Component access by user

Does anyone know how can I get user id's of anyone who access a component? And if possible the time when he/she view the component.

Hi,
first, welcome on SDN!
Seems that you are looking for something like the Activity Tracing, see http://help.sap.com/saphelp_nw04/helpdata/en/5a/84b83b3683094be10000000a11402f/frameset.htm and around.
Hope it helps
Detlev
PS: Please consider rewarding points if answers are helpful. Thanks in advance!

Similar Messages

I want to disable Internet access to user using GPO

I am using Win Server 2008 R2, I want to disable the users from accessing Internet which are in that OU. Can anyone tell me how is it possible ?

Hi,
Disabling Internet access using software on the client is inherently difficult. The client isn't aware of what is an internal resource (like an Intranet page for example) as opposed to an Internet resource. You can use GPOs to disable specific programs
(like browsers) or to change how traffic is routed by the client but in order to effectively control who can and can't access the Internet, your best bet is a perimeter device like a proxy or firewall that sits between your clients and the Internet and is
integrated with AD so it can manage access to the Internet based on users, groups, IP addresses, etc.
The closest you can come without a proxy is to configure a proxy server address for those users using the Internet Explorer Maintenance component (found under User Configuration\Windows Settings). This proxy can either be a non existent address or
if you want more control over the error messages users get, it can be an internal web server with a page that provide a custom message. The same configuration will allow you to list specific URLs that are exempt in case you have specific web sites, internal
or external that must be available.
Note that this option will apply to all browsing, internal and Internet based, but will only impact IE. Internet access using other browsers or other software will not be impacted unless that software leverages the IE proxy configuration (which many
applications do).
Hope this helps,
Guy

Remote Access VPN Users with CX Active Authentication.

I have ASA 5515 with CX for webfiltering , also have enabled remote access vpn . All my inside users are able to get active and passive authentication correctly . But for remote access VPN users , they are redirected to ASA external ip and CX authentication port 9000 but a blank page comes in and there is no prompt for authentication. I wasnt doing split tunneling , but now i have excluded ASA WAN ip from the tunnel and still have the same issue.
The CX version we have is 9.3.1.1

Have you excluded the VPN traffic from being NATed when traffic is going between clients?
Please post a full sanitised configuration of the router so we can check it for configuration issues.
Please remember to select a correct answer and rate helpful posts

I desperately need to access my User Library folder in Time Machine (Lion so = not visible).

Hi. I installed Lion a few months ago and got a new external drive to back up Time Machine.
Nobody told me the User Library would be made hidden in the new OS. I have been backing up regularly in the belief that all my work, settings and so on was safe.
Yesterday my iMac (27" 2.8 Ghz Core it with 4 gib memory) suddenly went mad. Message saying finder had quit whilst trying to restore windows. Desktop was flashing, no icons clickable, no external disks readable. Could access some progs and terminal, but nothing else. Could not get into the history folder to trash various plists and so on as the folder is hidden and the alt Go wouldn't work. The Finder just wouldn't do anything.
I have sorted it out BUT I have lost my address book entries, my browser booksmarks, my desktop shortcuts and my iCal entries. I need to access my User Library on my Time Machine. Is there a way?
I cannot believe I have been religiously backing up my stuff but Apple has made it so I can't access my backup of one of the most important folders on my Time Machine???
Is there anyway of getting into this from Terminal or something? I will never be able to get back all the bookmarks and stuff I've been researching for years. I have it backed up on two different hard drives, both of which have 'invisible' library folders. I have make the folder visible now, for future backups, but it's after the horse has bolted. I am furious, and just feel like bursting into tears because of all the time it's going to take me to get all my work back. I can't tell you how stupid this was, Apple.
If someone could help I'd be really grateful. I've got older backups but they are so old they won't get back my recent stuff.
Thanks.

select Finder
hole option key and select Go in the menu
Select Library
Enter Time Machine
You should be seeing all the versions of you Library folder.

Ssrs security access for users on a different domain

Hi
We are using ssrs 2008 r2 and have added a new domain to our network as we are working with another company.
Our original domain was say "DomainA" which can access all our reports, how do we give access to the new domain "DomainB" access to our reports?
We are unable to add DomainB users to our AD security groups so I have created a windows groups called SSRS_DomainB_Users and given them access to our parent folder and also added them into site settings as a system user.
What is the best way to deal with this?
Users in DomainB will eventually be added to DomainA and DomainB will then be deleted.
One of the users I am testing with gets an error message :
User 'Domain name/user' does not have the required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Thanks

Hi Nasa1999,
According to your description, you want your reports can be accessed by user from different domain. Right?
In this scenario, we should do Internet Deployment for your reports so that users from different domain can access the reports. Please the articles below:
Planning for Extranet or Internet Deployment
Using Reporting Services in an Internet/Extranet Environment
SQL Server 2008 Reporting Services
for Internet deployment
Reference:
SSRS reports
global access
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Database Studio 7.9.08.09 - Could not access to user management; Deleting old settings and reinstallation did not bring a change -- database studio deinstallation cannot be performed anymore

