Why is my image processing time additive when I have it spread to seperate timed structures on a quad-core realtime desktop computer?

I am developing a vision application on a quad-core realtime desktop computer and 2 NI-1430 boards.  There are 3 cameras.  Each has its own timed structure loop with its own cpu core.  We generated the image processing vi's with Vision Assistant.  I expected the image processing for each camera to happen in parallel, but the total elapsed time is the same as if the image processing was serial.
Are the Vision Assistant generated vi's not designed for this?  Do I have to set some properties to facilitate multi-core processing? For example, do the shared lower-level vi's have to declared re-entrant?

Hey arnieb,
It would be interesting to see your code in 'parallel mode' as opposed to 'serial mode.' In 'serial mode' are you processing the image from one camera and then the other? So, do you actually wire error wires (or other form of execution order control) connecting the processing code from one camera to the processing code of another? How does the processing time of your code compare to processing images from a single camera?
Hope this helps.
-Ben
WaterlooLabs

Similar Messages

  • Why wont my image boarder light up when the image is hovered over, border is set to 2.

    why wont my image boarder light up when the image is hovered over, border is set to 2.

    Because you have not coded it correctly.  It is difficult for us to tell you where your mistake is without seeing your test page.

  • Why does my menu bar still display yesterdays time/date when i have been using it all morning?

    why does my menu bar still display yesterdays time/date when i have been using it all morning?

    Incorrect date or time displayed in various applications in Mac OS X

  • Why does my network connection time out when downloading iphone 4 software update?

    Why does my network connection time out when trying to download iphone4 software update?

    I'm having the same problem too. I cannot sync or update over wireless or wired connections ever since I installed the most recent iTunes update. iTunes goes through the complete OS 5.0.1 download only to tell me the connection has timed out just when it seems ready to install. I've since reinstalled iTunes, I've ejected and done hard restarts on both my problem devices. I've disabled anti-virus, anti-malware, and firewall. No change in outcome except that, after doing all this, my final attempt to simply sync my 1st Gen iPad led to iTunes crashing and being automatically closed by windows just before finishing the final step. Is this a cruel joke, because I'm certain I can hear iTunes laughing at me for wasting so much time on this.
    Windows 7, 64-bit
    iPhone 4 with iOS 5.0
    iPad 1 with iOS 5.0

  • Why can't I use my account when I have verify for few time

    Why can't I use my account when I have verify for few time

    I am not from Apple. Apple is not here. Apple does not answer questions here. There are only other users, such as yourself, here.
    NEVER give out your personal information here in this forum to anyone.
    If you cannot follow the simple instructions above, I am unable to offer any other assistance.
    Good bye.

  • HT1918 why is my credit card being charged when i have money from an itunes card

    why is my credit card being charged when i have money from an itunes card

    When its around the holiday season the purchasing system some times gets a lil thrown off and wont recognize the gift card on the account. But its easy to get fixed.
    Just contact iTunes uspport with this link and they will revert the charges to the gift card:
    http://www.apple.com/lae/support/itunes/contact.html

  • Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?

    Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?

    FormsCentral can be used from anywhere, but to purchase a subscription you need a credit card with the mailing address in one of the countries supported for purcahse:
    http://forums.adobe.com/docs/DOC-1375
    The partner can purchase if they have access to a card in one of those countries.  Alternatively they do not need to purchase a subscription to edit forms that you've created, they do in order to create multiple forms of their own, but by your sharing forms with them at the "Co-author" level they have access to the editing.  Here are the instructions to share a form:
    http://forums.adobe.com/docs/DOC-2462
    Thanks,
    Josh

  • Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

    Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

    Texting longer text messages or any media (pictures/video/sound etc) being sent requires data to be active. However, it does not count against your data caps.
    Since you have an iPhone, you must also be aware of the difference between iMessage and SMS Text messages. The iPhone, by default, will send an iMessage when sending another text message to anyone else with an iPhone, iTouch, or iPad. This does use your data if you are not connected to wifi. In Settings, you can turn iMessage off, and then all of your texts will go through Verizon.
    Also understand- iMessage will use wifi when connected to wifi, but would need cellular data connection to work when not connected to wifi. Regular SMS text messages that are long or any media will always use the cellular data and not wifi, so will not send if cellular data is turned off, even if on wifi. However, this does not count against your cap.

  • When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

    When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

    Hi NicoMan,
    According to your description ,we seem to suffer a performance issue here.
    Have you tried to open the task manager to check the system performance  ? Is there any specific process occupied many system resources ?Will the issue occur only with the specific applications ?
    We can try to restart the Windows Explorer process to have a check.
    If it only occurred with the spefcific two applications ,we can try to end the other application processes manually from the task manager to have a check .
    If this is caused by the specific application ,we may need to look for help from the third party support considering they are all the third party applications .
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Why does the YouTube app say playback error every time even when I have wi-fi

    When I try playing a video it keep saying playback error even when I have wi-fi on. This has happened a few days ago.

