Delivery Condition not getting picked up during IV

Dear All,
We are facing a problem, while posting IV thru MIRO, delivery condition(e.g. FRB1-Freight (Value)- NN) is not getting calculated automatically.
Is some customization settings missing?
Thanks in Advance,
Ritesh.

IN MIRO U select 3 rd Option Goods/ Service item + Planned Delivery cost
Then in the MIRO Freight will come
Other wise select 2nd Option in this case only Freight will come
Biswajit

Similar Messages

EXW price is not getting picked up during preference determination

HI .. all,
We have transferred Sales order from ECC to GTS. But during prreferrence determination, EXW price of the Sales order is not getting picked up.
Please suggest if any configuration is missing .
Thnks in Advance .

Hi Sapcongts,
Of course you should not modify standard SAP code, and I will not help you to do that.
I don't agree with your idea of proposed and actual EXW values. The Sales Order is your way of recording the customer's Purchase Order, and the price should be fixed at that point. The billing process should not change the agreed price of the goods - only perhaps re-calculate taxes and any other charges that could not be confirmed at the time of order.
If your standard prices are offered as FOB, then I can understand your needing to subtract some components to reach the EXW price, but in that case you will have problems transferring the correct amount to GTS. As I mentioned earlier, you can manipulate the data in the BAdI /SAPSLL/IFEX_SD0A_R3, but I had not looked closely enough at this specific requirement. Unfortunately the pricing table KONV is not provided in the BAdI and that data will not yet be available in the database. Provided the elements to be subtracted are to be read from Master Data, then you could make that same subtraction again in the BAdI. But if there are complex dependencies, it might not be easy.
Having looked in more detail at the code, I think you would be reasonably entitled to complain to SAP about missing functionality here. In the ERP system, the SD pricing provides a specific sub-total (KOMP-PREVA: subtotal 8) for Preference Value, and you can easily configure that to be filled after your subtractions. But that subtotal is not used in the GTS mapping, and I think that's a mistake. You might want to create an OSS message about it, requesting that the GTS Preference value be taken from the sub-total that was clearly designed exactly for that purpose.
In any case, good luck with the project.
Regards,
Dave

New Condition table / access not getting picked in purchase order.

I have created a new condition table for the tax to be calculated for Site / Material combination. The access sequence is also crated.
When I created the purchase order the condition / tax is not getting picked. When I checked in the analysis, I found that the error was Access not made (initalize field) for the site. The material is being picked up.
Please note that the site is getting picked from KOMK table ( I think it is a header table), while the site is actually there in the line item level in the po.
Request your help at the earliest.
Regards,
Veena.

TCODE OBQ2
Select the tax access sequence. Click on accesses. Tick the right combination required site / article . then click on the fields tab. This will take you to the next screen. There click on the field for which you want to change the selection table and then click on field catalog at the bottom of the screen.
This will take you to the field catalog screen. there select the table and field and then save.
With this procedure you can select the required field into KOMK OR KOMP.
Regards,
Veena.

Tax code not getting picked up from PO during SES

Dear Experts,
I am looking for configuration where the end user need not enter Tax code during SES. I tried a scenario where I did not maintain any service master and also did not enter any line item in service tab at item level, rather I processed my PO using limits.
Now when I prepare SES using this PO, Tax code is not getting picked up from PO and some tax code(I1) appears. Since I don't want end user to input any tax code I've left it blank.
Finally when I am doing MIRO, i am not able select the desired Tax code(say I8) as it is not available for selection. I get only one Tax code(say I1) available for selection. Even other Tax codes are not available for selection.
Please advise, how do I resolve this, why is the Tax code not getting picked up in SES? and why am I not getting other tax codes for selection in MIRO?
Thanks and Regards
Mansih

Hi,
Tax for service maintained in the service PO in the INVOICE TAB in item details. You are not going to maintain the service tax during SES. In SES you are just recognizing / confirming the vendor performed /completed the required service given to him.
During invoice tax code will flow from service PO to Invoice & you need to just select check box u201Ccalculate taxu201D & remove default tax code in MIRO, if any tax code set for default entry in MIRO. If you want your service tax code should appear in the MIRO screen then just activate in t.code:OBZT (relevant for all transaction),then you can select your service tax code during invoice verification WRT service PO.
Regards,
Biju K

Re : Condition record not getting picked

Hi All,
This is with reference to Inter-company PO.
A condition record has been maintained for MWST condition type(for key combination of Departure country -ID & Destination Country BE).But the system is not picking this condition record but it is picking the condition record maintained for MY to BE.
Could you please tell me where I need to check if a condition record is not getting picked.
Regards,
Mahesh.

