Completed shopping carts again reapearing in the sourcing cockpit

Hi,
We are facing a problem for the sopurcing cockpit. There are some shopping carts which are created from the catalogs and after approval purchase orders are getting created without any problems.
Next day these shopping carts are coming into the sourcing cockpit. This is happeneing only for a perticular company code whose corresponding backend R/3 resides on a differetent box.
My question is if the report BBP_GET_STATUS_2 is run and during that time if the backend R/3 is not available what will be the result. Can this cause the shopping carts to reappear into the sourcing cockpit.
We are on SRM 5.
Thanks and Regards
Manoj Upadhyay

Hi,
maybe the two notes
SRM: 1134786       
Backend: 1123548
help. They include most of the relevant notes with corrections for BBP_GET_STATUS_2.
Best regards,
Georg

Similar Messages

  • SOURCE_REL_IND : shopping cart not appearing in the sourcing cockpit

    Gurus,
    Few of the shopping carts after deleting the follow-on PO doesn't appear back in the sourcing cockpit. Furthermore, I found the SOURCE_REL_IND set to blank in table BBP_PDIGP.
    Since this is happening at random, not sure if I can forcefully push the cart into the sourcing cockpit using any FM.
    Thank you.
    PS  : I tried FM : BBP_PDIGP_DB_DIRECT_UPDATE, but the next run of BBP_GET_STATUS_2 is revoking it back to space.

    Hello Ricardo
    SUB:- CLASSIC SOURCING ...
    assume that my buyer is incharge of the sc
    1.requestor creates a sc and buyer also create a PO from the cockpit.
    2. later business decides some thing  wrong so buyer deletes the same PO
    3. after status job the same sc why comes to cockpit. the same buyer should look each time the follow on docuemnts created or not?
    4. what is the SAP stratergy here deleted PO taking to cockpit again
    5. understand many customer has different taste.
    6. if i were buyer which i really deleted the same PO , i dont want to see the the same sc again into cockpit.
    sap has any flexible options ?
    7. any customers reported to sap this is a problem or incidence.
    i do have some incidents in sdn , 2 of them dont like this functionality
    BBP_GET_STATUS _2 - Deleted PO's
    deleted po not taken to the cockpit.
    what is the sap sourcing stratergy describes this scenario ?
    br
    muthu

  • Should the vendor in the Shopping Cart be updated from the Sourcing Cockpit

    Hi All,
    hopefully an easy question for someone to answer.
    When a vendor is assigned in the Sourcing Cockpit and the Purchase Order is created should the vendor be updated in the linked shopping cart?
    Cheers
    Chris

    Hi Chris,
    All questions are welcome irrespective of the criticality so you are free to ask anything related to SRM.
    The vendor will not get updated in the shopping cart if you assign a vendor at the time of sourcing while creating a P.O. The same can be checked out by selecting the Source of supply / service agents link in the check status for a particular shopping cart.
    The source of supply field will only be populated when you assign the vendor at the shopping cart level and not during the P.O creation.
    Hope this will make you clear.
    Rgds,
    Teja

  • The Shopping cart not appearing in the sourcing cockpit of the buyer

    Hi
    We are using Extended Classic Scenario. The SC was created in SRM and then after approval was send to a central buyer for sourcing. The central buyer redistributes the same to the respective Buyer based on the purchasing group. However the SC doesnt appear in the sourcing cockpit of the actual buyer and when I see the details of the SC item in BBP_PD, I see that the Sourcing Relevant Indicator is marked 'Y' which means Sourcing is already completed. But nowhere a supplier has been added to the SC by anyone and it also doesnt reflect in the BBP_PD.
    Any idea how and why the indicator has the status 'Y' and how can I make the SC appear in the sourcing cockpit of the buyer.

    Hi Manoj,
    If the SC is directly converted into a P.O (either ordered / held status) please check the Sourcing settings in SPRO.
    SPRO > IMG > SRM > SRM Server > Sourcing > Define sourcing for product categories
    Check whether sourcing always carried out was maintained for the required product category. The P.O will get directly created in case the setting is " Sourcing never carried out".
    Please check this and let me know if this is the case.
    Rgds,
    Teja

  • Shopping cart not getting released from sourcing cockpit

    Hi,
      Am trying to release a shopping cart  from sourcing, but it's not getting released. Mentioned below are the methods I've tried and area'a which I verified for possible error. The major challenge is it's not throwing any error message. Your inputs & guidance are really helpful & appreciated.
    - Moved the SC to workarea in sourcing cockpit and tried creating PO - Failed w/o any error.
    - Verified in backend BBP_PD - No error message
    - verified in rz20 - No error message.
    - Attributes used in SC - Verfied all the major values such as Vendor, account assignment, basic data etc - No issues.
    - Tried creating PO creation in backend w/o posting it - able to create PO with same data.
    Thanks & Regards
    Aswini