Hi Community,
for a few months I have been struggling with a SAP Max DB database Studio issue and finally, I had to give up the idea of being able to fix this on my own. I am desperately seeking for help and I hope that you may be able to give me a hint, advice or even a solution.
This is what happened:
I used to run Windows 7 on 32bit. I also had Database Studio installed - which was running fine then.
After a harware upgrade, I am running now Windows 7 on a 64 bit System. All my files from my local disk (C:\) have been restored and copied onto my new system.
I reinstalled Database Studio Version 7.9.08.09 onto my new System. But on the first try to start the program I received the error that said "Could not Access to user Management.See Window -> Show View-> Event Log Viewer for more Details."
However the Event Log Viewer was empty.
After searching the web for a solution, I followed the advice given in this community and deinstalled Database Studio and deleted the C.\Users\MyAccount\sdb folder manually.
I reinstalled Database Studio and started it as Administrator.
However, the error is still appearing.
And, what makes it even worse is : now I am not able to uninstall Database Studio anymore.
When I run SAP MaxDB Installation Manager and select the instance of database Studio to be uninstallled I am receiving the error:
"ERR: Unhandled Exception: Can't call method: "GenPackageList" on an undefined value at SDB/Install/Gui/Dialogs/SelectInstance.pm line 328"
Any advice is highly appreciated.
Thanks,
Agnieszka

Hello Yashwanth,
thank you for your quick Response.
Yes, I downloaded and installed the 64 bit Version of dbstudio.
I downloaded and ran the following .exe file: maxdb-studio-win-64bit-x86_64-7_9_08_09.exe
I am running the following Java-Version:
Java Plug-in 1.6.0_45
Using JRE version 1.6.0_45-b06 Java HotSpot(TM) Client VM
I myself am not a SAP customer. However, the Company I am working for is a SAP customer.
Can you explain in Detail, how to create a ticket with SAP?
Thanks,
Agnieszka

HT4798 How do I gain access to Users & Groups preferences when I cannot even log in.

I only have one apple ID linked and I cannot reset my password via the pop up box and cannot access the user groups as I cannot even log in.
Can anyone help.
Thanks
Matt

Reset Password
OS X 10.6 Snow Leopard
Follow the instructions in second and third boxes.
Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631

Windows 7 Desktop synchronisation - Windows cannot access \\server\users\name\desktop

Hi there
My client has a laptop which won’t load the desktop when disconnected from the network. When you log on (while disconnected) you get the error
“Windows cannot access \\server\users\name\desktop”
Works as expected while connected to the network.
The server is a Windows Small Business Server 2003 with active directory etc. and roaming profiles turned on. This issue does not occur on other workstations/laptops.
When I check the Users folder on the local system drive there is not a desktop folder. I assume this is the issue although I’m not sure how you would force windows to create one or why one hasn’t been created?
This is a brand new laptop so my initial reaction was to reset the laptop to factory state and then add the laptop back in to the domain. After this process the issue was still present!
I guess the only thing I should mention is that this was shipped as a Home Premium laptop and was then upgraded to Professional using an upgrade key.
I have checked Control Panel, System & Security, System, Advanced, User Profiles and the account shows as Local with Roaming Profiles greyed out.
Any ideas?
Martyn Fewtrell
[email protected]
Martyn Fewtrell TNC (IT Solutions) Ltd Email: [email protected] Web: http://www.tncit.co.uk

Hi,
I am just writing to check the status of this thread. Was the information provided in previous
reply helpful to you? Do you have any further questions or concerns? Please feel free to let us know.
Regards,
Alex Zhao
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Alex Zhao
TechNet Community Support

How can I access my user folder on a second boot partition?

Hi there. Thank you for reading this. I am at a bit of a loss although I have searched several forums to find someone having the same problem:
I use my Macbook Pro in the office and at home. To keep things strictly apart and have to separate Time Machine backup procedures, I have divided my harddrive into two boot partitions ('office' and 'private') and installed Mountain Lion on both of them. Now occasionally when I am at the office I would like to access my user folder on 'private' to retrieve a file from the documents folder there (e.g. a paper I gave in my free time but would like to send to a colleague). Now although I see the 'private' volume, and the other user folder and the Documents folder in it with a red 'No Access' badge, even when I set read/write permissions via Command-I > Permissions for my current account, I do not see any files in it apart from Microsoft User Data. I have tried enabling the root user but with the sam result.
Do I really have to shut down the computer and boot with the 'private' boot volume in order to access the files on 'private'>user?
Looking forward to your suggestions! Thank you in advance!
Christian

