Condition control and origin ??

hi,
can any one tell me what does condition origin and condition control ?
what is their significance of them in pricing ?
any examples please
regards
sriram.

Hello,
Here is some useful information on condition control - KSTEU
KSTEU is a very important attribute of a condition. The condition control has two purposes:
a) to record manual changes
b) to control how a condition is handled.
KSTEU is very helpful if you want to reconstruct the history of a condition in a document. The KSTEU of a condition can be changed in various places. The most common case is, that the KSTEU is changed during the copying of the conditions from one document into another. PRICING_COPY is the function where this takes place and it also depends on the pricing type (MODE in PRICING_COPY), the origin of the condition KHERK and the actual value of KSTEU. Please refer to the coding of PRICING_COPY itself for the precise rules. Besides copying conditions there are several other occasions where KSTEU might be changed.
The most common KSTEU value is 'A':
A : Adjust for quantity variance. A condition with a KSTEU = 'A' is recalculated in a normal way. The rate has been automatically determined (e.g. via a condition record). The condition is not fixed at all. Especially when the item quantity is changed, the rate might be adjusted if scales are present. All formulas associated (base value, value etc) are executed the normal way. If a condition is automatically found, A is the normal KSTEU value.
I could go on and explain the other possible values of KSTEU. If you want information on any one specifically, please let me know.
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Similar Messages

I am using my ipad 2 ( bought in USA) for about 3 years. 2 weeks back the touch gesture was completely out of control and the screen was jumping automatically to so many applications. I attempted to get original settings through settings menu, but unfor

I am using my ipad 2 ( bought in USA) for about 3 years. 2 weeks back the touch gesture was completely out of control and the screen was jumping automatically to so many applications. I attempted to get original settings through settings menu, but unfortunately while resuming when I typed a pass code the touch gesture , without control it typed unknown passcode and while confirming the passcode as well same thing happened.
Now my Iapd2 is disabled and itunes also not recognizing my ipad.
I kindly request you to help me to fix the issue.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Report Control and Multiple Datasets/Result Sets

I have four results sets, Plan, Forecast, Actual and SPLY per eight different product lines. I want to add conditional formatting of background color if actual is above or below Plan and/or Forecast. The report needs to export properly to Excel.
Is there a way I can use one control rather than multiple text boxes to display the data, allow for conditional formatting and export to Excel.? Thanks!
Environment:
SSRS 2010
SQL Server 2012

Hi blairv,
If I understand correctly, you have a dataset in the report which include four fields: Plan, Forecast, Actual and SPLY. Each filed contains eight values.
In SQL Server Reporting Services (SSRS), we can use table, matrix or list display report data in cells. The cells typically contain text data such as text, dates, and numbers but they can also contain gauges, charts, or report items such as images.
Reference: http://technet.microsoft.com/en-us/library/dd220592.aspx
In your case, we can use expression to configure these items background color. Please refer to the following steps:
Click a specific text box in the report. Click BackgroundColor prompt in the Properties dialog box.
Click Expression prompt. And fill with expression below:
=IIF(Fields! Actual.Value>Fields! Plan.Valeu Or Fields! Actual.Value>Fields! Forecast.Valeu,”Red”,”Blue”)
Reference: http://msdn.microsoft.com/en-us/library/ms157328.aspx
If there are any miunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

SQL Query (updateable report) Region - Conditionally Hide and Set Values

SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
       contract_id,
       CASE WHEN hardware_id IS NOT NULL THEN
               'HA'
            WHEN backup_dev_id IS NOT NULL THEN
               'BD'
            WHEN hardware_os_id IS NOT NULL THEN
               'HS'
       END item_type,
       hardware_id,
       backup_dev_id,
       hardware_os_id
FROM   "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID         NUMBER                        NOT NULL,
CONTRACT_ID     NUMBER                        NOT NULL,
HARDWARE_ID     NUMBER,
BACKUP_DEV_ID   NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
      (    hardware_id    IS NOT NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NOT NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NOT NULL
      )    Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value     Return Value
Hardware Asset    HA
Backup Device     BD
Computer System   HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far...

