Completely Unable to Connect to Internet using 3g!!

I love this phone. It's great. But I'm getting pretty miffed that when my 3g is turned on, I CANNOT connect to the internet. I live in 75248, in the middle of North Dallas where I know they have good 3g coverage. I can't connect to Safari, Weather, Stocks or ANYTHING using 3g. Is anyone else having this problem?
It makes me mad that I'm paying $30 a month for a service that is basically garbage at this point in time. It's a great phone, wi-fi surfer, app machine, but it ***** at 3g.

This might be a dumb question, but do I need to turn on Data Roaming to be able to use 3g data? Will I be able to access the internet through 3g if Data Roaming is off?

Similar Messages

Unable to connect to internet using time capsule

Over the last couple of days I have run into a peculiar problem. I am able to connect to the internet when I connect the ethernet cable directly to my computer. Now when I use time capsule to connect wirelessly, the connection either does not get established or if it gets established fails after a few mins and I am unable to browse the internet. I have noticed this problem especially after Mac OSX 10.6.3 update. I did not have this issue earlier. I am not sure if this is the root cause but would surely like some help.

This behavior may indicate that you are picking up wireless interference from cordless phones, another wireless network, security system or other electrical device. It's hard to pinpoint the exact cause.
Suggest that you start by downloading iStumbler and using the application to display your signal strength and noise on your network. What values do you see for each of these?
Also look at any other networks to see if they might be using the same channel or an adjacent channel as your wireless network. If so, change the channel on your wireless network so that it is as far away as possible from other networks.
If you have cordless phones, turn them all off for at least an hour when you can to see if your network performance improves.
Interference robustness often does more harm than good. Try turning it off. However, if you find that your network performs better with it on, that is an almost sure sign that wireless interference is occurring on your network.
You won't be able to do anything about cordless phones at your neighbors (my neighbor...across the street...can knock me off my wireless network if he is in his front yard with his phone and it rings). Users far underestimate the effect that cordless phones have on their wireless networks.
Post back with your findings when you have tried a few things.

Unable to connect to Internet using C2-03 as a mod...

Hi
I have a Nokia C2-03 phone. I have two Sims sim1 is Airtel and Sim2 is Tata docomo. I am using tata docomo for internet browing. its working fine when browing from the handset but when i connect it to my desktop which has windows xp 64 bit os i get the error Packet Data connection unavailable. i have received the settings from the service provider saved them and restarted the mobile but the issue persists.
Any help in resolving this problem will be hugely appreciated.
Thanks & Regards
Flaviazzu

Hi Flaviazzu,
Thank you for your post and welcome to the forums!
Since you can use the packet data on your phone but not on your computer may mean that your operator does not allow you to use your data access via tethering. We would recommend that you review the terms and conditions of your service and see if it mentions anything about tethering. If tethering is allowed in your contract, please follow the instructions below to set up your internet connection.
To create an internet connection for the first time, do the following:
You can find the latest available Nokia Suite from your local support site
In the Nokia Suite Home view, click Tools -> Options -> Connect to Internet
Depending on the device model you are using, the internet connection is created as follows:
The connection is created automatically or you need to select the operator to be used when creating an internet connection. From the list that shows the operators in your country, select your home operator (in other words the operator to whose network you have subscribed to). Then click OK.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Unable to connect to Internet using dial-up. Mess...

Discovered the problem when trying to use my work laptop to connect remotely to the work network using the Internet.
Later tried using the home computer and to connect to the Internet using our ISP and got the message "No dial tone. Check the modem is plugged into the phone line"
Have checked that the modem lead is plugged in correctly. Have unplugged and re-plugged in. Also have tried using different modem leads from phone socket to computers. This does not solve the problem.
Therefore tried different computers, modem lines and different ways of connecting to the Internet therefore do not believe problem is caused by out equipment or Internet settings.
Have no telephone extension socket.
Have another phone line coming in to the house but this is not used/is not active.
BT 1571 is not set up on our phone line.
BT have done a normal line check and found no fault. with the phone line. Indeed the phone works fine for voice communications.
Have looked at line socket and tried test socket - again telephone works but dial-up doesn't.
In the past have had problems where the dial-up connection kept dropping.

