Condition not getting Statistical

Dear Friends,
In the pricing procedure I'm checking Statistical check box for one Condition Type so that it is not calculated in the Net price or Taxes. But issue is that even after checking Statistical check box the value of that C.Typ is being calculated in the Taxes & value is not turning black (it is still blue- so its active). On double clicking that Condition Typ, statistical check box is not coming in the item- Conditions- Detail. Please help as I want to make it Statistical.
Thanks.

hello, friend.
there are a few more points to consider... if you look at the pricing procedure, there are certain condition types that are "statistical" that still have relevance to pricing. so, although statistical condition types may not have any account keys and are by themselves not posting to any GL accounts, they can still be used as basis for price calculation relevant for posting. examples are those that are percentage based (e.g. MWST, % discounts, % surcharges, etc.).
in your case, please look not only at the statistics indicator (in condition types via V/06, and pricing procedures via V/08), but also at the sequence of condition types/calculation, calculation base, requirements and routines.
regards.

Similar Messages

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

PO line item condition not getting changed

I am trying to change one condition in PO line item via BAPI_PO_CHANGE. It is not getting changed.
But the return message says Ind. limited tend PO 7100076060 changed, S (type),06 (ID), 023(Number).
The code is
zpo_cond-condition_no = itab-knumv. (1001384871)
zpo_condx-condition_no = itab-knumv.(1001384871)
zpo_cond-cond_st_no   = itab-stunr.(960)
zpo_condx-cond_st_no = itab-stunr.(960)
zpo_condx-cond_st_nox = 'X'.
zpo_cond-cond_count   = itab-zaehk .(01)
zpo_condx-cond_count = 'X'.
zpo_cond-itm_number   = itab-ebelp.(000010)
zpo_condx-itm_number = itab-ebelp.(000010)
zpo_condx-itm_numberx = 'X'.
zpo_cond-cond_type = itab-kschl.(ZI%)
zpo_condx-cond_type = 'X'.
zpo_cond-cond_value = p_per.(6.000000000)
zpo_condx-cond_value = 'X'.
zpo_cond-cond_p_unt = punit .
zpo_condx-cond_p_unt = 'X'.
zpo_cond-cond_unit = unit.
zpo_condx-cond_unit = 'X'.
zpo_cond-change_id = 'U'.
zpo_condx-change_id = 'X'.
APPEND zpo_cond.
APPEND zpo_condx.
      CALL FUNCTION 'BAPI_PO_CHANGE'
         EXPORTING
           purchaseorder                = zpo_header-po_number
           poheader                     = zpo_header
           poheaderx                    = zpo_headerx
        TABLES
          return                        = l_return
          poitem                        = zpo_item
          poitemx                       = zpo_itemx
           pocond                       = zpo_cond
           pocondx                      = zpo_condx .

Hi,
1)In po item give a unique no.(ex:0010) & ITEMX as a new line item with same no will be created.
2) service No. will be system generated. Pass packno = variable(ex:= '0000000001' ),
subpackno=variable +1 (ex: '0000000002' )
thanks & regards.

Delivery Condition not getting picked up during IV

Dear All,
We are facing a problem, while posting IV thru MIRO, delivery condition(e.g. FRB1-Freight (Value)- NN) is not getting calculated automatically.
Is some customization settings missing?
Thanks in Advance,
Ritesh.

IN MIRO U select 3 rd Option Goods/ Service item + Planned Delivery cost
Then in the MIRO Freight will come
Other wise select 2nd Option in this case only Freight will come
Biswajit

Scheduling Agreement - Conditions not getting copied from Contracts

Hi All,
Requirement: Global outline agreements with scale prices will be created in SRM which will be into ECC as Contracts. Scheduling agreements will be created referecing the Contracts and the conditions with the scale prices needs to be copied into the scheduling agreement.
Issue: We could create Global outline agreements in SRM and are getting replicated into ECC as contracts successfully. Conditions and the scale prices are not getting copied into the Scheduling agreement from the Contracts.
Please guide.
With regards
Krishna

Hi,
I couldnt reach out a solution for this problem.
SRM Version: SRM 5.0
Yes. We create Scheduling agreements referencing the contracts.
With regards
Krishna

