How to delete a compressed request?

I have a full update request in my material movements cube that I want to delete and then attempt to reload from the PSA. When I go into the cube, highlight the reqeust, and click DELETE I get the message "Request ID 0000055001 is aggregated, compressed or scheduled"
How can I delete it?
Thanks!

Hi Patrick,
You cannot delete by the request ID if it is compressed. The other option would be to attempt Selective deletion by cube contents, if you can accurately highlight or pinpoint the data loaded by way of this request. Selective deletion is irreversible.
Hope this helps...

Similar Messages

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

Deletion of compressed request in BI 7.0

Hi,
I have loaded info cube by using process chain, in process chain I added compressed.
How to delete the compressed request from info cube .
Note : System is BI 7.0.
Thank you for advance.
Regards.
Suman.

Hi Suman,
Greetings.
Yes you can perform selective deletion of data from the compressed request in the Cube.
Either you can go to Manage option in the Cube and schedue there or use TCode delete_facts and delete from there.
If in case you want to schedule this deletion in a process chain, you will need to generate the program using delete_facts in dev and copy it to a Z program in Dev and add that in a process chain. Now migrate the program and the process chain.
Schedule it howvere you want it to be.
Let me know if it helps.
Thanks
Sachin

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete multiple yellow request in PSA

I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

Hi,
Debjani thanks for your reply,
It helped me
I have first deleted the contents from PSA table and
then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
then i have got another table RSREQDONE whcih contains that request so I have deleted request from that table.
Final solution is
Go to SE14 >> Give the PSA Table name >> delete it
Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

Deletion of compressed request in cube

Hi All,
Is there any way i can delete a compressed request in a cube
and please keep mind that I also have other request in the cube there should not be deleted at any case as the source system of these requests is not connected to BW system now.
Regards,
Antony

Hi,
no, you can't delete a compressed request.
What you can do is to post the request reversal (all keyfigs x -1) provided you still have the data in the PSA or you can reextract it
or you can selectively delete the data of this request if you can find a selection criteria of the data to be deleted....
can you give more details on this request? was it a delta? coming from which DSource?
hope this helps...
Olivier.

Deletion of compressed requests

Hi,
can anybody tell me is there any way to delete compressed requess in cube.

Hi,
You can not delete a compressed request.
When you compress a request it moves from the F fact table to E fact table. Here in the E fact table you do not have the request-id column, hence the data can not be recognized with the request number when it is compressed(when the data is in E fact table).
One thing you can do is delete the data based upon selections >> Selective deletion can be performend in such cases if you have any particular parameters ex: date, doc no. range etc etc. to do so.
Regards,

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the spool request number

HI Masters,
            My program creates a spool request. And i want to delete that spool request number? How to delete that??
              Thanks in advance.

hi
good
The program are RSPO0041 or RSPO1041.
This is handy whenever you encounter a user who managed to create a lot of spool requests which are choking your system.
Deleting them with SP01 will be too slow and you will get time out if it exceed the online time limit specify by your basis people.
<b><REMOVED BY MODERATOR></b>
thanks
mrutyun^
Message was edited by:
        Alvaro Tejada Galindo

How to delete cube old request by using abap code?

Dear experts,
Here is one thing need your help:
We have one cube need to delete the old request. This cube is loaded daily and only need to delete the request of that month.
I know there is one "Delete Overlap Requet" type in the process chain, but my concern is: in our DTP filter, different day the selection will have different values, let's say A and B, and A and B are not even overlap at all.
So my question is:
1. Can I still use "Delete Overlap Request" to delete the old request?
2. If so, I see it can be implemented by abap routine, can anyone give me some sample code? Like how to delete request only in this month. And how to delete request whose selection is equal to a specific value.
Note: one of the source cube is real time cube so can not delete the request from infopackage.
Any post will be appreciated and thank you all for your time in advance!
Regards.
Tim

Here is the intial code when I choose "Request Selection through Routine", please help me on how to choose the specific request and delete them in this routine.
program conversion_routine.
Type pools used by conversion program
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoCube        = ZPC_DEL_REQ_ZBPS_C01
form compute_ZPC_DEL_REQ_ZBPS_C01
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube ZPC_DEL_REQ_ZBPS_C01.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line        -
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line         -
endform.

How to delete a compressed request?

Similar Messages

Maybe you are looking for