If the 'phone line works, but you're getting a "no dialing tone" message trying to connect with a modem, then it must be either your equipment or the way it's set up.
Can you hear a dialling tonw when the modem goes "off hook" ? If you can, try setting the modem to blind dial - ie go ahead and dial, regardless of whether or not it thinks it's getting a dialling tone. I can't be more specific than that - it's years since I messed around with AT commands, although I've probably go an old manual or two hiding somewhere.
If there really is no dialling tone, as far as the modem is concerned, I'd suspect the lead. Some modems use non-standard terminations - although the connectors fit, the wires need to be terminated on non-standard pins at the modem end.

Unable to connect to internet using wifi and lan cable after updating to windows 10

HI Team,   After updating to windows 10. I'm unable to find wifi and lan connectivity in settings->internet . I m trying all stuff to resolve the problem, But i'm unable to to do it . Please help me with this. I cannot attach screen shots over here if possible i could send screen shots if any of the e-mails id's available

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand that you are having an issue with your Wi-Fi on your HP Envy M6-1125dx.  I did some research and found a great document for your called HP PCs - Troubleshooting Wireless Network and Internet (Windows 8). This document will help you troubleshoot the Wi-Fi issue.  Have you received any error messages? If you are receiving any of these errors:Internet Explorer cannot display the Web page.Work Offline: No connection to the Internet is currently available.Not connected: You are currently not connected to any networks.Here is another document called HP PCs - Resolving Broadband Internet connection problems (Windows 8).  Have you tried to Restore the BIOS? Have you uninstalled the driver in the Device Manager?If not, please do the following: 1. Uninstall the driver in Device Manager2. Restart the Notebook3. Reinstall the driver. You can use either the HP Driver's page for your specific Notebook, or you can use the HP Support Assistant.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. Have you tried to directly connect to the Modem/Router?  Please follow the troubleshooting steps and re-post with the results and information required from the questions above.  Thanks!

Unable to connect to internet using DHCP with WRT54G behind ISA 2004

Hello,
For starters, the Linksys WRT54G is located behind the ISA 2004 Sever firewall. The gateway for the LAN and internet segment is set at 192.168.1.1 and 192.168.2.1 for the WLAN segment on the ISA box. All the proper network rules and access rules have been created. If I set the adapter card on the lap top with a static IP, e.g. ip address as 192.168.2.3, subnet mask: 255.255.255.0 default gateway: 192.168.2.1 and primary DNS: 192.168.1.1 the lap top can connect to the internet through the WLAN segment. At this point the WRT54G is set for internet connection type as automatic configuration DHCP, local IP address as 192.168.2.2 subnet mask as 255.255.255.0 and DHCP server disabled
When using DHCP on the WRT54G by enabling it and setting the Starting IP address to 192.168.2.3, I cannot connect to the internet. When using the CMD prompt and doing a ipconfig /all this is the result
I get       DHCP enabled: yes
               Autoconfiguration Enabled: yes
             IP Address: 192.168.2.3
               Subnet Mask: 255.255.255.0
               Default Gateway: 192.168.2.2
               DHCP Server: 192.168.2.2
               DNS Server: 192.168.2.2
Is it possible to configure the WRT54G so that the default gateway can be set? Each time I change the Local IP address of the WRT54G e.g. 192.168.2.10, the default gateway gets the same IP address.
Any help would be much appreciated.
Thanks
Karl

In the 54g, setup an extra route to the other default gateway.
ie; route 192.168.2.2 mask 255.255.255.2 gate 192.168.2.1

Unable to connect to internet using Wireless WPA after installing XP SP3

Hi guys,
Just installled XP SP3 on my X40 and now I cannot connect to a WPA wireless network. I have updated the drivers etc but still no luck.
Has anyone else got this problem and been able to fix it.
I'm sure that if I uninstalled SP3 then it would work but I'd rather get a fix.
Message Edited by mundo on 08-13-2008 12:57 PM

