No code siging identity found

I am building a project which targets iphone/ipad using xcode 5 . When i build this project, it says
No matching signing identity found No signing identities (i.e. certificate and private key pair) matching the value specified in your build settings, "Mac Developer:", were found. Xcode can update your build settings to their recommended values.
When i click fix issue button it says The selected team doesn't have a Mac Developer Program membership Select a team with a Mac Developer Program membership and try again. I only an iOS developer program membership through my university, no mac membership.
I've change the Code Signing Identity in Build Settings Tab, and tried a lot of solutions propsed on stackoverflow ,but the issue still exist.
How can i fix this issue?
Any help would be much appreciated.
Thank you

You will probably get better answers to questions like these in the developer forums. https://developer.apple.com/devforums/
Best of luck.

Similar Messages

How can I correct this error: no matching code signing identity found

I signed up as an apple developer so I could download the tools to learn to build apps. I just installed Xcode 5.1.1, when i opened the program and created my first test project I got an error message: "no matching code signing identity found". how can i get rid of (correct) this error? I am just learning and I am not ready to join the $99 developer program yet.

Try setting Signing to None in the Target General pane.

No matching code signing identity found - Xcode error

Hello,
I am new to Mac and Xcode. I just want to learn Xcode and not publish any apps. Hence I did not enroll in the paid developer program.
Whenever I try to create a project in Xcode, it gives me this error - "No matching code signing identity found". If I click on "Fix Issue", it asks me to add my apple ID. I did that but I cannot add it to any team. I also tried requesting a certificate through keychain. But I am not sure on how to check the status of that.
Please pardon my lack of knowledge on this as I just a beginner. But any help on this will be greatly appreciated.
Thank you.

You will probably get better answers to questions like these in the developer forums. https://developer.apple.com/devforums/
Best of luck.

CodeSign error: no certificate found in keychain for code signing identity

I've been wrestling with this for a week. Can someone help. I have followed the instructions closely to get my iphone app ready for distribution, but I cannot compile my app due to the following error:
CodeSign error: no certificate found in keychain for code signing identity 'iPhone Distribution: iPhone Developer (my name)
However, it definitely is there. In my Keychain I see the proper certificate. Furthermore, in the build file my Code Signing Identity -> Any iPhone OS Device is set to iPhone Distribution: (my name) but under "Code Signing Provisioning Profile" there are no valid choices. The distribution certificate is grayed out.
Any help/advice would be greatly appreciated!!

For the build error, "codesign error: code signing identity 'iphone developer' does not match any code-signing certificate in your keychain":
1) Open Keychain Access application.
2) Select the "Systems" tab under the Keychains sidebar and "certificates" under the Categories sidebar.
3) You should see the "com.apple.kerberos.kdc" and/or "com.apple.systemdefault" certificates with a red x in the icon.
4) Double click them and under the "trust" node change the "When using this certificate: " tab to Always Trust. You may need to restart Xcode for this to work.

"no identity found" error when code signing

Hello,
I am trying to codesign an iPad IPA file supplied to me be an external app development agency. To carry out the app signing, I first installed the distribution cert and private key (.p12 file) in to Keychain. I also installed the intermediate WWDRCA cert and the ios_development cert. I'm using the following command from the iOS terminal to sign my app:
codesign -f -s ituneskey.p12 AppName.ipa
and the error I get is :
ituneskey.p12: no identity found
My distributuon cert is valid, I have checked this in Keychain Util.
What am I doing wrong and how can I resolve this?

Hi K T,
I had previously gone through the two links you mentioned before posting to this forum, but to no avail. I have a couple of theories. One is that because the developer who wrote the app is not part of my companies "Team" in our iOS developer account, he used his own developer certificate to create the app. Now the problem is when we come to signing the app with our distribution certificate, which by the way now works (see below), when validating the archive during upload it fails.
The reason why codesign was not working as previously stated in my original post was because I was using the wrong identity? The command I used was:
codesign -f -s ituneskey.p12 AppName.ipa
However I should have been using the following:
codesign -f -s [Valid Identity Here] AppName.ipa
where [Valid Identity Here] is replaced with the identity used in our developer account and distribution certificate.
I've got that bit working, but now when I use Organiser to either Validate or Distribute the archive I get the following error:
Application failed codesign verification. The signature was invalid, contains disallowed entitlements, or it was not signed with an iPhone Distribution Certificate.
I then went on to read the following post:
http://oleb.net/blog/2011/06/code-signing-changes-in-xcode-4/
In this post I noted a section where it states :
Update: Colin Humber, developer at TestFlight, made me aware of a potential problem with this approach. Apparently, the App ID of the provisioning profile that is used for building the app is hardcoded into the binary during the build process. If you later resign the app with a provisioning profile that belongs to different App ID, the one in the binary will no longer match the provisioning profile’s App ID since the binary will not be recompiled. This can cause all sorts of problems with services that rely on the App ID, such as access to the keychain, Push Notifications, or In-App Purchasing.
This issue will not affect you as long as you use your default “wildcard” App ID (the one that looks like1234567890.*). But if you use a separate concrete App ID to publish your app on the App Store, you have to make sure to build your app with a provisioning profile that uses the same App ID. You should not use your default Team Provisioning Profile for release builds in that case. Thanks for the heads-up Colin!
And since we DO USE a unique AppID per app I think this is the reason why Validation is failing and I'm getting the above stated new error.
Is the solution therefore to add the developer to our developer Team and get him to use our AppID when building the app?

