Shopping cart not getting released from sourcing cockpit

Hi,
Am trying to release a shopping cart from sourcing, but it's not getting released. Mentioned below are the methods I've tried and area'a which I verified for possible error. The major challenge is it's not throwing any error message. Your inputs & guidance are really helpful & appreciated.
- Moved the SC to workarea in sourcing cockpit and tried creating PO - Failed w/o any error.
- Verified in backend BBP_PD - No error message
- verified in rz20 - No error message.
- Attributes used in SC - Verfied all the major values such as Vendor, account assignment, basic data etc - No issues.
- Tried creating PO creation in backend w/o posting it - able to create PO with same data.
Thanks & Regards
Aswini

Hi
Check it up any errors in the web application monitor. you must get some error message..
update us what was the error message. did you assign the vendor before you create a vendor in the sourcing cockpit?
are sc again goes back to worklist?
regards
Muthu

Similar Messages

Shopping cart not getting released after SSR-SPS upgrade

Hi all,
We are facing an issue wherein the shopping cart doesnt get released at the final step. All the approvals are taking place correctly.
when i test in the BOR BUS2121/SetReleased method , i am getting an error 'Buffer table not up to date'. Messaeg number BBP_WFL/052.
I searched the forums with the above error and it meantioned to check the user parameters like printer etc. The user parameters are all correct and all the carts are getting errored out.
Has anyone else faced this issue? are there any notes that we can implement to correct this issue?
Thanks,
Soumya

Hi,
In our case the problem was solved by executing the manual steps in note1233774 - Custom fields are not transfered to the historical version.
The three missing entries in table BBPD_COMP_FIELDS were causing the SC, POs and Contracts to fail in our SRM 5.5 system. It seems that when we upgraded the system, SAP/SRM didn't provide the required table entries to support the changed code.
Jerry

SOURCE_REL_IND : shopping cart not appearing in the sourcing cockpit

Gurus,
Few of the shopping carts after deleting the follow-on PO doesn't appear back in the sourcing cockpit. Furthermore, I found the SOURCE_REL_IND set to blank in table BBP_PDIGP.
Since this is happening at random, not sure if I can forcefully push the cart into the sourcing cockpit using any FM.
Thank you.
PS : I tried FM : BBP_PDIGP_DB_DIRECT_UPDATE, but the next run of BBP_GET_STATUS_2 is revoking it back to space.

Hello Ricardo
SUB:- CLASSIC SOURCING ...
assume that my buyer is incharge of the sc
1.requestor creates a sc and buyer also create a PO from the cockpit.
2. later business decides some thing wrong so buyer deletes the same PO
3. after status job the same sc why comes to cockpit. the same buyer should look each time the follow on docuemnts created or not?
4. what is the SAP stratergy here deleted PO taking to cockpit again
5. understand many customer has different taste.
6. if i were buyer which i really deleted the same PO , i dont want to see the the same sc again into cockpit.
sap has any flexible options ?
7. any customers reported to sap this is a problem or incidence.
i do have some incidents in sdn , 2 of them dont like this functionality
BBP_GET_STATUS _2 - Deleted PO's
deleted po not taken to the cockpit.
what is the sap sourcing stratergy describes this scenario ?
br
muthu

Shopping cart not appearing in users sourcing cockpit for completion

Hi
A user cannot see his shopping carts in his sourcing cockpit in his worklist. He finds them with the find tab but he cannot mark them as complete. The completion check box column is not there. However another colleague can find these shooping carts and the completiong column is there. Why this occur?
Does it have anything to do with where the user is placed in the org. struture? Please advise.
Kind regards

Hi,
seems that the requirement is assigned to a different Pgroup. Therefore one user does see it, and the other one not. When you adjust the assignment in the Org Model, the user will see the requirement.
Check the responsibility and assignment of your Pgroups.
Cheers,
Claudia

The Shopping cart not appearing in the sourcing cockpit of the buyer

Hi
We are using Extended Classic Scenario. The SC was created in SRM and then after approval was send to a central buyer for sourcing. The central buyer redistributes the same to the respective Buyer based on the purchasing group. However the SC doesnt appear in the sourcing cockpit of the actual buyer and when I see the details of the SC item in BBP_PD, I see that the Sourcing Relevant Indicator is marked 'Y' which means Sourcing is already completed. But nowhere a supplier has been added to the SC by anyone and it also doesnt reflect in the BBP_PD.
Any idea how and why the indicator has the status 'Y' and how can I make the SC appear in the sourcing cockpit of the buyer.

