Display group currency for debit and credit

I have one bank account, the local currency is MYR, we want to display in USD for both debit side and credit side for Feb.2010, is it possible?
which report we can use

HI,
Use transaction S_ALR_87012277.
Enter 30 (Group Currency) in the currency type field.
Add other selection parameters if required and execute....
Regards,
Chintan Joshi

Similar Messages

Company code currency for debit and credit information

hi
i am uisng 0fi_ap_4
Debit amount in Company code currency
Credit amount in company code currency
Cash discount amount (Company Currency)
in above cases what fields i need to take form 0fi_ap_4 datasource?
company code currency means will be local currency?

Hi Reddy,
True the local currency means the company code currency, because the infoobject 0LOC_CURRCY is liked to the field
LCURR from the source T001-WAERS (T001 is company codes table).
And the related fields for the infoobjects are:
Infoobject                Description                                Field in Datasource          Source
0CREDIT_LC            Credit amount in local currency         DMHAB                            Calculated
0DEBIT_LC              Debit amount in local currency          DMSOL                            Calculated
0DSC_AMT_LC       Cash discount amount                      SKNTO                             BSIK- SKNTO
Regards.
Yacine.
Edited by: Yacine Bradai on May 5, 2010 3:12 AM
Edited by: Yacine Bradai on May 5, 2010 3:16 AM
Edited by: Yacine Bradai on May 5, 2010 3:17 AM
Edited by: Yacine Bradai on May 5, 2010 3:19 AM
Edited by: Yacine Bradai on May 5, 2010 3:19 AM

Use of cost relevant Item categories L2N and G2N for debit and credit memo

Dear Forum memebers,
For credit and debit memo one of the customised client repot is showing cost value which is not expected for credit and debit memo in the invoice register.
This is due to use of L2N and G2N which are cost relevant item categories.
Why should debit and credit memo item category should be cost relevant.??
Best Regards,
Kanwal

Well if your company do not want to adjust the cost of goods sold when any credit / debit is raised, then yes you can go ahead.
Thanks
Sai
Edited by: Sai on Nov 18, 2009 7:47 PM

New pricing procedure for debit and credit memo

Hello Sir,
After defining new pricing procedure of debit and credit memo for retro billing.copy control using pricing type b in VTFF but it take billing pricing in credit and debit memo.not in new pricing .Is am missing something please suggest proper solution .

Thanks for precious time given please go through this
Tax Calculate
Basic
10.0000
100.0000
12%
1.2000
12.0000
2%
0.0240
0.2400
1%
0.0120
0.1200
Total
11.2360
112.3600
12.50%
1.4045
14.0450
Net
12.6405
126.4050
tax calculate like this but it come
Basic
10.0000
100.0000
12%
1.2000
12.0000
2%
0.0240
0.2400
1%
0.0120
0.1200
Total
11.2360
112.3600
so,plz suggest how it calculate including vat
vat/cst

Not able to generate total for debit and credit columns in FSG

SR 3-1507064871
Version - 12.0.6
Created a FSG report using "Note 311912.1 - How to Create FSGs to show Debit and Credit Balances in Different Columns"
But not being able to get the totals of the columns.
When trying to do totals, it always sum up and brings the result as zero.
Edited by: user10637798 on Mar 15, 2010 3:17 AM

Please relink all executables on test and retest the issue
if issue still exist then
please see
A Few Tests Might Be Corrupted When Running A Diagnostics Test [ID 1377769.1]
please reapply those patches with adpatch option given in the doc and retest the issue on test
AppsMAsti
Sharing is Caring

How to setup FS Items for debit and credit only Financial Statement Items

Hi,
In Financial Statement, there are line items that report for the same accounts that are debit only under Assets and credit only under Liabilities. How should I setup Consolidation Chart of Accounts/FS Items in EC-CS for such items?
Regards,
B Lim

