Comparing whether a block of code is identical or not.

Hi,
I have got an issue where I am getting the correct output in Development server but when I pass the same data in Quality server, I encounter a short dump.
I have a doubt that there is a minor difference in the code. Is there any technique to compare whether both the codes are identical or not.
Regards.
Raja.

Hi Raja,
You can do a remote comparison of the programs from DEV to QA.it will show you the differences in the program. If that is not possible, then there is an third party tool available as NOTEPAD plus plus. You can try that out.
Regards,
Santanu.

Similar Messages

Atomic block of code in SwingWorker thread?

Hi,
I am coding a Swing application. It has a SwingWorker thread that can be interrupted by a Progress bar.
Inside the worker thread, there are a few lines of code (not a method) that should be executed all or none. In another word,
if the thread runs in the middle of this block, the thread must finish this block. How can this be accomplished? This block of code has nothing to do with database read/write. The reason for the block of code being atomic is that I need to make sure of data consistency. There are no other thread except for
the main thread(event-dispatch thread) and the worker thread.
Thanks a lot!
David

You need to synchronize your atomic block and the code to interrupt the thread on the same object.

If there is any function module to compare whether there is any digit

Dear all,
If there is any function module to compare whether there is any digit except 0 in a string.....pls provide me

Hi,
IYou can use the following logic i guess,
DATA: w_str TYPE string VALUE '00001'.
IF w_str CN '0'. "If there is a digit other than zero thjis is true
WRITE: / 'There are digits other than zero'.
ENDIF.
Hope this helps you.
Regards,
Manoj Kumar P

[Problem reading a file in a static block of code]

Hi all,
I'm trying to use a static block of code in an abstract class (let's say for initialisation). In this block I'm trying to read some lines of text from a file, and some FileNotFoundException are thrown,
java.io.FileNotFoundException: file:/home/tom/workspace/cryptanalysis/data/keys (No such file or directory)
java.io.FileNotFoundException: file:/home/tom/workspace/cryptanalysis/data/french_words (No such file or directory)
but all the paths are valid and the files exist as you can see:
tom@javahouse ~ $ ll /home/tom/workspace/cryptanalysis/data/
total 24K
-rw-r--r-- 1 tom users 151 jan 3 23:26 french_frequences
-rw-r--r-- 1 tom users 2,0K jan 4 17:21 french_texts
-rw-r--r-- 1 tom users 11K jan 4 17:16 french_words
-rw-r--r-- 1 tom users 159 jan 4 17:21 keys
tom@javahouse ~ $ cat /home/tom/workspace/cryptanalysis/data/french_words
LE
DE
UN
ETRE
ET
A
IL
AVOIR
NE
JE
SON
QUE
SE
QUI
CE
DANS
I really don't understand why those exceptions are thrown, if somebody
could help it would be very nice. (It is for a crypto school project)
Thanks in advance. (Sorry for my english 'cause I'm french)
Here is a code snippet :
// Path to this class:
// /home/tom/workspace/cryptanalysis/utils/TextUtils.java
public abstract class TextUtils {
     private static String PATH;
     public static String[] KEYS;
     public static String[] WORDS;
     public static String[] PLAINTEXTS;
     public static float[] FREQUENCES;
      * Init KEYS, WORDS, PLAINTEXTS, FREQUENCES, and PATH,
      * with the files in the data folder.
     static {
          String line;
          PATH = TextUtils.class.getResource("../data/").toString();
          System.out.println(PATH);
          // When PATH is printed, it looks like this /home/tom/workspace/cryptanalysis/data/
          KEYS = FileUtils.readFileContent(PATH + "keys"); // Here is the first exception
          WORDS = FileUtils.readFileContent(PATH + "french_words");// Here is the second
          PLAINTEXTS = FileUtils.readFileContent(PATH + "french_texts");// Here is the third
          FREQUENCES = new float['['];
          try {
               BufferedReader reader = new BufferedReader(new FileReader(PATH + "french_frequences"));// And the fourth
               while(null != (line = reader.readLine()))
                    FREQUENCES[line.charAt(0)] += Float.parseFloat(line.substring(1));
          } catch (Exception e) {e.printStackTrace();}
// Path to this class:
// /home/tom/workspace/cryptanalysis/utils/FileUtils.java
public abstract class FileUtils {
      * Read the content of the file denoted by the given path and
      * return an array of Strings containing each line.
      * @param path
      * @return an array containing all the lines from the file
     public static String[] readFileContent(String path) {
          try {
               String line;
               Vector container = new Vector(100, 100);
               System.out.println(path);
               BufferedReader reader = new BufferedReader(new FileReader(path));
               while(null != (line = reader.readLine()))
                    container.add(line);
               return (String[])container.toArray(new String[container.size()]);
          }catch(Exception e) {e.printStackTrace();return null;}
     ....