Unable to allow remote control and deny transfer files in RM

Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

Originally Posted by spond
Newellt,
I can't see why it would be necessary, I suggest you open a Service
Request and complain!
Shaun Pond
Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

Why does iPhoto 6 imports all photos in two folders: modified and original

I upgraded from iPhoto 5 to 6. Now I have all my photos in the order and with the name I have given to the rolls. Great!
However, everytime I import new photos from my compact flash card iPhoto automatically modifies the photos by reducing the size and adjusting the orientation. These photos are on average 25-50% of the original size and are saved under the folder: pictures /iPhoto library /modified.
At the same time iPhoto saves the original photos to the folder: pictures/iPhoto library / originals.
The problem is that having more then 6GB of photos this set-up starts to fill my harddisk (presently an additional 2 GB).
How can I change or cancel this feature. Does anybody have an idea or similiar expierence.
thanks, Baguette

baguette
How can I change or cancel this feature
You can't.
Does anybody have an idea or similiar expierence.
Everybody does.
iPhoto is not just an image viewer, but is a Database with a built-in image viewer, version control and lightweight editing.
A Note about the iPhoto Library Folder:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way. This also includes photos that have been auto-rotated by your camera.
This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
So each element is there for a reason and there is no actual duplication.
The notion of version control (the ability to revert to an Original) is central to the philosophy of the application, and if you don't want the feature, then the application may not be for you. There are many image viewers available.
Regards
TD

How to change condition control from C to E

Hi all guys, need you hope on below question:
I 've created a new condition type, which is a fix amount/accrual, and going to be used in billing plan sales order. but, when I issue the first invoice (30% of sales order), this accrual condition type is supposed to post 30% as well. but it posted full amount. I have checked all condition type, pricing procedure and copy control config. nothing is wrong. only one thing is condition control XKOMV-KSTEU = C when I check my invoice. but I think it's supposed to be E.
Would any guy tell me how to make XKOMV-KSTEU=E, or any other solution can be provided.
(by the way, I have read below link, but still dont know where to do that change? it belongs to config or coding change?
http://wiki.sdn.sap.com/wiki/display/SD/Pricing+Conditions)
Thanks in advance.
Vic

Hi,
As per the standard,
Billing plan will divide entire billing amount as per the refernce billing plan (Billing dates/milestones and %values). All the condition values in the pricing procedure, including taxes, will be divided proportionately as per billing plan only.
Regards,
Sharan

Purchase order Condition control tab?

Hi,
Here in the purchase order condition control tab I need to get Price Date and Price date category. Presently they are not appearing in my purchase orders. When I go to screen layout, I am not able to get those fields to configure.
Could please anybody help me urgently?
Thanks,
Bhairav

Hi
GOTO----> OLME--> PO -> Define Screenlay out at Document level -> There Choose your Field Selection ( NBF and ME21N)... and go into to details--> And select the field selection group Quantity and Price and Double Click--> There you choose the field <b>PRICING DATE CONTROL</b> and Check it as a Required Entry or Optional Entry and save . <b>DO IT FOR BOTH NBF and ME21N FIELD SELECTION.</b>
Now when ever you make PO in ME21N.....You will get Pricing Date Category and Price Date Fields in PO-> Item Details---> Condition Control Tab.
Reward if useful
Regards
S.Baskaran
Message was edited by:
baskaran srinivasan

Is there anybody know the meaning of Condition control in pricing?

Hi everybody,
When I create a sales order in CRM,and the system will call IPC for pricing calculation,
Object "pricingcondition" is one of the parameters,in which there is a field named "m_control",it's condition control.
As far as I know,it has some potential values,such as "A","B",and "C".Is there anybody knows the meanning of them?
Thanks.
Edited by: Jerry cui on May 20, 2010 8:20 AM

hi,
This field Indicates whether the prices or values in a condition are fixed or whether they have been changed and, if so, in what way. For example the indicator shows, for example, if the prices generated by a condition have been changed manually during processing.
A     Adjust for quantity variance
B     Free
C     Changed manually
D     Fixed
E     Condition value and basis fixed
F     Condition value fixed (billed items)
G     Condition basis fixed
H     Condition value fixed (cost price)
This field is same as the R/3 field KONV-KSTEU.
Thanks and Regards
shanto aloor

I accidentally held down control and zoomed in, and it enlarged my entire screen. How do I get the zoom on my screen back to normal?

This is my first Mac so it's pretty much foreign to me. I was holding down control and accidently used two fingers to zoom on my track pad, and it zoomed in on my entire screen. How do I zoom out and get my screen back to normal?

On the track pad control while moving two fingers down to zoom out to the original size and control plus two fingers moved up to zoom on.
Alternatively if you have a magic mouse use control and drag one finger up and down on the mouse to control zooming. If mouse wheel use control and move the wheel.

