Component data transfer within flash

as read in an earlier post, flash 4 was user friendly, flash
8 is quite impossible, until you get used to it...
anyway, i need to transfer component data from say page 1 to
5 and store on to page 6 before sending.
i have no probs with Input text, using same name var. with
dynamic text.
i know it is simple but i have been trying for days
now.

If you're within a single running application, you really don't need XML to move data around inside it. I suppose you could do so anyway, if you're some kind of crazy masochist.
Though who knows what you mean by "transfering data within an application". Data tends to move around in one form or another in every application.

Similar Messages

Email form data from within Flash

Hi all,
I have searched the Interent and written to several forums
asking this same question however no one either seems to know the
answer or just does not want to advise me in any way. I have
however had a few responses however none of them paid off.
My Question:
I am in the process of creating a flash website and I am on
the last little function I wish to provide. I want to create a
flash contact us form as some people might not have an email client
set up therefore I don't want to just but a mailto URL in.
I have built the form and named the input text boxes, and
believe I have most of the action script complete. I need to know
how to use Coldfusion to validate the flash form and then send the
email with the form data in it. As far as I can understand in flash
I create a LoadVars method which puts all the form data in this and
when the user click the submit button flash should send the
loadvars to a CFC or simliar page. This coldfusion page
(server-side) handles the processing , i.e. validation reports back
if need be or continues to send the information to a predefined
email address i.e. [email protected]
Can some one please help either point me in a direction of a
tutorial(s) or provide me with an example of what I am trying to
do. I am currently running Flash 8 and Coldfusion 8 not sure if
this has any bearing on what I am trying to do. I am not sure if I
require Flash Remoting or not, however I do remember reading (not
sure if this is correct) Coldfusion has Flash Remoting integrated.
I appreciate any help, support or advise anyone can offer on
this issue. I am keen to get this moving as my project end date is
fast approaching.

Hi,
For sending email there is no need to use remoting...
please see this link...
=>
http://www.sephiroth.it/tutorials/flashPHP/email/
and if u not able to do it then i'll do it for you... with
nominal charge of 20$.
Thanks,
Ankur Patel.

MiFi: Does data transfer within the home network count as data usage

I want to use a MiFi with a wireless surveillance system, which can record 100s of GBs of video per month. If I send video to a PC all on the same network, does that count as data usage?

Traffic sent over the local network will not be counted against your MiFi/data plan. VZW charges for all traffic that is sent over thier wireless infrastructure/towers. If this your question is then that is the answer.
With that being said:
You can setup your cameras and disconnect the MiFi from the VZW network. There is a Disconnect button on the main page of the router admin page that allows you to do it. This would enable you to maintain the local network and confirm that the security system will work offline. After you confirm your camera to computer network is working you can reconnect it to VZW and see if you can access the computer / camera over the web.
As a local router the MiFi will perform just fine with your cameras and computers. There are certainly better routers you can purchase for that function but thats another subject. Its when you try to make your devices available over the internet where most people have problems. Since the MiFi is a 4G capabile device it is tied into the new SIM card and NAT network. In most cases public IP addresses are not assigned or accessible on the MiFi. This makes it very difficult to get through to your devices from a remote location (as I assume you want to do). Most users on this forum have not found a way around it other than reverting back to an older model like the MiFi 2200.

How to transfer quicken data from a flash drive to quicken essentials

How do I transfer my Quicken data from a flash drive to Quicken essentials with new Lion Os software?

https://qlc.intuit.com/app/full_page#

WDA-Flash Data transfer Frequency

Hi
I have some WDA program with Flash Island inside. I share some objects (tables) from WDA to Flash, and Flash make graphics.
So i have in WDA conext the requiered nodes (for each table) wich i fill in WDA and share it to Flash.
My doubt is about Data transfer frequency between WDA and Flash:
If i change a node content, ie. i fill the node again with the new table content, this node is shared automatically with Flash, thats good when i change all records from that node (table).
1. If i have a NODE_A with 100 records , if i only change the content for one specific record , does
all the node content (all 100 records) are transfered to Flash ?   I guess yes.
2. But if i have NODE_A (100 records) and i have other NODE_B (150 records) and i change the NODE_A content ; does NODE_B content are transfered also to Flash even this node has not changes ?
3. Suppose i have other Node (not table) with attribute to enter Date wich is shared to Flash , if i change that Date ,   does the nodes NODE_A and NODE_B are also transfered to Flash even these have not changes ?
4. If i do not make any change to nodes shared with Flash , when i make any event (press match code) or change some node or attribute wich are not shared to Flash   ; does nodes NODE_A and NODE_B and Node Date are transfered also to Flash ?
I know these are several questions, i need to know about this because if the nodes are transfered alwasy and with all node content transfered, then i will need to have minimum data in that nodes shared to WDA and even i will need to clear/refresh (object->invalidate) that nodes when Flash receives the data, this in order to have good performance and server work for the application.
Does somebody can give me some 'light' about this please ?
Best Regards
Frank

Hi Frank,
From my past experience with FlashIslands, what i understood is:
The context data is transferred from WDA to Flash whenever there is a change in any of the context nodes shared with Flash.
And when ever there is an event fired from Flash to WDA.
please find the answers for your questions below:
1. Yes all the node content will be transferred. Actually not only this node where you have made the change, but also all the nodes data which are shared with Flash will be transferred.
2. Yes. please see point 1.
3. Yes
4. As far as i know, No. As the change is in the content of a node which is not shared with Flash, there wont be any data transfer from WDA to Flash.
I hope this is clear!
Best Regards,
Srilatha

Insert step after data transfer is complete within TDMS package

Hello,
we want to start some jobs after data transfer is complete within TDMS package. For example we want to start the function DELETE_DATA_FOR_ALL_MI_DEVICES. Is this possible or is it possible to start any ABAP report or batchjob?
Kind regards,
Karlheinz

Dear Karlheinz,
It is possible starting DMIS SP07 where you will find an option on the process tree in the work center that says 'Customize Monitor'. This option will you guide through creation of new activities, deletion of existing activities. You have to however create a Z report that pertains to the new activity and maintain some activity definitions.
Regards,
Amit Sharma

Cost component split transfer for Profit center valuation in ke27

Dear All,
We have activated multiple valuation/transfer prices. Material ledger is also activated.
We want to transfer cost component split to CO-PA by ke27.
We have defined separate costing keys for access to actual cost estimate for legal and profit center valuations.
But cost component split transfer to COPA works only for legal valution. Even we have defined type of valution for profit center costing key -transfer cost component split and total costs.
What should be else customized to transfer cost components splitting in profit center valuation to CO-PA from actual cost estimates?
With best regards,
Kamila.

