Company code currency for debit and credit information

hi
i am uisng 0fi_ap_4
Debit amount in Company code currency
Credit amount in company code currency
Cash discount amount (Company Currency)
in above cases what fields i need to take form 0fi_ap_4 datasource?
company code currency means will be local currency?

Hi Reddy,
True the local currency means the company code currency, because the infoobject 0LOC_CURRCY is liked to the field
LCURR from the source T001-WAERS (T001 is company codes table).
And the related fields for the infoobjects are:
Infoobject                Description                                Field in Datasource          Source
0CREDIT_LC            Credit amount in local currency         DMHAB                            Calculated
0DEBIT_LC              Debit amount in local currency          DMSOL                            Calculated
0DSC_AMT_LC       Cash discount amount                      SKNTO                             BSIK- SKNTO
Regards.
Yacine.
Edited by: Yacine Bradai on May 5, 2010 3:12 AM
Edited by: Yacine Bradai on May 5, 2010 3:16 AM
Edited by: Yacine Bradai on May 5, 2010 3:17 AM
Edited by: Yacine Bradai on May 5, 2010 3:19 AM
Edited by: Yacine Bradai on May 5, 2010 3:19 AM

Similar Messages

Display group currency for debit and credit

I have one bank account, the local currency is MYR, we want to display in USD for both debit side and credit side for Feb.2010, is it possible?
which report we can use

HI,
Use transaction S_ALR_87012277.
Enter 30 (Group Currency) in the currency type field.
Add other selection parameters if required and execute....
Regards,
Chintan Joshi

Conversion error in company code currency for general costs activity

PS Experts,
Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
This is the scenario
Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
in the third activity (General act) in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
note: Company code curr same as projet curr & controlling area curr
Is there any setting is missing in customizing
Conversion error in company code currency for general costs activity 0010
Message no. CK443
Diagnosis
For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
Procedure
Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
Thanks

Hi Yassin,
I believe you have maintained exchange rates for rate type M as per your config in OPSB.
Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
This will solve your problem.
Regards,
Kabir

Use of cost relevant Item categories L2N and G2N for debit and credit memo

Dear Forum memebers,
For credit and debit memo one of the customised client repot is showing cost value which is not expected for credit and debit memo in the invoice register.
This is due to use of L2N and G2N which are cost relevant item categories.
Why should debit and credit memo item category should be cost relevant.??
Best Regards,
Kanwal

Well if your company do not want to adjust the cost of goods sold when any credit / debit is raised, then yes you can go ahead.
Thanks
Sai
Edited by: Sai on Nov 18, 2009 7:47 PM

New pricing procedure for debit and credit memo

Hello Sir,
After defining new pricing procedure of debit and credit memo for retro billing.copy control using pricing type b in VTFF but it take billing pricing in credit and debit memo.not in new pricing .Is am missing something please suggest proper solution .

Thanks for precious time given please go through this
Tax Calculate
Basic
10.0000
100.0000
12%
1.2000
12.0000
2%
0.0240
0.2400
1%
0.0120
0.1200
Total
11.2360
112.3600
12.50%
1.4045
14.0450
Net
12.6405
126.4050
tax calculate like this but it come
Basic
10.0000
100.0000
12%
1.2000
12.0000
2%
0.0240
0.2400
1%
0.0120
0.1200
Total
11.2360
112.3600
so,plz suggest how it calculate including vat
vat/cst

Not able to generate total for debit and credit columns in FSG

SR 3-1507064871
Version - 12.0.6
Created a FSG report using "Note 311912.1 - How to Create FSGs to show Debit and Credit Balances in Different Columns"
But not being able to get the totals of the columns.
When trying to do totals, it always sum up and brings the result as zero.
Edited by: user10637798 on Mar 15, 2010 3:17 AM

