System does not change at IE4N Transcation from C1 to C2

Experts,
While using IE4N Transaction I am changing valuation cat Batch from C2 to during dismantling process, system takes bydefault as Batch C1 for dismantle & posting to stores. Thanks
Ramesh

That's a possability, if the change daily option doesn't work. It seems strange to me that the picture doesn't change daily as it says it should. Can anyone confirm this behavior, or does "change daily" actually work for others?
Thanks for the suggestion, though. I will consider that if I can't get this mode to work.
Adrian

Similar Messages

Transaction Launcher: Logical System in Production System does not change

Hi,
I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
Thanks,
Rohan.

Thanks Piyush. Could you be a bit more specific? I followed these steps:
1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
I still am not able to change the logical system. However, I can do it if I change the class name.
While deleting the transaction launcher id, should I be deleting all dependencies?
Regards,
Rohan.

Why my iMac does not change picture when waking from sleep ?

My iMac has Yosemite installed, I have tried to kill the system preferences in the library but it did not solve the problem.
I restarted, PRAM, repaired system permissions, log on off, etc. and nothing, nada !
It used to work without problems, changing the picture on my desktop every time the computer was waken up.
What it could be wrong ?
I have noticed that the CPU is now above 55% most of the time and iStat says that SGProtocol Service is constantly in 99%. I don´t have a clue what that means.
Any help would be appreciated.
Thanks in advance,
Rod

OK. I found the solution.
The computer changes the picture after sleep is activated from the power button but no from a hot corner, like it used to do. Obviously is a bug.
I ruled out the iStat, SG Protocol and high CPU, which are not related with the problem.
It is not a big deal, now I set it to change the image every hour, and it works !
Thanks anyway.

Iak file does not change channel config?

I am relatively new to Lab-View so please bear with me
I have multiple iak files setup for different vi's that require some different ranges on the AI-100 modules I am using (FP-1601 Ethernet module). My problem is when I start a vi, with the iak file path needed wired to the FP-open tag, it does not change the channel configuration from whatever is currently on the modules themselves.
Is this correct? I know I can get the channels to update to the iak file by opening it in FP explorer and editing the device clicking on the channel config and syncing to the file. This will be very tedious for the un-trained test monkey these different programs are designed for. Am I missing some option somewhere that syncs the modules t
o the iak file when you open a field point session?

From a program perspective, the IAK file is solely used to provide channel mapping information. From a FieldPoint Explorer (or NI-FP) perspective, the IAK file contains all channel naming information, communication mapping information and channel configuration information. In FieldPoint Explorer (3.0.2 or less), the only way to change the channel configuration between IAK's, is to switch IAK's in FP Explorer and right click on each (and every) FieldPoint IO Module, choosed Edit This Device and then choose Channel Configuration. When the dialog box asks you whether to use the Device or File settings, choose File. In NI-FP 4.0, there exists an option to download the entire configuration to an entire bank at a time, but there is still no method of downloading the co
nfiguration file programmaticly at run time.
However, another option in the form of the Ethernet Configuration VI's exists. They allow you to programmatically configure each channel (range & attributes). For an understanding of the range and attribute values, you can cross reference the FP-1000/1001 Programmers Reference Manual.
Regards,
Aaron
Regards,
Aaron

System does not prompt to change the initial passwd

hi,
While trying to login to the SAP system with my initial password, the system does not prompt me to change my initial passwd and lets me in, could anyone let me know how can i change the system to force change the initial passwd.
thank you
Jonu

Please provide more details about "your system".
Typically causes:
- Your user ID is either of type SERVICE for which password changes are not required and they cannot change their own passwords either. So you are "consuming" a service and prior authentication does not have anything to do with the authentication of the SAP system.
- You are logging on from an external client system which is calling RFC's to logon to the SAP system. By default, this only prompts for password change or rejects the logon attempt if you instruct the system to do so.
Please provide more details.
Cheers,
Julius