Hi,
I have assigned the same value fields used for legal valuation to column 2, which was pointed in message.
But now I got following message in ke27:
For actual data, value fields that were already populated before CO-PA valuation cannot be changed in valuation.
1. As a rule, value fields that were filled before CO-PA valuation - be it from SD or by a manual entry of a line item - can only be changed by means of user exits.
(Note that for plan data, CO-PA valuation always has priority over the values planned manually.)
2. The valuation steps in a CO-PA valuation strategy are numbered sequentially. These numbers determine the order in which the steps are carried out within that strategy. As a rule, value fields populated in one step can be used as a basis for calculating values for other value fields in a subsequent step.
Value fields that were populated in a previous step are generally not overwritten by subsequent steps.
The exception to this are steps that use a CO-PA user exit. User exits let you change individual value fields.
3. If you valuate using multiple material cost estimates simultaneously, this means that the values of different cost components within the same cost estimate are aggregated and then entered in one CO-PA value field. However, value fields that already contain data from a previous cost estimate are not overwritten by a later cost estimate. Consequently, you should assign value fields in Customizing so that the values of different cost estimates are entered in different sets of value fields.
4. When condition values are transferred to CO-PA value fields, note that condition types that are assigned to the same value field are added together. This is also the case when the condition types come from different costing sheets within the valuation strategy.
So does it mean we should define separate value fields for PC valuation?
With best regards,
Kamila.

Data transfer legacy

dear all
Can eny one tell me about data transfer legacy?
How are modules interagted and what are means of data transfer for intra module.
Thanks in advance.

Hi,
You would use LSMW to upload master data and either BDC/BAPI for uploading transaction data.
Visit the following link:
Re: sap general
Where you would find more information about BDC and LSMW.
For information regarding LSMW steps visit the following link:
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
http://help.sap.com/bp_blv1500/BL_US/html/dataconv_lsmw.htm
The SAP System consists of a number of components that are completely integrated with one another. This integration allows the various departments and units of an enterprise to share and maintain the same information.
Purchasing is a component of Materials Management (MM). The Materials Management (MM) module is fully integrated with the other modules of the SAP System. It supports all the phases of materials management: materials planning and control, purchasing, goods receiving, inventory management, and invoice verification.
The tasks of the MM Purchasing component are as follows:
    External procurement of materials and services
    Determination of possible sources of supply for a requirement identified by the materials planning and control system or arising directly within a user department
    Monitoring of deliveries from and payments to vendors
Good communication between all participants in the procurement process is necessary for Purchasing to function smoothly.
<b>Integration</b>
Purchasing communicates with other modules in the SAP System to ensure a constant flow of information. For example, it works side by side with the following modules:
    Controlling (CO)
The interface to the cost accounting system (Controlling) can be seen above all in the case of purchase orders for materials intended for direct consumption and for services, since these can be directly assigned to a cost center or a production order.
    Financial Accounting (FI)
Purchasing maintains data on the vendors that are defined in the system jointly with Financial Accounting. Information on each vendor is stored in a vendor master record, which contains both accounting and procurement information. The vendor master record represents the creditor account in financial accounting.
Through PO account assignment, Purchasing can also specify which G/L accounts are to be charged in the financial accounting system.
    Sales and Distribution (SD)
Within the framework of materials planning and control, a requirement that has arisen in the Sales area can be passed on to Purchasing. In addition, when a requisition is created, it can be directly assigned to a sales order.
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Hope this will help.
Regards,
Naveen.

Visualizing MII data in Xcelsius / Flash

I am visualizing some MII data using Xcelsius 2008. For the most part I have been successful, particularly when visualizing within an MII session. However there are some cases where my users will encounter a Flash error #2048, which is related to some security within Flash that will not allow cross-domain access to data.
You may ask, if you are within the MII environment why would it be cross domain. Well, as it turns out Flash does not use a very complex mechanism for determining the domain, if the shortcut that my users use to access MII is
http://<server>:50000/MII
instead of
http://<server>.<domain>.<company>.net:50000/XMII
Flash thinks that this is a cross-domain call if the URL embedded in Xcelsius uses the fully qualified domain name.
While I could send out new shortcuts to everyone, there are other issues. And some future initiatives that may require cross-domain calls.
When Flash encounters a cross domain call, it looks for a policy file on the root of the datasource called crossdomain.xml which may look something like
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM
"http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="master-only"/>
     <allow-access-from domain="*"/>
     <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
</cross-domain-policy>
There are some SDN posts detailing how to get this file into the root on an ABAP WAS, however nothing about how to do it on a Java only server.   It would need to be accessible at:
http://<server>.<domain>.<company>.net:50000/crossdomain.xml
I realize this post crosses several different SAP technologies, any help would be appreciated, or direction on where I should post this.
Rod

I am glad that I found this thread, because I needed to put a custom crossdomain.xml file in the root folder of a NetWeaver Application Server (Java) CE 7.2, so that an external Adobe Flex application could call some web services of the MII instance that resides in this NetWeaver AS. This thread gave me a good start point for investigation and tests.
In my case, I had to add the crossdomain.xml file to this jar file:
<drive letter>:\usr\sap\<SID>\J17\j2ee\cluster\apps\sap.com\tc~je~crossdomain~xml~app\servlet_jsp\crossdomain.xml\root\WEB-INF\lib\ tc~je~crossdomain~xml~web_api.jar
I renamed the original crossdomain.xml file that was in the jar file and replaced it with the custom crossdomain.xml file. This made the call to [http://<servername>:<port>/crossdomain.xml] on a browser bring my custom crossdomain.xml file .
I just found it curious that this seemed to be required specifically for the crossdomain.xml file to be on the root (from the file caller's perspective). For any other files to be on the root (from the file caller's perspective), this is the folder which the files have to be copied to:
<drive letter>:\usr\sap\<SID>\J17\j2ee\cluster\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
Edited by: Daniel Takara on Nov 2, 2010 6:29 PM

Issues with data transfer / connectivity

Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
Thanks

You can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com

Possible network issues preventing successful application data transfer?

