Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?

I cannot sync my Firefox 18 desktop with iPad or iPhone browsers. I have tried everything suggested on the Web and have tried safe mode as well. When I enter the three-line synch code, I get a sync failure. I have deleted my account and then set up a new account without success. Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?
I’ve spent hours on this and am considering using Chrome as my regular browser since I have no trouble syncing Chrome with apps. Help appreciated.

You can only inspect the sync key via manage account if this device is has been setup and is connected to the sync server.
You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
Look for:
* chrome://weave (Mozilla Services Password)
* chrome://weave (Mozilla Services Encryption Passphrase)
You can look at this version of the about:synckey extension that I have modified to show the sync key in current Firefox versions (desktop and mobile).
* http://www.freefilehosting.net/aboutsynckey-11-fnfx
* [[/questions/942893]]

Why wsgen does not pick up the changed interface in wsdl.jsp?

Hi,
After I changed the type of return value in a method in a stateless EJB. The wsdl.jsp
generated by wsgen does not pick up the changed interface (it still has the old interface).
The installed ejb works well with new type of return value. But the web service (wsdl.jsp)
and client.jar does not work. At begining I thought it might be cached. So I cleaned
the cache in the browser and temporal directory inside wls domain. I also deleted
all old version of ejbs on my local disks. But there is no effect. I am confused.
Please help. Where does the wsgen looking for when generating wsdl.jsp?
Thanks a lot.
Jim

Hi,
Please check the following path if your application is deployed or not properly if you are using eclipse:
Workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps

JRE does not pick up the existing font installed in the OS

Hi,
I am developing an application that required to display UTF-8 string in different language, eg. Japanese, Chinese,..., and having some problems with using font
to display those strings.
I. Problem:
For some reasons, the JRE does not pick up the fonts in either jre/lib/fonts or OS's fonts folder (Windows\Fonts) to use to handle these strings. This results in square boxes displayed.
II. Temporary solutions found:
I searched and found the following solutions
1. Put the font in the fallback folder under jre/lib/fonts
However, this requires to bundle the application with the fonts, it has some problems
* Bundles all possible fonts significantly increase the size of the JRE
* It is a waste if the OS already has the font (as in my case Arial Unicode MS font already installed). 2. Modify the font.properties file *<- which is not recommended.*
III. Questions:
1. So I am wondering if anyone knows other solutions to this problem?
2. I came across some sites that says JRE will pick up the font correctly for a language if the OS is localized on that language. Is it true since I could not yet find that statement on sun website?
Any help or advices are greatly appreciated.
Phuong,
PS: I'm using JDK 6 update 6, Windows XP English version

Hello,
Do any black bars show on the Airport icon at all?
I have a 2007 iMac that can barely see my Base Station 4 feet away, an older eMac 7 feet away sees it great!
On my iMac I use one of these...
http://eshop.macsales.com/item/NewerTech/MXP2802GU2/
And a USB extension cable can give even better range/speed.

Service entry Sheet does not pick any Condition charges From Service PO

Hi All
Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

HI,
Please check Sap note 381030
Along with other thing It says
"Delivery costs are generally not supported in external services management and in case
of blanket purchase orders, item category D or B. Instead of representing delivery
costs via conditions, in case of service documents, freight costs and other, SAP
recommends to add in additional service lines."
So that is the reason you are not getting those account entry in the time of service entry sheet
Use another service line with text ( or service master) for the additional costs as suggested by SAP
Hope it clarifies

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

CRM R12.0.6 Map Type does not exist in the value set

Hi Everyone
When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
Checked the flexfields for the value set but did not set up a value for MAP_TYPES
Checked our PROD environment but no value set up as above.
Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
Thanks very much, Louise

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

Query based report to pick up the value from differences table

Hi,
I am trying to pick up the value from change log differences feild but since it is system variable i am unable to pick it.which table i should pick up to get that .
Regards-
Monica.

Hi Monica,
This would be a tough job if you know the structure of the historical record tables. You need to familiar with all those A tables first. Any changes to one of the record would create a instance of the record before change. AITM is for OITM, AIT1 is for ITM1 etc. Which tables are you looking for?
Thanks,
Gordon

My jsp page is not displayed - tomcat does not pick up the class file

Hi everybody,
I have a Java code which is a controller for a jsp page, called: HomeController.java. Code is as follows:
@Controller
public class HomeController {
protected final transient Log log = LogFactory.getLog(getClass());
@RequestMapping(value = "/mypage")
    public String home() {
        System.out.println("HomeController: Passing through...");
        return "home";
}There is nothing especial in the jsp page: home.jsp. If I go to this url:
http://localhost:8080/adcopyqueue/mypage
I can view mypage and everything works fine. Also in the tomcat Dos page I can see the comment:
HomeController: Passing through...As expected.
Now under the same directory that I have HomeController.java, I've created another file called: LoginController.java. Following is the code:
@Controller
public class LoginController {
protected final transient Log log = LogFactory.getLog(getClass());
@RequestMapping(value = "/loginpage")
public String login() {
        System.out.println("LoginController: Passing through...");
        return "login";
    }And under the same place which I have home.jsp, I've created login.jsp.
Also under tomcat folders, LoginController.class exists under the same folder that HomeController.class exists and login.jsp exists under the same folder which home.jsp exists.
But when I go to this url: http://localhost:8080/adcopyqueue/loginpage
Nothing is displayed! I think tomcat does not pick up LoginController.class b/c on the tomcat Dos window, I do NOT see this comment:
LoginController: Passing through...Instead I see following which I do not know what do they mean?
[ INFO] [http-8080-1 01:43:45] (AppInfo.java:populateAppInfo:34) got manifest
[ INFO] [http-8080-1 01:43:45] (AppInfo.java:populateAppInfo:36) manifest entrie
s 8The structure and the code for HomeController.java and LoginController.java plus the jsp files match. I have no idea why tomcat sees one of the files and not the other?
Clean build did not help. Does anybody have any idea? Any help is greatly appraciated.
Edited by: ronitt on Nov 16, 2011 3:55 PM

Hi,
Please check the following path if your application is deployed or not properly if you are using eclipse:
Workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps

I have a 5 year old Imac. it does not pick up the wireless internet signal in the same location that my new laptop does. Is there anything I can do to it to fix that?

I have a five year old Imc that does not pick up a wireless signal in the same area that my laptop does - is that just because it is old? Is there a card widget I could add to the IMac?

Hello,
Do any black bars show on the Airport icon at all?
I have a 2007 iMac that can barely see my Base Station 4 feet away, an older eMac 7 feet away sees it great!
On my iMac I use one of these...
http://eshop.macsales.com/item/NewerTech/MXP2802GU2/
And a USB extension cable can give even better range/speed.

Delta load does not pick up the new records.

Hi All,
My asset has a transaction in the ECC. In BW system for that asset, I have master data that asset posting period is 01/2008. I ran the delta today but my delta does not pic up the asset. what might the problem? how can i go ahead. here the extractor is 0FI_AA_11.
Kiran

Hi ,
first check wether there are any records in rsa3 for that data source ..
Regards,
Shikha

Photosmart C4180 does not pick up 10x15 photopaper from the photo paper cassette

What can I do to get the printer to pick up 10x15 photo paper from the photo paper cassette? It wil only print when feeding one piece of photo paper at a time. This is tedious and annoying. No problems with ordinary paper.

Hello Mr. Wilks,
I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
I really hope this helps you, feel free to respond if there is anything else I can help with!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

Custom Manage Property does not pick up the value from mapping crawl property

Similar Messages

Maybe you are looking for