Dear Mahesh
- Check your Ship To Party Country
- Ensure that the tax code you have maintained for the combination of ID -- BE
thanks
G. Lakshmipathi

Particular Perner not getting picked during simulation/ Live Run - Payroll

Hi Experts
Payroll program is not picking up a particular perner during execution when executed by payroll admin of that country . We have checked the SU53 dump and found no errors . All authorizations are in place.The payroll admin had executed the payroll for this perner last month without any issue.No org / master data changes made in last 2 month. The perner is not getting picked up in simulation and live mode. Please advice
Regards
Sriram

Dear Sriram,
Check infotype 0003 for the particular employee.
Find Weather the employee is locked.If locked do the deselection and run the payroll.
Regards,
Sairam.

GL Account is not getting picked by billing document

Hi Gurus,
one new GL account is set up by our FI team for a accrual condition type.
case 1:
Now when i have cancelled the previous created billing doc and trying to create again then the new GL account is not getting picked.
case 2:
Whereas when am doing the complete process flow like sales order creation, delivery and billing then the new GL account is getting picked.
Could you please let me know what would be the reason for this, why its not getting picked in first case.
Thanks,
Ashi

Hello Preety,
Unless you see the Revenue Account Determination Analysis for the Billing document, it is very difficult to understand the reason. Please click on the Environment >> Acc.Determination Analysis >> Revenue account in the VF03 screen and find the missing assignment.
Thanks,
Suman$

Billing pricing not getting picked up

I created a sales invoice with reference a sales order. In the sales order the price was getting picked up and was displayed.
Delivery was also created. But when the invoice was created and saved the net value is shown as 0. Price is not getting picked up.
The option which many other consultants has given was to cancel the invoice and re create a new invoice. But we want the price to be picked in the same invoice.
This happened only for 5 invoices which was created on a particular day. These 5 inovices show a net value of 0.
Could you please help me out to resolve this issue.
Thanks very much.

Hi,
Please check if the document pricing procedure is same for Order type and billing type.
If its not same please check what is the pricing procedure system taking for Billing document procedure.
In that pricing procedure check what is the Base price condition type.
Check whether condition records maintained for that condition type.
Iff no records maintain then use VK11 to create new condition records.
Then go to Item data - Conditions in billing document press Update button and use B-Carry out new pricing.
Revert if you need more elaborate explanation.
Best Regards,

Delivery document not getting updated

Dear Experts,
Till date our client was using VL04 for creating DA for only domestic sales, now they
are asking to provide facility to created DA for export shipment in VL04 and we have done customization for the same.
Now there are two separate (delivery document number) number ranges generated for
domestic and export sales.
Now my problem is : delivery document number generated for export sales is not getting
updated in database table VTRDI
Have any idea ??
Please advice
R.Karthik
Edited by: Karthik R on Sep 30, 2009 5:31 PM
Edited by: Karthik R on Sep 30, 2009 6:39 PM

Hi Lakshmipathi ,
Thank you so much.....for ur valuable advice !!
I have checked the table LIKP and LIPS ...and the export delivery number is getting saved
in these two tables...
But my problem is with creating shipment in VT01...as delivery number generated for export is not
getting picked in VT01 but for normal domestic orders it is getting picked.
I could not figure out where I went wrong??
could you please guide me on this issue.
R.Karthik
Edited by: Karthik R on Oct 5, 2009 8:46 AM

Delivery document not being picked while creating shipment document

Dear All,
Issue is regarding creation of shipment document.
As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
I have created a sales order, picking is completed n saved, PGI not yet been done.
Am unable to create a shipment document due to delivery document not being picked.
i/p's will be of great help.
with regards,
Vijayashree