Condition Control (KMOV-KSTEU) always shows "C" Manual

When performing the final settlement of customer rebates in
VBO2 > Rebate Payments > Final Settlement > Using Payment Screen
The condition type for Customer Commission (BO08) is always showing condition control as "C" changed manually even when the Commission Settlement document is created automatically. What happens then is that when the Rebate Credit Memo is created the reversal of the accural does not take place. The condition values in that are 0.00.
The condition control is supposed to be 'E' Condition Value and basis fixed. this Condition Type is never changed manually, it based on a percentage in the condition records of the rebate agreement.
How can I change the condition control so that it is always 'E'?
Thanks.

Refer Note # 943329

Output control and outbound parameters

Can you please help me locate the output control and outbound parameters...
thank you in advance...

Hi Pabito,
I am assuming that you need to send an outgoing EDI - Mail or fax to a specific partner. This process is possbile if you could set up the output control for sales documents.
spro->sales & distribution -> BF -> Output control-> output determination -> maintain output determination for sales documents -> Assign output types to partner function.
Make sure that an output determination procedure is assigned to the sales dco type.
Also Maintain condition records for the output type and the transmission medium(EDI) using the trx NACE.
I hope this is what you are looking for, i also have a faint notion that you might be lookin how to setup an edi connection with the partner.!!!
If my notion is right do ping back to know more abt that,If you find this piece of information do take some time to award points to mee
- Girish

Best way to control and read data from multiple instruments?

Hello,
I'm building an application to test power supplies involving multiple pieces of equipment over a couple of different comm busses. The application will also send control instructions to some of the instruments, and read data from some of the instruments. The reading and control profiles will not run on the same schedule (variable length control steps, configurable read interval).
I was thinking of using a queued statemachine (producer/consumer) for the control profile and another to read the data, but I got concerned that there would be collisions between sending control commands and read commands to the same machine. Is there a suggested design pattern for implementing something like this?
Timing of the commands isn't critical down to the milisecond, but I need to collect reasonably accurate timestamps when the data is read. The same is true for the control commands.
Here are the instruments I'm going to use, if the are control, read, or both, and the communication method
Instrument Funtions Comm Method
Power Supply Read data Communicates to PMBus Adapter
PMBus to USB Adapter Read data USB (Non-Visa)
Switch control relays USB (VISA)
Power Dist. Unit read data/control outlets SNMP (Ethernet)
Electronic Load read data/control load GPIB (VISA)
Thermal Chamber read data/control temp Ethernet (VISA)
Thanks,
Simon

Hello, there is a template in LV called "Continuous measurement and Logging".
It can give you some idea how to properly decouple the "GUI Event handler" top loop (where your Event structure is) from the DAQ and other loops.
You do not need to totally replicate the above example, but you can find there nice tricks which can help you at certain points.
The second loop from the top is the "UI message loop". It handles the commands coming from the top loop, and regarding to the local state machine and other possible conditions and states, it can command the other loops below.
During normal run, the different instrument loops just do the data reading, but if you send a control command from the top loop to a certain instrument loop (use a separate Queue for every instrument loops), that loop will Dequeue the control command, execute it, and goes back to data reading mode (in data reading mode the loop Dequeu itself with a "data read" command automatically). In this way the control and data read modes happen in serial not in parallel which you want to avoid (but I think some instrument drivers can even handle parallel access, it will not happen in really parallel...).
In every instrument loop when you read a value, attach a TimeStamp to it, and send this timestamp/value couple to the DataLogging loop via a Queue. You can use a cluster including 3 items: Source(instrument)/timestamp/value. All the instrument loops can use the same "Data logging" Queue. In the Datalogging while loop, after Dequeue-ing, you can Unbundle the cluster and save the timestamp and data-value into the required channel (different channel for every instrument) of a TDMS file.
(Important: NEVER use 2 Event structures in the same top level "main" VI!)

RE: ActiveX control and Active Server Pages?

