Complete code to send an attachment with a text message using java mailapi

complete code to send an attachment with a text message using java mailapi
code should be free from error

http://java.sun.com/products/javamail/FAQ.html#examples
Was this code too hard to find?
Was the FAQ too hard to find?

Similar Messages

IIneed code to send & receive mails to MS OutLook Express using java

Hi Friends,
Please help me in the following area..
I need code to send and receive mails and attachments to MicoSoft OutLookExpress in java,
please give me the steps and entire code. Thanks In advance
Thanks & Regards
Kiran
[email protected]

Hi Masijade,
Thanks for your replay,
i found 1 solution at http://www.javacommerce.com/displaypage.jsp?name=javamail.sql&id=18274
but where he asked us to include class files from the follwing 2 links :
1. Javasoft's JavaMail class files which can be downloaded from
http://www.javasoft.com/products/javamail/index.html
2. JavaBeansTM Activation Framework extension or JAF (javax.activation). It is available at http://java.sun.com/beans/glasgow/jaf.html..
the problem is i am unable to download class files from 1st link. where i down loaded JAF1.1.1. jar file from 2nd link,
can you assist on this toppic please and where can we finf java mail class files.
Thanks & Regards
Kiran
[email protected]

I have one contact that i have been texting for months. About 5 hours ago, when I send a text I get an error message that the text couldnt be sent. However, when I send a picture with a text message, then it goes through to the contact. Why am I getting

I have one contact that I've been texting for months, about 5 hours ago, I started receiving an error that the text was not sent. However, if I text a picture and then text with the picture the message goes through. Why am I getting this error?

You can also try out few things >
1) check if the ipod constantly appears in mycomputer section .
- if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
you can try
http://docs.info.apple.com/article.html?artnum=304508
The best way to check whether the ipod is faulty or the computer is creating the problem is,
connect the ipod to a different computer which has itunes on it(If possible)

Sending an attachment with an e-mail

Does anyone know how to send an attachment with an e-mail
using a
form page that is on our web site? I am using the TYPE
attribute of
the form tag as "File" to get the file I want to attach to
the e-
mail. Below is the code I have. The first page is where the
user can
click the browse button to search for a file to attach. The
second
page is where the e-mail should be sent to. Thanks for your
help.
Andy

Ian,
Do we have to set a folder up on our cold fusion server or do
we just
make a folder under our web site so when a user clicks on the
browse
menu, the file they attach has to be saved to our server
first and then
I can attach the saved file to an e-mail? How do we create
this folder?
Does it have to be an FTP site or just a folder on our web
site? How do
we make the permissions work correctly since a folder under
our web site
is not writable to except by the web editors that work here?
Please let
me know what I can do to get this to work. Thanks.
Andy
You can use any folder on the CF server or any system to
which it has
access. By default the CF service runs as a localsystem user,
so would
generally only have access to the local server file system.
This is
determined in the Services panel on window systems, I'm not
sure how it
works for other OS's.
If you are talking about the "Browse" button that is
displayed in the
web page for the <input type="file" ..> that does not
browse the server,
it browses the local user's system. You do not and can not
influence
this in any way. When a user selects a file from their system
and
submits the form, the file is uploaded to the webserver
through the HTTP
response header or URL query string, depending on whether the
form is a
post or get form.
You then use the <cffile action="upload" ...> tag on
the form's action
page to get the file from the web server and write it to a
location you
define the "file" parameter of the flag. This file system
access is
done under the permissions of the ColdFusion server, again
'LocalSystem'
by default.
You can then use this newly saved file in you <cfmailparam
...> tag to
attach it to an email. After this if you like you can use a
<cffile
action="delete" ...> to remove the file.

When I send a photo via a text message...

When I send a picuture via a text message using my iPhone 5, the text message contains all the photos that I have sent/received from a particular person. Is there a way to stop this so that I only send one picture at a time? I do not think I should have to send a text message that contains multiple pictures every time I send a picture to that same person.

