 E9 4A 72 8C 8A 58 C2 9C 60 70 A3 C9 F2 93 48
    << 90 00
    78ms
    [APDU - Gemplus USB Smart Card Reader 0]
    80 D8 01 81 43 00 80 10 D3 DD 37 F4 45 C0 EB C8 20 A9 7F 43 FB D6 61 A8 03 B7 3D 56 80 10 D3 DD
    37 F4 45 C0 EB C8 20 A9 7F 43 FB D6 61 A8 03 B7
    3D 56 80 10 D3 DD 37 F4 45 C0 EB C8 20 A9 7F 43
    FB D6 61 A8 03 B7 3D 56
    << 01 B7 3D 56 B7 3D 56 B7 3D 56 90 00
    203ms

    The only way that OneKey would be restored in your situation is by having Lenovo reimage your hard drive. Assuming they will do it under warranty. Once you repartition drive "C", you lose all functionality of OneKey partition. I was going to suggest that you extract the recovery image from the hidden partition but even that will be useless because the image was set up for the original partition setup.
    An alternative, is to use an OEM Windows XP [Greek] to install with the COA on the netbook, install the drivers and software that was preinstalled [from Lenovo] and create a recovery cd/dvd using OneKey 6.0 and VirtualCD.
    ***VirtualCD is a program that allows you to burn CDs and DVDs using a virtual CD/DVD writer.
    Message Edited by ortegaluis on 01-15-2009 09:13 AM
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • Best practice power setting when doing a Site Survey for VOIP

    Hi Team,
    Can someone please confirm or correct me.  When doing a Wireless Active Site Survey for Cisco VOIP, I should be setting the Test AP to local power of 14, which is 25mW?  Is this correct, or should it be another value?  I asked the customer for the power of their weakest client and they do not know, but they claim there's a high probably that they will go with Cisco VOIP clients.
    Thanks...

    When you check the signal coverage, make sure the AP's radio transmit power does not use a transmit power greater than what the client devices can support. For example, by default, the Cisco Unified Wireless IP Phone 7925G uses the highest available transmit power by default (17 dBm / 50 mW for 2.4 GHz and 16 dBm / 40 mW for 5 GHz). It is possible to have a survey report that shows good coverage in all areas; however, if you have APs that operate at the highest transmit power, you might still experience uplink issues where the client devices do not support the same transmit power. For areas where there is deficient coverage, and you increase the AP transmit power to levels that the client devices cannot support, this only increases coverage on the downlink.
    Link for the same :-
    http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html

  • RMBP - high frequency/power noise when doing file operations?

    Hi,
    I noticed today that my new rMBP is emitting some strange high pitched noise, especially when doing heavy files operations like spotlight indexing or startup of the computer. It's louder and more prominent when I connect the AC adapter. It sounds like some power interference, a bit like some broken chargers do or Iphone 4s when transmitting 3G data.
    It's not very loud but I can hear it clearly, when sitting in a silent room, even without closing my ear to the Macbook.
    Has anybody noticed that or can advise something? Is that normal with those machines or some issue that has to be fixed? I really don't want to return it, as it is perfect otherwise...
    Thanks in advance for feedback.

    here is the link to a sample of that noise. Please listen from 15 second:
    http://wikisend.com/download/438696/Memo.m4a

  • Custom Manage Property does not pick up the value from mapping crawl property

    Hi All,
    I have created a custom list with the column name that's called "category".
    Then I ran full crawl and I saw the "ows_category" crawl property is created.
    Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
    After full crawl, I searched Category:keyword but it returned 0 result. 
    But when I search keyword, that list item is retuned
    I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
    It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
    Do you have any suggestion?
    Do I need to reset the index?
    Best Regards,
    Andy

    Hi Andy,
    When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
    So, I suggest you create a new column using another name, then test again, compare the result.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Screen resolution does not change back after using a projector

    Hi!
    My office uses several different models of macbooks, but there is a small problem with all the Airs. When I have been using them with a projector I have to change back the screen resolution manually (go to the system settings and change resolution). On the macbook pros, however, the desktop restores themselves as soon as the projector is disconnected. It seems to me that this should be the standard behaviour of all macs, does anyone know why it is not working on the Airs?
    Best regards
    Erik

    Hi Erik,
    I had this problem on a MacBook and resolved it by recreating some plist files.
    ~/Library/Preferences/ByHost/com.apple.windowserver.xxxxxxxxxxxx.plist
    ~/Library/Preferences/ByHost/com.apple.preference.displays.xxxxxxxxx.plist
    The xxxx's are your machine's EthernetID (MAC Address). I wouldn't delete, rather just move them to your Desktop and restart the computer. See if that resolves it.