vous �tes le type bienvenu
(thats bablefish for "you're welcome dude")Wow! That means "vous �tes bienvenu" means "You are welcome here" (i.e., "welcome at the forum", or whatever), not the proper answer to "Thank you".
The shortest form of "You're welcome" in the sense you intended it is "De rien". [literally, "of nothing"--so it would be something like if you said in English, "It was nothing."]

TCCD: Unable to verify code signing identity. What does is it mean?

Hi,
I can't recall if I encountered these issue earlier but today when I opened console I noticed these messages popping up while launching iWork apps simultaneously. It's the old problems that plugged me even before I did clean reinstall of my OS: when launching these apps I don't see windows opened or see only some of them. Just dock indicators. I have to hit the icons again to invoke the windows.
Here's the full entry:
tccd: unable to verify code signing identity of com.apple.iWork.pages
tccd: unable to verify code signing identity of com.apple.iWork.numbers
tccd: unable to verify the code signing identity of com.apple.iWork.keynote
Any ideas what is it all about?
Also, this issue often accompanied by the following entries:
com.apple.IconServicesAgent[226]: main Failed to composit image for binding VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: numbers, UTI: com.apple.iwork.numbers.numbers, fileType: ????.
com.apple.IconServicesAgent[226]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/com.a pple.appkit.xpc.openAndSavePanelService.xpc
Kindest regards,
I.S.

jessicalouisexo wrote:
why does app store keep telling me to verify my payment info help please
Why do you not wish to Verify your payment details...?

Console log entry: unable to verify code signing identity

Hi,
I can't recall if I encountered these issue earlier but today when I opened console I noticed these messages popping up while launching iWork apps simultaneously. It's the old problems that plugged me even before I did clean reinstall of my OS: when launching these apps I don't see windows opened or see only some of them. Just dock indicators. I have to hit the icons again to invoke the windows.
Here's the full entry:
tccd: unable to verify code signing identity of com.apple.iWork.pages
tccd: unable to verify code signing identity of com.apple.iWork.numbers
tccd: unable to verify the code signing identity of com.apple.iWork.keynote
Any ideas what is it all about?
I often run secure empty trash if it's of any value to mention.
Kindest regards,
I.S.

Hi,
I can't recall if I encountered these issue earlier but today when I opened console I noticed these messages popping up while launching iWork apps simultaneously. It's the old problems that plugged me even before I did clean reinstall of my OS: when launching these apps I don't see windows opened or see only some of them. Just dock indicators. I have to hit the icons again to invoke the windows.
Here's the full entry:
tccd: unable to verify code signing identity of com.apple.iWork.pages
tccd: unable to verify code signing identity of com.apple.iWork.numbers
tccd: unable to verify the code signing identity of com.apple.iWork.keynote
Any ideas what is it all about?
I often run secure empty trash if it's of any value to mention.
Kindest regards,
I.S.

Firefox keeps blocking my ability to read emails using chtah. It doesn't start like this but it eventually blocks the code. this interferes with my email.

Firefox blocks the code CHTAH, which is used by many of my email contacts to load pictures. This is not something that happens right away but over time. I need to delete Firefox and all saved information and reload the software in order to read my email. This has happened with several versions of Firefox and several versions of antivirus products.

Reset the zoom level for each of those websites. <br />
See this: https://support.mozilla.com/en-US/kb/Page+Zoom
If you hold the Ctrl key and use the scroll wheel to move down the page, you will changed the zoom level of that domain.
The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Siri make calls even when Iphone is blocked by code...

I have discover a situation using Siri: when Iphone is blocked by code, if you pres the main button to activare Siri, she is activated and you can ask to make a phone call and she is doing. Normaly she has to ask for unblock code like for photos....

