COMUNICAÇÂO COM DATA DASHBOARD

Bom dia!
Meu nome é Antonio Alberto, fiz aquisição de uma licença NI MYDAQ FOR STUDENT, para o qual estou terminando minha manografia referente a um sistema supervisório, onde envolve labVIEW e o aplicativo DATA DASHBOARD no iPAD (APPLE), ocorre que, estou tendo dificuldades na comunicação com o servidor e o DATA DASHBOARD, como vocês poderiam me auxiliar na conclusão deste projeto onde para mim é de extrema importância.
Grato,
Antonio Alberto

Olá Antonio,
Você poderia fornecer mais detalhes sobre a sua dificuldade?
Existem duas maneiras de se realizar a conexão: Shared Variables e WebServices. Tende-se a especificar sua situação para que eu possa te ajudar.
Fico no Aguardo.
"In theory, theory and practice are the same. In practice, they’re not."

Similar Messages

Link´s redudantes para a comunicação com a Sefaz

Boa tarde a todos!
Pessoal existe algum pré-requisito para se colocar uma alta disponibilidade de link´s (2 link´s) para
o ambiente PI GRC NFe (SLL-NFE 100 0018 SAPK-10018INSLLNFE x NFE 1.0) comunicar com as Sefaz?
Neste final de semana colocamos dois link´s para fazer o balanceamento e disponibilidade.
Mas todos os processos de comunicação com a Sefaz terminavam com time-out. Após deixar todo
trafego com a Sefaz em apenas um dos link o processo normalizar. Com o balanceamento ativado só tenho time-out.
Agradeço,
Pamplona
Caramuru Alimentos

Boa tarde Henrique, tudo bem?
No meu caso eu estou falando do link de internet.
No ultimo domingo 19/06 implementamos um 2º link de internet
de uma outra operadora. Quando subimos a aplicação o resutado
foi que toda a comunicação do nosso ambiente (consulta, aprovação, cancelamento, check status etc)
com a Sefaz terminava com erro por time-out.
Com isso fizemos um filtro aonde todo o trafego com a Sefaz voltaria somente a ser feito
pelo link da Embratel e nada seria feito pelo novo link da OI (apesar do link da Embratel apre-
sentar o dobro de latencia do link da OI). Com o filtro aplicado toda a comunicação com a Sefaz
se reestabeleceu e terminaram as mensagens de erro. Mas continuamos na dependencia de
ter a comunicação entre a empresa e a Sefaz trafegando por um unico link.
Agradeço,
Pamplona
Caramuru Alimentos

Issues with Using Data Dashboard and Using Web Service

After running a system for many months it has suddenly decided to not work at all. I am using Data Dashboard to read variables on a host. I'll outline the system here to get a baseline:
I'm running LV 2012 SP1 f5.
I collect data from one Ethernet port and interfact it to another Ethernet port to form a proxy.
I use a fixed IP address from my DSL along with port forwarding/port triggering in my router for data observation and control.
So, what have I done so far?
1. Repaired my original LV 2012 SP1 and tested system.
2. Upgraded to LV 2012 SP1 f5 and tested system.
3. Ran service.msc and checked all the NI services that should be operational. Started and stopped several of them and rebooted computer.
4. Deployed all my SVs (multiple times)
5. Disconnected second Ethernet interface becasue sometimes the variables would deploy to this IP address.
6. Turned off my wireless because sometimes the variables would deploy to this IP address.
7. Checked "Web Server Configuration" "Application Web Server" for correct port number.
8. Checked "Web Services Management" and under "Deployed Web Services" there is one category: SV is marked as running. NOTE!! WebService is NOT listed and this could be a problem
I can use the following to retrieve data&colon; localhost:<port number>/sv/variable. But when I substitute my DSL IP number, I can no longer get any data.
So, what am I missing?
Thanks,
Paul.

Siana,
Thanks for your response.
I haven't touched the NI code in months. It is running on an XP laptop and I have the Windows updates turned off. McAfee is running on it and of course that updates regularily. This laptop is a dedicated machine that I only use for this function, nothing else. I haven't added or subtracted any programs for many months.
There have been no changes to the DSL from me. AT&T is constantly trying to get us to upgrade to U-Verse but we have resisted. All DSL modem and router hardware is the same.
Confusing, huh?

