Computer Boot Policy Processing Time

Hi
I am troubleshooting the slow boot up process in our Windows 7 64bit enterprise environment. This is essentially the time from power on to reach Ctl, Alt, Del (Log-in screen)
I am trying to eliminate Group Policy and have been doing some investigation using the Group Policy Operational Logs on a couple of Windows 7 Client PCs. I use the Activity ID to track all the Computer Boot Policy processes from start to completion.
My problem is, that the Computer Boot policy will report it has completed in say 300 seconds, but when I examine all the content of this specific process (Computer Boot Policy Processing) it will only list events which add up to a small fraction of the 300
seconds.
So I am basically unsure where the other time is being taken up, as it is not recorded in the list of events under the Computer Boot Policy Processing.
Hope someone can assist

Hi,
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/windows/en-US/3596b55e-e21d-4185-95a3-8c4503987910/windows-7-64bit-startup-time-is-slow-and-i-want-to-know-why?forum=w7itproperf
Regards,
Gopi
JiJi
Technologies

Similar Messages

  • Every time I boot up I receive the message that "iCal cannot log in to your iCloud account because you password is incorrect-" I do enter it correctly but the same error message comes up the next time the computer boots up.  How do I correct this issue?

    How do I correct the problem that every timeI boot up I receive the message that “iCal cannot log in to your iCloud accountbecause you password is incorrect…” I do enter it correctly but the same errormessage comes up the next time the computer boots up?  Thanks.

    Hello jwpg,
    Thank you for the details of the issue you are experiencing after restoring an iCloud backup.  I recommend the following articles for an issue like this:
    iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
    http://support.apple.com/kb/TS5207
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?

    What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
    Can someone point me to a document that states the official policy stating their maximum review time?  This info used to be in the WLK1.6 FAQ but I don't see it for the HCK2.1 suite.
    Thanks!
    Al

    Ian,
    Thanks for your reply. Yes, I'm sure LabVIEW uses the (default) Windows timer. And yes, 1 mS is not guaranteed due to the preemptive nature of Windows (and even "RTOSs" to varying degrees), which is why I see about plus or minus 2 mS. 
    Apparently the Windows timer can be set by API calls. See: http://www.lucashale.com/timer-resolution/. Here's a screen shot of his TimerResolution.exe on a Windows 7 PC:
    Here it is on my Windows XP PC after I set it to "Maximum" (initially it was 15.625 mS):
    Notice that it sets the Maximum to less than 1 mS, which is supposed to be the max, so there are some bugs. Plus the Default button does not reset it in XP, but does work on Windows 7 or 8. (I know this is not the place to "debug" non-LabVIEW applications!)
    I'll bet LabVIEW sets it, too. The only caveat, as I said, is it looks like another application can change it, since the hardware timer is a "global" timer. I have not seen this issue in my LabVIEW applications, have you?
    I guess I need to do some more digging to see the code to set the timer, but it looks like the developers of LabVIEW have it figured it out.
    (FYI, I did notice that running my LabVIEW app (which gives about 2 mS resolution) or a C# app, which gives 15.625 mS resolution, does not affect what TimerResolution.exe reports, so I'm not sure if it's really working correctly. If I figure it out I'll post the results.)
    Ed

  • When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?

    When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Long computer processing time to create letterboxing

    I imported both widescreen and 4:3 clips into an imovie 6 project. The computer took a long time to process the widescreen clip(several minutes). Will I have to endure this for all widesreen clip downloads in the future? If this is the case I think I will stick to 4:3.

    Yes.
    And you get better quality and more options by converting 4:3<->16:9 with MPEG Streamclip anyway:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#43-169

  • Why is my image processing time additive when I have it spread to seperate timed structures on a quad-core realtime desktop computer?

    I am developing a vision application on a quad-core realtime desktop computer and 2 NI-1430 boards.  There are 3 cameras.  Each has its own timed structure loop with its own cpu core.  We generated the image processing vi's with Vision Assistant.  I expected the image processing for each camera to happen in parallel, but the total elapsed time is the same as if the image processing was serial.
    Are the Vision Assistant generated vi's not designed for this?  Do I have to set some properties to facilitate multi-core processing? For example, do the shared lower-level vi's have to declared re-entrant?