Well that was a bust. He was very polite and searched their databases for about five minutes (before taking my credit card info). He came back and said there are a lot of incidents that mention this problem, but there were no solutions. He apologized and said there does not appear to be a solution. He suggested it might be corrected in a future update. I'll keep looking and let you know if I find anything.

CodeSign error: no certificate found in keychain for code signing identity

I've been wrestling with this for a week. Can someone help. I have followed the instructions closely to get my iphone app ready for distribution, but I cannot compile my app due to the following error:
CodeSign error: no certificate found in keychain for code signing identity 'iPhone Distribution: iPhone Developer (my name)
However, it definitely is there. In my Keychain I see the proper certificate. Furthermore, in the build file my Code Signing Identity -> Any iPhone OS Device is set to iPhone Distribution: (my name) but under "Code Signing Provisioning Profile" there are no valid choices. The distribution certificate is grayed out.
Any help/advice would be greatly appreciated!!

For the build error, "codesign error: code signing identity 'iphone developer' does not match any code-signing certificate in your keychain":
1) Open Keychain Access application.
2) Select the "Systems" tab under the Keychains sidebar and "certificates" under the Categories sidebar.
3) You should see the "com.apple.kerberos.kdc" and/or "com.apple.systemdefault" certificates with a red x in the icon.
4) Double click them and under the "trust" node change the "When using this certificate: " tab to Always Trust. You may need to restart Xcode for this to work.

How can I correct this error: no matching code signing identity found

I signed up as an apple developer so I could download the tools to learn to build apps. I just installed Xcode 5.1.1, when i opened the program and created my first test project I got an error message: "no matching code signing identity found". how can i get rid of (correct) this error? I am just learning and I am not ready to join the $99 developer program yet.

Try setting Signing to None in the Target General pane.

No code siging identity found

I am building a project which targets iphone/ipad using xcode 5 . When i build this project, it says
No matching signing identity found No signing identities (i.e. certificate and private key pair) matching the value specified in your build settings, "Mac Developer:", were found. Xcode can update your build settings to their recommended values.
When i click fix issue button it says The selected team doesn't have a Mac Developer Program membership Select a team with a Mac Developer Program membership and try again. I only an iOS developer program membership through my university, no mac membership.
I've change the Code Signing Identity in Build Settings Tab, and tried a lot of solutions propsed on stackoverflow ,but the issue still exist.
How can i fix this issue?
Any help would be much appreciated.
Thank you

You will probably get better answers to questions like these in the developer forums. https://developer.apple.com/devforums/
Best of luck.

No matching code signing identity found - Xcode error

Hello,
I am new to Mac and Xcode. I just want to learn Xcode and not publish any apps. Hence I did not enroll in the paid developer program.
Whenever I try to create a project in Xcode, it gives me this error - "No matching code signing identity found". If I click on "Fix Issue", it asks me to add my apple ID. I did that but I cannot add it to any team. I also tried requesting a certificate through keychain. But I am not sure on how to check the status of that.
Please pardon my lack of knowledge on this as I just a beginner. But any help on this will be greatly appreciated.
Thank you.

You will probably get better answers to questions like these in the developer forums. https://developer.apple.com/devforums/
Best of luck.

Valid code signing identity not found

hi guys,
I have my mac working perfectly with my device using my dev cert (for development purposes not the distribution) and provisioning profile. I can install my apps. But if i'm using another mac, it can't find the valid code signing identity, when I'm installing the same cert and provisioning profile. What should I do to make it install in different machines? is that possible? Please help and tell me what to do. Thank you.

See TN 2250 / Transferring Your Identities

How to block material code

hello all ,
i want to know about how to block or delete material code .

Hi,
Am adding up..
You can set the material status by using this path
IMG Path: Logistics General -> Material Master -> Settings for Key Fields -> Define Material Statuses.
Please refer the below link...
block material code
Thanks.

Block T-code

Hi all,
How block T-Code authorization.
Advance thanks
BR
Jack

Dear,
Which T .Code you wnat to block?
You want to block the user authorisation for T.Code then you can do through PFCG T-code. In PFCG authorization tab we neeed to maintain .
SU21 - Authorization object.
Please check this link,
[T-Code authorization|Authorization Code]
Regards,
R.Brahmankar

Comparing whether a block of code is identical or not.

Similar Messages

Maybe you are looking for