Ecess and SEcess Condition not getting

Hi all,
Condition type for Ecess and Secondory Ecess not viewed at development server,i.e. Ecess cond: Jecs, Jec1, Jec2, Jec3.., SEcess:Jhx1, Jhx2...are Standard condition or We have to manualy create this condition.
If this is a standard condition then how we can get this condition,is there any specific patch we have to upload? Which is?
Kindly provide the solution ASAP.
Thanks & regards
Sanjay L

Hi follow the steps mentioned below to configure the same.
PROCEDURE: Initial Steps
Create two new Tax conditions: JA1S, JA1I. Steps for creation of Tax Condition is illustrated below
1.     JA1S must be a copy of JEC1
2.     JA1I, a copy of JEC2
3.     The text for JA1S - A/P SECess for Setoff
4.     The text for JA1I - A/P SECess for Inven
5.     Create a new tax posting key VS1. The path for this is:
SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Basic Settings  Check and Change Settings for Tax Processing
6.     Assign a new G/L account to the tax posting key VS1. in the following path:
SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Posting  Define Tax Accounts
7.     Assign the posting key VS1 to the tax condition JA1S in the tax procedure as given in the screen shot below.
8.     Assign tax posting key NVV (already existing) to the tax condition JA1I.
The tax procedure should look as follows (with these two new tax conditions):
PROCEDURE: Additional Steps
u2022     The new step is for the condition JA1S and this is computed with the value in step 222(Sub total of all excise duties excluding ECess ) as the base.
u2022     Another new step is for the condition JA1I and this is computed with the value in step 223(Sub total of all inventorized excise duties excluding ECess ) as the base.
GENERAL PRECAUTION
1.     Please note that these steps need not be the same in your tax procedure.
2.     This is merely an illustration of the logic to be applied.
3.     These changes will enable computation of taxes in the PO/SA, and in posting the Goods receipt with the inventory considering Secondary and Higher Education Cess too.
4.     These changes are for Domestic Purchase Orders ONLY.
With these changes in place, run transaction FTXP. Choose the relevant tax code. Enter 1% as value against the tax conditions JA1S or JA1I in the tax code. Illustrated next page is a sample tax code for easy understanding:
Account Determination:
Menu Path: SPRO Logistics u2013 General Tax on Goods Movements India Account Determination Specify Excise Accounts per Excise Transaction
Add new Entry with GRPO transaction type and DC Indicator as Debit and Account name as RG23AT1 and PLAAT1.
Repeat the same for all MM excise transactions.
Menu Path: SPRO Logistics u2013 General Tax on Goods Movements India Account Determination Specify G/L Accounts per Excise Transaction
Assign the RG23AAT1, RG23CAT1 and PLAAT1 GL account for the Excise Group and Transaction type GRPO and others.
- Munna

Freight Condition not getting copied from order to billing

Hi,
Here at my clients place, i have created new condition type for freight(which will be calculated after excise duty and VAT).This conditon type should not increase the order value but increase tax amount in sales order item level.
For this i have created new conditon type ZFRI-Manual Condition
Condition Class- D (taxes)
Calculation Type- B (Fixed amount)
Condition Category-F (Freight)
In sales order i have maintained this condition manually and done PGI,
Now when i am going to create billing that condition is not displaying in billing-VF01.
Kindly suggest...where to check...
thanks in advance...

Dear Ullas,
In your Billing document go to Item Condition detail screen & there would be a button on bottom of the screen - Update.
Double click on this update button & select G - Copy pricing elements unchanged and redetermine taxes.
This would solve your problem.
If not, then check copy control setting between your Sales, Delivery & Billing Documents.
Hope this helps.. .
Give points if useful...
THanks,
Jignesh Mehta

Custom pricing condition not getting triggered automatically in CRM 4.0

Hi
The custom discount pricing condition created in R/3 is active in R/3 and is getting triggered for Sales Orders created in R/3.
I have downloaded the same pricing conditon from R/3 to CRM 4.0 i am able to trigger it manually in CRM service transaction. But i need the condition to be triggered automatically for the pricing group.
Your inputs are highly solicited
Thanks
Padma