Valid code signing identity not found

hi guys,
I have my mac working perfectly with my device using my dev cert (for development purposes not the distribution) and provisioning profile. I can install my apps. But if i'm using another mac, it can't find the valid code signing identity, when I'm installing the same cert and provisioning profile. What should I do to make it install in different machines? is that possible? Please help and tell me what to do. Thank you.

See TN 2250 / Transferring Your Identities

Xcode Problem 'No signing identity found' how to fix?

Hi, I am in no way a developer, I just use XCode to compile some applications I use where the latest releases are only available as source code.
Until now I have not had any issue compiling these applications.
However, just recently when trying to compile Boxer from http://www.boxerapp.com/ I am presented with an error that states:
No signing identity found
I do not wish to codesign someone elses' application with my own nonexistent signing identity. Can this pointless function be bypassed so I can build the app sucessfully?

Have you looked in the build settings to see if Don;t Code Sign is selected?

Received HTTP response code 404 : Not Found

I am attempting to pass a file through XI into an IDoc to ECC. I have tested the mapping, and that works fine. I have also tested the configuration in the integration builder and it seems to be fine. However, when the file is picked up by XI from the directory, processed by XI, and then sent to ECC, an error occurs in the runtime workbench:
Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
The error leads me to believe that the system cannot be found, or there is a privelage issue with the service user attempting to log onto ECC. However I believe I have set up the RFC connection correctly, and the service user should be fine.
Does anyone know what may be causing this? I am using the IDoc adapter for the reciever communication channel. I have set the RFC destination (and tested it in SM59, works fine) and the port (I assume this is the port in WE21?). Not sure where to look...

Being that the error says:
Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
I am trying to understand what this means. Can anyone explain to me why the message is getting sent to this address? I assume that the AFW is coming into play because I am using the IDoc adapter, hence the adapter framework. Is this true? Should the AFW be showing up, or do you think there is another issue?
Mainly I want to know if this is more of a basis issue, or a configuration problem with the interface in XI?

I purchased a digital itunes giftcard through paypal but can't seem to find a 'code' to use to redeem the card. Could someone help me find where that code would be found? I can see the paypal transaction details.

I purchased a digital itunes giftcard through paypal but can't seem to find a 'code' to use to redeem the card. Could someone help me find where that code would be found? I can see the paypal transaction details. jgm22

-> iTunes Cards & Codes

Comparing whether a block of code is identical or not.

Hi,
I have got an issue where I am getting the correct output in Development server but when I pass the same data in Quality server, I encounter a short dump.
I have a doubt that there is a minor difference in the code. Is there any technique to compare whether both the codes are identical or not.
Regards.
Raja.

Hi Raja,
You can do a remote comparison of the programs from DEV to QA.it will show you the differences in the program. If that is not possible, then there is an third party tool available as NOTEPAD plus plus. You can try that out.
Regards,
Santanu.

Java.rmi.RemoteException: HTTP Status-Code 404 Not Found securesimple/Ping

Hello!
I'm testing interop and simple application for JWSDP and I get the following error in the context:
build-client:
run-sample:
[echo] Running the simple.TestClient program....
[java] Service URL=http://localhost:8080/securesimple/Ping
[java] Nov 4, 2004 1:31:54 PM com.sun.xml.wss.filter.DumpFilter process
[java] INFO: ==== Sending Message Start ====
[java] <?xml version="1.0" encoding="UTF-8"?>
[java] <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/".............
[java] </env:Body>
[java] </env:Envelope>
[java] ==== Sending Message End ====
So, after the client has send the message this error occurs:
[java] java.rmi.RemoteException: HTTP Status-Code 404: Not Found - /secures
imple/Ping; nested exception is:
[java] HTTP Status-Code 404: Not Found - /securesimple/Ping
[java] at simple.PingPort_Stub.ping(PingPort_Stub.java:96)
[java] at simple.TestClient.main(TestClient.java:37)
[java] Caused by: HTTP Status-Code 404: Not Found - /securesimple/Ping
[java] at com.sun.xml.rpc.client.http.HttpClientTransport.checkResponse
Code(HttpClientTransport.java:302)
[java] at com.sun.xml.rpc.client.http.HttpClientTransport.connectForRes
ponse(HttpClientTransport.java:252)
[java] at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpCl
ientTransport.java:88)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:92)
[java] at simple.PingPort_Stub.ping(PingPort_Stub.java:80)
[java] ... 1 more
[java] Exception in thread "main"
[java] Java Result: 1
The application is running on localhost in a local network, so for accesing internet we're using a proxy. For this we tried to set up the proxy configuration and still the same error. We've also unplugged the network cable but it didn't help.
We've done all the neccesary settings and we're using "org.bouncycastle.jce.provider.BouncyCastleProvider " as a JCE provider.
Thank you!