    Hey arnieb,
    It would be interesting to see your code in 'parallel mode' as opposed to 'serial mode.' In 'serial mode' are you processing the image from one camera and then the other? So, do you actually wire error wires (or other form of execution order control) connecting the processing code from one camera to the processing code of another? How does the processing time of your code compare to processing images from a single camera?
    Hope this helps.
    -Ben
    WaterlooLabs

  • I would like a program to run every time the computer boots. How would I set this up?

    I would like a program to run everyime the computer boots but am not sure where to go to set that up.

    Either of two places.
    If the program's icon is in the Dock, right-click or Control-click on that icon, then from the Options item select Open at Login.
    Otherwise, go to System Preferences > Accounts (in Snow Leopard) or Users & Groups (in Lion). Select the account in the left pane, then click Login Items in the selector bar near the top of the screen. Use the "+" button to add the item you want.

  • Adding complex computed column at run-time fails in PB 12.6

    I support a large 'vintage' application that was originally written in the late 90's, and has been migrated from version to version over the years.  Currently I'm working to get it working in PB 12.6 Classic, build 3506, migrating it from PB 11.5
    The first issue I've come across is that PFC treeviews are not working properly.  After some debugging, I determined that the cause of the failure is the PFC code's creation of 'key' column in the datawindows being used to populate each level.
    In the pfc_u_tv.of_createkey function, it looks at the linkages between the levels of a treeviews data, and then crafts an expression, and then uses that to create a computed column, which is subsequently used to uniquely identify the data.
    The expression is a series of string concatenations, such as this:
    expression='String(ctg_cd) + "#$%" + String(app_cd) + "#$%" + String(app_cd) + "#$%" + String(win_id) + "#$%" + String(ctg_cd) + "#$%"'
    This expression is then used in a modify statement to create the new compute key column:
    ls_rc = ads_obj.Modify("create compute(band=detail x='0' y='0' " + &
      "height='0' width='0' name=pfc_tvi_key " + ls_Exp + ")")
    In earlier versions, this works, and when you do a getitemstring afterward you get a long concatenated value that PFC uses to uniquely identify treeview items.
    Such as 'a/r#$%plcy#$%plcy#$%w_m_plcy_fncl_tran#$%a/r#$%'
    However, in PB 12.6, only the first portion of the expression is processed.  There is no error returned from the Modify function, and the column is created, but the expression is only evaluating one part of the expression.  In this partiular case, it results in
    'plcy'
    I just noticed that this isn't the *first* item in the set of concatenated columns and string literals, which is interesting.  In any case, when the computed key values are not correct, the whole method PFC is using to populate and run the treeview falls apart, and you get all children under each parent, and selections on the treeview object do not work properly because the key column values are not unique.
    I can copy the expression value from a debugging session, and use that to create a computed column at design time, pasting the expression in, and naming it the same as the created column (pfv_tvi_key), and this then allows the treeview to work properly.  However, this is a very cumbersome and problematic workaround.  The application has a lot of treeviews, with a very large number of datawindows operating as all the different types of items on different levels of different trees.  I don't think it's a practical workaround, and future maintenance would be very difficult.
    bu the workaround still demonstrates it is not an issue with the syntax of the compute expression, just an issue with the way it is handled by PowerBuilder when a column is created at run time,vs. at design time.
    Has anyone else encountered this issue?  I would think there are a fair number of older apps still around that are using PFC treeviews.
    My next step will be to install PB 12.6 build 4011 and cross my fingers.  Other than that, perhaps try 12.5?

    Updating the PFC layers has started to lead down a rabbit hole of hundreds and hundreds of errors.
    Granted, many of these are probably rooted in a few ancestor issues.
    But I'm not sure this will lead to a solution.
    The problem lies in using a modify statement to create a computed column at run time containing an expression with multiple concatenated values.
    If I look at the pfc_u_tv.of_createkey function from the newer PFC version, I see the same code there:
    ls_rc = ads_obj.Modify("create compute(band=detail x='0' y='0' " + &
      "height='0' width='0' name=pfc_tvi_key " + ls_Exp + ")")
    And the same code above it which creates the expression used in the modify.
    So after doing all the patching for the new PFC version, I somehow suspect I'll still be facing the same datastore.modify problem.
    Not to say that isn't a good thing to do, just not sure it addresses the root of the problem.