Hello all.
We are having a few issues with a specific set up here at work involving Oracle 11, and Oracle 9 databases and I was hoping someone with a fair idea of how Oracle configurations work when it comes to network connectivity and data transfer would mind sharing their opinion on the matter.
First off, a bit of background. I'm a network security engineer by trade and my experience when it comes to the application side of things, specifically databases is inherently weak; so I apologise if my terminology or logic is slightly off here.
Basically what I'm trying to determine is where a fault lies between our users using a terminal server and a remote Oracle SQL database that should service their requests.
The problem lies wherein the user will utilise the 'sqlplus' application invoked from a Windows command prompt window, and expect to be able login and query a database. I believe we have two versions available to use, version 9 which is not actually in production but able to be used for testing and version 11 which is active in production.
When accessing Oracle 11 servers will hang where we expect to see a successful connection followed by a healthy looking "SQL>" prompt data transfer appears to stall as follows:
C:\>sqlplus username/[email protected]
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:12:17 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
*hangs here*If we try on the Oracle 9 setup things look fine initially:
C:\>sqlplus username/[email protected]
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:19:20 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - ProductionHowever once connected to the Oracle 9 box; if we run a query similar to:
sqlplus username/[email protected]
select * from <database> where rownum < 10;This will again hang.
That said however, if we try and run a query similar to:
sqlplus username/[email protected]
select * from <database> where rownum < 5;This will return 4 rows of usable data, without issue.
Our systems engineer provided me with a SQLNET trace from the server side and believes he's identified where it occurs:
[21-SEP-2010 16:06:42:989] nsdo: entry
[21-SEP-2010 16:06:42:989] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
[21-SEP-2010 16:06:42:989] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:990] nsdo: nsctx: state=8, flg=0x420c, mvd=0
[21-SEP-2010 16:06:42:990] nsdo: gtn=156, gtc=156, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:990] nsdo: switching to application buffer
[21-SEP-2010 16:06:42:990] nsrdr: entry
[21-SEP-2010 16:06:42:990] nsrdr: recving a packet
[21-SEP-2010 16:06:42:990] nsprecv: entry
[21-SEP-2010 16:06:42:990] nsprecv: reading from transport...
[21-SEP-2010 16:06:42:990] nttrd: entry
#    HANG OCCURS HERE
[21-SEP-2010 16:10:13:347] ntt2err: entry
[21-SEP-2010 16:10:13:347] ntt2err: soc 25 error - operation=5, ntresnt[0]=517, ntresnt[1]=131, ntresnt[2]=0
[21-SEP-2010 16:10:13:347] ntt2err: exit
[21-SEP-2010 16:10:13:347] nttrd: exit
[21-SEP-2010 16:10:13:347] nsprecv: transport read error
[21-SEP-2010 16:10:13:347] nsprecv: error exit
[21-SEP-2010 16:10:13:347] nserror: entry
[21-SEP-2010 16:10:13:347] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=131, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[21-SEP-2010 16:10:13:348] nsrdr: error exit
[21-SEP-2010 16:10:13:348] nsdo: nsctxrnk=0
[21-SEP-2010 16:10:13:348] nsdo: error exit
[21-SEP-2010 16:10:13:348] nioqrc: wanted 1 got 0, type 0
[21-SEP-2010 16:10:13:348] nioqper: error from nioqrc
[21-SEP-2010 16:10:13:348] nioqper:    nr err code: 0
[21-SEP-2010 16:10:13:348] nioqper:    ns main err code: 12547
[21-SEP-2010 16:10:13:348] nioqper:    ns (2) err code: 12560
[21-SEP-2010 16:10:13:348] nioqper:    nt main err code: 517
[21-SEP-2010 16:10:13:348] nioqper:    nt (2) err code: 131
[21-SEP-2010 16:10:13:349] nioqper:    nt OS   err code: 0
[21-SEP-2010 16:10:13:349] nioqer: entry
[21-SEP-2010 16:10:13:349] nioqer: incoming err = 12151
[21-SEP-2010 16:10:13:349] nioqce: entry
[21-SEP-2010 16:10:13:349] nioqce: exit
[21-SEP-2010 16:10:13:349] nioqer: returning err = 3113
[21-SEP-2010 16:10:13:349] nioqer: exit
[21-SEP-2010 16:10:13:349] nioqrc: exit
[21-SEP-2010 16:10:13:349] nioqds: entry
[21-SEP-2010 16:10:13:349] nioqds: disconnecting...
[21-SEP-2010 16:10:13:349] nsdo: entry
[21-SEP-2010 16:10:13:349] nsdo: cid=0, opcode=67, *bl=0, *what=1, uflgs=0x2, cflgs=0x3
[21-SEP-2010 16:10:13:350] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:10:13:350] nsdo: nsctx: state=1, flg=0x420c, mvd=0
[21-SEP-2010 16:10:13:350] nsdo: nsctxrnk=0
[21-SEP-2010 16:10:13:350] nsdo: error exitFrom the client log side, it looks like this:
[21-SEP-2010 16:06:42:886] nsdo: entry
[21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
[21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
[21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:886] nsdofls: entry
[21-SEP-2010 16:06:42:886] nsdofls: DATA flags: 0x0
[21-SEP-2010 16:06:42:886] nsdofls: sending NSPTDA packet
[21-SEP-2010 16:06:42:886] nspsend: entry
[21-SEP-2010 16:06:42:886] nspsend: plen=17, type=6
[21-SEP-2010 16:06:42:886] nttwr: entry
[21-SEP-2010 16:06:42:886] nttwr: socket 1724 had bytes written=17
[21-SEP-2010 16:06:42:886] nttwr: exit
[21-SEP-2010 16:06:42:886] nspsend: packet dump
[21-SEP-2010 16:06:42:886] nspsend: 00 11 00 00 06 00 00 00 |........|
[21-SEP-2010 16:06:42:886] nspsend: 00 00 03 05 1C 01 01 01 |........|
[21-SEP-2010 16:06:42:886] nspsend: 0F                       |.       |
[21-SEP-2010 16:06:42:886] nspsend: 17 bytes to transport
[21-SEP-2010 16:06:42:886] nspsend: normal exit
[21-SEP-2010 16:06:42:886] nsdofls: exit (0)
[21-SEP-2010 16:06:42:886] nsdo: nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: normal exit
[21-SEP-2010 16:06:42:886] nsdo: entry
[21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
[21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
[21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
[21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
[21-SEP-2010 16:06:42:886] nsdo: switching to application buffer
[21-SEP-2010 16:06:42:886] nsrdr: entry
[21-SEP-2010 16:06:42:886] nsrdr: recving a packet
[21-SEP-2010 16:06:42:886] nsprecv: entry
[21-SEP-2010 16:06:42:886] nsprecv: reading from transport...
[21-SEP-2010 16:06:42:886] nttrd: entry
#    HANG OCCURS HERE
#    Need to <CTRL C> twice to kill
#I've tried searching the net for similar occurrences of some of the interesting looking trace data but there appears to be limited information available, none of which is terribly helpful.
What I'm really after is either someone who has had this issue before, or someone who can better interpret the error output from the trace files and perhaps give me an idea of what's causing it to occur. Specifically whether that error text above relates to a failed connection on the underlying network connectivity side of things or whether it may be something on a higher level within the application layers. We have done packet dumps on firewalls to check the traffic as it traverses the firewall but there are no anomalies that I can see which may be contributing to the issue at hand.
I have organised for some testing to occur within the next 24 hours as there is a Cisco ASA Firewall that sits in the network path that is performing inspection on packets travelling through it. The inspection for SQLNET specifically is disabled, but we intend to enable this once more for testing to see whether it makes a difference. I'm not entirely confident it will however, and until we do get a chance to test any constructive input or alternate ideas will be greatly appreciated. I'm trying to cover as many bases as possible here.
Cheers,
Josh.

