Compression request deletion in cube bi7

please guide me how to delete
Thanks

Read abt Selective deletion.
Re: what is the use of request reverse posting in rsmo?
Re: Selective deletion after compression
Re: Info Cube Compression
Re: how can we delete the request after compression? is it possible ?if so how?
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5c7b3cbd556915e10000000a114084/frameset.htm

Similar Messages

Request Deletion from Cube stuck in execeptional state

Hi All,
We are stuck with a strange situation caused by below steps.
1. We loaded a full request in cube
2. Next day we scheduled deletion of the request from cube
3. While deletion was in progress, we deletd the DTP through which the request was loaded
4. DTP was deleted. Now this request stuck with status 9 (deletion started) in RSBKREQUEST table.
5. If we check the request ID it shows deleted but we can see the request still in cube
6. Compression of newer requests is not happening as they are referrins issue with this stuck request
Now I am looking for below help
1. How can we delete the request from cube now
2. Is there any way to create the DTP with old technical name
3. Can we compress the request with this request in cube
Regards
Jitendra

Hi Jitendra,
1. How can we delete the request from cube now
As suggested by raman change it to red and then try deleting.Check the backend tables also system is saying its deleted then tables should not have entries for this request.
2. Is there any way to create the DTP with old technical name
I think DTP technical name is decided by system so we can not not create tech names for DTP.
3. Can we compress the request with this request in cube
Current status of you request is not green so we can not compare it.so delete it first.
Regards,
Ganesh Bothe

Request Deletion in Cube

Hello Experts
I deleted a request in the cube (Manage) as there was error in loading data,I changed the status to red and deleted it and started a new one.The new request sucessfully loaded the data but the issue is the deleted request is still there with a 'Bin' picture in the request list and the sucessfully loaded request is not avaliable for reporting.
Thanks

Hi Krishna,
The deletion would be running in background. check in SM37, if there is active job running there for this cube. check the job log for more information.
even you can check in sm12 on your logon. if threre are any lock entries, then be patient till it get cleared. the process might be runnig. you will be getting the reporting symbol once it is deleted.
Hope it clears your doubt.
Points if helpful.
with regards,
sreekanth.

How to delete the rollup and compress request from the cube

Hi Experts,
I have a requirement, one request was updated into the cube and it was been rollup and then compressed. As the request was compressed so based on request id we cant perform the deletion.
So it is possible with selective deletion. Now before performing the selective deletion do i need to deactivate the aggregates.
Help me out on this.
Regards
Prasad

Hi.........
U hav to deactivate the aggregates................bcoz.........Selective deletion is only possible with uncompressed requests...............ie from F fact table...........after compression data moves from F fact table to E fact table.............. you can't do selective deletion on E fact table.........So first deactivate the aggregates............then do the selective deletion..............then again activate the aggregates..............and do the aggregate filling job manually in RSA1..............but I will suggest u delete the request...............bcoz any how u hav to deactivate the aggregates............and in case of selective deletion u hav to be very particular................if ur load is not taking much time............then delete the request and repeat the load............
Regards,
Debjani...........

Deletion of compressed request in cube

Hi All,
Is there any way i can delete a compressed request in a cube
and please keep mind that I also have other request in the cube there should not be deleted at any case as the source system of these requests is not connected to BW system now.
Regards,
Antony

Hi,
no, you can't delete a compressed request.
What you can do is to post the request reversal (all keyfigs x -1) provided you still have the data in the PSA or you can reextract it
or you can selectively delete the data of this request if you can find a selection criteria of the data to be deleted....
can you give more details on this request? was it a delta? coming from which DSource?
hope this helps...
Olivier.

Deletion of compressed request in BI 7.0

Hi,
I have loaded info cube by using process chain, in process chain I added compressed.
How to delete the compressed request from info cube .
Note : System is BI 7.0.
Thank you for advance.
Regards.
Suman.

Hi Suman,
Greetings.
Yes you can perform selective deletion of data from the compressed request in the Cube.
Either you can go to Manage option in the Cube and schedue there or use TCode delete_facts and delete from there.
If in case you want to schedule this deletion in a process chain, you will need to generate the program using delete_facts in dev and copy it to a Z program in Dev and add that in a process chain. Now migrate the program and the process chain.
Schedule it howvere you want it to be.
Let me know if it helps.
Thanks
Sachin

Delete Compressed requests

Dear All,
I am trying to delete the compressed request from the cube ;but it seems that deletion has not occured.
Please sugeest for the same.
Regards
Nidhi Walia

Hi Nidhi,
You cannot delete by the request ID if it is compressed. The other option would be to attempt Selective deletion by cube contents, if you can accurately highlight or pinpoint the data loaded by way of this request. Selective deletion is irreversible.
Once the requests are compressed the request number is set to 0.
Regards
KP