Hi Padma,
did you enable the condition download from ERP to CRM already? Did you run the initial condition customizing download and the initial condition master data download successfully (check also the application log in SLG1)?
In addition, you should be aware, that for any condition customizing change in ERP you need to rerun the initial customizing download (there is no delta download) and that you need to refresh the IPC customizing buffer, which is automatically done once a day by default.
Best Regards,
Michael

CRM Return/Complaint - Manual Condition not getting copied from ECC Invoice

Hi There,
I am creating Return/Complaint Request and referencing ECC Invoice in TRANSACTION DATA > Referenced Documents Tab..
All other condtions are getting copied except the manual fixed price and manual discount. These condtions are present in the referenced ECC Invoice. So while referencing ECC invoice all the condtions should get copied to CRM Return/Complaint Request.
Please suggest.
Thanks and Regards
Dnyanesh

HI
Dyhnayesh are you working this on CRM Service side or trying to do in other IMG?
make sure that Implement it under crm service varanties with RMA
Return Merchundise Authority when customer wants to return the good back
may be faulty one what ever is the reason , this things you have to implement it under IMG>CRM>Service> RMA Waranties
Reward with Points
Venkat

Statistical condition types not getting displayed in invoice

We have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
Thanks & regards
Puneet Agrawal

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
Reward points for useful Answers
Regards
Anji

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

Pricing: New condition type not getting listed in options in product master

Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

Hi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael

Condition tab in STO is not getting displayed

Hi,
While creating STO, the Condition tab in Line Item is not getting displayed.
Why it is not getting displayed? Where do I need to change the configuration?
Do I need to maintain any Pricing Procedure in MM?
Please guide.
Regards,
PK

Hi,
Check whether you have maintained Schema determination for respective document type and STO.
below mentioned is the navigation path to maintain the same.
> spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
Standard Pricing procedure for STO is RM2000.
Hope this is helpful..
Regards,
Vamshi

Condition types not getting displayed

i have uploaded a smartform & copied the standard program(/SMB40/FM06P) of it into my system.the condition type texts & their amounts are getting displayed for import purchase order(conditions are getting picked from me22n--->conditions) but for domestic invoice im unable to display condition type texts & their amounts.(these are picked from me22n-->invoice---->taxes).
in program lines this code exists.
<FS> like EKPO.
<KO> like KOMV.
input parameters output parameters
ZXEKKO G_KSCHL
L_NETWR G_VTEXT
<KO> G_KWERT
G_VTEXT G_FRAKWERT
G_FRAKWERT G_TAX
G_TOTAL
<FS>
G_TAX
L_KWERT
CLEAR: g_vtext,g_kwert,l_kwert.
CHECK NOT <ko>-kwert = <fs>-netwr.
Get Condition Type Text from table T685T and the value
SELECT SINGLE vtext INTO g_vtext FROM t685t
WHERE spras = sy-langu
AND kschl = <ko>-kschl.
IF sy-subrc = 0.
MOVE <ko>-kwert TO g_kwert.
ENDIF.
Check document currency
IF NOT l_netwr IS INITIAL.
WRITE g_kwert TO l_kwert CURRENCY zxekko-waers.
ENDIF.
*Determine if the discount is based on %
IF g_vtext CS '%' OR
g_vtext CS 'percentage' OR
<ko>-kschl = 'SKTO'.
<ko>-kbetr = <ko>-kbetr / 10.
MOVE '%' TO <ko>-waers.
ENDIF.
Determine Tax
IF g_vtext CS 'tax'.
ADD <ko>-kwert TO g_tax.
CLEAR g_kwert.
ENDIF.
Determine Freight Charges
IF g_vtext CS 'Freight'.
ADD: <ko>-kwert TO g_frakwert.
CLEAR g_kwert.
ENDIF.
i feel the data is coming from above code only.please suggest where i have to make changes so that it picks data from ME22N->INVOICE--->TAXES which has conditions for domestic purchase order.please help.

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
Reward points for useful Answers
Regards
Anji

Condition not getting Statistical

Similar Messages

Maybe you are looking for