Dear all,
The issue is solved.
As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
Route determination setting was not correct.
Regards,
Vijayashree

Output Message Type MAHN not getting picked up in PO

Hello Experts
   I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
Any help is appreciated.
Thanks
Ankit

Hello Tej
I have maintained output device but same result.
Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
Steps for new Message Type for PO Reminder (ZMAH)
1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                    (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
2.     Defined new access sequence Z515 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 1
Table = 026
Description = Purchasing Output Determination: Document Type
Requirement = 103
Exclusive = Yes (box checked)
Access Sequence Number = 2
Table = 027
Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
Requirement = 103
Exclusive = Yes (box checked)
3.     Maintain Output Type ZMAH for PO
General Data
Access Sequence = Z515
Access to condition (Checked)
Multiple Issuing (Checked)
Change Output
Program = SAPFM06P
FORM Routine = ENTRY_NEU
Replacement of Text Symbol
Program = SAPMM06E
FORM Routine = TEXT_SYMBOL_REPLACE
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = External Send
Communication Strategy = 0001 (E-mail Document)
Processing Routines
Transmission Medium = 5 (External Send)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = MEDRUCK
Partner Roles
Medium = External Send
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 3
CType = ZMAH
Name = Output for Reminder
Short Text = Urging letter (expediter)/reminder
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1 (Purchase Order)
Step = 101
Cntr = 3
CTyp = ZMAH
Description = Output for Reminder
Requirement = 103
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZMAH
Med = 5 (External Send)
Funct = VN
Name = Output for Reminder
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Vendor = 101281
Partner Funct = VN
Medium = 5 (External Send)
Date/Time = 4 Send immediately (when saving application)
Output Device = LP01
Cover Page Text = Reminder PO number &EKKO-EBELN&
Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
Thanks
Ankit

Items not getting picked up in Return sales order

Dear all,
I am creating a return sales order with reference to a sales order.
In my delivery doc the items can be categorised into 3 types:
1- Picking done; Movement type determined
2- Picking done; Movement type not determined
3- Picking not-done; Movement type determined
In the return order, only the items of 1st type are coming. Why others not getting picked up? Can they be entered manually?
regards
Sapshed

Dear Hrishikesh,
Thats Ok. Picking is done only for those items for which Relevant for Picking is ticked.
What I want to know is that, for items that have either their picking not done or Goods movement not determined, they are not getting automatically picked up while I create a Return order w/r to a sales order.
thanks
Sapshed

Force index not getting picked up while running the SQL Query

Hi All,
We are facing an issue with one SQL Query. We have created a custom Index and we are using that index in our query by using the following syntax:
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
Where
ol – Table Alias Name
XXEXH_ORDER_LINES_N2 – Index Name
But still the index is not getting picked up in the Explain Plan.
If any one of you have faced a similar issue then please let us know how you had resolved it.
Appreciate your help.
DB version:10.2.0.4
Apps version: 11.5.10.2.0
Thanks.