Please relink all executables on test and retest the issue
if issue still exist then
please see
A Few Tests Might Be Corrupted When Running A Diagnostics Test [ID 1377769.1]
please reapply those patches with adpatch option given in the doc and retest the issue on test
AppsMAsti
Sharing is Caring

How to setup FS Items for debit and credit only Financial Statement Items

Hi,
In Financial Statement, there are line items that report for the same accounts that are debit only under Assets and credit only under Liabilities. How should I setup Consolidation Chart of Accounts/FS Items in EC-CS for such items?
Regards,
B Lim

Hi Prem,
We have already assigned all the co-codes to only 1 COA.
However, we did not create any Group COA and has no intention to.
My issue is this:
As you are aware in the Financial Statement, we are able to maintain for GL accounts to be reported under Assets by specifying the DR indicator and for the same accounts to be reported under Liabilities by specifying the CR Indicator.
When I maintain the Consoliated COA in the Consolidation module (tcode CX16), I have problem with these accounts. How do I create the FS Items such that DRs goes to Assets lines and CRs goes to Liabilities?
Regards,
Bernard

Company code restriction for dashboard and webi reports in BOBJ

Hi Friends,
We have a requirment where we need to restrict user on company code level in bobj.
we have some dashborads and webi reports which need to be restricted at company code level, hence i have created a role in BI and restricted the queries (bex queries) on company code level and same role and user i have imported in BOBJ.
Now i can see the role and user in BOBJ and also i can login to BILAUNCH PAD with authentication as SAP But unable to run the webi reports and dashboard hence i have added those reports to this user in bobj and now i can run the reports, but restriction is not working.
In BI I am able to restrict user but in bobj its not restricting. kindly let me know if i am missing anything?
We are having BO 4.0 SP6.
Thanks
Basis

Hi Saurabh,
In BI its wokring perfectly fine.
I can run the query for specific company code and data is being populated as the respective compay code.
I have also configure SSO between BI & BO using below link
http://wiki.scn.sap.com/wiki/display/BOBJ/How+to+setup+SSO+against+SAP+BW+with+SAP+BO+BI4.0+Common+Semantic+Layer+%28UNX%29+or+BICS
but when i am trying to create a olap connection in IDT with SSO connection test is getting failed with belwo error.
com.businessobjects.mds.olap.OlapException: [Internal] SSO token or User password is empty.
I checked STS is already there in APS .
Thanks
Basis

How to know debit and credit transaction key for movement type

Hi,
With T. code OMWB account assignment simulation we can see all the accounts which are involve for debit and credit enties but I want to know is there any T. code or method with which we can know which transaction key will be debit and which will be credited like for movement type 101 the transaction keys are GBB, BSX WRX etc. i want o know whethere GBB a

Hi,
Thanks for your reply, but with this we can see the for GBB which is the credit account and which account is use for debit entry, like this for all transaction event key like WRX, BSX etc. we can see the G/L account use for Debit and credit, but i want to know for particular selction of Plant, material , movement type, my GBB account will have entry in debit account or credit account How we can know this.
regards,
zafar

Document Currency Vs Company code Currency.

As per business requirement Company code level currency is mainatained as USD but when i am generating the Excise invoice for loacl currency INR., the Excis edocument posting in USD . can any body helpme out to Post excise invoice as document currency where Excise tables is also updating the USD.
rgadrs
Ramesh.

Closing this Thread as I found the answer
Within the Purchase Order, when the new TOTAL NET ORDER VALUE is higher than the old one, release strategy will be triggered once release charateristic is set for checking rule
System will check through The total net order value which is linked to CEKKO-GNETW for a purchase order.
In purchase order, the currency conversion will act as below:
Purchasing documents: Header currency converted to company code currency.
Company currency converted to characteristic currency
Hence, eventhough the exchange rate is increased but document currency is remained unchanged, the company code currency is increased and hence trigger release strategy.
for more information, please refer to http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE

Different company code currency

What is the significanc of flagging "different company code currency" in OKKP setting.
What are the advantages of the above settings?
What kind of reports available by flagging this?
Moderator: Please, read help.sap.com

Hi Anilkg
We are not able to directly check this indicator. When you select the currency type other than 10-Company code currency, this indicator gets indirectly ticked and thereon the system allows different company code currency for the companies which are assigned to one controlling area which has specific controlling area currency. There is no specific advantage or report by this tick. It only informs that different currencies are allowed for the companies assigned to the controlling area.
Trust this helps much!
Cheers!