To solve this issue permanently, is to first disconnect both TimeMachine drives.
Boot into one partition and consider it history, make a note of everything, apps, export bookmarks, serial keys and files to a regular external drive. (non TimeMachine)
If on a hard drive, consider the first partition for performance, the second one is going to be slower. (SSD no need)
Next what you do is boot into the first partition and use Disk Utility to erase (with zero option if a hard drive) the other partition. Then use Carbon Copy Cloner to clone the first partition to the second. (should be about equal sizes or tweak before cloning.)
Repair permissions on both partitions in Disk Utility.
Next boot into the second partition and install/uninstall apps and files. etc and set it backup up the way you had it.
Once your sure, then update TimeMachine for each one.
Now you will be able to easily access the other bootable partition as long as your logged into the same account name on the first partition., in other words you can access the same named account on both partitions and trade files without rebooting.
Because it's a clone, you have the same access privileges to the files on the other partition.
If your a power user, your going to find bootable clones are a much superior option than TimeMachine
Most commonly used backup methods

Best practice for select access to users

Not sure if this is the correct forum to post, if not then let me know where should I post.
From my understanding this is the best forum to ask this questions.
Are you aware of any "Best Practice Document" to grant select accesses to users on databases. These users are developers which select data out of database for the investigation and application bug fix.
From time to time user want more and more access to different tables so that they can do investigation properly.
Let me know if there exists a best practice document around this space.
Asked in this forum as this is related to PL/SQL access.

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
Are you aware of any "Best Practice Document" to grant select accesses to users on databases. These users are developers which select data out of database for the investigation and application bug fix.
From time to time user want more and more access to different tables so that they can do investigation properly.
Let me know if there exists a best practice document around this space.
>
There are many best practices documents about various aspects of security for Oracle DBs but none are specific to developers doing invenstigation.
Here is the main page for Oracles' OPAC white papers about security.
http://www.oracletechnetwork-ap.com/topics/201207-Security/resources_whitepaper.cfm
Take a look at the ones on 'Oracle Identity Management' and on 'Developers and Identity Services'.
http://www.dbspecialists.com/files/presentations/implementing_oracle_11g_enterprise_user_security.pdf
This paper by Database Specialists shows how to use Oracle Identity Management to limit access to users such as developers through the use of roles. It shows some examples of users using their own account but having limited privileges based on the role they are given.
http://www.dbspecialists.com/files/presentations/implementing_oracle_11g_enterprise_user_security.pdf
And this Oracle White Paper, 'Oracle Database Security Checklist', is a more basic security doc that discusses the entire range of security issues that should be considered for an Oracle Database.
http://www.oracle.com/technetwork/database/security/twp-security-checklist-database-1-132870.pdf
You don't mention what environment (PROD/QA/TEST/DEV) you are even talking about or whether the access is to deal with emergency issues or general reproduction and fixing of bugs.
Many sites create special READONLY roles, eg. READ_ONLY_APP1, and then grant privileges to those roles for tables/objects that application uses. Then that role can be granted to users that need privileges for that application and can be revoked when they no longer need it.
Some sites prefer creating special READONLY users that have those read only roles. If a user needs access the DBA changes the password and provides the account info to the user. When the user has completed their duties the DBA resets the password to something no one else knows.
Those special users have auditing on them and the user using them is responsible for all activity recorded in the logs during the time the user has access to that account.
In general you grant the minimum privileges needed and revoke them when they are no longer needed; generally through the use of roles.
>
Asked in this forum as this is related to PL/SQL access.
>
Please explain that. Your question was about 'access to different tables'. How does PL/SQL access fit into that?
The important reason for the difference is that access is easily controlled thru the use of roles but in named PL/SQL blocks roles are disabled. So those special roles and accounts mentioned above are well-suited to allowing developers to query data but are not well-suited if the user needs to execute PL/SQL code belonging to another schema (the app schema).

Unable to provision Business Rules access for users

Hi all,
Our analytic server is properly configured in Shared Services : we can correctly create users, provision Essbase access for those users, change password, etc...
An application business rules is visible in the left pane of shared services, but we are not able to provision Business rules access for users.
When we try to provision access for a user, we have only access to the Analytic properties.
What's going wrong ?