The query and plan are given as:
SELECT
/*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
ol.header_id,
ol.line_id,
ol.line_type_id,
ol.flow_status_code,
ol.last_update_date,
ol.inventory_item_id,
ol.ship_from_org_id,
oh.order_number,
ttv.NAME,
msib.segment1,
msib.item_type,
fl.segment1 || '-' || fl.segment2 || '-' || fl.segment3 || '-' || fl.segment4 current_loc,
ship_to.country
|| '-'
|| NVL (ship_to.state, ship_to.province)
|| '-'
|| DECODE (ship_to.county,
NULL, ship_to.city,
ship_to.county
|| DECODE (ship_to.country,
NULL, NULL,
'-' || ship_to.city
) new_loc,
mmt.transaction_type_id,
mtt.transaction_type_name,
DECODE (mil.segment1,
UPPER ('Field%'), 'PLEASE VALIDATE FIELD LOCATION',
hou.country
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.region_2
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.region_1
|| '-'
|| DECODE (mil.segment1,
UPPER ('Field%'), NULL,
hou.town_or_city
) rma_loc,
ship_su.attribute1 oper_loc,
msib.organization_id --SC#5878
,fa.asset_number --SC#5878
,fdh.code_combination_id --SC#5878
,fa.asset_id parent_asset_id
FROM fnd_flex_values_vl ffvv,
fnd_flex_value_sets ffvs,
mtl_item_locations mil,
--hr_organization_units_v hou,
hr_organization_units o,
-- hr_lookups l,
-- hr_lookups l2,
hr_locations hou,
hr_locations_all_tl lot,
mtl_transaction_types mtt,
mtl_material_transactions mmt,
hz_locations ship_to,
hz_cust_acct_sites ship_cas,
hz_cust_site_uses ship_su,
hz_party_sites ship_ps,
fa_distribution_history fdh,
fa_locations fl,
fa_additions fa,
mtl_system_items_b msib,
oe_transaction_types_tl ttv,
oe_order_headers oh,
oe_order_lines ol
WHERE ol.org_id = TO_NUMBER (fnd_profile.VALUE ('ORG_ID')) --SC#5878
AND ol.flow_status_code = 'CLOSED'
AND TRUNC(ol.last_update_date) BETWEEN '01-SEP-2010' AND '31-OCT-2010'
AND ol.header_id = oh.header_id
AND ol.line_type_id = ttv.transaction_type_id
AND ol.inventory_item_id = msib.inventory_item_id
AND ol.ship_from_org_id = msib.organization_id
AND msib.item_type = 'REN'
AND SUBSTR(fa.asset_number,1,DECODE(INSTR(fa.asset_number,'-'),0,LENGTH(fa.asset_number),INSTR(fa.asset_number,'-')-1)) = msib.segment1 -- SC#11824 / added for fetching all assets with any suffix/ on 20-JUL-2011 by MPRAKAS
AND fdh.asset_id(+) = fa.asset_id
AND fdh.location_id = fl.location_id(+)
AND fdh.date_ineffective IS NULL
AND ol.ship_to_org_id = ship_su.site_use_id
AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_ps.location_id = ship_to.location_id
AND mmt.inventory_item_id = ol.inventory_item_id --added new condition
AND mmt.organization_id = ol.ship_from_org_id --added new condition
AND mmt.trx_source_line_id = ol.line_id
AND mmt.transaction_quantity > 0
AND mmt.transaction_type_id = mtt.transaction_type_id(+)
AND mtt.transaction_type_name(+) = 'RMA Receipt'
AND o.organization_id(+) = mmt.organization_id
AND mil.inventory_location_id(+) = mmt.locator_id
AND ffvs.flex_value_set_name = 'HCCA_AFF_LOCATION' --added new condition
AND ffvv.flex_value_set_id = ffvs.flex_value_set_id(+)
AND ffvv.flex_value(+) = ship_su.attribute1
AND ttv.LANGUAGE = 'US'
AND (ol.ordered_item_id IS NULL OR ol.ordered_item_id > 0)
AND NVL (ol.ship_to_org_id, 1) > 0
AND NVL (hou.location_id, 1) > 0
AND o.location_id = hou.location_id(+)
AND NVL (hou.business_group_id, NVL (hr_general.get_business_group_id, -99)) = NVL (hr_general.get_business_group_id, -99)
AND hou.location_id = lot.location_id
AND lot.LANGUAGE = USERENV ('LANG')
AND (fa.asset_id = fa.parent_asset_id OR fa.parent_asset_id IS NULL)
Plan
SELECT STATEMENT ALL_ROWSCost: 4,065 Bytes: 958 Cardinality: 2
     125 CONCATENATION
          62 NESTED LOOPS OUTER Cost: 3,140 Bytes: 479 Cardinality: 1
               59 FILTER
                    58 NESTED LOOPS OUTER Cost: 3,139 Bytes: 441 Cardinality: 1
                         55 NESTED LOOPS Cost: 3,131 Bytes: 420 Cardinality: 1
                              52 NESTED LOOPS OUTER Cost: 3,130 Bytes: 390 Cardinality: 1
                                   49 NESTED LOOPS OUTER Cost: 3,128 Bytes: 377 Cardinality: 1
                                        46 NESTED LOOPS Cost: 3,127 Bytes: 351 Cardinality: 1
                                             44 HASH JOIN Cost: 3,126 Bytes: 342 Cardinality: 1
                                                  42 NESTED LOOPS Cost: 2,443 Bytes: 324 Cardinality: 1
                                                       40 NESTED LOOPS Cost: 2,443 Bytes: 315 Cardinality: 1
                                                            38 NESTED LOOPS Cost: 2,443 Bytes: 306 Cardinality: 1
                                                                 36 NESTED LOOPS Cost: 2,443 Bytes: 298 Cardinality: 1
                                                                      33 NESTED LOOPS Cost: 2,442 Bytes: 268 Cardinality: 1
                                                                           31 NESTED LOOPS Cost: 2,441 Bytes: 259 Cardinality: 1
                                                                                28 NESTED LOOPS Cost: 2,438 Bytes: 238 Cardinality: 1
                                                                                     25 NESTED LOOPS Cost: 2,437 Bytes: 207 Cardinality: 1
                                                                                          22 NESTED LOOPS Cost: 2,436 Bytes: 194 Cardinality: 1
                                                                                               19 NESTED LOOPS Cost: 2,435 Bytes: 184 Cardinality: 1
                                                                                                    16 NESTED LOOPS Cost: 2,433 Bytes: 168 Cardinality: 1
                                                                                                         13 NESTED LOOPS Cost: 2,432 Bytes: 154 Cardinality: 1
                                                                                                              10 NESTED LOOPS Cost: 2,430 Bytes: 126 Cardinality: 1
                                                                                                                   7 NESTED LOOPS Cost: 2,427 Bytes: 102 Cardinality: 1
                                                                                                                        4 NESTED LOOPS Cost: 779 Bytes: 34,028 Cardinality: 724
                                                                                                                             2 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1
                                                                                                                                  1 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
                                                                                                                             3 TABLE ACCESS FULL TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 777 Bytes: 13,756 Cardinality: 724
                                                                                                                        6 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 3 Bytes: 55 Cardinality: 1