So some further testing doesn't show anything interesting. But that said here's a look at a TCP Dump for the Oracle 11 session that hangs:
SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
tcpdump: WARNING: bond0: no IPv4 address assigned
tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
21:55:43.781596 IP (tos 0x0, ttl 126, id 24439, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.62008 > 172.x.x.x.1521: S, cksum 0x4d0a (correct), 2416392635:2416392635(0) win 64512 <mss 1380,nop,nop,sackOK>
21:55:43.782454 IP (tos 0x0, ttl 59, id 50281, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: S, cksum 0xc0ae (correct), 3123579836:3123579836(0) ack 2416392636 win 49680 <mss 1460,nop,nop,sackOK>
21:55:43.783311 IP (tos 0x0, ttl 126, id 24440, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0xb382 (correct), 1:1(0) ack 1 win 64512
21:55:43.787142 IP (tos 0x0, ttl 126, id 24441, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 1:245(244) ack 1 win 64512
21:55:43.788504 IP (tos 0x0, ttl 59, id 50282, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xed72 (correct), 1:1(0) ack 245 win 49436
21:55:43.859023 IP (tos 0x0, ttl 59, id 50283, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: P, cksum 0xe166 (correct), 1:9(8) ack 245 win 49680
21:55:43.860392 IP (tos 0x0, ttl 126, id 24445, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 245:489(244) ack 9 win 64504
21:55:43.861773 IP (tos 0x0, ttl 59, id 50284, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xeb82 (correct), 9:9(0) ack 489 win 49680
21:55:43.861908 IP (tos 0x0, ttl 59, id 50285, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.62008: P 9:41(32) ack 489 win 49680
21:55:43.865341 IP (tos 0x0, ttl 126, id 24446, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.62008 > 172.x.x.x.1521: P 489:645(156) ack 41 win 64472
21:55:43.867017 IP (tos 0x0, ttl 59, id 50286, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.62008: P 41:168(127) ack 645 win 49680
21:55:43.874836 IP (tos 0x0, ttl 126, id 24447, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.62008 > 172.x.x.x.1521: P 645:682(37) ack 168 win 64345
21:55:43.876405 IP (tos 0x0, ttl 59, id 50287, offset 0, flags [DF], proto: TCP (6), length: 226) 172.x.x.x.1521 > 125.x.x.x.62008: P 168:354(186) ack 682 win 49680
21:55:43.995921 IP (tos 0x0, ttl 126, id 24451, offset 0, flags [DF], proto: TCP (6), length: 1420) 125.x.x.x.62008 > 172.x.x.x.1521: . 682:2062(1380) ack 354 win 64159
21:55:43.995978 IP (tos 0x0, ttl 126, id 24452, offset 0, flags [DF], proto: TCP (6), length: 671) 125.x.x.x.62008 > 172.x.x.x.1521: P 2062:2693(631) ack 354 win 64159
21:55:43.999910 IP (tos 0x0, ttl 59, id 50288, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xe18d (correct), 354:354(0) ack 2693 win 49680
21:55:44.015402 IP (tos 0x0, ttl 126, id 24455, offset 0, flags [DF], proto: TCP (6), length: 326) 125.x.x.x.62008 > 172.x.x.x.1521: P 2693:2979(286) ack 354 win 64159
21:55:44.020491 IP (tos 0x0, ttl 59, id 50289, offset 0, flags [DF], proto: TCP (6), length: 1420) 172.x.x.x.1521 > 125.x.x.x.62008: . 354:1734(1380) ack 2979 win 49680
21:55:44.020789 IP (tos 0x0, ttl 59, id 50290, offset 0, flags [DF], proto: TCP (6), length: 671) 172.x.x.x.1521 > 125.x.x.x.62008: P 1734:2365(631) ack 2979 win 49680
21:55:44.021015 IP (tos 0x0, ttl 59, id 50291, offset 0, flags [DF], proto: TCP (6), length: 355) 172.x.x.x.1521 > 125.x.x.x.62008: P 2365:2680(315) ack 2979 win 49680
21:55:44.022489 IP (tos 0x0, ttl 126, id 24457, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0x9ea4 (correct), 2979:2979(0) ack 2365 win 64512
21:55:44.148236 IP (tos 0x0, ttl 126, id 24461, offset 0, flags [DF], proto: TCP (6), length: 215) 125.x.x.x.62008 > 172.x.x.x.1521: P 2979:3154(175) ack 2680 win 64197
21:55:44.152125 IP (tos 0x0, ttl 59, id 50292, offset 0, flags [DF], proto: TCP (6), length: 187) 172.x.x.x.1521 > 125.x.x.x.62008: P 2680:2827(147) ack 3154 win 49680
21:55:44.174040 IP (tos 0x0, ttl 126, id 24462, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
21:55:44.732635 IP (tos 0x0, ttl 126, id 24482, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
21:55:44.735346 IP (tos 0x0, ttl 59, id 50294, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xcefc (correct), 3632:3632(0) ack 4168 win 49680
21:56:17.076742 IP (tos 0x0, ttl 126, id 25631, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: R, cksum 0x942e (correct), 4168:4168(0) ack 2827 win 0
*SQL session hangs here*The 'RESET' occurs when I kill the client using CTRL+C after a long period of inactivity, not during the session itself.
And then.. Here's a successful login and query of 7 rows on the Oracle 9 database from a network perspective:
SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
tcpdump: WARNING: bond0: no IPv4 address assigned
tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
21:53:27.598450 IP (tos 0x0, ttl 126, id 19396, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.61937 > 172.x.x.x.1521: S, cksum 0xc9b4 (correct), 2519356327:2519356327(0) win 64512 <mss 1380,nop,nop,sackOK>
21:53:27.612189 IP (tos 0x0, ttl 53, id 46015, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: S, cksum 0x1cdb (correct), 1010936359:1010936359(0) ack 2519356328 win 49680 <mss 1460,nop,nop,sackOK>
21:53:27.612905 IP (tos 0x0, ttl 126, id 19398, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0x0faf (correct), 1:1(0) ack 1 win 64512
21:53:27.616233 IP (tos 0x0, ttl 126, id 19399, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 1:282(281) ack 1 win 64512
21:53:27.629987 IP (tos 0x0, ttl 53, id 46016, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4886 (correct), 1:1(0) ack 282 win 49680