Hello and thank you for using the Palm Help Forums!
Well, there are several things that can cause the device to reset.
One, corrupted data. If you have corrupted data on the device, when trying to access it, it can and most likely will, cause the device to reset.
Two, Low memory. If the device has low memory, the device will operate slow and most likely reset because it doesn't have a lot of free space. The free space remaining on the device is it's thinking room you could say. The smaller the thinking margin, the more likely it will not perfrom correctly. Best way to fix memory issues is to get an SD card and save all media files to the SD card.
Three, incompatible software. If there is incompatible 3rd party programs installed on the device this can cause several problems. Resets, missing data, and other functions not performing correctly.
The best thing I can recommend you do is a hard reset. A hard reset will erase all data on the device but restore all settings to default. Be sure to backup your data on a PC before performing a hard reset. For further information and instructions on how to do a hard reset go to kb.palm.com and look up article number 42094 in the solution ID search field.
I hope this helps and let me know if you have any further questions or issues.
-Pat
Post relates to: Treo 800w (Sprint)

I have Mac os x 106. When I try to send an attachment with email it won't send. Please could someone help? Thank you.

I have a Mac OS X 10.6 When I try to send an attachment with email it won't send - keeps saying 'fail'. Please could someone help? Thank you.

Hi lllaass! I replied to your post with the information you required but haven't heard from you since. If you don't, or can't help any further please would you let me know. Thanks.

How to send a mail with rich text content like using outlook

Hi All. I have a serious problem. When we send the mail from
outlook express or yahoo, we can send the mail with the text appearing
in the mail with bold font , with different colors, underlined etc.
If i type this kind of text in any word processor and mail that content through java mail then the message should be received by the recepient with all that bold,color and underlines etc as it is. Can anybody please help me in this case ASAP.

Go to this site and download the htmlArea Javascripts. Embedd them in your HTML and it will turn your normal HTML Text Area into Rich Text Area. Your real code will include all HTML tags. For example if you select some text and make it bold , the real HTML output will look like <B>YOUR TEXT </B>. So i guess your recipient should be able to receive HTML contents.
http://www.interactivetools.com/products/htmlarea/

Can't send photos with a text message

Every time I try to send a photo from my Camera Roll with a text message it thinks about it for an interminable time then drops leaving an exclamation mark next to the message. It used to be ok but stopped about a week ago. Any ideas anyone?

You're not alone! I have been searching for resolving this problem but I still have the problem.
Things you might want to check is that MMS is "on". Get to this by settings- messaging.
Check that "cellular data" is on.
try to power the iPhone off for a few minutes, then turn back on.
The only thing I have not tried is to reset the network. What I have read is that it wil not affect contacts, media, music. Tap settings- general, then scroll to the botton and tap reset, then tap reset network settings.
I alo wanted to mention that I have no problem sending a photo in an sms/mms message to other ios devices. The photo and text goes through. It's just with other reciepients that have a different device.
I also have Verizon as the carrier and I tried the *228 to program. My phone is also supplied by an enterprise, my work, and reading this Apple troubleshooting, the APN (access network), could have something to do with it on the settings or configuration of the server.
Message was edited by: jerryfromfirestone

TS2755 last nite i updated my iphone 4s with telus to 7.0.4 now i cannot send or get pictures thru text messages

Last nite i updated iphone 4s to 7.0.4 with telus in canada now i cannot send or get pictures thru texts messages??????

Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. DONT CONNECT YOUR DEVICE TO A COMPUTER.
then try it again

HT6154 Why can I not send a picture with a text on my iPhone or send a msg to two folks that are on my address book?

Why can I not send a picture with a text on my iPhone or send a msg to two folks that are on my address book?

No clue. you didn't tell us what happens when you try...

Problem in sending messages using java mail api

Hi All,
I have a problem in sending messages via java mail api.
MimeMessage message = new MimeMessage(session);
String bodyContent = "ñSunJava";
message.setText (bodyContent,"utf-8");using the above code its not possible for me to send the attachment. if i am using the below code means special characters like ñ gets removed or changed into some other characters.
MimeBodyPart messagePart = new MimeBodyPart();
            messagePart.setText(bodyText);
            // Set the email attachment file
            MimeBodyPart attachmentPart = new MimeBodyPart();
            FileDataSource fileDataSource = new FileDataSource("C:/sunjava.txt") {
                public String getContentType() {
                    return "application/octet-stream";
            attachmentPart.setDataHandler(new DataHandler(fileDataSource));
            attachmentPart.setFileName(filename);
            Multipart multipart = new MimeMultipart();
            multipart.addBodyPart(messagePart);
            multipart.addBodyPart(attachmentPart);
            message.setContent(multipart);
            Transport.send(message);is there any way to send the file attachment with the body message without using MultiPart java class.