    Hi
    Check it up any errors in the web application  monitor. you must get some error message..
    update us what was the error message. did you assign the vendor before you create a vendor in the sourcing cockpit?
    are sc again goes back to worklist?
    regards
    Muthu

  • Shopping cart not appearing in users sourcing cockpit for completion

    Hi
    A user cannot see his shopping carts in his sourcing cockpit  in his worklist. He finds them with the find tab but he cannot mark them as complete. The completion check box column is not there. However another colleague can find these shooping carts and the completiong column is there. Why this occur?
    Does it have anything to do with where the user is placed in the org. struture? Please advise.
    Kind regards

    Hi,
    seems that the requirement is assigned to a different Pgroup. Therefore one user does see it, and the other one not. When you adjust the assignment in the Org Model, the user will see the requirement.
    Check the responsibility and assignment of your Pgroups.
    Cheers,
    Claudia

  • Shopping cart item not appearing in sourcing cockpit

    Hi,
    I have an issue which is related to sourcing activity.
    I ordered a shopping cart and the status is approved the product category is set to sourcing always carried out after ordering when I check the status of the line item it is showing that the line item is in purchaser work list,but when I login as a purchaser I am not able to see the cart in sourcing cockpit.
    I have maintained strategic and operational purchaser roles for that user and product responsibility for that pruchasing group even then line item is not appearing in sourcing cockpit can any one among you throw some light on this.
    regards,
    IGA

    hi,
    Usually when I browse sourcing area the last work item should be my shopping cart line item.
    But I am not able to find the line item in sourcing area,I searched in all possible ways,do you think I missed some sort of settings regarding this.
    regards,
    IGA.

  • SC not  in the sourcing cockpit after the follow-on document is deleted

    HI,
        In  sourcing cockpit ,  I created a contract by SC , but  I  deleted the contract , the SC didn't appear in sourcing cockpit.  the SOURCE_REL_IND  still is 'Y',    I have no way to create new contract by the SC .
       I don't know if it is the standard functionatity,  It seem to be not reasonable.
      Please tell me the solution  that SC can be back to sourcing cockpit  automatiocally.
      even if I  carry out the BBP_GET_STATUS_2.  it  still don't  work.
       Thanks a lot.
      Jesse

    Hi
    the rule is below
    sc created 2 qty  -- PO created 2 qty -PO deleted - now order quantity and PO quantity difference is there so now SC comes to cockpit and this shopping cart item  needs to sourced and PO needs be created.
    i did not test below scenario.
    SC CREATED - contract or Bid invitation  created and now Contract / bid invitation deleted and now you are expecting this sc item comes to cockpit.
    Note 1068497 - BBPSC04: Incorrect status for items completed in sourcing
    Symptom
    You create a shopping cart which is sent to sourcing cockpit. You create a follow-on document. For eg: Bid invitation. You delete the same and complete the item in sourcing. The status of the item in check status is shown as 'Approved' instead of 'Cannot be ordered'.
    As per the above note sap rule, even though Bid Invitation deleted and reference shopping cart must venture to cockpit to create another follow on document.in your case SOURCE_REL_IND = Y instead of X. What is the item status of  sc after contract / po deleted?

  • Shopping cart history not showing the latest stauts

    Hello Experts,
    We are using SRM 4.0 classic scenario and the user has tried the following sequence
    1) Shopping cart created with auto approval
    2) System created a PR in R3 system. Shopping cart history is showing Follow on document created.
    3) PR line item deleted in R3 system. Shopping cart history is showing follow on document deleted.
    4) PR line item Deletion indicator removed and subsequent PO created based on the PR. Shopping cart history still showing the follow on document Deleted. and the PO details are not showing in the Shopping cart history,
    Please help how to resolve the issue,
    Thanks & Regards,
    Madhan.

    4) PR line item Deletion indicator removed and subsequent PO created based on the PR. Shopping cart history still showing the follow on document Deleted. and the PO details are not showing in the Shopping cart history,
    Is it new PO created w.r.t that PR ? or old PO only?
    since you removed deletion flag. again new sc must have created in srm side by transfer job . check it up.
    Any these twos available in BBP_DOCUMENT_TAB table.
    BR
    Muthu

  • How to see "completed" shopping carts in Shopping Cart POWL?

    Hi,
    We are running SRM 7.0 SP 6 in Extended classic scenario. (And for some prod. cat. we run classic scenario)
    Our issue is that we would like to have th possibility to display shopping carts, that has been completed (GR is made on the PO).
    These are not visible in the Shopping Cart POWL from Standart SAP, how I make the completed SC visible in this POWL?
    /Brian

    Hi Brian,
    I think the qucik criteria  miantenance section does not have the  criteria field "including completed shopping cart". Atleast it was not there in suppor pack 5.0 , could be a bug with SAP.
    Alternative is to  go to advance search and from there  for SC you will have the criteria including completed SC option check that and you will get.
    You can create your own Query from  the  template for SC and that have the option including completed shopping cart.
    Cheers
    Iftekhar Alam

  • Including Completed Shopping carts option?