What is the data type for the Data Dashboard XY Graph?

Hey all,
I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
What gives? Am I missing something obvious? Thanks for the help!!
Tom
Solved!
Go to Solution.

Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

Missing com.apple.dashboard.plist files

Just upgraded (Tiger 10.4.12 to Leopard 10.5.2). Everything groovy except for Dashboard which will not launch because there is no com.apple.dashboard.plist file in my Library.
Any remedies? Or am I going to have to start again and reinstall Leopard to get Dashboard working?

I did a complete ERASE and INSTALL upgrade, so all the former Tiger settings were wiped, or should have been.
Prior to the install I backed up my own files to an external.
The very first thing I did after the install was to run Time Machine and back up the whole system to a second external. This initial backup does not contain any dashboard plist files either, so it looks like they didn't install!

Dashboard doesn't work and com.apple.dashboard* files doesn't exist

Like the headline says, my dashboard doesn't work at all, and my com.apple.dashboard* -files doesn't exist in the preferences file.
Is there annyway to redownload or reinstall it?
Please help!

Hello there,
Have you tried killing the Dock Process through Activity monitoring and then relaunching it? I would also try logging out and then back in or doing a complete reboot of the machine to see if that helps.
If still no luck, it may be a good idea to trash the dashboard preference file.
The two dashboard preference files are in the following directory:
yourusername -> Library -> Preferences ->
The file names are:
com.apple.dashboard.client.plist
com.apple.dashboard.plist
Hope this helps.
B-rock

What is the speed of data transmission when using Data Dashboard?

Hello, everybody, I've seen that doesn't matter if an iphone or a chinese tablet is used, the speed of data transmission with Shared Variables and Data Dashboard is almost the same, and is low speed. Does anybody know how could I measure this speed of transmission? Thank you in advance.
Impossible is nothing
Solved!
Go to Solution.

Hello there;
The update rate of the Data Dashboard for 1.0 is fixed 1 second for webservices and 0.2 seconds for network shared variables, depending of course on how much information is streaming on the network . On the second version of Data DAshboard you can specify your update rate within a range
You can find that info in this KB
Hope this info helps.
Cheers

How to show a waveform signal in data dashboard and UI builder ???

Hey guys.
I have made a program that collect analog data from two vibration sensors and then i use the signalexpress power spectrum to get it in the frequency domain.
I would like to show the signals and the FFT in data dashboard and in UI builder and have some problems doing so.
I'm using Network shared variables and web services.
First question:
It seems that I'm loosing some data when I go through the Network shared double variable. I know that this is becouse i'm using a double variable and I would like to send a waveform but that is not possible becouse the charts in UI builder and data dashboard do not support waveform or?
Second question:
This is almost the same problem as the first question.
Its not possible to show the data directly from the signalexpress power spectrum becouse the XY graph in data dashboard only supports array of cluster of two numerics right ?
Is it possible to convert the data from the signalexpress power spectrum to array of cluster of two numerics ?
Or any other ideas would be appreciated

Hi Genex.
It is important to say, that the Network Shared Variables are not lossless. That might explain the behavior you are seeing. I would not expect the update rate of the UI Builder to be that high, which could lead to data loss.
For more information about choose the right network protocol, wether it is only for monitoring or streaming all available data, see the following article:
Using the Right Networking Protocol
Also, I have posted a reply to your other post about your second question.
Best Regards
Alex E. Petersen
Certified LabVIEW Developer (CLD)
Application Engineer
Image House PantoInspect

Com Data Control in Siebel 8 with c#

Hi,
I am looking for sample code in Com Data Control in Siebel 8 with c#. Couldn't find it in metalink. thanks in advance.

