Computor upgraded to 8.1 and now i have problems

ever since my computer upgraded itself to 8.1 i have had problems with pafes freezing , font is to large , or font is to small, didnt have any of these before

Johnny, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

I've just upgraded to V5.0 and now I have lost ability to 'open in new tab'

I've just upgraded to V5.0 and now I have lost ability to 'open in new tab' whats happening?

Thanks but I've reinstalled V4 until V5 is stable and more or less working the way I want to work - not the way some programmer thinks I should want to work.
You know change is OK but only if it makes things better for the user Change shouldn't be made to make the developer feel good about his/her expertise. For me V4 was Good. V5 gives me too many issues to deal with - I just need a relatively simple browser (and I guess I'm not the only 1 out there that feels like this).

HT1338 I downloaded upgrade to 10.9 and now I have lost my Safari. Can anyone help?

I have downloaded upgrade to 10.9 and now I have lostmy Safari. Can anyone help me get it back?

Hi, yes the application still show up there. My problem is still there, now I noticed I have a ? mark where my I Photo used to be.
Message was edited by: ladibug42

When I ran Lr 5 I was able to right click on a raw file and have it open in Lr. Upgraded to LR 6 and now longer have the option to open with Lr. Is there something I need to turn on Pc set up

When I ran Lr 5 I was able to right click on a raw file and have it open in Lr. Upgraded to LR 6 and now longer have the option to open with Lr. Is there something I need to turn on Pc set up

This is actually based on how the site handles different file types; Hotmail gives it to the browser as "application/octet-stream" or something like it, whereas sites that properly open it in the browser tag it as "application/pdf". Unfortunately there's nothing you can do about this without setting up a proxy to rewrite the HTTP headers. Complaints to Hotmail in the past haven't worked, and it's not possible to override the behavior in Firefox.

I upgraded to Mt. Lion and now I have duplicates in notes and contacts on my iPhone 3gs. Is this a sync issue? I have 4 e-mail accounts and the iCloud is one of them.

Maybe my title says to much. I have multple contacts, notes, sometimes just two, sometimes 14. I upgraded to Mt. Lion and that may be an issue or maybe syncing is the issue. It is making me crazy/er! I have 4 e-mail contact lists and that may be part of the issue with e-mail but why duplicate notes? I am stumped. Please give your thoughts for a solution. I have deleted the duplicates from iPhone (3gs, iMac, and iPad2).
Thanks,
Jim

I forgot to say that the duplicate entries return after I have deleted them. Strange to me is why do some contacts show up as many as 14 times. I am suspecting that there could be an issue with iCloud or iTunes. Truly a mystery to me for now.
Jim

I upgraded to mavericks yesterday and now i have the folder with question mark on start up

I've tried booting up pressing the option key and i get to the startup utility section but it won't let me erase, re-install or anything

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Installed update and now i have problems...help!!!

Ok so I accepted the last update sent by apple..updating itunes and quicktime and lord knows what else. Ever since my macbook shuts down to the screen that says "hold down power button for a few seconds to shutdown" with a bunch of other languages saying the same (i guess our version of blue screen. I attempted to call apple but in their new tradition its all about the dollar. So I dont have the resources to correct an update from causing havoc on my macbook. I have no idea whats wrong as I have not installed anything else since. Just now my macbook went to that screen seven times in less than 5 minutes and the kid on the other end of the phone was like "fee"..So i'm reaching out to you in hopes that someone can assist me in finding and fixing whatever is wrong. Perhaps someone else is having the same problem. I dont have a mac store near me either.

That's a kernel panic. Start with http://www.thexlab.com/faqs/kernelpanics.html for details on how to fix it.
Assuming you don't have a bootable backup/clone, I recommend that you get a bootable, external HD, and make a bootable backup/clone before updating. That allows you to revert to the previous good state without having to reinstall everything. Then, peruse these
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

HT3702 i can't upgrade my app store and mentions " i have problem with previous payments"

please help me.

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I installed Yosemite and now I have problems with my intuos tablet can i get some help

when I upgraded to Yosemite, I am having trouble with my Intuos tablet,

Does Intuos have an upgrade driver for Yosemite?

I updated to Mountain Lion and now I have problems

After I updated to Mountain Lion my iphoto, imovie, numbers, pages,keynote will not open it has an error that says, You can’t open the application “Pages.app” because it is not supported on this type of Mac.What do I do now?

I've read that if you update to Mountain Lion 10.8.2 this behavior has been "fixed."
Most users blame the implementation of Save As… as not working as it has in the past. I believe the issue is that autosave will save all changes but you can revert the original document to a previous version. Click the small triangle next to the document name in the title bar & choose browse all versions.

HT4623 I upgraded to the iOS 7 and now I have a moving blue box jumping around my screen that I can't get rid of. How do I make it go away?

I upgraded to iOS 7 and now I have a moving blue box jumping all over my screen. How do I make it go away?

Settings>General>Accessibility>Switches>Switch Source
Turn it off!

Added an AirPort express and now I have audio problems...

Hello here,
I enjoyed to have music streamed at the same time to my two AirPort Express in two different rooms until yesterday. Today I added a new Airport Express and now I have problems to stream the audio to all the three bases at the same time: sometimes the audio signal is dropped by some AirPort randomly. Here is my configuration:
1. One AirPort Extreme base station (main base)
2. Three AirPort Express
3. All the AirPort bases (4 total) are connected at the same Network through WDS (the main base is the AirPort Extreme one)
4. All the bases are updated to the latest firmware.
Any idea? Maybe the data is too much for the network to be handled? Isn't supposed to have limits, right? Theorically I could add as many AirPort Express bases I want without to have audio drops... or not?
Any help is very welcome.
Thank you in advance.
Sincerely,
Fabrizio

An 802.11g network has maximum real-world bandwidth of about 25 Mbps; most people will get less than that. Taking into consideration the 2.1 Mbps worth of audio streaming bandwidth (3 x 700 kbps) and the significant decrease in bandwidth inherent in a WDS network as complex as yours, I'm not at all surprised that you're having dropouts.
If you could run Ethernet to one or more of the Expresses from your AEBS (using an Ethernet switch if necessary), you could increase your effective wireless bandwidth to the point where your drop-outs should cease.

I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I upgraded to iTunes 8 and now it wont open at all

Ok so I upgraded to iTunes 8 and now every time I try to open my iTunes it says that iTunes has unexpectedly quit and it asks me if I want to relaunch it so I click relaunch and the same thing happens. iTunes is like my second life so can somebody pllleeeeaaaaassseeee help me!!

I would first see if you can open iTunes in a test user. This will give us some direction in troubleshooting the issue.
To create a test user:
1. Open System Preferences from your Apple menu
2. Click on the Accounts icon
3. If you see a closed padlock in the lower left hand corner, click on it and enter your admin password to allow changes
4. Then, click the + button
5. Enter the information you are prompted for, and then click "Create Account"
6. Restart the computer and log in to the new account
Once logged in, see if you can open iTunes. If not, I'd recommend reinstalling iTunes:
Go to your Applications folder
Drag iTunes.app to the Trash
Restart the Mac
Empty the Trash
Download & install from http://www.apple.com/itunes/download
If you can open it in the test account, return to your original account and try removing your iTunes preferences file.
Quit iTunes if it is running.
Navigate to /User/Library/Preferences/
Drag com.apple.itunes.plist to the trash
Restart the Mac
Launch iTunes again
If it still isn't working, try recreating the library per these steps:
http://support.apple.com/kb/HT1451
CG

Computor upgraded to 8.1 and now i have problems

Similar Messages

Maybe you are looking for