It sounds like the user you login to HSS with hasn't been assigned with "Provisioning Mgr" rights to business rules.
Get the HSS admin user to grant you these rights and you should then be able to provision users to use Business RUles.
Gee

How do i reset admin password. no disc but system automativally logs me in as administrator and can access root user mode

I recenly got this macbook, MA&00LL/A, max OS X, V:10.4.11, 2GHz IntelCore 2 duo, 2GHz, When I power up it automatically logs me on as administrator but prompts for password when I try to access/change certain features. I got the macbook from my cousin who has forgot password and has lost disc. I can access root user mode but as iam unfamiliar with apple I am hesitant to delete anything without making things worse. Is their anyway I can reset this admin password without the disc or simply delete this user and reconfigure system as myself as administrator. step by step instructions would be appreciated at this stage till i familiarize myself more. Any help would be greatly appreciated. If it came down to buying a disc, how much roughly do these cost??? thanks again

If you don't have your install disks you can get the 10.4 gray disks by calling Apple Store Customer Service at 1-800-676-2775 They can send them to you for about $16 per disk plus S & H. Just give them your serial number and they'll know which ones you need.
To find your serial number go to the Apple in the upper left corner and select About This Mac, then click on More Info, the System Profiler will then come up. The Serial Number (System) is down near the bottom of the Hardware Overview list.
If you don't have your install disc handy,then follow these steps
1. Start up in single-user mode (hold Command-S as thecomputer starts up).
2. Type: mount -uw /
3. Press Return.
4. Type this: passwd (user's short name) Replace "(user's shortname)" with the short name of the user account whose password you wish to reset. If you are not sure what the account name is, you can get a list of usernames by typing: ls /Users
5. Press Return.
6. Enter a new user password.
7. Press Return.
8. Type: reboot
9. Press Return.

RAR: Risk resolution options , Remove access from user is disabled

Hi All,
In RAR , After risk analysis, if we click on risk description 3 Risk resolution options are there.
Mitigate Risk
Remove access from user
Delimit access for user
In these options mitigate risk only working.I am using GRC SP 5.
How about other two options , save button is disabled.How to enable this?
can we remove/delimit access to user using these options? any body tested these options?
Thanks n Regards,
Joseph

Joseph,
These functionalities do not exist in the tool and these buttons have been in the RAR for past 2 years. SAP wants clients to use CUP for removing or delemiting access so I highly doubt this will ever work.
Alpesh

Accessing a user defined library - CLASSPATH

Hi all
First I will tell you what I have implmented, then I will discuss the problem.
My PATH (user variables) is set to c:\Program Files\Java\jdk1.6.0\bin and everything works
fine - I can compile and run from any directory.
When I open a shell (cmd.exe) my current working directory is:
C:\Documents and Settings\Paul Gain\Desktop>
I have a file in the same directory called Test.java
Here it is:
import pack.ClassPathTest;
class Test {
public static void main(String[] args) {
new ClassPathTest();
The package "pack" resides at C:\pack
There are two files within "pack" one is called ClassPathTest.java
and the other is called ClasspathTest.class
Here is the code:
package pack;
public class ClassPathTest {
public ClassPathTest() {
System.out.println("Hello Paul");
Obviously this program is nonsense, However, I want to find out
how to access a user defined library of classes that is in a seperate directory.
When I compile from the desktop with the command: javac Test.java
The compiler complains, here is the output:
C:\Documents and Settings\Paul Gain\Desktop>javac Test.java
Test.java:1: package pack does not exist
import pack.ClassPathTest;
^
Test.java:7: cannot find symbol
symbol : class ClassPathTest
location: class Test
new ClassPathTest();
^
2 errors
If I cut and paste "pack" into the desktop directory everything works as expected.
Because of this I believe the problem lies with the CLASSPATH of "pack".
I have tried all sorts of variations of CLASSPATH but to no avail.
for example under "system variables" in environment variables I have
used the following:
.;C:\pack
Which says look in the current working directory first and then in pack. But
that does not work (and yes I close the current shell and open a new one).
Once the CLASSPATH is set .;C:\pack and I compile again the compiler
moans and gives me this:
C:\Documents and Settings\Paul Gain\Desktop>javac Test.java
Test.java:1: package pack does not exist
import pack.ClassPathTest;
^
Test.java:7: cannot access ClassPathTest
bad class file: C:\pack\ClassPathTest.class
class file contains wrong class: pack.ClassPathTest
Please remove or make sure it appears in the correct subdirectory of the classpa
th.
new ClassPathTest();
^
2 errors
Obviously I am doing something wrong, can somebody please help me as I do not wish
to add my libraries in the same directory as my program. I have even tried to add c:\pack
to the PATH but that does not work either. HELP!
Regards
Paul

If you are currently in Desktop, you need your classpath to be:
.;C:\The "pack" package lies in "C:\"
If you are anywhere else, you need:
"C:\Documents and Settings\Paul Gain\Desktop;C:\""Test" lies in the first part, and the "pack" package still lies in "C:\".

Can't access my user profile with the supplied user information from Oracle

I can't access my user account at oracle.com with the supplied user name and password supplied by oracle email.
user = [email protected]

I have deleted all cookies and files, can you please give me some feedback asap. I am registered on an Oracle event that I need to be able to unregister but I can't do it since I can't access www.oracle.com.

Component access by user

Similar Messages

Maybe you are looking for