From time to time when I click a searched link the colr of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thankste

From time to time when I click a searched link the color of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thanks

Here's the error message I get.
Note the TC is connected to my Airport Extreme via ethernet and my iMac is also connected to the AX via ethernet so it's not a wifi issue.
I can see the TC in the finder so it's not 'gone' from the network either.
Also note that just then the TM system pref pane was claiming a backup error, citing my 'network password' and still refusing to backup. I waited 5 minutes and did some tidying of my office while I pondered this and then tried again and voila it worked ok.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

When I try to watch any video clip I get this: The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's we

When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!

This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates <

The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's website.

The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.

You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

System does not allow to me to change collect method in RZ20

Hi.
I Have the problem with my SAP R/3.
I have productive, based on 4 application servers. In RZ20, alerts of MTE Operating System for one application server is not work. In nodes properties I have collect method "CCMS_Cpu_Collect_c". On other application servers - "CCMS_OS_Collect". System does not allow to me to change collect method
What will I do? Please help me.
Edited by: Viktor Unsub on Jul 18, 2008 4:55 PM

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

Firefox 3.6 does not open onto my desktop from the dock when links in email or other files are opened. I have eMac with system 10.4.11 in English

Firefox 3.6 does not open onto my desktop from the dock when links in email or other files are opened, use to. I have eMac with system 10.4.11 in English
Thanks, Claude Combs
[email protected]

Firefox 3.6 does not open onto my desktop from the dock when links in email or other files are opened, use to. I have eMac with system 10.4.11 in English
Thanks, Claude Combs
[email protected]

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Source system restore - Source system does not exist

Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashish

I get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

When Matching Users Via Email, Changing Email Address Does Not Change Login

Well, the subject pretty much says it all, but here're some examples of what's going on:
Initial Data
- Create 2 Business Partners in SAP, C1 and C2.
- Create 2 Contact Employees in SAP, Adam with email adam at eden.org in C1 and Eve with no email in C2.
Synch
- Run Initial Synch followed by Standard Synch (for good measure).
- Web Tools gets user Adam with username adam at eden.org.
- Web Tools gets user Eve with username 2, the unique key for SAP's Contact Employee.
Data Change In SAP
- Adam's email is removed.
- Eve's email is populated with eve at eden.org.
Resynch
- Run Standard Synch.
- Web Tools changes both email addresses, with Adam's being erased and Eve's becoming eve at eden.org.
- Web Tools does not change the UserID, leaving Adam's as adam at eden.org and Eve's as 2.
That last bullet is the big problem: if a user changes an email address, the username doesn't change. Is there any way to change this across the board, or perhaps even force users to login via their current email address?

Also, there is a field in the Users table called EmailLogin. I have tried without success to change this field so that the user would use this field to login instead of the UserID, but have been unsuccessful in getting it to work.
As an alternative, the login control in /plugins/loginblock.ascx contains, as a portion, the following code:
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        NPUser user = new NPUser(loginMain.UserName);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Wouldn't it be simple to do the following?
    protected void GetUserIDFromDBByEmail(string email) {
        string userid;
        System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection();
        System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand(conn, "SELECT Users.UserID FROM Users WHERE Users.Email='" + email.Replace("'", "''") + "'");
        userid = (string)cmd.ExecuteScalar();
        cmd.Connection.Close();
        conn.Close();
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        string userid;
        // Though we're passing the "username" from the form,
        // we know that we're expecting the email to be in it
        userid = GetUserIDFromDBByEmail(loginMain.UserName);
        NPUser user = new NPUser(userid);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Again, the benefit to this is that you can synch using the Internal B1 Contact Code, which will remain constant and unique, and have the availability to change the way the user logs in by modifying the email address. Of course, email addresses would have to remain unique as well, but that's an easy enough thing to check for.

System does not change at IE4N Transcation from C1 to C2

Similar Messages

Maybe you are looking for