Company name not recorded in contact card
Hi,
When I edit a contact to add his/her company name, the name is not recorded when I click on the save button.
It's driving me bananas!
Any idea what's happening?
Thanks,
Sil
Well, in fact I restarted my Z30 and it seems to work now. (though I need to do some extensive tests)
But strangely, after the reboot, the two contacts I played with (my bank and my mechanics) had been removed, deleted from the contact list!
I also lost some other phone numbers for contacts who had two numbers.
I feel concerned that the contact list doesn't look very reliable...
Similar Messages
-
Double-clicking on Sender name to view full contact card
Just upgraded to Outlook 2013 with Lync 2013, and so far I hate it. In Outlook 2007, when I opened an email I could double-click on the sender's name and pull up its full contact card with all of the information that I had entered before, including
their picture or company logo. Now in the 2013 version, I get some light-weight pop-up showing some of the sender's info and either no picture or the picture that they included in Lync. Is there any way of restoring the full contact card? Also,
is there any way to get the Reading Pane to show by default the picture that I assigned to that contact?Hi,
When I click on the sender's name in an email, it opens the Outlook Properties dialog instead of the full contact editing form.
If you want to open the full Contact Form in Outlook 2013, you can click on the View Source link of the Contact Card, and click the source
Outlook (Contacts, your email address):
For more information, please refer:
http://www.msoutlook.info/question/727
Regards,
Steve Fan
TechNet Community Support -
Adding link to the photo and Name in the outlook contact card -Enterprise wide
How can I make the name and photo in the outlook contact card link to my profile page? I read articles where it is mentoined that the URL is set in Registry, currently my organization does not have any link associated with photo and name in contact card.
I want to implement this across the organization , any deployment or changes that I need to do to implement this across?
Appreciate if you can provide details on how this is done. The url will look like this:
https://www.produrl.com/userid={userid}
How can I dynamically add respective userid in the link?Appreciate your response on this.So you want to redesign the contact card in Outlook? Are you using SharePoint? If signed into sharepoint via the social connect, there is a link to the mysharepoint page under View source. I don't think you can change the link or customize the card,
beyond what is listed here:
http://technet.microsoft.com/en-us/library/ff631135(v=office.15).aspx#BKMK_ContactCards
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
Company Names Not Showing In Incoming Calls
Hi there.
Been loving my time with the Z10, but there is something that makes me crazy.
I have a lot of contacts, and a lot of them with the same name. One of the ways to see who is calling me was in my old BB9320 the company name of the caller.
In the Z10 i can't figure out why it isn't an option.
Is there any way to show the company name when someone is calling me?
ThanksI'm afraid not!
Could be a great new feature though.
If my post has helped you, give it a LIKE -
Names not appearing with contacts on iPhone 4 after adding iPad Mini
Yesterday we added my daughter's iPad Mini to my account, synced it up in iTunes and used the cloud. She deleted a bunch of my contacts from her iPad. Now they are not in my contact list on my phone. However, if I start to type a text I see their names but when I select the name and start typing, the name disappears and I only see their number. Also, if I look at my list of recent texts the names that sent them are all gone and just their numbers appear. Does anyone know how I can reconnect the names with the numbers and also restore my contact list? Thank you in advance!
Well I answered my own question. I just deactivated all the other accounts on my iPhone except iCloud, and all the duplicates disappeared. Before I did this, I merged duplciate cards on the MacBook Pro (from the Contacts Card menu selection). iCloud needs to be selected as the default account on all your devices, and it seems that other accounts need to be deactivated. Be careful - deactivating an account also erases entries associated with only that account.
-
Company Names excluded in searching Contacts in Phone App - Why?
Has anyone else had a problem with searching a company name through the Phone app Contacts search function? This seems like such a basic function to me, I was surprised. Calling for a cab, or local pharmacy shouldn't require Name Field be completed. It needs a fix for sure. Please advise if anyone knows if this is a bug, OS miss, or a unique issue with my Z10? Thanks!