    Hello all,
    I have one query , my system details SRM 7.0 SP6 , scenario: ECS
    In the Shopping cart POWL what is purpose of the option "Including Completed Shopping cart".
    In the Extended Classic Scenario when will the shopping cart come under "completed" status ,means what follow on document to be created to accomplish completed status.
    Regards
    Madhan

    Hello Madhan,
    To correct what wrote Saj, SC has status "Completed" when all its items were fully confirmed or if you deleted SC.
    Regards.
    Laurent.

  • Completed shopping carts displayed in POWL as a Open cart

    Hi SAP Experts,
    Whenever create a confirmation of full quantity or value without last delivery indicator in SRM then this shopping cart still displayed in POWL as a open cart tab.
    Also we remove the include completed Shopping carts from the POWL query but still it is displayed in open carts.
    Please let me know how to remove this completed shopping cart from my POWL (Open cart Tab).
    Please let me know any standard setting or development for the same.
    Regards,
    Abhijit

    Hello,
    I have recreated this in my system, but I got a different result.
    I created a confirmation for full quantiy (without last delivery flag) and shopping cart is no longer displayed in POWL. It will be displayed only if I flag the "including completed shopping cart".
    At shopping cart item level, indicator FINAL_INV is updated with an "X".
    Check if this indicator has been updated in your cart.
    Run CLEAN_REQREQ_UP and see if something changed.
    Regards,
    Ricardo

  • Shopping cart not emitted to the right manager cause change unit

    Hi guys,
    We did a shopping cart , unfortunately the manager assigned is not the good one , the status is 'Awaiting approval' ,the requester is not linked to  the same unit of  the manager's one.
    We would like to redirect his shopping cart  towards the good manager linked at least to a different unit.
    The requester has changed unit.
    Is it possible for a given manager not related directly to the requester to redirect the shopping cart  he is not the recipient to another manager in his own workplace.
    Thank you in advance for your answer.
                       Best regards Mahmoud

    Hi Mahmoud,
    If you are using a BAdI - BBP_WFL_APPROV_BADI then incase if your workflow doesn't find any approver, you can append APPROVAL_ADMINISTRATORS table.
    In this way, you are direct your SC to administator's approval.
    Your code will like this -
    <i><b>IF approval_table[] IS INITIAL.
    if no approver found because send sc to default administrator
    ls_approver-approval_index = actual_approval_index.
              ls_approver-approval_agent = 'USMAHMOUD'.
              ls_approver-name = 'Mahmoud Mahmoudi'.
              APPEND ls_approver TO approval_administrators.
            ENDIF.
    ENDIF.</b></i>
    Please reward few points, if you find this useful.
    Regards.
    Pras

  • Backend PO not getting created inspite of Complete shopping cart

    Dear All,
    We are having Classic Scenario with SRM 5.0 in integration with ECC 6.0 with support pack SAPKIBKT09.
    After Shopping cart creation with all details (fixed vendor, material, price etc) still backend system doesn't create PO. It always creates PR. Wht settings are missing plz suggest.....
    I understand that I have maintained under "Define objects in Backend system" as Purchase order if item data complete otherwise PR. Product categories has been transfered from backend.Document type has been created as ECPO in backend for PR and PO both.
    Kindly suggest any solution or pointers....
    Thanks
    Regards
    Dinesh Singh

    have you specified the backend po no range under
    SRM IMG ->Supplier Relationship Management->SRM Server->Cross-Application Basic Settings->Number Ranges->SRM Server Number Ranges->Define Number Ranges per Backend System for Follow-on Documents
    no range of POs (preferably as PO)
    this interval should be defined in above step
    Define Number Ranges for Shopping Carts and Follow-on Documents
    this no range should match to the external no range in ECC under
    IMG->Materials Management->Purchasing->Purchase Order->Define Document Types-> the desired PO doc type in ECC
    Aslo for attribute BSA yr ECC PO doc type should be available.
    If you are using ECC contract as a SOS for SC item
    For that coontract type in ECC the PR type should be liked in contract doc type config.
    Also check the logic in BADI BBP_CREATE_BE_PO_NEW
    BR
    Dinesh

  • Shopping cart : how to determine the timeout

    Hello guys,
    Where can I know (and modify) the Shopping cart Timeout?
    Thanks for your input,
    Regards,
    Thomas

    Hi Masa,
    Thanks for your answer.
    The point you're talking about is my issue. What does  determine the Shopping Cart timeout?
    Is it the Session Timeout? Or is there also a special value for the shopping cart.

Maybe you are looking for