Company code currency change over

Dear all,
Want to know information about company code currency changes.
Our company code currency is SGD and now want to change to USD.
Our fiscal year is Jan-Dec and we are in SAP 5.0 version.
Can you let us know whether itu2019s possible to do the change?
If so, how and can we perform this activity in the middle of the year.
How to take care of the open items like PO,SO,Vendor ,Customer, which we have already posted in the system with our SGD currency.
And if not, do suggest and alternate/workaround.
Heard about, that this can be achieved with PARALLEL CURRENCY activation.
Not having much idea about Parallel Currency.
Do suggest.
Regards,

Hi,
A change of the company code currency is possible. The change is only possible as at year end (the actual running of the programms can be done mid-year provided certain customising has been done prior to the first posting in that year).
All items will get changed from old local currency to new local currency.
You can read the documentation in Spro > Cross-Application Components > EMU > Local Currency Changeover.
This is a very complex procedure so be sure to read all the documentatin first.
Kind regards

QUERY FOR CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE

Hi Friends,
   I need query for CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE for selection criteria from date and to date.
   I know the Trial Balance Report will sort out this issue... but i need routeday wise report
1. Business Partner Master Data - i created one UDF field called U_Routeday (MONDAY, TUESDAY, WEDNESDAY,THURSDAY,FRIDAY)
2. The query should be like selection criteria
                              - Routeday [%0]
                              - Posting Date [%1]
                              - Posting Date [%2]
CardCode
Debit
Credit
Balance
D10503
25031.50
24711.50
2962.00
D10641
5466.00
7460.00
285.00
D10642
2866.00
142.00
give any helpful query ASAP... Thanks in advance

Hi,
Try this query:
Declare
@fromdate as datetime
Declare
@Todate as datetime
Declare
@Code as nvarchar(25)
set
@fromdate = ( select min(Ta.[RefDate]) from OJDT ta where
Ta.[RefDate] >= [%0])
set
@Todate = ( select max(Tb.[RefDate]) from OJDT tb where Tb.[RefDate]
<= [%1])
set
@code = (select max(Tc.[ShortName]) from JDT1 tC where Tc.[ShortName]
= [%2])
SELECT
[Name] as AcctName, [Jan]= sum([1]), [Feb]= sum([2]), [Mar]=
sum([3]), [Apr]= sum([4]), [May]= sum([5]), [June]= sum([6]),
[July]= sum([7]), [Aug]= sum([8]), [Sept]= sum([9]), [Oct]=
sum([10]), [Nov]= sum([11]), [Dec]= sum([12]), total = sum
(isnull([1],0)+ isnull([2],0) + isnull([3],0) + isnull([4],0) +
isnull([5],0) + isnull([6],0) + isnull([7],0) + isnull([8],0) +
isnull([9],0)+ isnull([10],0) + isnull([11],0) + isnull([12],0))
from
(SELECT
T0.[ShortName] as Name, sum(T0.[Debit]-T0.[Credit]) as T,
month(T2.[RefDate]) as month FROM JDT1 T0 INNER JOIN OACT T1 ON
T0.Account = T1.AcctCode INNER JOIN OJDT T2 ON T0.TransId =
T2.TransId WHERE T2.[RefDate] between @fromdate and @todate and
T0.[ShortName] = @code GROUP BY T0.[ShortName],T2.[RefDate] ) S
Pivot
(sum(T)
For Month IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12])) P
group
by [Name],[1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12]
Let me know your result.
Thanks & Regards,
Nagarajan