Taken pretty much straight out of the Javamail examples the following works for me (mail read using Thunderbird)        // Define message
        Message message = new MimeMessage(session);
        message.setFrom(new InternetAddress(from));
        // Set the 'to' address
        for (int i = 0; i < to.length; i++)
            message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
// Set the 'cc' address
for (int i = 0; i < cc.length; i++)
message.addRecipient(Message.RecipientType.CC, new InternetAddress(cc[i]));
// Set the 'bcc' address
for (int i = 0; i < bcc.length; i++)
message.addRecipient(Message.RecipientType.BCC, new InternetAddress(bcc[i]));
message.setSubject("JavaMail With Attachment");
// Create the message part
BodyPart messageBodyPart = new MimeBodyPart();
// Fill the message
messageBodyPart.setText("Here's the file ñSunJava");
// Create a Multipart
Multipart multipart = new MimeMultipart();
// Add part one
multipart.addBodyPart(messageBodyPart);
// Part two is attachment
for (int count = 0; count < 5; count++)
String filename = "hello" + count + ".txt";
String fileContent = " ñSunJava - Now is the time for all good men to come to the aid of the party " + count + " \n";
// Create another body part
BodyPart attachementBodyPart = new MimeBodyPart();
// Get the attachment
DataSource source = new StringDataSource(fileContent, filename);
// Set the data handler to this attachment
attachementBodyPart.setDataHandler(new DataHandler(source));
// Set the filename
attachementBodyPart.setFileName(filename);
// Add this part
multipart.addBodyPart(attachementBodyPart);
// Put parts in message
message.setContent(multipart);
// Send the message
Transport.send(message);

Since upgrading to iOS 6 I can no longer send pictures as attachments to text messages, why?

I upgraded to iOS6 and can no longer attach photos to text messages, why would that be? Also since upgrading I find that the Personal Hotspot on my iPhone 4s is now grayed out. Is this something to to with the upgrade or what? I am really frustrated by the glitches with this new iOS. It is very un-Apple like.

I recommend taking it into the store. Sounds to me like you have downloaded an app that has allowed itself to become the "primary" when sending and recieving images.... Apple is seriously dropping the ball!! Just the other day, I downloaded an app called v-downloader... Its an app that allows you to download videos through a 3rd party browser. Well what it did, was automatically place restrictions on my phone... I couldnt send pics, and it removed access to safari, facetime, messages, etc... so maybe try removing any recent app purchases. Also, I would reccomend that you restore your phone. it will redo the update off your computer and come through with less glitches
But I agree, iOS6 has been nothing but problems... I plan on removing the update when I get home

Cannot send photo or contact as text message

Running the newest update 8.1 (10/22/2014) on a iPhone 5S. I STILL cannot share a contact via text message. I STILL cannot send a photo as a text message when I select a photo directly from my camera roll/photo albums. I can send a photo in an EMAIL directly from the camera roll/photo albums, but not in a text message. I can start a text message and then click on the camera icon and attach the photo. I haven't been able to do this since iOS 8 came out.
Sharing a contact and a photo via text messages were things I could do with iOS 7. Anyone else having this problem?

With iOS 7 you would open your camera roll or album, select the photo you wanted, click on send as a message, then it would take you to the text screen where you could see the photo being sent as it asked you for the recipient's phone. Now when I click on send as a message it takes me to the text screen, but as you can see, the photo is not attached. Same thing with a contact…I can click on "share contact as a text message" but when it takes me to the text screen, nothing is attached.

Send Photo from camera in text message

If I try to attach a photo to a text message, it appears in the message but then I get a notification saying"cannot send try again". Can you please tell me how I can send a photo in a text message. Thank you.

Hi @Selbeep ,
All the Nokia phones I have used will scale the images automatically to be within the accepted MMS limits.
Please first clear all messages stuck in the outbox, then try to send a picture to yourself?
A restart of the phone is also required after altering the settings.
The above should also be completed if the provider helped you set up the phone, but it is all that I can think of.
Hans

Having trouble with creation of a cloud service with multiple virtual machines using java sdk.