21:53:27.692135 IP (tos 0x0, ttl 53, id 46017, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: P, cksum 0x3d6e (correct), 1:9(8) ack 282 win 49680
21:53:27.693603 IP (tos 0x0, ttl 126, id 19402, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 282:563(281) ack 9 win 64504
21:53:27.707460 IP (tos 0x0, ttl 53, id 46018, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4765 (correct), 9:9(0) ack 563 win 49680
21:53:27.707883 IP (tos 0x0, ttl 53, id 46019, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.61937: P 9:41(32) ack 563 win 49680
21:53:27.711950 IP (tos 0x0, ttl 126, id 19403, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.61937 > 172.x.x.x.1521: P 563:719(156) ack 41 win 64472
21:53:27.725971 IP (tos 0x0, ttl 53, id 46020, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.61937: P 41:168(127) ack 719 win 49680
21:53:27.734468 IP (tos 0x0, ttl 126, id 19405, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.61937 > 172.x.x.x.1521: P 719:756(37) ack 168 win 64345
21:53:27.748270 IP (tos 0x0, ttl 53, id 46021, offset 0, flags [DF], proto: TCP (6), length: 199) 172.x.x.x.1521 > 125.x.x.x.61937: P 168:327(159) ack 756 win 49680
21:53:27.878720 IP (tos 0x0, ttl 126, id 19409, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
21:53:28.994991 IP (tos 0x0, ttl 126, id 19443, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
21:53:29.010680 IP (tos 0x0, ttl 53, id 46023, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3d83 (correct), 1276:1276(0) ack 1826 win 49680
21:53:32.561849 IP (tos 0x0, ttl 53, id 46024, offset 0, flags [DF], proto: TCP (6), length: 989) 172.x.x.x.1521 > 125.x.x.x.61937: P 327:1276(949) ack 1826 win 49680
21:53:32.710661 IP (tos 0x0, ttl 126, id 19550, offset 0, flags [DF], proto: TCP (6), length: 223) 125.x.x.x.61937 > 172.x.x.x.1521: P 1826:2009(183) ack 1276 win 63237
21:53:32.724384 IP (tos 0x0, ttl 53, id 46025, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3ccc (correct), 1276:1276(0) ack 2009 win 49680
21:53:32.732636 IP (tos 0x0, ttl 53, id 46026, offset 0, flags [DF], proto: TCP (6), length: 133) 172.x.x.x.1521 > 125.x.x.x.61937: P 1276:1369(93) ack 2009 win 49680
21:53:32.739922 IP (tos 0x0, ttl 126, id 19553, offset 0, flags [DF], proto: TCP (6), length: 947) 125.x.x.x.61937 > 172.x.x.x.1521: P 2009:2916(907) ack 1369 win 63144
21:53:32.763266 IP (tos 0x0, ttl 53, id 46027, offset 0, flags [DF], proto: TCP (6), length: 329) 172.x.x.x.1521 > 125.x.x.x.61937: P 1369:1658(289) ack 2916 win 49680
21:53:32.770925 IP (tos 0x0, ttl 126, id 19555, offset 0, flags [DF], proto: TCP (6), length: 78) 125.x.x.x.61937 > 172.x.x.x.1521: P 2916:2954(38) ack 1658 win 64512
21:53:32.784774 IP (tos 0x0, ttl 53, id 46028, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 1658:1836(178) ack 2954 win 49680
21:53:32.787455 IP (tos 0x0, ttl 126, id 19556, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
21:53:33.478760 IP (tos 0x0, ttl 126, id 19578, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
21:53:33.492256 IP (tos 0x0, ttl 53, id 46030, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34ce (correct), 2268:2268(0) ack 3063 win 49680
21:53:36.820908 IP (tos 0x0, ttl 53, id 46031, offset 0, flags [DF], proto: TCP (6), length: 472) 172.x.x.x.1521 > 125.x.x.x.61937: P 1836:2268(432) ack 3063 win 49680
21:53:36.824225 IP (tos 0x0, ttl 126, id 19733, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 3063:3080(17) ack 2268 win 63902
21:53:36.837345 IP (tos 0x0, ttl 53, id 46032, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34bd (correct), 2268:2268(0) ack 3080 win 49680
21:53:36.838015 IP (tos 0x0, ttl 53, id 46033, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 2268:2338(70) ack 3080 win 49680
21:53:36.839520 IP (tos 0x0, ttl 126, id 19734, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3080:3119(39) ack 2338 win 63832
21:53:36.853507 IP (tos 0x0, ttl 53, id 46034, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2338:2516(178) ack 3119 win 49680
21:53:36.855886 IP (tos 0x0, ttl 126, id 19735, offset 0, flags [DF], proto: TCP (6), length: 160) 125.x.x.x.61937 > 172.x.x.x.1521: P 3119:3239(120) ack 2516 win 63654
21:53:36.870292 IP (tos 0x0, ttl 53, id 46035, offset 0, flags [DF], proto: TCP (6), length: 99) 172.x.x.x.1521 > 125.x.x.x.61937: P 2516:2575(59) ack 3239 win 49680
21:53:36.879557 IP (tos 0x0, ttl 126, id 19738, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3239:3278(39) ack 2575 win 63595
21:53:36.893506 IP (tos 0x0, ttl 53, id 46036, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2575:2753(178) ack 3278 win 49680
21:53:36.895884 IP (tos 0x0, ttl 126, id 19739, offset 0, flags [DF], proto: TCP (6), length: 292) 125.x.x.x.61937 > 172.x.x.x.1521: P 3278:3530(252) ack 2753 win 63417
21:53:36.911464 IP (tos 0x0, ttl 53, id 46037, offset 0, flags [DF], proto: TCP (6), length: 305) 172.x.x.x.1521 > 125.x.x.x.61937: P 2753:3018(265) ack 3530 win 49680
21:53:36.913580 IP (tos 0x0, ttl 126, id 19740, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3530:3569(39) ack 3018 win 63152
21:53:36.927515 IP (tos 0x0, ttl 53, id 46038, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3018:3196(178) ack 3569 win 49680
21:53:36.938328 IP (tos 0x0, ttl 126, id 19742, offset 0, flags [DF], proto: TCP (6), length: 315) 125.x.x.x.61937 > 172.x.x.x.1521: P 3569:3844(275) ack 3196 win 64512
21:53:36.953008 IP (tos 0x0, ttl 53, id 46039, offset 0, flags [DF], proto: TCP (6), length: 183) 172.x.x.x.1521 > 125.x.x.x.61937: P 3196:3339(143) ack 3844 win 49680
21:53:36.961020 IP (tos 0x0, ttl 126, id 19743, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3844:3883(39) ack 3339 win 64369