                                                                                                                             5 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 1
                                                                                                                   9 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1
                                                                                                                        8 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1
                                                                                                              12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1
                                                                                                                   11 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
                                                                                                         15 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1
                                                                                                              14 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1
                                                                                                    18 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1
                                                                                                         17 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1
                                                                                               21 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1
                                                                                                    20 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1
                                                                                          24 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 13 Cardinality: 1
                                                                                               23 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
                                                                                     27 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1
                                                                                          26 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1
                                                                                30 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 3 Bytes: 21 Cardinality: 1
                                                                                     29 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N1 Cost: 2 Cardinality: 1
                                                                           32 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                                                                      35 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_LOCATIONS_ALL Cost: 1 Bytes: 30 Cardinality: 1
                                                                           34 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_PK Cost: 0 Cardinality: 1
                                                                 37 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1
                                                            39 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                       41 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                  43 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263
                                             45 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                                        48 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1
                                             47 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1
                                   51 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1
                                        50 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1
                              54 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1
                                   53 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1
                         57 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6
                              56 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6
               61 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1
                    60 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1
          124 NESTED LOOPS OUTER Cost: 925 Bytes: 479 Cardinality: 1
               121 FILTER
                    120 NESTED LOOPS OUTER Cost: 924 Bytes: 441 Cardinality: 1
                         117 NESTED LOOPS Cost: 916 Bytes: 420 Cardinality: 1
                              115 HASH JOIN Cost: 915 Bytes: 411 Cardinality: 1
                                   113 NESTED LOOPS OUTER Cost: 231 Bytes: 393 Cardinality: 1
                                        110 NESTED LOOPS OUTER Cost: 229 Bytes: 380 Cardinality: 1
                                             107 NESTED LOOPS Cost: 228 Bytes: 354 Cardinality: 1
                                                  104 NESTED LOOPS Cost: 225 Bytes: 330 Cardinality: 1
                                                       102 NESTED LOOPS Cost: 224 Bytes: 321 Cardinality: 1
                                                            99 NESTED LOOPS Cost: 222 Bytes: 293 Cardinality: 1
                                                                 96 NESTED LOOPS Cost: 221 Bytes: 263 Cardinality: 1
                                                                      93 NESTED LOOPS Cost: 220 Bytes: 253 Cardinality: 1
                                                                           90 NESTED LOOPS Cost: 218 Bytes: 237 Cardinality: 1
                                                                                87 NESTED LOOPS Cost: 217 Bytes: 223 Cardinality: 1
                                                                                     84 NESTED LOOPS Cost: 216 Bytes: 192 Cardinality: 1
                                                                                          81 NESTED LOOPS Cost: 210 Bytes: 137 Cardinality: 1
                                                                                               78 NESTED LOOPS Cost: 28 Bytes: 118 Cardinality: 1
                                                                                                    75 NESTED LOOPS Cost: 22 Bytes: 97 Cardinality: 1
                                                                                                         73 NESTED LOOPS Cost: 22 Bytes: 88 Cardinality: 1
                                                                                                              71 NESTED LOOPS Cost: 22 Bytes: 79 Cardinality: 1
                                                                                                                   69 NESTED LOOPS Cost: 22 Bytes: 71 Cardinality: 1