  • How to reduce process time in report

    Hi all..
    Is there any technique to reduce process time in report on programmer side??
    Plz help me...

    Hi
    check this and ensure that your code is as per the stds
    1) Dont use nested select statements
    2) If possible use for all entries in addition
    3) In the where addition make sure you give all the primary key
    4) Use Index for the selection criteria.
    5) You can also use inner joins
    6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
    7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
    ABAP performance depends upon various factors and in devicded in three parts:
    1. Database
    2. ABAP
    3. System
    Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
    u can get an interactive grap in SE30 regarding this with a file.
    also if u find runtime of parts of codes then use :
    Switch on RTA Dynamically within ABAP Code
    *To turn runtim analysis on within ABAP code insert the following code
    SET RUN TIME ANALYZER ON.
    *To turn runtim analysis off within ABAP code insert the following code
    SET RUN TIME ANALYZER OFF.
    Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    Avoid for all entries in JOINS
    Try to avoid joins and use FOR ALL ENTRIES.
    Try to restrict the joins to 1 level only ie only for tables
    Avoid using Select *.
    Avoid having multiple Selects from the same table in the same object.
    Try to minimize the number of variables to save memory.
    The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    Avoid creation of index as far as possible
    Avoid operators like <>, > , < & like % in where clause conditions
    Avoid select/select single statements in loops.
    Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
    Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
    Avoid using ORDER BY in selects
    Avoid Nested Selects
    Avoid Nested Loops of Internal Tables
    Try to use FIELD SYMBOLS.
    Try to avoid into Corresponding Fields of
    Avoid using Select Distinct, Use DELETE ADJACENT
    Check the following Links
    Re: performance tuning
    Re: Performance tuning of program
    http://www.sapgenie.com/abap/performance.htm
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    check the below link
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    See the following link if it's any help:
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    Check also http://service.sap.com/performance
    and
    books like
    http://www.sap-press.com/product.cfm?account=&product=H951
    http://www.sap-press.com/product.cfm?account=&product=H973
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    Performance tuning for Data Selection Statement
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    Debugger
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    Run Time Analyser
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
    SQL trace
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
    CATT - Computer Aided Testing Too
    http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
    Test Workbench
    http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
    Coverage Analyser
    http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
    Runtime Monitor
    http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
    Memory Inspector
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
    ECATT - Extended Computer Aided testing tool.
    http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
    Just refer to these links...
    performance
    Performance
    Performance Guide
    performance issues...
    Performance Tuning
    Performance issues
    performance tuning
    performance tuning
    You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
    1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    2 Avoid for all entries in JOINS
    3 Try to avoid joins and use FOR ALL ENTRIES.
    4 Try to restrict the joins to 1 level only ie only for 2 tables
    5 Avoid using Select *.
    6 Avoid having multiple Selects from the same table in the same object.
    7 Try to minimize the number of variables to save memory.
    8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    9 Avoid creation of index as far as possible
    10 Avoid operators like <>, > , < & like % in where clause conditions
    11 Avoid select/select single statements in loops.
    12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
    13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
    14 Avoid using ORDER BY in selects
    15 Avoid Nested Selects
    16 Avoid Nested Loops of Internal Tables
    17 Try to use FIELD SYMBOLS.
    18 Try to avoid into Corresponding Fields of
    19 Avoid using Select Distinct, Use DELETE ADJACENT.
    Regards
    Anji

  • Problem description: Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom-.

