What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
Can someone point me to a document that states the official policy stating their maximum review time? This info used to be in the WLK1.6 FAQ but I don't see it for the HCK2.1 suite.
Thanks!
Al
Ian,
Thanks for your reply. Yes, I'm sure LabVIEW uses the (default) Windows timer. And yes, 1 mS is not guaranteed due to the preemptive nature of Windows (and even "RTOSs" to varying degrees), which is why I see about plus or minus 2 mS.
Apparently the Windows timer can be set by API calls. See: http://www.lucashale.com/timer-resolution/. Here's a screen shot of his TimerResolution.exe on a Windows 7 PC:
Here it is on my Windows XP PC after I set it to "Maximum" (initially it was 15.625 mS):
Notice that it sets the Maximum to less than 1 mS, which is supposed to be the max, so there are some bugs. Plus the Default button does not reset it in XP, but does work on Windows 7 or 8. (I know this is not the place to "debug" non-LabVIEW applications!)
I'll bet LabVIEW sets it, too. The only caveat, as I said, is it looks like another application can change it, since the hardware timer is a "global" timer. I have not seen this issue in my LabVIEW applications, have you?
I guess I need to do some more digging to see the code to set the timer, but it looks like the developers of LabVIEW have it figured it out.
(FYI, I did notice that running my LabVIEW app (which gives about 2 mS resolution) or a C# app, which gives 15.625 mS resolution, does not affect what TimerResolution.exe reports, so I'm not sure if it's really working correctly. If I figure it out I'll post the results.)
Ed
Similar Messages
-
Why the processing time for loading is taking longtime
Hi All,
why the processing time for loading is taking longtime i want to know the soltion.
Thanks,
chanduTo analyze the process chain and fix it, go through the below document:
[SAP BW Data Load Performance Analysis and Tuning|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b]
Hope it helps,
Naveen -
How to calculate the Processing time for material based on its route ?
Hello experts,
I would like to calculate the Scheduled in-house production time based on route.
Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
So I'm looking for a function or any tool to use it in report.
thanks,
Elihi,
from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results for your inhouse prod. time.
> Hello experts,
> I would like to calculate the Scheduled in-house
> production time based on route.
> Actually this is done in the prod. route in tcode
> CA02. (via menu Extras => scheduling => schedule).
> After getting the schedule table press the
> 'scheduling results' button I received the Processing
> time, Setup and teardown time,... Scheduled in-house
> production time.
> So I'm looking for a function or any tool to use it
> in report.
>
> thanks,
> Eli -
To Check the execution time for each transaction.
Abapers,
How to find out the process time for each transaction eg.order entry,shippng,billing, etc in SAP.
TIA,
sinthuHi,
By default you can see the execution time at right side corner of sap session.
You can use SE30 to get in to more details like database time , abap time etc...
Hope it helps...
Regards,
Vijay -
Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them.
Notice how in the photo, I can't identify which MS office document I would like to switch too. Perhaps since the Dashboard and Desktop windows are at the top of my screen now Apple doesn't let you have all the applications take up the full screen and be sized individually so that you can have a better idea on what to pick.
I like the idea of grouping to an extent... If you have a bunch of random things it was hard for me to decifer between what was safari, chrome, or word. But now that they grouped them like this, if you have multiple pages of one program running, you can't switch between those pages easily like before.If I wanted to open any of my Applework documents I had to open them one at a time and resave them with pages. This could take weeks.I have 1000s of apple work documents.
You don't have to open and re-save every AppleWorks document you have right now. Just wait till you need one, then do it. The documents aren't going anywhere.
Am I dealing with Microsoft? This was a BIG surprise to me that Apple would release an OS without testing all programs.
Frankly, it is not Apple's responsibility to ensure compatibiltiy with every piece of software available for OS X. That is the responsibility of the software vendor. Lion has been available to developers for several months before it's release, so Microtek had plenty of time to update their software. Yet they did not. How is that Apple's fault? I think Apple was very generous to give you a refund for Lion.
I'm not trying to belittle your frustration but I do think your ire is misplaced. -
Help needed regarding the deployment architecture for PROD env
Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and RegardsHi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein -
What is the process code for message type FIXEDASSET_CREATE?
Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AMHi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish -
Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.
John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
Query regarding the data type for fetcing records from multiple ODS tables
hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh -
What is the process code for Message type FUNDMA
Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
WilliamCheck entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish -
Norway - any know what´s the delivery time for purchase new iPhone 4S?
On the web it says 1-2 weeks. Is that a reality?
Theo - while I do not live or work in your part of the country I can at least share my experience. I had a state of the art Droid Charge 4G LTE prior to getting the iPhone 4S. Keeping all things equal, when I used my Charge on 3G, which was almost the entire time I owned it, it was slower than what I am getting on my new iPhone. I was averaged .1 - ,5 down with my Charge and I am getting .5 - 1.2 down on my iPhone. I really don't know what difference location makes other than the sheer amount of people on the network, but the iPhone should outperform your old Droid.
I would recommend calling Apple Care or stopping by a genius bar at an Apple store. You could also check the download speeds of display phones at a store, then compare yours at the same time for a determination of a harware issue or data issue. I know this is some work, but it should narrow down a cause. -
What could be the Approximate time for HRMS Implementation?
Dear Friends,
Any clue on What could be the Approximate time for HRMS Implementation?
Modules: Core HR, Payroll, SSHR & OLM
Bahrain Legislation
2 Functional
1 Technical Resource
Integration with Third Party system for Financials..
Anyy approximate time pls..
GuruHi Guru,
Difficult to estimate these as each legislation is different.
I also presume, Bahrain is not a seeded legislation.
So you will have to write all the tax rules and reports.
But, as the Tax/NI rules for GCC are fairly simple, should not be difficult.
Best way to go about it, is to do it in phases.
Core HR - BG configuration, Person migration, Absences etc.. and finally any reports for HR
Payroll - elements, balances, formulas and all the logic.. and then all the reports.
Once HR and payroll are done.. SSHR and OLM should take 1/3(or 1/2) of the time you spent on the HR/Payroll.
Cheers,
Vignesh -
Hi All,
My client is asking the process flow for the following scenarios can any one help me by providing the procees flow
1.Depot Import Material Return Process
2. Depot FOC process.
3.Depot purchase return process.
4. High sea Sales Config (if anything in SAP).
Regards
sunilDear Murali,
Welcome to PS World.
See link which is given by Venkat Sir.(It shows process)
Its very tough to explain whole process.
Plz refer this link.
Deffntly it will help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
PS cycle
Re: Enterprise structure for PS
Re: Why we use Project system?
Regards
Chandra -
My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!
Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous
Maybe you are looking for
-
Permissions Changed After File Transfer
Yesterday, I received a new 21.5" iMac. I transferred my files and settings from an older MacBook PRO (Core 2 Duo). Now, most of my programs don't recognize me a the same (?) user, and say that there is a problem with my "permissions" (like when Ligh
-
My iPod 4tb gen's camera isn't working.Can someone help me?
My camera isn't workuiing and I've tried yo.Please help
-
IDVD crashes after completeing burn
Hi I am trying to burn multiple copies of a disk. I usually allow the rendering to happen overnight and when I come in the disk has ejected it works fine but the crash announcement comes on to tell me iDVD has crashed. Unfortunately the rendering pro
-
Itunes couldn't copy the file because it couldn't be converted
When I choose convert higher bit rate songs to 128 kbps in iTunes it only copies the songs it wants to. Is there going to be an update to address this?
-
What does, "swing is not thread safe." mean?
can anyone explain what that means in detail?