                                                                                                                        66 NESTED LOOPS Cost: 19 Bytes: 58 Cardinality: 1
                                                                                                                             64 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1
                                                                                                                                  63 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
                                                                                                                             65 TABLE ACCESS FULL TABLE HR.HR_LOCATIONS_ALL Cost: 17 Bytes: 30 Cardinality: 1
                                                                                                                        68 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 3 Bytes: 13 Cardinality: 1
                                                                                                                             67 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_UNITS_FK3 Cost: 1 Cardinality: 5
                                                                                                                   70 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1
                                                                                                              72 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                                                                         74 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1
                                                                                                    77 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 6 Bytes: 2,667 Cardinality: 127
                                                                                                         76 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N2 Cost: 2 Cardinality: 127
                                                                                               80 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 182 Bytes: 19 Cardinality: 1
                                                                                                    79 INDEX RANGE SCAN INDEX APPS.HCCA_HZ_CUST_SITE_USES_ALL_N1 Cost: 1 Cardinality: 489
                                                                                          83 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 6 Bytes: 55 Cardinality: 1
                                                                                               82 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 4
                                                                                     86 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1
                                                                                          85 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1
                                                                                89 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1
                                                                                     88 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1
                                                                           92 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1
                                                                                91 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1
                                                                      95 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1
                                                                           94 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1
                                                                 98 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1
                                                                      97 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1
                                                            101 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1
                                                                 100 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
                                                       103 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                                                  106 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1
                                                       105 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1
                                             109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1
                                                  108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1
                                        112 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1
                                             111 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1
                                   114 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263
                              116 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1
                         119 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6
                              118 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6
               123 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1
                    122 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1

CST is not getting picked up in sales order

Dear Experts,
We are following TAXINN procedure and we have maintained condition record for excise condition type - JEXP, JECS & JA1X and tax condition types - JIVC and JIVP. But in sales order, Excise condition types and Vat is getting picked automatically for local customer. But if I chose a CST customer CST is not getting picked automatically even though I have maintained condition record for the same. I have told my client to use alternative tax classification but my client doesnt want to follow this procedure.
Kindly let me know, how can I make the CST to be picked automatically in sales order.
Thanks & Regards,
Reji S

Dear Reji,
These may be the possible areas for the issue.
1.Check the ship to party Tax classification in the customer master>Sales area data>billing tab.
2.Check the Tax classification of the material master-->Sales org data view.
3.Check the region of the ship to party.
I hope this will help you,
Regards,
Murali.

Release Strategy for Contract is not getting picked whereas it is ok for PO

Dear Experts,
I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
Kindly resolve the issue.
Satish

S0004830404 wrote:
Dear Experts,
>
> I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
> I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
>
> Kindly resolve the issue.
>
> Satish
hi,
use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
Thanking you

Delivery Condition not getting picked up during IV

Similar Messages

Maybe you are looking for