I am creating a cloud service on azure with 2 virtual machines using java sdk API. Service created successfully.
My input endpoint details are as follows.
INPUT ENDPOINTS
Head : 191.238.144.47:2400
Head : 191.238.144.47:22
Node0 : 191.238.144.47:43211
For Head instance port 2400 is for HTTPS and port 22 is for SSH and for Node0 instance port 43211 is for SSH.
But I am having problem with doing a ssh on Head instance. Sometimes it works sometimes doesn't. Same problem with HTTPS also.
I have some application running over there but when i try to access it thru browser sometimes it works but most of the time doesn't. When I restart the instances from azure portal, its works after
that(not always but most of the time).
Now I am confused what is going on there. I am creating cloud service and virtual machines using java sdk and setting input endpoints also. After creation of all instances i restart every instance programmatically .
I am not sure whether restart is required or not. It must be something to do with input endpoints only but not able to get the right thing i guess. When i do the same thing thru azure portal(creation of cloud service with virtual machines and setting up input
end points) everything works fine but not achieving the result when implementing it by java sdk API. Please help me.

HI Nithin,
Thanks for your reply. I am setting the endpoints after creating my instances using update call. Here's the code snippet.
AzureService aServ = new AzureService(session);
if(aServ.checkNameAvailability(clusterName)) {
aServ.createHostedService(clusterName, "dbX cluster");
// Creating head instance
aServ.createHead(clusterName, imgName, headType, userName, pswd);
// Setting end points for head node
String name = "ssh";
int port = 22;
aServ.updateVMInputEndpoint(clusterName, "Head", name, port);
// Restarting head instance
aServ.restartVM(clusterName, "Head");
String roleName = "Node";
String tmpRoleName = "";
for(int i=0; i<noi; i++) {
port = 43210+(i+1);
tmpRoleName = roleName + i;
// Creating node instance
aServ.createVM(clusterName, tmpRoleName, imgName, nodeType, userName, pswd);
// Setting end points for node instance
aServ.updateVMInputEndpoint(clusterName, tmpRoleName, name, port);
// Restarting node instance
aServ.restartVM(clusterName, tmpRoleName);
// Method to update the input endpoint details
public void updateVMInputEndpoint(String clusterName, String vmName, String name, int port)
throws Exception {
VirtualMachineGetResponse resp = computeManagementClient.getVirtualMachinesOperations().
get(clusterName, clusterName, vmName);
VirtualMachineUpdateParameters updateParameters = new VirtualMachineUpdateParameters();
//get the configuration list
ArrayList<ConfigurationSet> configlist = resp.getConfigurationSets();
//get inputendpoint list and update it
ArrayList<InputEndpoint> endpointlist = configlist.get(0).getInputEndpoints();
InputEndpoint inputEndpoint = new InputEndpoint();
inputEndpoint.setEnableDirectServerReturn(false);
inputEndpoint.setPort(port);
inputEndpoint.setLocalPort(port);
inputEndpoint.setName(name);
inputEndpoint.setProtocol(InputEndpointTransportProtocol.TCP);
endpointlist.add(inputEndpoint);
// Open port for https on head node
if(vmName.equals("Head")) {
inputEndpoint = new InputEndpoint();
inputEndpoint.setEnableDirectServerReturn(false);
inputEndpoint.setPort(2400);
inputEndpoint.setLocalPort(2400);
inputEndpoint.setName("https");
inputEndpoint.setProtocol(InputEndpointTransportProtocol.TCP);
endpointlist.add(inputEndpoint);
updateParameters.setConfigurationSets(configlist);
//required for update
OSVirtualHardDisk osVirtualHardDisk = resp.getOSVirtualHardDisk();
updateParameters.setOSVirtualHardDisk(osVirtualHardDisk);
updateParameters.setRoleName(resp.getRoleName());
OperationResponse updtResp = computeManagementClient.getVirtualMachinesOperations().update(clusterName, clusterName, resp.getRoleName(), updateParameters);
And every time i am creating a new cloud service along with head and node instances. Region is "South Central US".
I am setting ProvisionGuestAgent field to true at instance creation time. Thank you.

Complete code to send an attachment with a text message using java mailapi

Similar Messages

Maybe you are looking for