Hi Manoj,
If the SC is directly converted into a P.O (either ordered / held status) please check the Sourcing settings in SPRO.
SPRO > IMG > SRM > SRM Server > Sourcing > Define sourcing for product categories
Check whether sourcing always carried out was maintained for the required product category. The P.O will get directly created in case the setting is " Sourcing never carried out".
Please check this and let me know if this is the case.
Rgds,
Teja

Completed shopping carts again reapearing in the sourcing cockpit

Hi,
We are facing a problem for the sopurcing cockpit. There are some shopping carts which are created from the catalogs and after approval purchase orders are getting created without any problems.
Next day these shopping carts are coming into the sourcing cockpit. This is happeneing only for a perticular company code whose corresponding backend R/3 resides on a differetent box.
My question is if the report BBP_GET_STATUS_2 is run and during that time if the backend R/3 is not available what will be the result. Can this cause the shopping carts to reappear into the sourcing cockpit.
We are on SRM 5.
Thanks and Regards
Manoj Upadhyay

Hi,
maybe the two notes
SRM: 1134786
Backend: 1123548
help. They include most of the relevant notes with corrections for BBP_GET_STATUS_2.
Best regards,
Georg

PO is not getting released from SRM

Dear Experts,
I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
(SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
Kindly let me know is there any t-code for enable communication between SRM and SUS?
I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type but
PurchaseOrderRequest_Out for PO transfer is not getting triggered in sxmb_moni in SRM.
Thanks in advance.
Regards,
Pawan Keshwani

Hi,
Thanks for your reply.
I have configured Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani

Custom fields from Shopping cart not getting transferred

We have added a few custom fields in both Shopping cart and PO screens.
Somehow when a cart is getting converted to a PO, the values maintained in the shopping cart are not flowing in to the PO.
Please advice as to what needs to be done to take care of this issue.
Thanks.
Anuradha SenGupta.

Hello Anuradha,
Please go thru the link .
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27?QuickLink=index&overridelayout=true
Also in your badi BBP_CREATE_BE_PO_NEW, try to implement the code in the similar way which I did for creating PR in Backend.
DATA : ls_req_item TYPE bapi_te_requisition_item.
LOOP AT is_sc_document-item INTO wa_sc_item.
    wa_extension-structure        = 'BAPI_TE_REQUISITION_ITEM'.
    ls_req_item-preq_item         = wa_sc_item-number_int.
    ls_req_item-z_req_type_db     = wa_sc_item-z_req_type_db.
    wa_extension-valuepart1       = ls_req_item.
    APPEND wa_extension TO cs_rq_document-it_extensionin.
    CLEAR wa_extension.
    ls_req_item-preq_item         = wa_sc_item-number_int.
    ls_req_item-z_asset_sub_cat   = wa_sc_item-z_asset_sub_cat.
    wa_extension-valuepart1       = ls_req_item.
    wa_extension-valuepart2       = ls_req_item.
    APPEND wa_extension TO cs_rq_document-it_extensionin.
    CLEAR wa_extension.
ENDLOOP.
Hope this will help you.

Internal note \ Vendor text in shopping cart not getting correctly saved.

Hi SRM folks,
We are at SRM 4.0 with extended classic.
We are facing issue with shopping cart ( BBPSC01 ) for vendor text \ internal note in " Documents and Attachments Tab" in item detail screen as below :
Suppose we enter below three lines in internal note \ Vendor text as:
XXX
AAA
CCC
They will appear as below :
XXX
AAA
AAA
CCC
CCC
Line items are getting duplicated. Please let me know how this can be resolved or if any SAP note available ?
Moderator message - Please do not offer points or rewards
Thanks in Advance,
Sachin
Edited by: Rob Burbank on Jul 30, 2010 9:39 AM

Here is solution :
kindly apply the following notes:
1253076 No Vendor Text Exists Incorrectly Displayed
1289174 Vendor text/Internal Note is not deleted
1313904 Extra Line Breaks are added in Approval Notes
After this please republish all of the Templates with the Report
w3_publish_services.
Afterwards the Template Cache has to be invalidated with the
transaction sitspmon -> Tab "Template and Mime Cache" -> Button
"Systemwide".
If you use Proxy Server, you have to empty the cache there as well.
Furthermore the Temporary Internet Data of the Browse has to be deleted.
Retest the scenario and see if the behavior still persists.
Those note solved the issue