1. Add Siebel Business Object Interfaces Type Library COM component to the project references
c# com referencec
2. Place a button on the form and add the following code
try
// instantiate the siebel data control
SiebelBusObjectInterfaces.SiebelDataControl sblDataControl = new SiebelBusObjectInterfaces.SiebelDataControl();
//login to the object manager
sblDataControl.Login("host=\"siebel://APPAU227DEV208:2321/DEV06_ES/FINSObjMgr_enu\"", "devuser4", "devuser4");
//do something
SiebelBusObject oBO;
SiebelBusComp oBC;
oBO = sblDataControl.GetBusObject(“Service Request”);
oBC = oBO.GetBusComp(“Service Request”);
MessageBox.Show(oBC.Name());
catch (Exception err)
// oops.. an error has occurred
MessageBox.Show(err.ToString());
The syntax for the connect string host=”Siebel://….” can be found in the eapps.cfg file for the server (SWEApp\Bin\eapps.cfg). Sometimes there are extra settings (eg. Single sign on) on the normal object manager (eg. FINSObjMgr_enu) so you need to try using another object manager (EAIObjMgr_enu)
3. Once the Siebel data control is logged in, you can pretty much do as you please with the normal Siebel scripting syntax. (ie, cleartoquery, setsearchspec, executequery, etc.,etc.,)
With immense power comes great responsibility … With the Siebel objects exposed, you can pretty much do as you please. I’ve used this mainly to import and export data out of Siebel

Oracle Com Data Cartridge

I have installed Oracle COM Data Cartridge, but I have problem with creating objects.
While calling ORDCom.CreateObject method I always get error represented by HRESULT value = -2147467259 (Ox80004005). Does anybody know what may be purpose of this error?
null

Hello Wei Xiong,
I have the same error when I trying to configure Oracle CQL Processor Table Source according to :
http://docs.oracle.com/cd/E23943_01/dev.1111/e14301/processorcql.htm#CIHCCADG
I've configured table source and had the same error on deployment :
<The application context "check_entrance" could not be started: org.springframework.beans.FatalBeanException: Error in context lifecycle initialization; nested exception is com.bea.wlevs.ede.api.StatementException: Could not start rule [DBEventQuery] due to error: java.lang.ClassNotFoundException: weblogic.jdbc.wrapper.PoolConnection
org.springframework.beans.FatalBeanException: Error in context lifecycle initialization; nested exception is com.bea.wlevs.ede.api.StatementException: Could not start rule [DBEventQuery] due to error: java.lang.ClassNotFoundException: weblogic.jdbc.wrapper.PoolConnection
at com.bea.wlevs.spring.ApplicationContextLifecycle.onApplicationEvent(ApplicationContextLifecycle.java:145)
It's look like a same issue.
I've added zip file of my Eclipse project and config.xml of my CEP domain to e-mail.
Thank you !
Regards,
Dmitry

Problemas de Comunicação com SEFAZ PE - Urgente

Boa tarde!
Pessoal,
Ontem a SEFAZ de PE ficou fora o dia inteiro.
Hoje ao acessar o Portal, vimos que a SEFAZ PE está on.
Mas no GRC, quando vou verificar o status de serviço da SEFAZ PE código 26, está inoperante.
Alguém está passando por isso?
Estou em ambiente de Produção com cerca de 100 notas paradas, pois não consigo enviá-las a SEFAZ, por causa do status 70 da SEFAZ PE 26.
Pensamos entrar em contingência até resolver o problema, mas colocá-las em contingência manualmente é muita coisa para cancelar e fazer cópia da NFe comutada.
Aguardo comentários, ajuda....
OBrigada.
Adriana

A SEFAZ/PE está muito intermitente, e além de tudo, ela simplesmente não desliga o serviço de recepção dos arquivos enviados, travando nossos serviços de mensageria.
O que fizemos como uma solução paleativa, foi alterar o webservice de recepção, forçando para que não ocorra a comunicação automática, convertendo as NFEs para Contingência DPEC junto à SEFAZ Nacional (RFBrasil).
Webservice de recepção original: "https://nfe.sefaz.pe.gov.br/nfe-service/services/NfeRecepcao?WSDL"
Webservice de recepção alteramos: "CHANGE:https://nfe.sefaz.pe.gov.br/nfe-service/services/NfeRecepcao?WSDL"
No dia seguinte no primeiro horário da manhã, ajustamos novamente o "webservice" de recepção para o formato correto, e então reenviamos as NFEs aprovadas via DPEC para que sejam protocoladas junto à SEFZ PE.
Pelo menos até o dia 22/09, data prevista em que SEFAZ PE está prometendo manter esse serviço intermitente, estaremos trabalhando dessa forma.
Nossos caminhões não tem sofrido nenhum tipo de problemas em barreiras fiscais estaduais e federais trafegando com DANFEs protocolados junto à SEFAZ Nacional através da Contingência DPEC.
Espero ter colaborado de alguma forma.
Obrigado,
Eduardo Pini

Momento de disparo comunicação com GRC NF-e (Processo SD)?