I, too, am unable to get a good "connected" session with WPA.
I have tried Windows Wireless: stays in the mode: "Authenticating."
I have tried Intel Proset Wireless: stays in the mode: "Connecting."
I have tried Access Connections: stops after saying "Waiting for association."
These different programs allow me to set up WPA profiles, and they see wireless networks and can communicate with them.
I am on a Thinkpad T-42 (2373-Y3U). Intel adapter 2200bg. Windows XP Pro, SP3.
I have tried WEP, and it works fine. Other computers connect to (multiple, different) routers with WPA that I have tried, to no avail.
I loaded latest Intel driver (file name: 7vwc15ww.exe, dated July 29, 2008). But does not work...
I have tried going back to old drivers, but does not work. I have tried the steps: unload driver, load HotKey, Load PowerManagement, Load Access Connections, as described elsewhere, but does not work.
Why is this so hard. Should be a no - brainer, it seems to me. I've spent hours...
Thanks, Todd

I Unable to connect to internet using lan connection on airport -TC.

Just bought and installed a 2Tb Airport TC. Got the Wi-FI and all devices connected and working fine, the only problem is that when I
connect a pc to TC Lan port- i get no internet connection, when I connect a PC directly in ISP modem it works fiine, any ideas? thank you

As LaPastenague asked.....the TC should be in bridge mode...is it?
We did not get an answer from you on this.
The TC needs to be configured in Bridge Mode since you have another router "upstream" on the network.
Check to make sure that this is the case as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Network tab at the top of the window
Insure that Router Mode is set to Off (Bridge Mode)
Click Udate to save the settings
Allow the Time Capsule to restart, then power off both your modem/router and the Time Capsule. Wait a minute, start the modem/router first, and let it run a few minutes. Then, start the Time Capsule.

I am unable to connect to websites using Firefox. I can connect to websites with Internet Explorer. Please advsie.

I am unable to connect to websites using Firefox. I can connect to websites with Internet Explorer.
Please advise.
Thank you.

see http://kb.mozillazine.org/Firewalls

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

TouchSmart 600 unable to connect to Internet & email accounts. Error Code 0x80070057

TouchSmart 600 unable to connect to Internet & email accounts. Receive Windows Network Diagnostics error message "An unexpected error has occurred. The troubleshooting wizard can't continue" Error Code: 0x80070057. Using old laptop to send this message. Tried to restore back to a certain date but was only able to restore back to latest Windows download which did not correct my problem. Any help appreciated. Thanks.

I have the same problem connecting to the Internet that it is. It is more intermittent than permanent though. I have updated the driver from HP site, but no change. From the searches on the web problem seems more widespread though. HP do something! Please!

Problems connecting to Internet using Airport - can anyone help ?

I'm using a MacBook running OSX 10.4.11, trying to connect to internet using Airport. I connected OK first time, but after powering off the Mac, each time I now try to connect again, the Mac can't find the network. Network Diagnostics can't fix it either. I use a Linksys wireless router, connected to an ADSL modem. I use PPPoE. I live in Borneo, and the line connection is not great, occasionally the phone line drops out and then modem reconnects itself, I wonder whether this is causing some sort of problem with IP settings. The only way I can connect wirelessly is to start the Mac, reboot the modem, then the router, and plough through Network Diagnostics. A real pain. Help much appreciated.

I have a Linksys Wireless-G (model WRT54GS). This is working ok because I have two other wireless devices (internet radio and iPod touch) which connect fine. Firmware is up to date. I've done a bit more troubleshooting, and the the problem is connected with the phone line, which drops out all too regularly. Each time the phone line drops out, the Mac is unable to connect to the network wirelessly. After going through Network diagnostics, and rebooting the modem+router, it comes with a message saying "Network changes detected", and then I can reconnect OK. The funny thing is, the IPod touch can always reconnect no problem, even if the line has dropped out since the last login. Given that I've got a crappy phone line conection, is this normal or is there something wrong with my Mac settings ?

CS5.5 Subscription: Unable to connect to internet.