Compression status of all cubes at a time

Hi Experts ,
How can I check the compression status of each cube without going into mange screen
Regards,
Puru

Hi Sven,
May be this is help full answer from Srini
Open 2 screeens RSMDATASTATE get the SID from this table where field = COMPR which is last compressed request in the cube
and nother table RSICCOMP - enter cube name and SID(SID from RSMDATASTATE ) and choose greater than - click on number of entries.. will show number of requests which are not yet compressed
Hi Srini Thank you very muh for urs help
Regards,
Puru

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

BW: Error during Delete Overalpping requests from a cube

Hello, I am getting the following error in a process chain for the last few days when trying to do Delete Overlapping requests from a cube. If I do a "repeat" the chain completes successfully.
The error I am getting is:
Error when deleting requests for comparison request REQU_4MNC5NXH00MJI1LRHAFV3I3BH
Deletion of request REQU_4MQ0NT0ISDRZA444OQRDBGC3X from data target ZZCCA_C11 failed
Any suggestions on how to fix this problem?
Thanks.

Hi Sam,
The job might be failing because the request might me compressed. Take the request id from the error message(for instance
REQU_4MQ0NT0ISDRZA444OQRDBGC3X here) and check whether this request is compressed in the target ZZCCA_C11 or not.
If it is compressed then the data target deletion step will fail obviously.
If this is the case then change the setting of the compression step in the PC to compress the requests loaded 15 days back or whichever you feel comfortable.
If this is not the case then please check the job log once why the deletion is failing.
Hope this helps.
Regards,
Vijay.

Deleting a request from a cube

Hi Experts
I deleted few(old) requests from a cube in quality server. They got deleted, after some time i checked back. Those request are appeared in the request tab with a tick mark under compression status in InfoCube. I am confused !!!
Can any you clear my doubt...
Thanks
Pavan

Hi RMK,
is it the same ID-Pavan used by you above??anyways...
I guess we are dealing here with two scenarios..
1)If it was Infocube than the solution above i suggested holds true
2)Ifs its ODS ,the physical requests are still there because you deleted the CHANGE LOG data for those requests...so now there is no WAY you can delete those request PHYSICALLY !!!
Please check to verify/confirm the same..
the only way to get rid of those contents is through the SELECTIVE DELETE for those request ..
However;even after selective delete those request would appear physically in the manage TAB of the ODS ..but if you go to the ACTIVE table content for that ODS ,the data wont be there ,its deleted.so you can reconcile the reports now.
Hope it Helps
Chetan
@CP..

Deleting request options in Cube?

Hi,
The Cube is Not Compressed where Aggregate Rollup and Compression of Aggregate rollup are available.
Now, I need to delete only one request from the Cube.
I have found two options
1) Delete this request directly from Cube (Via Manage option of RSA1)
2) Delete this request from Selective Delete option.
I need to know which is the best option in order to avoid further maintanace of already available Aggregate Rollup and its Compression. For which option Aggregate Maintanace is needed ?
Thanks
Tony
Edited by: BI Dev on Oct 24, 2008 12:35 PM

Hi......
You are saying that roll up and compression is not done........then you can easily make the QM status red........and delete the request.......
In any case if roll up is done...then at first you have to deactivate the aggregate........as already said ..........then you can only delete the request..................and if compression is done.............not possible to delete any more..........because after compression request number dos'nt exist any more....
Besides deleting entire requests, you also have the option of deleting data according to business-orientated aspects from the fact table. For example, you can delete the data for a cost center or of a customer even if these are spread over several requests.
Remember that if you delete data selectively from an InfoCube, the aggregate belonging to this InfoCube is automatically deleted...........
For you the best option is to delete the request from the target......
Hope this helps.......
Regards,
Debjani......

How to delete a compressed request?

I have a full update request in my material movements cube that I want to delete and then attempt to reload from the PSA. When I go into the cube, highlight the reqeust, and click DELETE I get the message "Request ID 0000055001 is aggregated, compressed or scheduled"
How can I delete it?
Thanks!

Hi Patrick,
You cannot delete by the request ID if it is compressed. The other option would be to attempt Selective deletion by cube contents, if you can accurately highlight or pinpoint the data loaded by way of this request. Selective deletion is irreversible.
Hope this helps...

Deletion of compressed requests

Hi,
can anybody tell me is there any way to delete compressed requess in cube.

Hi,
You can not delete a compressed request.
When you compress a request it moves from the F fact table to E fact table. Here in the E fact table you do not have the request-id column, hence the data can not be recognized with the request number when it is compressed(when the data is in E fact table).
One thing you can do is delete the data based upon selections >> Selective deletion can be performend in such cases if you have any particular parameters ex: date, doc no. range etc etc. to do so.
Regards,

Compression request deletion in cube bi7

Similar Messages

Maybe you are looking for