Hi Prem,
We have already assigned all the co-codes to only 1 COA.
However, we did not create any Group COA and has no intention to.
My issue is this:
As you are aware in the Financial Statement, we are able to maintain for GL accounts to be reported under Assets by specifying the DR indicator and for the same accounts to be reported under Liabilities by specifying the CR Indicator.
When I maintain the Consoliated COA in the Consolidation module (tcode CX16), I have problem with these accounts. How do I create the FS Items such that DRs goes to Assets lines and CRs goes to Liabilities?
Regards,
Bernard

How to know debit and credit transaction key for movement type

Hi,
With T. code OMWB account assignment simulation we can see all the accounts which are involve for debit and credit enties but I want to know is there any T. code or method with which we can know which transaction key will be debit and which will be credited like for movement type 101 the transaction keys are GBB, BSX WRX etc. i want o know whethere GBB a

Hi,
Thanks for your reply, but with this we can see the for GBB which is the credit account and which account is use for debit entry, like this for all transaction event key like WRX, BSX etc. we can see the G/L account use for Debit and credit, but i want to know for particular selction of Plant, material , movement type, my GBB account will have entry in debit account or credit account How we can know this.
regards,
zafar

QUERY FOR CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE

Hi Friends,
   I need query for CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE for selection criteria from date and to date.
   I know the Trial Balance Report will sort out this issue... but i need routeday wise report
1. Business Partner Master Data - i created one UDF field called U_Routeday (MONDAY, TUESDAY, WEDNESDAY,THURSDAY,FRIDAY)
2. The query should be like selection criteria
                              - Routeday [%0]
                              - Posting Date [%1]
                              - Posting Date [%2]
CardCode
Debit
Credit
Balance
D10503
25031.50
24711.50
2962.00
D10641
5466.00
7460.00
285.00
D10642
2866.00
142.00
give any helpful query ASAP... Thanks in advance

Hi,
Try this query:
Declare
@fromdate as datetime
Declare
@Todate as datetime
Declare
@Code as nvarchar(25)
set
@fromdate = ( select min(Ta.[RefDate]) from OJDT ta where
Ta.[RefDate] >= [%0])
set
@Todate = ( select max(Tb.[RefDate]) from OJDT tb where Tb.[RefDate]
<= [%1])
set
@code = (select max(Tc.[ShortName]) from JDT1 tC where Tc.[ShortName]
= [%2])
SELECT
[Name] as AcctName, [Jan]= sum([1]), [Feb]= sum([2]), [Mar]=
sum([3]), [Apr]= sum([4]), [May]= sum([5]), [June]= sum([6]),
[July]= sum([7]), [Aug]= sum([8]), [Sept]= sum([9]), [Oct]=
sum([10]), [Nov]= sum([11]), [Dec]= sum([12]), total = sum
(isnull([1],0)+ isnull([2],0) + isnull([3],0) + isnull([4],0) +
isnull([5],0) + isnull([6],0) + isnull([7],0) + isnull([8],0) +
isnull([9],0)+ isnull([10],0) + isnull([11],0) + isnull([12],0))
from
(SELECT
T0.[ShortName] as Name, sum(T0.[Debit]-T0.[Credit]) as T,
month(T2.[RefDate]) as month FROM JDT1 T0 INNER JOIN OACT T1 ON
T0.Account = T1.AcctCode INNER JOIN OJDT T2 ON T0.TransId =
T2.TransId WHERE T2.[RefDate] between @fromdate and @todate and
T0.[ShortName] = @code GROUP BY T0.[ShortName],T2.[RefDate] ) S
Pivot
(sum(T)
For Month IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12])) P
group
by [Name],[1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12]
Let me know your result.
Thanks & Regards,
Nagarajan

How to Post a a debit and credit in background? Reclassificaton

Hi Gurus,
I have a question regarding how to post a debit and credit in background? In fact I create an internal table and displayed in ALV grid where there are the amounts in local and transaction currency which are atypical. And after I have to post them for a reclassification because those amounts are not correct depending it is a vendor or customer.
I would like to know if there is a function that I can use. I found a bapi 'AcctngGLPosting' but to be honnest I don't know how to use it. There is no example.
Ayone could please help me?
Thanks in advance.
Regards,
Mohamed.