So, for two days, I've been unable to use either of the two Creative Suite 5.5 Master Collection licenses I'm currently subscribing to and paying a pretty penny for. Yesterday, Adobe customer support informed me that something must be "wrong with my machine", so, I dutifully did all of the testing, cleaning up, repairing and troubleshooting I could think of on that machine. CS5.5 Subscription on that one still doesn't work. Today, I attempted to use the other license I'm paying for on a different machine, with the exact same results.
When attempting to open any of the products, I get this message:
When I click Try Again, I get this one, which stays on this screen and never changes:
As you can imagine, I'm fairly certain I'm connected to the internet, since I'm typing this in the forum right now. I've attempted a wired connection, wireless connection and my MiFi connection, restarted, stood on one foot while patting my head, and attempted to bribe my software, with the same results each time.
Specs:
MacBook Pro 15" / Snow Leopard
Mac Mini / Lion
To reiterate, here are the steps I've attempted:
Repair permissions
Repair disk
Multiple restarts
Move from Wired to Wireless connection
Move from Wireless to MiFi connection
This isn't an issue with Lion, since it's occuring on both machines with different serial numbers. This is a problem with Adobe's subscription licensing server, or a problem with the way the software connects to it. Any assistance is appreciated, and the quicker I get it, the happier I'll be, since this has already caused me to fall behind on a deadline. At this point, I'm considering canceling the monthly subscription and reinstalling my version of CS4, which, while missing some of the features I upgraded to CS5.5 for, at least works.
Side note for Adobe personnel: It's not entirely clear in your FAQs for the subscription editions that you have to be connected to the internet every single time you open the software.

I'm getting that exact same message. Started today and it's driving me crazy. I can't find any information on error code 194:100. I talked to customer support through chat and they hadn't any clue as to what error 194:100 could be. They said it was technical and I should contact tecnical support. Why anyone would want to talk to a support agent that cannot fix problems and just generally tells you to call the real customer support, I have no idea.
This is the second time I've had problems with my software activation. It was slightly different but similar in several ways. I figured I'd metion some specifics to see if it matches more or less anyone else's problems.
Both times I've noticed I've had trouble with my adobe account id. Specifically I can log in just fine but I can't access the acount info section. I get a page not found error.
This time around I noticed many other weird things.
Adobe updater disappeared from my mac.
Encoder refused to encode certain premeire sequences.
Premiere froze on export of those same sequences.
And I first got the Unable to Connect to internet error this morning. Followed shortly The "Activation Failure error code #194:100" one. I've uninstalled and reinstalled several times and Premiere seems to run fine at least once. But if I try to open any other adobe application or if I load another project I get error 194:100.
The first time I had Activation Problems I ended up having to return the software, wait for the refund, delete my adobe id account, create a new one and buy it again with the new account.
I hope this is not a repeat of last time cause I'm seriously not rebuying defective software a third time.
I don't know if this helps but your problem seemed similar to mine.
15" Macbook pro 2.66 GHz Intel Core i7
NVidia GeForce GT 330M
OSX 10.6.8Snow Leopard
4GB DDR3 Ram

HT4623 iphone 5 unable to connect to internet

iphne 5 unable to connect to internet

I had the same issue and usually a reset of all the network settings on iphone did the trick.
this method did not work with my iphone 5 . i did something in router settings that seemed to change things a lot, for the better.
the wifi channel usually the routers use is channel 11, so i changed mine to channel 1. this solved my issues and the iphone connected just fine to the network, without restarting the iphone or resetting any settings or switching off and back on the wifi.
i am on 6.1.3 iOS

9300 Curve wifi problem - cannot connect to internet using only wifi once data turned off

I've got a 9300 Curve with a data plan from Rogers. I want to use my wifi in hotspots when I go overseas without using my data. I have no problems connecting to wifi networks. Once I turn off my data services, my connections to the wifi network show that the signal is still just as strong, but I can't use my browser, facebook, bbm, etc. - message is "unable to connect to internet" when I try and access my browser. This problem occurs whether I'm using a public hotspot or my home router. I used to be able to access wifi without using data from Rogers on my older Curve (can't remember the model), so I don't think it has anything to do with my plan.
Any suggestions/advice would be much appreciated!

Thanks for the reply!
Did you mean "leave data ON and turn off data roaming"? But that would just turn off my data while I'm roaming, and while I'm not roaming, it'll still access through data and not through wifi like I would prefer. That's what I understand, but pls correct me if I'm wrong! I guess I meant to also mention that whether I'm in my home zone or overseas, I still can't use my browser, bbm, etc through wifi only, with data turned off...it just says there's no connection to the server/internet, even though it shows that I'm connected to a wifi network.

Completely Unable to Connect to Internet using 3g!!

Similar Messages

Maybe you are looking for