Just a guess, but if this is a secure web service shouldn't you be trying to connect to it using SSL? e.g.
https://localhost:443/securesimple/Ping
Have you tried hitting the web service via your browser and appending the ?WSDL to the URL
http://localhost:8080/securesimple/Ping?WSDL
https://localhost:443/securesimple/Ping?WSDL
Can you telnet to http://localhost:8080

Help: Received HTTP response code 404 : Not Found

Transmitting the message to endpoint http://chmsxd42:52200/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
Our senario is a simple file transfer one, no object has been created in IR.
While we run the wizard, we just put the dummy interface name and namespace in the interface and namespace blanks.
After we activate the objects, the source files were picked up and deleted but there is no file created in the target directory, and we got the error message listed at the top.
Does anyone has some clue about this? Please help.
Thanks a lot.
Aditya Babu

Hi,
The port of Integration Engine is 80XX, and so 8001.
In the SLD you must to select the Business System of XI and there you can just set the corret Pipeline URL.
It means you AE is unable to communicate with IE.
t-code SMICM..check the HTTP port No:
open the SMICM code...just right click anywhere in the window...then click on the Services..it will show u the HTTP and HTTPs port no.
THen from SLD --Business Landscape --your Business System..chek the Pipeline URL http://<host>:<port>/sap/xi/engine?type=entry
the HTTP port that u will see in the SMICM should be same in the pipeline URL
Have you checked this one,...
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Go through this link which as the information of all HTTP errors in XI
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Thanks
Vikranth

'HTTP Code 404 : Not Found' in SE80

Hi,
I have consumed WSDL using consumer proxy in SAP system. Now I am trying to test this proxy.
But, getting error
Error when calling SOAP Runtime functions: SRT: Unsupported xstream found:
("HTTP Code 404 : Not Found")
I have maintained correct URL and port, computer name in SOAMANAGER, still I am getting this error.
Please advice.
Regards,
Sneha Nikam

Hi Sneha,
Please check if you created logical port in SOAMANAGER and same logical port is used in the proxy class.
please also check below discussion
Re: Error when Consuming Service in ABAP
regards,
Harish

Cannot download WSDL from .....Invalid Response Code: (404) Not Found.

Hi expert,
hcb-msap59 (PI system) & hcb-msap49 (ecc system)
When I try calling the ws navigator with this wsdl: http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101
it gives error :
Cannot download WSDL from http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101: Invalid Response Code: (404) Not Found. The request URL was:"http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101". Check, whether the URL is correct, and the Web Service that you are requesting is up and running
In http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/webdynpro/sap/appl_soap_management?sap-language=EN and go to technical configuration, system global settings, access information j2ee server, the hostname and port is of PI system.
Any idea why Im getting the error? If I click on http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101 the sire is opening.
Any idea why I cant open it from ws navigator of my PI system?
Thanks.
Regards,
Thava

Hi,
Can you access that URL when you paste it into your browser? You don't need to configure system global settings unless you want to go to PI's navigator automatically - you can always copy & paste the link after opening the wsnavigator in PI yourself as well. If you can access the link, kindly check your network & proxy setup.
Regards,
Gokhan

Error: CIM_ERR_FAILED: HTTP response code: 404 Not found

Hi, we had finished to install Sap Netweaver Usage type PI (Abap +Java), now we are running Post Installation task, but we are getting an error when we ran "Configuration Wizard"
In the step: Configure the integration server for sld
Error: CIM_ERR_FAILED: HTTP response code: 404 Not found
Any Idea?
Thanks
Elias Mendoza
The following lines are part of the error log:
Debug Events
InvokeService:Configure the integration server for sld
Library: sap.com/tclmctctemplateslevel1_4_tcc
SourcePath ./PIPostInstallProcess/configureIntegrationServer8
Time 2008/07/07 at 20:47:33
WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
Execute Java Service
Library:sap.com/tclmctcutilbasic_ear
Class:com.sap.ctc.util.SLDConfig
Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
InvokeService- Result: Failed
Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException

Dear
Possibly CIM content is not uploaded to your SLD.
Is your SLD running properly ?
Did you install this SLD as a local SLD at the installation of your SAP system (along with other stuff using sapinst) ?
<removed_by_moderator>
Kind regards
Tom
Edited by: Julius Bussche on Jul 8, 2008 1:55 PM

No code siging identity found

Similar Messages

Maybe you are looking for