Yes this is a known issue, as well as some other sorting and search issues within the contacts app. I have reported it, not sure if it made the bug list or not.
A work around for now is to use the universal search on the home page, it seems to search all of the fields. Then click the contact from there and choose how you wish to contact them by touching the options.
-: DrewRead :-
Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
"Like it" if you like it. -
Company Name not getting Displayed in the incoming screen
I changed my blackberry from earlier 0S 7 to Z10 two days ago, but to my surprise it is not displaying company name in the incoming call screen. I have more than 20 people whose name is repeating and not able to identify, how come this feature is not available in the new model, what is solution ?
@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay -
Merge iPhoto name with Address Book contact card?
I have a lot of pictures named on iPhoto under faces. But then I just put some contacts in my Address Book and I wanted to know if theres a way to merge the Faces name and the Contact Card. Or maybe if I can just rename all of the Faces at once under one person, and change them to the contact card name? P.S. I am currently running Snow Leopard. But i I need Lion for it, I will be biying it tomorrow anyways=) Thanks anyone who helps!:D
Oh wait! Nevermind! I found I can just rename it! I'm a little new to the Mac:P
-
Normalization rules seem to be used but ipPhone telephone number not appearing in contact cards
We keep our CUCM-style telephone numbers in the AD ipPhone attribute. The format is 000-0000.
I have added a normalization rule to Company_Phone_Number_Normalization_Rules.txt to make these E.164-ish and to add a prefix (3) that we use to route calls from Lync to CUCM.
Testing both with abserver.exe and observing a trace, the rule is being applied correctly.
args[1]: 824-2072
824-2072 -> tel:+38242072
Matching Rule in Company_Phone_Number_Normalization_Rules.txt on line 19
^(8\d{6})$
Component: ABServer
Function: Contact.AddAttribute
(ABServer,Contact.AddAttribute:contact.cs(317))(0000000036D00C4F)Id: 13 Name: ipPhone Value: tel:+38242072
However, I still don't see this +38242072 in the contact card. I tried looking in the rtcab.dbo.AbAttributeValue table and I also don't see any ipPhone (ID 13) values there.
I looked in absconfig.exe and the "Include phone number value that is currently present in AD for the phone attributes" option is selected (first choice).
Should I instead be using "Use normalization rules and include normalized number"?There are still a few folks where the numbers aren't being published as expected. To review, we have this normalization rule:
## Company_Phone_Number_Normalization_Rules.txt
## 824-2072 -> 3-8242072
(8\d{6})
3-$1
and these two users (LDIF format):
dn: CN=User with incorrect Lync contact data
telephoneNumber: +1 (123) 456-5009
otherTelephone: +1 (123) 456-5009
ipPhone: 810-5009
mobile: +1 (123) 533-5009
dn: CN=User with correct Lync contact data
telephoneNumber: +1 (123) 456-5034
otherTelephone: +1 (123) 456-5034
ipPhone: 810-5034
mobile: +1 (123) 533-5034
The "good" user ends up with this "other" attribute (as seen from a dbimpexp.exe dump:
<phone type="other">
<readOnly>true</readOnly><displayString>810-5034</displayString>
<uri>tel:3-8105034;phone-context=enterprise</uri>
</phone>
The "bad" user ends up with the E.164 number repeated.
<phone type="other">
<readOnly>true</readOnly>
<displayString>+1 (123) 456-5009</displayString>
<uri>tel:+11234565009</uri>
</phone>
Where else should I be looking to figure out this inconsistency? -
i have taken a copy of my TEST db called TEST and restored it to another db which had a company name of LIVE. Now the company name of my LIVE db shows TEST. I went to Company Details tab and made sure I changed the company name back to LIVE, but when I click on "Choose Company" it still shows my LIVE db with a name of TEST. How do i fix?
Nevermind. i just clicked refresh button on Choose company window and it updated the company name.
-
If I send files via Adobe Send, the recipient gets an email from "John Smith via Adobe Send." I want it to read as being from my company, not me personally, as in "Acme Services via Adobe Send." How do I make that change?