    I notice that the WiFi is "white", like all good KitKat icons, instead of White for connected with no internet, and blue for fully functioning.
    The 1x right next to it seems very dim.  If I turn off WiFi, the 1x gets bright white, and has the up/down arrows under it.
    If having the icon on my status bar all the time means that I actually will get data when I leave WiFi, then it's a winner.
    I "hotspot" a lot, and I used to have to make sure I had a data connection and launch the hotspot before I got on a phone call, because the only way to get it to connect was to power cycle the phone.
    -- Clarence

  • Why is my PDF printing off center when I have the landscape box checked?

    I am having some trouble with printing my pdf's. I have several PDF's that are oriented in landscape orientation. In the past, they printed normally in landscape mode or autoportrait/landscape mode. Now they print fine in autoportrait/landscape mode, but print off center when printed in landscape mode. The reason this is a problem, is I have given instructions to 100's of my buyers for printing in "landscape mode"....have heard from one buyer already today with this printing problem. I  was then able to reproduce the problem on my own printer.  Is this a recent Adobe update and if so will it be fixed any time soon? Or is there something I have unknowingly done to my printer setting and this buyer has done the same? Thank you in advance for your help.

    This is happening when I have the "actual size" box checked  (the scaling box is not checked). Also, the printable area is centered on the page in the original documents. I have printed all of these pdf's in the past with the landscape box checked and have never had this happen.

  • Why haven't my contacts come on when I have set up iCloud

    I want to no why when I have set up to iCloud my numbers haven't come onto my phone?

    Hi laurah23,
    If you are having issues with Contacts in iCloud, you may find the following article helpful:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    Regards,
    - Brenden

  • Why does my internet slow WAY down when I have camera wirelessly connected

    This is a great camera for my purpose, but for some reason it is slowing my internet download to crawling speed when I have it connected wirelessly. Btw don't know if having it done wired does any good.
    It used to work fine (without slowing down my internet) until I added a second wvc210 camera, so I removed the second camera and its still sloooow.  If I have it disabled (unplugged) then my internet is fine.
    Any suggestions?  Thanks for any advice.

    Hi johnkim575 and welcome to the Cisco Home Community!
    The WVC210 is now being handled by the Cisco Small Business Support Community.
    For discussions about this product, please go here.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • Why do my images appear washed out when I use Save for Web?

    Q: The color/brightness/tone of my image changes when I use
    Save for Web. Why?
    A: Photoshop is a color-managed application. The Web is not. Normally, when you view an image in
    Save for Web or
    ImageReady you are viewing it without color management and see it how it will appear when uploaded to the Web.
    To minimize changes, Convert your image to sRGB (i.e from
    Edit menu choose
    Convert to Profile )before using
    Save for Web. You should also make sure that
    Save for Web has been configured so that images are displayed using the document color profile (see attached screenshot for guidance).
    You should also ensure that your monitor properly calibrated and the gamma is set to 2.2.

    Same here. Didn't get any good New Years Eve photos indoors.

  • Why is the Image Verification display blank when I try to comment?

    Suddenly the IV window is blank when I try to comment on my blog (using firefox). If I write a comment, then enter gibberish into the IV confirmation field it returns a "no match" message (well sure, it would) but then this next time the IV image is normal and things proceed as they should and the message goes through normally.
    But it always takes two tries now, the first being used up trying to "match" to a non-existant IV image.
    The little icon next to the IV image field is "broken" in two on the first try also, then is whole on the second try, after the first failure.
    Evey time now it's this way, and just started today.
    iWeb 08 (2.04) - hosted on mobileme. OS X (10.6.7)
    What's up with that?
    thanks

    I just checked again this time connecting via Safari and got the same thing happening, only there is a "?" in the field where the Verification Image should be instead of the "broken page" symbol in Firefox.
    On the second try, after the "no match" error message, the verification image appears normally and it all works perfectly. It's like it has to be "nudged" into remembering how to work the way it should.
    I cleared the cache in firefox to no effect.
    The only thing I did prior to this happening was to change some page names in the website, which changed the navbar obviously, but it works fine as does everything else. What I did was change the page name "Blog" to "blog" to get consistency in the capitalization in the navbar. This changed the direct URL for the blog page, naturally, but that's not been a problem except for a few users who had to re-bookmark it to get there directly. Don't know yet if other users are having the same issue, but several comments have appeared without any feedback of a problem.
    I have iLife11 on its way to me and plan to upgrade to iWeb 3 when it gets here. Any hope that will straighten it out? (Yeah, I'm backed up with time machine, I read that post upthread about losing the whole enchilada.)
    The site appearance is fine as published, the blog works except for that one annoying and new little bug in posting comments online.
    I have no clue where to even begin looking at this point.
    If it was a Chevy, I could fix it.

Maybe you are looking for