  • No thumbnails visible when doing file attach or insert picture from file

    Hi,
    Running OS X 10.4 (Tiger) on a MacBook Pro, I don't see image thumbnails when doing a file attach (or other similar "browse" dialog).
    I do see image thumbnails when changing the desktop background (until I go to Choose Folder) but not when doing tasks like these:
    -- File attach, such as when I'm sending a picture of my kitty cat (using Gmail from either Firefox of Safari).
    -- In Word for Mac: 2004, the Insert Picture dialog (the final dialog box is titles "Choose a Picture").
    -- In Pages '08, the Insert, Choose dialog.
    It there a solution short of firing up VMWare Fusion and doing this from <ack!> Windows?
    I've looked around a fair amount but not found an answer.

    HI Bob,
    In GMail, when you navigate to your images folder, it will be in a Finder window. Make sure your Finder window preferences are set to "Columns". Open a Finder window. In the Toolbar, there is one set with 3 different options... List, Columns, or Icons... choose Columns. When you go to select an image, you should be able to see the thumbnail version in the contextual menu that expands to the right.
    Carolyn

  • HT1689 My iphone is frozen after trying to upload ios5.0  my i phone does not change back to normal format it shows a Cd disc  with a music note and the it is plugged into the port .. how do i get my phone back

    I tried to sync and upload the iOS 5.0 version to my iphone 4   all was well it was processing then it just stopped and Now my actual I phone is frozen. I have turned it off. I have rebooted it several times   the I phone itself shows a CD with a music not over it and under it in small letters  iTunes   with an arrow pointing up wards  and a picture of  the small end cable  on the screen . it will not move change unlock   it is frozen into that position.. how do i get the useage of my phone back   this is rather daunting wehn all i was trying to do was up load the most recent version upgrade of iOS..   Please help any suggestions  thanks

    THe phone is NOT jail broken..   all i want to do is have it return back to how it was before i started the updae version process obviously it did not take  and now it is locked into plave the screen will not change.. after reboots and shut down when i turn it back on the same screeen appears  the cd disc with the music note over it and the arrow pointing upwards  and  a picture of the small end of the charge cord that fits into the actual compute..   The phoen is not jail broken  all i want is to get my phone back  so i can use it   i logged into i tunes and there is no where on the page that gives direction to return it back to its original format prior to trying to up grade .. whe at do i need to do to unlock the frozen compent and reutrn it back to its normal point prior to trying the upgrade

  • How does one change the dictionary default from Portuguese to English?

    In one of the upgrades, instead of defaulting to English, my spellchecker instead defaults to Portuguese, which is the first language listed (also have French and Spanish). So every time I open Firefox, I have to change back to English.

    I've had this problem for over a year. I have three dictionaries installed, but when opening a text box i.e. on a web page where text may be entered e.g. to create email or fill a form on line, 90+% of the words are red-wavy underlined because the dictionary in use is not my native language, but one I may occasionally try to use when I must...which is rarely.
    Firefox NEEDS to have a setting for the Default Spell-Check Language, and it doesn't have one.
    Unfortunately, I stopped coding some thirty years ago, and would love to do the fix, but I've simply been ignorant too long and must beg this of the fine developer crew out there.