The name in the Adobe Send email is the name associated with your Adobe ID. You can change that by clicking on the triangle next to your name in the upper-right corner, and selecting My Information...
This will affect everywhere you use your Adobe ID. Note: we recommend not putting commas in either name. Some email clients (e.g., gmail) don't like commas in names, and so your recipients might see "Unknown Sender" or something like that. -
HT201239 "Card not added. contact card issuer" anyone have this issue
I repeatedly get this message when submitting my Wells Fargo debit Visa card. Spent hours on the phone with both Apple and Wells Fargo Tech support. They could not fix. I've gone as far as canceling my card number and getting an entirely new card number but to no avail. Please help.
First make sure you are using the latest drivers...
http://avid.force.com/pkb/articles/en_US/Download/Eleven-Rack-Drivers
However the latest ones are not yet confirmed as working to OS X 10.10.3 so you may need to wait for an update from Avid....
Test and see....
Note: It's always a good idea not to update OS X or Logic Pro until after you have checked if there are working drivers for your external hardware first.. especially, in my personal opinion... in the case of Avid hardware drivers which are know to lag behind in development.. -
Why don't my contacts sort the same way they are sorted in Outlook? We are a business, we need to sort by a company name not by contact name. Please help.
I don't work for Apple so I can't speak on their behalf as to their desire to infiltrate the business mobile market.
All I can do is tell you what the iPhone can and can not do and recommend work arounds for problems that you may be having. From what you have said, you require a feature that the iPhone does not support and the only work around is not satisfactory to you. Given that information, the iPhone is not a good fit for your business needs so you should look into a competing product.
No one product can be all things to all people. It is up to you to decide if having an iPhone is worth the sacrifices/work arounds necessary. -
Link to User's MySite on Lync 2013 Contact Card does not work
Hello,
we're running a sharepoint 2010 environment with a configured user profile service application and a mysite host. we're also running lync 2010 clients but are planning to upgrade to lync 2013. the it guys (including me) have already installed lync 2013 client.
the lync server is also already on 2013.
with the old 2010 lync client, it was possible to click on a name from a lync contact card and this directed to the users mysite, which was great. to archieve this, we updates the wwwHomepage attribute in AD with the corresponding link for each user to the
mysite.
now with lync 2013 it is no longer possible.
i couldn't find anything about this topic ...
any help would be highly appreciated
kind regards
MarcoI tested it in my lab.
The same result with your.
It is by design.
Lisa Zheng
TechNet Community Support -
"Conversations" sometimes shows own name, not name of callee
We are using Lync 2013 with the latest updates on servers and clients. Multiple users noticed that under "Conversations", some entries show their own name instead of the caller/callee name.
So, I called a colleague named, say, Susan. Under "Conversations" / "All" I see an entry with my own name. But when I move the mouse over the phone icon, I see Susan's picture. When I right-click my name and choose "See contact card,"
I see Susan's contact card.
It seems to happen usually with persons who are in our AD but are not using Enterprise Voice yet, that is, they are using a classic telephone.Hi,
Please update to the latest version for Lync server and Lync client from Microsoft Website and then test again:
http://technet.microsoft.com/en-us/lync/dn146015
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
What does the VPN function do for me?
I have a VPN function on my iphone what is it for?
-
Me too! Unable to connect to ITunes radio, yet internet and mail are working fine.
-
How tu use or install package API Toolkit BPC
Dear All,,, I have problem with performance SAP BPC, then i read SAP Note from SAP Support Portal. In that document, there are download API toolkit. I don't understand how to use this file (API Toolkit)...?? Any Idea..?? Thanks... Dharma Setiadi
-
Unexpected Quit using FX/Generators
Sometimes effect previews will show just a blue screen. If trying to apply any of these effects whilst they show this, FCPX will QUIT every time. In addition effects (Generators) can become this way if the effects are already applied, causing FCPX to
-
Someone else's photo showed up on my phone & my phone was always in my possession
How can someone else's photo show up on my phone? po My phone was always in my possesion.