    Problem description:
    Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom….     Help is much appreciated!
    EtreCheck version: 2.0.11 (98)
    Report generated 3. november 2014 kl. 01.23.41 CET
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2:49:19
    Disk Information: ℹ️
      Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (260.35 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Configuration files: ℹ️
      /etc/sysctl.conf - Exists
      /etc/hosts - Count: 15
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/IPVanish.app
      [not loaded] foo.tap (1.0) Support
      [not loaded] foo.tun (1.0) Support
      /Applications/LaCie Desktop Manager.app
      [not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
      [not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
      [not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
      [not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
      /Applications/Private Eye.app
      [loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
      /Library/Application Support/HASP/kexts
      [not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
      /System/Library/Extensions
      [loaded] com.hzsystems.terminus.driver (4) Support
      [not loaded] com.nvidia.CUDA (1.1.0) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
      [not loaded] com.sony.protocol.prodisc (2.3.0) Support
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ℹ️
      CUDA: Path: /System/Library/StartupItems/CUDA
      ProTec6b: Path: /Library/StartupItems/ProTec6b
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.adobe.AdobeCreativeCloud.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [running] com.digitalrebellion.EditmoteListener.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.intego.backupassistant.agent.plist Support
      [running] com.mcafee.menulet.plist Support
      [invalid?] com.mcafee.reporter.plist Support
      [loaded] com.nvidia.CUDASoftwareUpdate.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.orbicule.WitnessUserAgent.plist Support
      [loaded] com.xrite.device.softwareupdate.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [running] com.aladdin.aksusbd.plist Support
      [failed] com.aladdin.hasplmd.plist Support
      [running] com.edb.launchd.postgresql-8.4.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.intego.BackupAssistant.daemon.plist Support
      [loaded] com.ipvanish.helper.openvpn.plist Support
      [loaded] com.ipvanish.helper.pppd.plist Support
      [invalid?] com.mcafee.ssm.ScanFactory.plist Support
      [invalid?] com.mcafee.ssm.ScanManager.plist Support
      [running] com.mcafee.virusscan.fmpd.plist Support
      [loaded] com.mvnordic.mvlicensehelper.offline.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.orbicule.witnessd.plist Support
      [loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
      [running] com.xrite.device.xrdd.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Skype Program (/Applications/Skype.app)
      GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
      PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
      EarthDesk Core UNKNOWN (missing value)
      Dropbox Program (/Applications/Dropbox.app)
      AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
    Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SiteAdvisor: Version: 2.0 - SDK 10.1 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.2 Support
      F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
      f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
    Safari Extensions: ℹ️
      Facebook Cleaner
      Better Facebook
      SiteAdvisor
      Incognito
      Bing Highlights
      YouTube5
      AdBlock
      YoutubeWide
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
      CUDA Preferences  Support
      EarthDesk  Support
      Editmote  Support
      Flash Player  Support
      FUSE for OS X (OSXFUSE)  Support
      Growl  Support
      Java  Support
      Witness  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          13% taskgated
          12% WindowServer
          1% WitnessUserAgent
          1% sysmond
          1% Activity Monitor
    Top Processes by Memory: ℹ️
      327 MB com.apple.WebKit.WebContent
      137 MB softwareupdated
      94 MB Safari
      82 MB VShieldScanner
      82 MB Dock
    Virtual Memory Information: ℹ️
      65 MB Free RAM
      1.58 GB Active RAM
      1.54 GB Inactive RAM
      647 MB Wired RAM
      2.95 GB Page-ins
      260 MB Page-outs

    You have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.

  • Processing time

    Hi guys,
    my question is this: I should to use the Processing time(WRPL-BZTEK) defined in customizing (SPRO>Materials Management>Purchasing>Purchase Requisition>Processing Time) in according to material type and not to side/division as such is now.
    My purpose is to enlarge the processing time purchasing (or the planned delivery time) to modify the delivery date scheduled by MRP.
    Is there a user-exit\Badi to implement this?Is necessary to modify the standard and if this is the one way how and where can I act?
    Thanks in advance to all,bye
    Maximilian

    Hello, Riva
    Processing Time: (configuration setup)
    Here, you define the plant-specific purchasing department processing time.
    And the processing time is the time required by the buyer to convert a requisition into a purchase order. And the processing time is taken into account during the scheduling process for externally procured materials within the framework of materials planning and control.                                                  
    Actions                                                                
    Suggestion:   
    Maintain the purchasing department processing time for each plant.
    Processing time required by purchasing department.
    -> Time that the purchasing department requires to convert a purchase requisition into a purchase order.                                      
    The usage of this configuration setup is
    -> The purchasing department processing time is included in the computation of the delivery date.
    Table Name: WRPL (i.e, for Replenishment: quantities per customer/material)
    Field Name: SRP_BZTEK (i.e, for Processing time required by purchasing department)
    Data element: BZTEK (i.e, data element for processing time for purchase department)                                                                         
    If you want to change the length of the field BZTEK (allowable characters is 2), you can do it, by modifying the TWO TABLES (i.e, T399D (Control parameters for MRP &
    WRPL (Replenishment: quantities per customer/material)) using the Acess key (from SAP)
    Importent Note: Before you modify it, you need to check with the PP &MM (since this requirement belongs to both modules)
    Suggestion: As per my knowledge this (processing time for PR) configuration setup is for the plant (or plants).
    Hope this will clarifies you,
    Reward, if it helps,
    Regards,
    Srin.K