21:53:36.974890 IP (tos 0x0, ttl 53, id 46040, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3339:3517(178) ack 3883 win 49680
21:53:36.977183 IP (tos 0x0, ttl 126, id 19744, offset 0, flags [DF], proto: TCP (6), length: 208) 125.x.x.x.61937 > 172.x.x.x.1521: P 3883:4051(168) ack 3517 win 64191
21:53:36.991461 IP (tos 0x0, ttl 53, id 46041, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 3517:3587(70) ack 4051 win 49680
21:53:36.993439 IP (tos 0x0, ttl 126, id 19747, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4051:4090(39) ack 3587 win 64121
21:53:37.007199 IP (tos 0x0, ttl 53, id 46042, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3587:3765(178) ack 4090 win 49680
21:53:37.011239 IP (tos 0x0, ttl 126, id 19748, offset 0, flags [DF], proto: TCP (6), length: 183) 125.x.x.x.61937 > 172.x.x.x.1521: P 4090:4233(143) ack 3765 win 63943
21:53:37.025767 IP (tos 0x0, ttl 53, id 46043, offset 0, flags [DF], proto: TCP (6), length: 210) 172.x.x.x.1521 > 125.x.x.x.61937: P 3765:3935(170) ack 4233 win 49680
21:53:37.027455 IP (tos 0x0, ttl 126, id 19750, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4233:4272(39) ack 3935 win 63773
21:53:37.041382 IP (tos 0x0, ttl 53, id 46044, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3935:4113(178) ack 4272 win 49680
21:53:37.044708 IP (tos 0x0, ttl 126, id 19751, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4272:4307(35) ack 4113 win 63595
21:53:37.058388 IP (tos 0x0, ttl 53, id 46045, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4113:4129(16) ack 4307 win 49680
21:53:37.060398 IP (tos 0x0, ttl 126, id 19752, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4307:4342(35) ack 4129 win 63579
21:53:37.073926 IP (tos 0x0, ttl 53, id 46046, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4129:4145(16) ack 4342 win 49680
21:53:37.088056 IP (tos 0x0, ttl 126, id 19753, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xf23e (correct), 4342:4342(0) ack 4145 win 63563
21:53:56.309909 IP (tos 0x0, ttl 126, id 20509, offset 0, flags [DF], proto: TCP (6), length: 176) 125.x.x.x.61937 > 172.x.x.x.1521: P 4342:4478(136) ack 4145 win 63563
21:53:56.325783 IP (tos 0x0, ttl 53, id 46047, offset 0, flags [DF], proto: TCP (6), length: 398) 172.x.x.x.1521 > 125.x.x.x.61937: P 4145:4503(358) ack 4478 win 49680
21:53:56.329152 IP (tos 0x0, ttl 126, id 20511, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
21:53:56.557234 IP (tos 0x0, ttl 126, id 20519, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
21:53:56.570496 IP (tos 0x0, ttl 53, id 46049, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24ea (correct), 4904:4904(0) ack 4495 win 49680
21:53:58.561449 IP (tos 0x0, ttl 53, id 46051, offset 0, flags [DF], proto: TCP (6), length: 441) 172.x.x.x.1521 > 125.x.x.x.61937: P 4503:4904(401) ack 4495 win 49680
21:53:58.602228 IP (tos 0x0, ttl 126, id 20579, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4495:4534(39) ack 4904 win 64512
21:53:58.615281 IP (tos 0x0, ttl 53, id 46052, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24c3 (correct), 4904:4904(0) ack 4534 win 49680
21:53:58.616571 IP (tos 0x0, ttl 53, id 46053, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 4904:5082(178) ack 4534 win 49680
21:53:58.745531 IP (tos 0x0, ttl 126, id 20584, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xead2 (correct), 4534:4534(0) ack 5082 win 64334
21:54:01.476582 IP (tos 0x0, ttl 126, id 20707, offset 0, flags [DF], proto: TCP (6), length: 53) 125.x.x.x.61937 > 172.x.x.x.1521: P 4534:4547(13) ack 5082 win 64334
21:54:01.492998 IP (tos 0x0, ttl 53, id 46054, offset 0, flags [DF], proto: TCP (6), length: 53) 172.x.x.x.1521 > 125.x.x.x.61937: P 5082:5095(13) ack 4547 win 49680
21:54:01.499924 IP (tos 0x0, ttl 126, id 20709, offset 0, flags [DF], proto: TCP (6), length: 50) 125.x.x.x.61937 > 172.x.x.x.1521: P, cksum 0xe469 (correct), 4547:4557(10) ack 5095 win 64321
21:54:01.500558 IP (tos 0x0, ttl 126, id 20710, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: F, cksum 0xeaba (correct), 4557:4557(0) ack 5095 win 64321
21:54:01.513561 IP (tos 0x0, ttl 53, id 46055, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: F, cksum 0x23ec (correct), 5095:5095(0) ack 4557 win 49680
21:54:01.513628 IP (tos 0x0, ttl 53, id 46056, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x23eb (correct), 5096:5096(0) ack 4558 win 49680
21:54:01.514175 IP (tos 0x0, ttl 126, id 20713, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xeab9 (correct), 4558:4558(0) ack 5096 win 64321The above is obviously fine, but it's really quite strange. I can get the Oracle 9 queries to hang if I select over 7 rows (8 being the point at which it dies).
So I can run
Sqlplus user/[email protected]
Select * from <blah> where rownum < 7;Over and over again, as many times as I like without issue.
But!.. As soon as I run
Sqlplus user/[email protected]
Select * from <blah> where rownum < 8;The session will hang, and from a network perspective there are no packets being transferred in either direction. It looks exactly like the Oracle 11 session in that the session is still ESTABLISHED from a client perspective but no data is flowing in either direction..
Does anyone have any idea why '8' is the magic number that would be causing it to hang? I'm really stuggling to see from a network perspective how this may be occuring, as above the TCPDump looks clean.
Unfortunately I don't have access do a dump on the client/server itself however, just on the network path. I guess that may be where we need to be looking next.
Thanks for the ideas so far all, much appreciated.
Josh.