Boa tarde a todos!
Uma dúvida interessante:
Qual seria o real momento de disparo de comunicação entre o ERP e o servidor GRC NF-e em um processo SD?
Imagine um cenário no qual a liberação contábil é feita após o salvamento do faturamento.
a. Seria no momento de se salvar o documento de faturamento;
b. Ou seria no momento de se liberar o documento para o lançamento contábil?
Acredito que seja a primeira opção, mas tenho dúvida.
Outra dúvida:
Seria possível, no caso de o disparo ser no momento de se salvar o documento de faturamento, realizar alguma configuração no SAP para que, ao invés disso, o mesmo realizasse o disparo no momento de se liberar o documento para o lançamento contábil?
Obrigado pela atenção,
Daniel.

A data de escrituracao = posting date da J_1BNFDOC.
O problema é para notas emitidas perto da meia noite, em que a autorizacao pode vir só no outro dia, é isso?
Pq nao tem hora pra escrituracao, só data, entao só vejo problema em querer alterar a data, a nao ser nesse caso.
Mas note que a NF-e nao aparece no livro (ou nao deveria aparecer) enqto ela nao estiver autorizada (docstat = 1, statcode = 100), ou aparece como cancelada (se ela tiver sido cancelada ou inutilizada, flag de cancelled = X).
De qq maneira, se vc quiser, pode analisar a possibilidade de alterar o valor do posting date no metodo call_rsnast00 da badi cl_nfe_print (que eh chamada no retorno do grc pro erp), e alterar qdo a nfe for autorizada (status atual = aguardando resposta e status da sefaz = 100 (autorizada)). Nao sei se dá, tem q ver os parametros q sao passados.
Abs,
Henrique.

Comparar data de entrada com data de saida e se a saída estiver atrasada ficar em vermelho na datagrid

Boa tarde
Gostaria de saber como eu comparo duas datas em um Datagridview e se aquela data estiver maior do que o estipulado para executar o serviço ela fica em vermelho
Grato
José Henrique

Hi,
Because this is an English forum, please post questions in another forum which uses your native language for better response.
Thank you for your understanding.
Best regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ERRO DE COMUNICAÇÃO COM SEFAZ

Bom dia!
Ao tentarmos enviar uma verificação de status à SEFAZ, ocorre o seguinte erro em PI:
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message SRVSC_nfeStatusServicoNF_SYNC_OB, request message, namespace http://sap.com/xi/NFE/005a)</SAP:Stack>
Entendemos que seja um problema com a instalação, pois não tivemos erro nos ambientes de D (desenvolvimento) nem no Q (testes).
Verificamos a configuração de integração e o servidor de aplicação no sxmb_adm.
As proxies parecem estar registradas.
Nunca funcionou no ambiente de Produção.
Alguém pode ajudar?
Obrigada,
Fabiana

Fabiana,
A partir de hoje eu e outros usuários estamos recebendo um erro justamente nesse WS:
SRVSC_nfeStatusServicoNF_SYNC_OB
estava funcionando normalmente até sexta-feira, no meu caso no ambiente de homologação, estamos suspeitando que seja algo referente a certificado.
Abs,
Marco

Is the data sent to COM Hex string?

First.I don't know who should change the data to ASCII,me or COM ?
Second,I want to know if the data sent to COM is only Hex string?

In Labview, the data sent to the com port is usually a string that is sent to the com port as the hex equivalent. If you want to send hex, use the \ codes for stings while displaying the string in slash codes format. The only thing being sent to the com port is hex.
The data received on the com port is usually hex that is interpreted into ascii by LabVIEW. Sometimes the sender of the com data formats the information in another way. The programmer will have to convert data (which looks like gibberish in a string) into the proper format.
Jeremy Braden
National Instruments

COMUNICAÇÂ​O COM DATA DASHBOARD

Similar Messages

Maybe you are looking for

COMUNICAÇÂO COM DATA DASHBOARD