  • Boot Camp Killed Time Machine?

    I'm going to try to offer the short version of this story...
    Using Boot Camp I created a Windows partitiion and, using the Boot Camp instructions available from within the Boot Camp assistant, got XP Home installing. About halfway through the install (after it's asked you to configure your time zone and network settings etc.) it locked up. Having no other option, I powered it off. When I turned it back on it went into XP Home however I couldn't do the next step of installing the software off the OSX CD because for some reason it wouldn't read it.
    I started the Windows installation again, this time it gave me a BSOD. So, I rebooted, held down the option key, went into OSX, ran Boot Camp and killed the windows partition. I remembered that I had difficulty with this copy of XP Home before and went after my XP Pro CD.
    I started the Boot Camp process over again, creating the partition, however this time when the installation got to the section of picking the partition, the Boot Camp partition wasn't there. So I had no choice but to cancel.
    Giving up and not wanting to mess with this anymore, I rebooted into OSX and once again deleted the partition. This time I noticed my Time Machine drive was no longer showing up on the desktop and the backups said they were delayed because there was no drive. So I reboot and I'm brought to a black screen saying there's no bootable media. I reboot, hold down option and boot into OSX. Still no Time Machine drive. I reboot again and once again see the "no bootable media" error. I'm stuck in a loop AND my Time Machine drive simply isn't mounting.
    Being that I deleted the windows partion and OSX is the only thing that comes up on an option-key reboot - I don't quite get why it's looking for the Windows install disk. I also don't get where my external hard drive has gone. I should mention I have unplugged it and tried to force it to remount with no luck.
    I want to run Time Machine and get things back to normal... but I can't because what has caused the mess to begin with has also killed Time Machine. Help??

    Ok so I got my external drive to be recognized again by plugging it in via firewire but still no joy on the Boot Camp. I guess I'll just try again and see what happens.

  • I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer

    I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?

    You do not state which version... if CS2 read next
    CS2 (and earlier) Activation Server replacement software
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
    If not CS2, read next
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I downloaded carbon copy. transferred entire internal hd  to new replacement HD  thru USB.  computer booted from replacement hrdrive. then installed replacement hard rive into iMac. when rebooting imac did not recognized new replacement hd.

      i downloaded carbon copy. transferred entire internal hd  to new replacement HD  thru USB adapter kit.  computer booted from replacement hrdrive. then i erased the internal hardrive and reloaded the operating system.( i needed to find out if the hard drive was bad or virus/worm was the cause). then installed replacement hard drive into iMac. when rebooting, imac did not recognized new replacement hd. i also upgraded memory at the same time.  ok what did i do wrong. do i have to remove the new replacement hardrive to extract the data.

    It should not matter. CCC will "clone" the recovery partition as well, but not knowing exactly what operation you had CCC perform it is difficult to know what may have gone wrong - it has many customizable options and you have to choose the correct one.
    I have performed the same transplant as you described and didn't have a problem, but if your Mac is not recognizing the internal HD you really have no choice other than to reinitialize it as suggested. After that, install OS X, upgrade to Mountain Lion if required, and migrate your old account(s) from your backup.
    my backups have backups.
    I assume you didn't mean that literally. Have redundant backups - don't "back up your backups".

  • I plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

    i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

    Try restoring from the backup created at the beginning of the sync process:
    Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
    Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
    Select Restore from backup, choosing your most recent backup to restore from
    Disconnect your phone and confirm that your photos are back
    Go back to iTunes>Preferences>Devices and re-enable automatic syncing.

Maybe you are looking for