Seeking Information on Company Code Currency in COPA

Greetings all,
I am working on a project to activate the company code currency flag in COPA (attributes under KEA0). I have activated the flag in a test system and as expected I now get two PA docs, a 10 and a B0. The oddity begins when I compare PA docs created from SD and FI. In my example I am creating documents in three different currencies; 1) transaction curr = SEK, 2) company curr = EUR, and 3) operating concern curr = USD. I am on ECC 6.0 EP 4.
If I create a PA from a billing document (record type F) then the data looks exactly as I expect it. The foreign currency key (FRWAE) is SEK. I can see the transaction currency is SEK with value fields in SEK, I can see the company currency is EUR with an exchange rate of SEK <-> EUR along with value fields in EUR, and I can see the operating concern currency is USD with an exchange rate of SEK <-> USD along with value fields in USD.
However, if I create a similar document with FB50 (record type B) the foreign currency key (FRWAE) is EUR instead of SEK and the exchange rate to USD is 1 (KURSF) instead of the actual exchange rate. I only get company currency and operating concern currency values. The values in the value fields are correct per currencies eventhough the fx rate is whacked. In FI the transaction currency is SEK but you would never know it in PA. The really bizarre thing is when I go to display the PA doc (I am branching from the FI doc) it behaves very odd. The default view is Op conc which is in USD. If I click the foreign curr button it displays USD. If I click the company code curr button it displays EUR. If I then go back to the foreign curr view it is now in EUR???
I am hoping someone can explain the difference between the two, or at least point me to a good resource. If there is a rational reason for this system behavior then I am hoping someone can suggest some way to manipulate the data.
Many thanks,
Chris

Hi,
CO-PA will only store values in either operating concern currency or company code currency(if active). For FI postings CO-PA fills the field foreign currency in the CO-PA line item with the currency with the currency of the company code. The reason for this is that the currency conversion for FI documents is that the currency conversion for FI documents is executed with the
company code currency and the field FRWAE is always filled with the currency that is used for conversion. This is designed in order to allow a reconciliation between FI and CO-PA. CO-PA uses company code currency as the base to convert to operating
concern currency for FI postings. The field FRWAE is not intended to reflect the transaction currency. It is just used to store the currency from which the conversion to the currency of the record is made.
In case of direct postings from FI/MM CO-PA takes over group currency directly if group and operating concern currency are identical. As group currency is translated in FI with exchange rate ( according the settings in transaction 'OB22' for company code) you'll find this exchange rate in CO-PA too. I have attached SAP Note 604936 to this ticket that describes the translation logic used in PA for postings from FI and MM.
The currency translation from SD however works differently as described in SAP Note 429517. In this case PA will not consider any values in group currency. Values in operating concern currency are either translated based on transaction or company code currency using exchange rate type 'M'.
Hope this will help.
Best regards, Takashi
Edited by: Takashi Kotani on Mar 6, 2010 2:24 AM

No company code found for plant 0001 and sales organization 0001

Hi BW Experts,
I am using the datasource 0PLANT_ATTR.While loading the data, i am getting the warning message as "No company code found for plant 0001 and sales organization 0001". I have replicated all the Currencies by using the "Global Settings".Do i need to do any settings in BW Side.
Please help on this Issue.
Thanks,
Ram

Hi Ram,
It is not pertaining to the Currency translations or any?
The warning message is because:
In the 0PLANT there is 0comp_code as attribute; while loading the data from 0PLANT_ATTR datasource there for that particular PLANT "0001" and Sales Org "0001" system couldnt find the 0comp_code.
As it is not maintained in the R/3 system.
This is why the warning messages are coming out..
Hope you understood...
Regards,
Ravi Kanth

Company code currency for debit and credit information

Similar Messages

Maybe you are looking for