Hi,
Check this for a example for BAPI_ACC_GL_POSTING_POST
[http://www.sapfans.com/forums/viewtopic.php?p=546963&sid=6f418d93956fdc91bdb5e7544a9d77ef]
Regards,
Vik

FI Customer Account Statement with Debit and Credit Columns

Hi SAP Expert,
We are using form (developed from T-code: SE71) to send customer account statment for only open items this is working fine.
Now My wants customer account statement for all transactions but with debit and credit in a separate columns. is there any way we fulfill these kind of request?
if any particular logic then let me know please.
thanks in advance
b/r
prashant rane

Dear Vivek,
You logic is helpful can I apply this in SE71 form development?
Below is my customer layout format
Document # | Document Date | Reference | Debit Amt | Credit Amt |
In bottom toal Debit / credit balance figure
can I use any code/login is SE71 form or I will need to create any development report which involves user exit?
I am looking for SE71 optios first
thanks in advance
Prashant Rane

Report FS Item debit and credit separated

Dear Gurus,
In FI Financial Statement Variant is usual to separate debit and credit balance in diferent nodes for some accounts. This is done because debit is taken as asset and credit as liability.
I'm triying to do this in FS Item Hierarchy, but unable. Consolidation database stores total account balance (debit + credit), and query shows the same information. I tried with the sign in the FS item definition, but it changes in both nodes.
Any clues on how to do this?
Thanks in advance for your help.
Best regards,
Manuel.

Hello Manuel,
Thanks for your detailed information. Now it's more understandable what you meant.
OK. Here we go.
There are 2 characteristics in SEM-BCS which may change the sign of the incoming during data load amounts : MovementType and FS item itself. Debit sign represent plus and credit sign u2013 minus. The signs may act together: if the data load method usage of both signs is set up, then the resulting amount is determined as following:
Resulting amount = Incoming amount * SignOfItem * SignOfMoveType.
Certainly, itu2019s possible to use a sign only one of the characteristics or not to use at all.
Again, it is related only to the uploaded information. And the sign of the turnover should be determined by the supplying system, since itu2019s clear that on the asset account might be credit activities, and for example, on a liability account u2013 debit activity.
The system expects the internal presentation of amounts in the database as conforming the accounting logic (with small numbers of exceptions):
Assets in B/S and Expenses in I/S as positive and
Equity and liabilities in B/S and Revenues in I/S u2013 negative.
The external presentation of reports depend completely on:
1. hierarchies built on FS items (if used in queries)
2. structure of queries.
Theoretically, I may construct a BEx query where all positive amounts will be in one column and all negatives u2013 in another one.
>
> As a workaround, I think that the following will do (if possible): 0BCS_C50 infocube has only total balance for each account. The solution would be to show total balance in assets if credit balance or show total balance in liabilities if debit balance.
Then, if to remember about internal presentation of the amounts in the B/S, it's easier to apply the following logic:
Negative amounts on the assets accounts is to be reclassified to liabilities and
Positive amounts on the liabilities accounts is to be reclassified to assets.
Reclasses in SEM-BCS may do such a job.

Debit and Credit notes not to update COPA cost of sales when doing price ad

Hi Experts,
Please help me to fix the below issue.
When we correct price adjustments on customer accounts we use debit and credit notes to do these price corrections. We first process a ZCR order type with reference to the original invoice to reverse the transaction and then we process a debit meme request ZDR with the correct details to invoice the customer correctly.
These credit and Debit memo request are purley for pricing problems and do not effect cost of sales. Currently these Debit and credit memos are updating the cost of Sales value field (COS on Market Price - VV013) .
This creates a problem since the credit and debit memo happen in subsequent months e.g. The credit memo is reversed at the old cost of sales value since SAP keeps a reference to the cost of sales at that time but the debit memo creates the cost sales at the new standard cost which is obviously not the same as the original cost of sales. We therefore sit with differences which will not equal FI since FI cost of sales was updated with the goods issue price in the month that the goods issue happened.
We therefore need to zerorise the following value fields when doing ZDR dedit memo and billing type ZL2 and ZCR credit memo billing type ZG2.
Gross Weight in KG VV004
Invoiced Qty KG net VV002
Invoiced Qty in L VV001
Invoiced Qty in L15 VV003
Invoiced Quantity VV005
COS on Market Price VV013
VV001 to VV005 are quantity fields and VV013 is Value field.
Please help me how to fix the issue.
Regards,
Amar.