MyRIO memory, data transfer and clock rate

Hi
I am trying to do some computations on a previously obtained file sampled at 100Msps using myRIO module. I have some doubts regarding the same. There are mainly two doubts, one regarding data transfer and other regarding clock rate.
1. Currently, I access my file (size 50 MB) from my development computer hard drive in FPGA through DMA FIFO, taking one block consisting of around 5500 points at a time. I have been running the VI in emulation mode for the time being. I was able to transfer through DMA from host, but it is very slow (i can see each point being transferred!!). The timer connected in while loop in FPGA says 2 ticks for each loop, but the data transfer is taking long. There could be two reasons for this, one being that the serial cable used is the problem, the DMA happens fast but the update as seen to the user is slower, the second being that the timer is not recording the time for data trasfer. Which one could be the reason?
If I put the file in the myRIO module, I will have to compile it each and every time, but does it behave the same way as I did before with dev PC(will the DMA transfer be faster)? And here too, do I need to put the file in the USB stick? My MAX says that there is 293 MB of primary disk free space in the module. I am not able to see this space at all. If I put my file in this memory, will the data transfer be faster? That is, can I use any static memory in the board (>50MB) to put my file? or can I use any data transfer method other than FIFO? This forum (http://forums.ni.com/t5/Academic-Hardware-Products-ELVIS/myRIO-Compile-Error/td-p/2709721/highlight/... discusses this issue, but I would like to know the speed of the transfer too.
2. The data in the file is sampled at 100Msps. The filter blocks inside FPGA ask to specify the FPGA clock rate and sampling rate, i created a 200MHz derived clock and mentioned the same, gave sampling rate as 100Msps, but the filter is giving zero results. Do these blocks work with derived clock rates? or is it the property of SCTL alone?
Thanks a lot
Arya

Hi Sam
Thanks for the quick reply. I will keep the terminology in mind. I am trying analyse the data file (each of the 5500 samples corresponds to a single frame of data) by doing some intensive signal processing algorithms on each frame, then average the results and disply it.
I tried putting the file on the RT target, both using a USB stick and using the RT target internal memory. I thought I will write back the delay time for each loop after the transfer has occured completely, to a text tile in the system. I ran the code my making an exe for both the USB stick and RT target internal memory methods; and compiling using the FPGA emulater in the dev PC VI. (A screenshot of the last method is attached, the same is used for both the other methods with minor modifications. )To my surprise, all three of them gave 13 ms as the delay. I certainly expect the transfer from RT internal memory faster than USB and the one from the dev PC to be the slowest. I will work more on the same and try to figure out why this is happening so.
When I transferred the data file (50MB) into the RT flash memory, the MAX shows 50MB decrease in the free physical memory but only 20MB decrease in the primary disk free space. Why is this so? Could you please tell me the differences between them? I did not get any useful online resources when I searched.
Meanwhile, the other doubt still persists, is it possible to run filter blocks with the derived clock rates? Can we specify clock rates like 200MHz and sampling rates like 100Msps in the filter configuration window? I tried, but obtained zero results.
Thanks and regards
Arya
Attachments:
Dev PC VI.PNG ‏33 KB
FPGA VI.PNG ‏16 KB
Delay text file.PNG ‏4 KB