  • System does not change at IE4N Transcation from  C1 to C2

    Experts,
    While using IE4N Transaction I am changing valuation cat Batch from C2 to during dismantling process, system takes bydefault as Batch C1 for dismantle & posting to stores. Thanks
    Ramesh

    That's a possability, if the change daily option doesn't work. It seems strange to me that the picture doesn't change daily as it says it should. Can anyone confirm this behavior, or does "change daily" actually work for others?
    Thanks for the suggestion, though. I will consider that if I can't get this mode to work.
    Adrian

  • Cursor does not change back to default after resize

    Hi all,
    I have a modal decorated JDialog, in normal situation, i put the cursor on the border, the curosr will change to resize cursor, so i drag it and the dialog is resized, after resized, the cursor should change back to default cursor when i enter the dialog again, but i found that somotimes after several resizes, the cursor fail to change back to default and remain as the resize cursor.

    Hi
    I think there is nothing so strange to cause the problem so I did not put it before, but if someone can help me I will be thankful.
    public class TestFrame extends JPanel
         private static TestFrame testFrame;
         private JFrame frame;
         public static void main(String args[])
              JDialog.setDefaultLookAndFeelDecorated(true);
              testFrame = new TestFrame();
              testFrame.mainImplementation();
         private void mainImplementation()
              JButton jButton = new JButton("Show dialog");
              jButton.addActionListener(new ButtonActionListener());
              add(jButton);
              frame = new JFrame();
              frame.setContentPane(this);
              frame.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
              WindowListener l = new WindowAdapter()
                   public void windowClosing(WindowEvent e)
                        System.exit(0);
              frame.addWindowListener(l);
              frame.setBounds(0, 0, 500, 500);
              frame.setTitle("Test");
              frame.show();
         class ButtonActionListener implements ActionListener
              public void actionPerformed(ActionEvent e)
                   MyDialog jDialog = new MyDialog(frame);
                   jDialog.setVisible(true);
         class MyDialog extends JDialog
              public MyDialog(Frame owner)
                   super(owner);
                   setModal(true);
                   getRootPane().setWindowDecorationStyle(JRootPane.FRAME);
                   JLabel label1 = new JLabel("Label1");
                   JTextField textField1 = new JTextField();
                   textField1.setEnabled(false);
                   textField1.setMinimumSize(new Dimension(100, 25));
                   textField1.setPreferredSize(new Dimension(200, 25));
                   JLabel label2 = new JLabel("Label2");
                   JTextField textField2 = new JTextField();
                   textField2.setEnabled(false);
                   textField2.setMinimumSize(new Dimension(100, 25));
                   textField1.setPreferredSize(new Dimension(200, 25));
                   JLabel label3 = new JLabel("Label3");
                   JTextField textField3 = new JTextField();
                   textField3.setEnabled(false);
                   textField3.setMinimumSize(new Dimension(100, 25));
                   textField1.setPreferredSize(new Dimension(200, 25));
                   JPanel panel = new JPanel(new GridLayout(3, 2));
                   panel.add(label1);
                   panel.add(textField1);
                   panel.add(label2);
                   panel.add(textField2);
                   panel.add(label3);
                   panel.add(textField3);
                   getContentPane().add(panel);
                   pack();
    }

  • Change owner for transport from an external system

    Hi Everyone,
    I have some transports that were brought into our DEV system from an external system.  (They're BSI transports but I don't think that detail is important.)  We are using a third party transport management system (Insite) and in order to move these transports using Insite, I need to change the owner of these transports to myself.  When I try to do so I receive an error "Request L6BK134312 cannot be changed: Incorrect system or wrong naming convention".
    I've been told that all I need to do is to configure or add the source system to our DEV system and then I should be able to change the owner.  My problem is that I cannot figure out where to go to make this change.
    Can anyone point me in the right direction?
    Thanks!
    Jeff

    Hi Jeff,
    Yes, I do have a regular procedure that I follow to get this to work.  Ruchit Khushu was correct when he said that it had to be "a normal customizing or workbench request."  Creating a transport of copies never worked for me, so I had to set the task to Workbench.
    Here's my procedure:
    1) Import the transports
    2) Go to SE10 and create a new transport
    3) Change the task to Workbench by selecting it, using menu option Request/Task > Change Type... and select Workbench.
    4) Click on the transport number to select it.
    5) Select menu Request/Task > Object List > Include Objects...
    6) Enter a transport you want to include
    7) Repeat 5 & 6 until all transports have been included.
    Hope that helps.
    Jeff

Maybe you are looking for