Hi,
Sorry, I probably confused things by mentioning Revenue. Your settings are correct, with Revenue defined as a revenue element (11) rather than a cost element (1).
With respect to WIP (P&L), I would create it as a cost element, since it represents the absorption of cost centre costs and materials into the production of goods, even though the goods are not yet complete. When the goods are completed they will be credited in CO-OM and debited to stock using a similar entry. The impact of these credits (to WIP or to Stock) is to move costs out of CO-OM into the goods produced (CoGS). In CO-OM, the net result of Costs less credits to WIP/Stock, indicates the efficiency of your cost centres or the accuracy of your standards.
I would also create the manufacturing variance accounts as Cost Elements and settle them back to your production costs centres (or possibly CO-PA if you used it), since they are also a reflection of the efficiency of your cost centres - i.e. if a Cost Centre manager is not achieving the standards, (s)he should be accountable for the variance, and if you are concerned about reconciling CO-OM and the costs in P&L, you won't reconcile if the variances aren't posted back to CO.
Regards,
Marc

Program to create Debit and Credit Memos

Hello everybody!
I am new to SAP and I need to develop ABAP program to create Debit and Credit Memos...
1. Debit/Credit memos created with header (Higher level) item and sub item/s
2. One Debit/Credit memo created per customer
3. A part of information for memos program will receive through XI (Excel file coming through XI)
maybe someone can help?
Helpfull answers will be awarded!
BR, M.

You dont need a custom prog to create a debit memo or credit memo.
You can raise a Credit Memo for a Vendor using the transction code FB65 (without reference to an invoice) or MIRO (if it is with reference to an invoice) and the system would pass the following accounting entry
Dr. Expenses A/c
Cr. Vendor A/c
This particular document would have a payment term and payment due date. While running Automatic Payment Process, depending on the payment method the system will pick up the document and create a cheque / electronic transfer etc for the vendor with the following entry
Dr. Vendor A/c
Cr. Bank Clearing A/c
In the case of Customer you can account the credit memo (without reference to invoice) using FB75 or VA01 (Order Type CR, if it is with reference to an invoice). While you create the billing document for the order type CR the system would raise the following accounting
Dr. Expenses A/c
Cr. Customer A/c
This particular document would have a payment term and payment due date. While running Automatic Payment Process, depending on the payment method the system will pick up the document and create a cheque / electronic transfer etc for the customer with the following entry
Dr. Customer A/c
Cr. Bank Clearing A/c

Debit and Credit in FB50

Dear All,
We use FB50 to post JV's. Is there any way to display the difference b/w Debit and Credit on the same screen without simulating. When there is a difference in Debit and Credit the indicator is red and when Debit is equal to credit indicator is green.
Syed Abid Hussain

Hi San,
Yes we can use f-02 and it shows the balance. But as you know that FB50 is enjoy screen that is why the user is convenient in posting.
What I want to know if I can see the debit credit difference on the screen in FB50.
Syed Abid Hussain

Debit and credit memos

HI
Can anyone give me some information on debit and credit memos?
Thanks and Regards
Davinder Singh

Hi Davinder,
Credit memo is a posting that reduces the balance of receivables or payables.
Eg : We raise a PR for 10 Pc @ Rs.10.
If the vendor enters the price as Rs.15/pc wrongly , the total amount payable
becomes Rs.150. Here a credit memo is raised for Rs.50, so that we need to pay only Rs.100.
Also you can imagine of situations, where there is a discount for a particular material, but the discount entry is missed, In such situations also a credit memo is raised to adjust either the value or qty (If in case the entered qty varies).
Debit memo is an ordinary invoice.
Pl. reward if useful.
Regards,
Senthilkumar SD

Display group currency for debit and credit

Similar Messages

Maybe you are looking for