Martin, if it works in standalone VB program but not in an .asp page
through VBScript, I guess the reason may be the type mismatch on the
parameters of the ActiveX automation methods. VBScript is a subset of VB
and only supports the OLE data type VARIANT for calling the OLE
interface. The Conductor ActiveX control probably requires the actual
data types, such as long, BSTR, and so on, to be used on the parameters.
As a result, VBScript cannot call the methods on the control. One
workaround you can try is to create your own ActiveX control which is
simply a wrapper for calling the Conductor control. Its parameter types
use VARIANT and you do the data conversion in your wrapper code. Hope
this helps.
Lenny Hon
Descartes Systems Group
-----Original Message-----
From: Martin Peters [SMTP:[email protected]]
Sent: Monday, July 27, 1998 10:50 AM
To:
Subject: ActiveX control and Active Server Pages?
Hello Forte users,
Did anyone try to use the ActiveX control that ships with Conductor
1.0G in an Active Server Page?
I tried to use the ActiveX control without luck, so a sample would be
appreciated. The code
works fine in Visual Basic.
Below the code:
<HTML>
<BODY>
<%
Set thisDirectory =
Server.CreateObject("CONDUCTORCLIENT.WFDirectoryServiceCtl.1")
Set thisEngine = thisDirectory.WFFindEngine("ceengine", "centrale")
Set thisUser =
Server.CreateObject("CONDUCTORCLIENT.WFUserProfileDescCtrl.1")
thisUser.New
thisUser.ProfileName = "MiniUP"
thisUser.userName = "martin"
' The following call fails: Invalid procedure call or argument:
'thisEngine.OpenSession'
Set thisSession = thisEngine.OpenSession("CREATE", thisUser, "martin",
0)
Set thisProcess = thisSession.CreateProcess("MiniPD", Empty)
thisSession.CloseSession (WFSESSION_TERMINATED)
%>
</BODY>
</HTML>
Martin Peters
COMPAQ
NSIS - AD&I - Application Connect
email <[email protected]>
phone: +31 (30) 2834902
fax: +31 (30) 2834980
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I don't have 6.1 in front of me now. I came up with a workaround for my application when I encounted this problem. I created an attribute node for the container and the tab control. Whenever the tab control was not on the page with the control, I made the container invisible. This then hid the activeX control.

Remove Video Controls and add Replay button on page

Hello,
I am trying to create a page in Adobe Edge that loads a video without any controls (play, slider bar, volume, full screen) and then displays a replay button after the video finishes which will start it from the beginning.
Currently I am able to load the video file and have it play to the end and stop, but I can't seem to get a replay button working. I also can't find a way to disable controls on the video so they do not show.
Here is the code I am using to load the video:
// insert code to be run when the composition is fully loaded here
$("#Stage").css("margin","auto")
sym.stop();
// original video play code starts here
// create a text object called vid;
var vid = $("<video width='980' height='300' controls='none'>" +
   "<source src='video.mp4' type='video/mp4' />" +
   "<source src='video.webm' type='video/webm' />" +
   "<source src='video.ogv' type='video/ogg' />" +
   "This browser is not compatible with HTML 5" +
"</video>"
sym.$("replay_btn").stop().animate({"size":"absolute", "top":"-265", "left":"7", "opacity":"1"}, 0);
// stage symbol lookup, and append the above vid object to it;
// in other words, get the div called 'vcontainer' and attach the video control to it;
sym.$("vContainer").append(vid);
// additional options for the video object
vid.attr('autoplay', 'autoplay');
vid.attr('preload','auto');
vid.attr('controls', 'none');
// End original code
// this is the insert for the action after the video ends
$(vid).bind("ended", function () {
sym.$("vContainer").stop().animate({"size":"absolute", "left":"0", "opacity":"0"}, 0);
sym.$("replay_btn").stop().animate({"size":"absolute", "top":"394", "left":"19", "opacity":"1"}, 0);
$("#Stage").on('click','#replay_btn',function(){
vid.pause();
vid.currentTime = '0';
vid.play();
sym.$("vContainer").stop().animate({"size":"absolute", "top":"133", "left":"0", "opacity":"1"}, 0);
vid.removeAttribute("controls");
As you can see, I tried a few ways of disabling the controls, and I also tried adding the replay function to the button itself, but neither of those worked. Any advice or information on controlling the video control display and replay function in Adobe Edge would be very helpful.
Thanks!

In case anyone is interested in the replay button, I was able to find code that worked:
var myVideo = document.getElementById("activeVideo");
myVideo.currentTime = 0;
myVideo.play();
This is executed when the replay button is clicked. Just be sure to set the video in question's ID to "activeVideo".
I am still unable to turn off the controls on the video. It seems like some of the code I have tried should work, but I haven't had success yet.
I've tried all of the following:
var vid = $("<video width='980' height='300' controls='none'>"
var vid = $("<video width='980' height='300' controls='0'>"
var vid = $("<video width='980' height='300' controls=''>"
vid.attr('controls', 'none');
vid.attr('controls', '0');
vid.attr('controls', '');
But nothing has worked so far. Any help would be much appreciated.
Thanks!

Condition control and origin ??

Similar Messages

Maybe you are looking for