Vendors not getting published from Sourcing 7.0 to ECC

Dear Experts,
In our SAP Sourcing System version 7.0 we are not being able to publish suppliers from Souring to ECC but opposite is working fine i.e Vendors are coming from ECC to sourcing perfectly fine.
When ever we are creating a supplier in Sourcing and trying to publish it to ECC the status always remains as "Create Supplier : Waiting For Response" . Even iDocs are not getting created and also in PI we are not getting any data in the inbound area.
Any help will be appreciated.
Regards,
Rakesh Daiya

Hi Rakesh
Please check if the Interface and communication channel have been configured properly from PI side -
Communication Component (Sender): SAP Sourcing system
Interface : MI_OB_Supplier
Namespace : http://sap.com/xi/Esourcing/SRMJS/OP
Communication Channel : CT_Generic_Receiving_IDOC_Channel_For_ERP_Inbound_IDOC
Thanks
Sudipta

Some SC Items not getting transferred to sourcing cockpit

Hi,
Even after the SC is complete, approved and the "sourcing is always carried out" setting is maintained in the config, still some requirements are not transferred to sourcing cockpit.
The sourcing relevant indicator in BBP_PDIGP table is set to blank.
In table CRM_JEST the SC status is approved but the item status is not changing to "Item in transfer process- inactive".
We are now forced to run FM BBP_REQREQ_TRANSFER manually for those SC's to push them to the sourcing worklist of the buyers.
Can someone please say why?
regards,

Hi,
Find Your SC in transaction BBP_PD and check 'organizations' fields (table BBP_PDORG).
There should be list of purchasers. Logon to any purchaser listed in BBP_PD and look at Sourcing.
If You don't find your SC, check following in SPRO:
- SRM Imp. Guide -> Supplier Relat. Managm. -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category
- SRM Imp. Guide -> Supplier Relat. Managm. -> SRM Server -> Cross-Application Basic Settings -> Define Objects in Backend System (purch. req...)
SRM Imp. Guide -> Supplier Relat. Managm. -> SRM Server -> Sourcing -> Define interactive Sourcing for Product Categories
Regards,
Marcin Gajewski

Shopping Cart not appearing in Sourcing Cockpit

Supplier Relationship Management -> SRM Server -> Sourcing -> Define Sourcing for Product Categories
In this config. we have maintained Sourcing as 3. sourcing carried out for items without Assd. source of supply also we tried with 2. Sourcing always carried out.
Yet the shopping cart does not appear in the sourcing cockpit .. a PR is created automatically and SOURCE_REL_IND is set to blank.
Is there any other config. that we are missing for cart to appear in sourcing cockpit.

Hi Saurav,
I had a similar problem and solved in the following way.
Please check the settings maintained in
Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders)
- Remove the entries from this table.
- Recreate the entries from F4 Search Help only and do not type.
- Do not maintain wild Cards in two columns ( Purchasing Group or Material Group) At least one entry should exists.
- Test it again with creating new SC.
RBEI SRM/Ram

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

Shopping cart (not a u201Climitu201D) can not be found in Sourcing Area!!

Issue:
Shopping cart (not a u201Climitu201D) can not be found in Sourcing Area to create a new PO, if the associated PO has been deleted directly at Header level.
But, shopping carts (not a u201Climitu201D) can be found in Sourcing Area to create a new PO, if the associated Pos have been deleted at Line Item level first and Header level next.
Hence, POs can not be deleted at Header Level directly, but only at line item level first and header level next.

Hello Uma,
If PO is deleted at header level then SC can be found in sourcing cockpit only if for a SC
1. SOURCE_REL_IND = X in table BBP_PDIGP and
2. Quantity should not be completely consumed by the PO in table BBP_PDIGP.
Check these 2 parameters for your SC in BBP_PD.
When we delete PO at header level SC quantity is consumed by the PO and thats the reason it will not appear in sourcing cockpit.
You can also go through the logic in report CLEAN_REQREQ_UP, you will find these details. This report decides whether SC should appear in Sourcing cockpit.
Thanks,
Shital Nimje
Edited by: Shital Nimje on Sep 22, 2009 4:10 PM

Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

Shopping cart not getting released from sourcing cockpit

Similar Messages

Maybe you are looking for