Re: (forte-users) Delays in data transfer..server-to-client

I would try using DOM (distributed object manager) traces. trc:do:20 will
give you information on each messages sent from and received by the
partition. Levels are 1, 2, 5, 7, and 8, and trc:do:*:8 is very
verbose. trc:do:20:1 may tell you what you want to know. trc:do:1:1 will
give you a basic 1-line-per DOM event trace that may also be all you need.
Communications manager traces will tell you about network and socket-level
activity, but not about the sizes of the messages themselves. In addition,
the operating system makes decisions about physical packet size and
send/receive timing, so CM activities only generally map to actual network
activity.
-tdc
iPlanet Integration Server Engineering
At 09:24 AM 5/1/01 -0700, you wrote:
All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in
order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are
requesting
the data size and packet information. I did not see what I am looking for
using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10
flag, but
Forte' indicates that this flag is very verbose, the systems group hates
it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.

Jeff,
If the object you are passing does not require changes made to it in the
server partition to be returned, pass the object as copy input (pass by
value not reference). If it is necessary to pass the object as input, try
to pass only the attributes that are required to the remote partition
instead of the whole object.
Input/Output is normaly used with scalar variables. When a scalar is passed
to a remote partition, if the value is changed in that partition, the value
is not returned to the calling partition unless Input/Output is used.
Input/Output should not be used for object type parameters, if you need to
pass a reference, use Input only. If you can pass by value, use Copy Input.
You will notice a huge difference in performance changing from Input to Copy
input when passing large objects.
Hope this helps,
Travis Foote
Fortedeveloper.com Inc.
----- Original Message -----
From: "Jeff Bennett" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 01, 2001 9:24 AM
Subject: (forte-users) Delays in data transfer.. server-to-client
>
All,
We are experiencing delays in object transfer between server and client.The
delays are longer with large objects (a single object with an array ofobjects
that reflect the rows returned in a database) than small (ie: 10 rows vs400).
>
Does anyone have any (actual) experience using the various Forte' flags inorder
to show the actual size of the object/packets being passed between theserver
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6seconds or
so. The round trip fare however from the time the client makes the SOcall to
the time that it completes is in the 25-30 second range, leaving roughly20-25
seconds unaccounted for. I have brought in the network guys who arerequesting
the data size and packet information. I did not see what I am looking forusing
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10flag, but
Forte' indicates that this flag is very verbose, the systems group hatesit when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

N95 8GB reboots periodically in data transfer mode

I have a new N95 8GB running firmware v20. Unfortunately, when I use the genuine USB cable and select "Data Transfer Mode" the phone reboots 60 seconds after I connect the cable (and thereafter each 60 seconds when I don't touch the phone).
I have tried with a non-genuine cable and the behaviour is the same.
Coincidentally the "Power Save Time-out" is set to 60 seconds. When I change this to another value, say 40 seconds, then the above rebooting happens every 40 seconds.
This appears to be a phone bug and makes it extremely difficult to use data transfer mode, unless you can transfer files within the power save time-out period, or unless you are prepared to press a button on the phone within this period.
**Nokia please fix this**
See related post: /discussions/board/message?board.id=smartphones&thread.id=81967&view=by_date_ascending&page=1

Well,rotateme works perfectly for me and i have a n95 8gb too.So there are two things that might happening.
1.You are doing something wrong with the whole installation(does rotateme works when you install it?)
2.You downloaded your self a corrapted or somekind of a virus or a bug .sis file and installed it to your phone.
Why dont you try to download one other rotateme file for you?You can find plenty rotateme from a lot of users.I can send you mine,if you want send me an e-mail and i`ll send to you the .sis file that i used and as i said,it works fine for me.
Peace
Message Edited by noslien on 06-Feb-2008 07:47 AM
Eykleidis

Field symbols not working in data transfer VOFM routine

Hi,
I have been trying to set a value using field symbols, however for some reasons its not working. I am using a field symbol in a data transfer routine and the value which I am trying to set is a standard field outside the VOFM routine code.
I am trying to set a field gla_subrc which is actually a changing parameter.
The actual paramter is gn_subrc of type sy-subrc and within the form the name is gla_subrc. I need to set this changing parameter gla_subrc using the data transfer routine.
Is there a specific rule that field symbols dont work for changing paramters within subroutine or is there a specific syntax.
The syntax I am using is
ASSIGN ('(SAPLV50S)gla_subrc') to <fs>.
I also used the local program name instead of main program but still that does not work. Tried using the actual parameter as well.
Can someone please help me in this.
Thanks & Regards,
Naresh.

I need to stop outbound delivery creation against STO using vl10b transaction. The only way to stop creation is using data transfer delivery VOFM routine.
If i give an error message MESSAGE E001, this will give a hard error which is not acceptable. To avoid this, i use a perform message statment with message id and certain parameters which can displayed in a log.
However to make sure this message is displayed in log, I am clearing a work area having specific data needed for delivery creation.
Because of this clear, my error message gets captured in log but along with this another fake message is displayed in log which caused by the clear message.
The user gets confused as he now sees 2 messages, 1 which is correct and other 1 which is fake and that confuses him.
Data transfer routine is not the best place to give messages in log but we have very few options. The only way the system can give 1 message is if i set gla_subrc to 1. This is a variable which will help the system understand that the delivery should not be created as there is something wrong because the value is 1. Hence it will stop the creation and instead display whatever message i had passed to the log.
I need to somehow set this variable to 1 based on lot of analysis that has been done in the past.
Please let me know if there is any way by which we can fix this.
Thanks & Regards,
Naresh.

Component data transfer within flash

Similar Messages

Maybe you are looking for