Statistical condition types not getting displayed in invoice

We have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
Thanks & regards
Puneet Agrawal

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

Condition types not getting displayed

i have uploaded a smartform & copied the standard program(/SMB40/FM06P) of it into my system.the condition type texts & their amounts are getting displayed for import purchase order(conditions are getting picked from me22n--->conditions) but for domestic invoice im unable to display condition type texts & their amounts.(these are picked from me22n-->invoice---->taxes).
in program lines this code exists.
<FS>   like EKPO.
<KO> like KOMV.
input parameters            output parameters
ZXEKKO                        G_KSCHL
L_NETWR                      G_VTEXT
<KO>                             G_KWERT
G_VTEXT                        G_FRAKWERT
G_FRAKWERT               G_TAX
G_TOTAL
<FS>
G_TAX
L_KWERT
CLEAR: g_vtext,g_kwert,l_kwert.
CHECK NOT <ko>-kwert = <fs>-netwr.
Get Condition Type Text from table T685T and the value
SELECT SINGLE vtext INTO g_vtext FROM t685t
WHERE spras = sy-langu
AND kschl = <ko>-kschl.
IF sy-subrc = 0.
MOVE <ko>-kwert TO g_kwert.
ENDIF.
Check document currency
IF NOT l_netwr IS INITIAL.
WRITE g_kwert TO l_kwert CURRENCY zxekko-waers.
ENDIF.
*Determine if the discount is based on %
IF g_vtext CS '%' OR
g_vtext CS 'percentage' OR
<ko>-kschl = 'SKTO'.
<ko>-kbetr = <ko>-kbetr / 10.
MOVE '%' TO <ko>-waers.
ENDIF.
Determine Tax
IF g_vtext CS 'tax'.
ADD <ko>-kwert TO g_tax.
CLEAR g_kwert.
ENDIF.
Determine Freight Charges
IF g_vtext CS 'Freight'.
ADD: <ko>-kwert TO g_frakwert.
CLEAR g_kwert.
ENDIF.
i feel the data is coming from above code only.please suggest where i have to make changes so that it picks data from ME22N->INVOICE--->TAXES which has conditions for domestic purchase order.please help.

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

VPRS condition type not getting computed while retro billing.

Dear All,
I have an issue while generation of Reto billing using the T.Code : VFRB.While running VFRB the values are getting computed correctly and the supplimentary debit / credit note gets created.
But the values for the condition type VPRS is not getting computed and getting transfered to CO-PA.
On pricing analysis agaist VPRS i am getting the message (Condition ignored (requirement 004 not fulfilled)).
The Item category used is TAN and the Determine cost Indicator is marked.Also while doing a sales invoice the VPRS condition type is getting computed and the value is posted in CO - PA.
What would be the reason for the error .Could some one suggest a solution .Kindlye help.
Regards,
K.Vivek

Hello vivek,
this is usually caused by userexit. Please check userexit_pricing_prepare_tkomp userexit_number_range using in rv60afzz.
Best regards,
Ivano.

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

NAVM condition type not getting updated in PO with account assignment K

Hi Sap Gurus
Pls help me resolving this issue
We had created a PO (K-Acc Assignment) with certain tax percentage (16%) in the past .When we view the PO in display mode we can see the equivalent value of 16% being appearing in NAVM at item level.Further on when we hit the Invoice TAB and try to view the taxes.We can see the net price being updated in BASB condition type,and the equivalent value of 16% being updated in AP1I.
This looks to be perfect but when we again go back to he same PO screen from Tax Screen the value that had intially appeared in NAVM(equivalent of 16 tax%) becomes zero.This happens so for the old PO.
But for new PO nothing is appearing in NAVM condition tab in PO item level,inspite of the fact that some tax percentage has been maintained.Again this tax percentage can be viewed from Invoice TAB and it takes part in the calcualtion updating th AP!I key mentioned earlier.SOme changes have been made in the config due to which all new POs being created now as no value being updated in NAVM tab inspite of maintaining the tax percentage.
All other std settings have been used.
Additional info:
In the pricing procedure from FICO side..for the condition type AP1I accrual key NAV is used.
It has the access seq MWST.
cond class,claculatio type,cond category for AP1I being: Taxes,percentage,Tax respectively
AP1I is not marked as statistical.
NAVM has no acess seq.
cond class,claculatio type,cond category for AP1I being: Taxes,Fixed amount,Input Tax not deductible(N) respectively.
NAVM is marked as statistcal
pls give me some leads so as to identify why the value does not appear in NAVM condition type

system wont generate any controlling document for noted items downpayment and normal payments.
Because all are balance sheet accounts. Controlling documents will generated for only P&L accounts.
Your analysis correct.

Invoice output Condition type not populated for many invoice documents

Hi Guru's
Invoice Out put Condition type for printing not populated in the invoice document. Now We need to insert condition type for many documents to print at a time. We can manually place condition type at document header level individually for every document. But we have many documents to print.
plz advice me how to print all these documents
Thanks in advance.
Regards,
Ravikanth

Hi Ravi
Just take help from your ABAP team. Record the event in SHDB ask then to get invoice number from excel file and loop the program.
This will be more faster then LSMW.
I am giving you BDC code
report ZBILVF02
       no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV60A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBRK-VBELN'
                              '90010310'.
perform bdc_dynpro      using 'SAPMV60A' '0104'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-FKART'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_transaction using 'VF02'.
perform close_group.
Regards
Vijay

Pricing: New condition type not getting listed in options in product master

Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

Hi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael

Condition type not getting populated at first line item of Sales order

Hi Experts,
We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
Let us know there are any other possible ways to find the same
please help.
Thanks!

Hi Rajani,
check the user exit in the FM..IDOC_INPUT_ORDERS
check if any filters kept for condition type field..
check the belwo user eixuts
ORDCHG I VEDB0001 Sales Ord. Change
ORDERS I VEDA0001 Sales Orders..
Regards,
Prabhudas

VPRS condition type not to display

Hi all
I have condition type VPRS in my pricing procedure but my client wants it should not be display to the all user while creating sale order. Is there any way.
Kindly replay urgently.
Vinod

Hi Vinod,
Specific condition types can be hidden on pricing screens; we did the same for VPRS condition type.
In include LV69AFZZ there is a user exit - USEREXIT_FIELD_MODIFICATION; here you need to add code as follows.
if <whatever conditions in which you want to hide it>
CASE SCREEN-NAME.
WHEN 'KOMV-KBETR'.
IF KOMV-KSCHL = 'VPRS'.
SCREEN-ACTIVE = 0.
ENDIF.
WHEN 'KOMV-KWERT'.
IF KOMV-KSCHL = 'VPRS'.
SCREEN-ACTIVE = 0.
ENDIF.
WHEN 'KOMV-KWERT_K'.
IF KOMV-KSCHL = 'VPRS'.
SCREEN-ACTIVE = 0.
ENDIF.
ENDCASE.
ENDIF (for conditions in which the field has to be hidden)
However we found that this happened only at item level; header still showed the condition type. Smart users can proportionately allocate the header condition amount to arrive upon the item level values. But you may investigate along these lins to determine if it is possible at header too.
Please reward with points if useful.
Cheers,
KC
SAP SD

ORDERS Inbound EDI1 Condition type not getting updated

Hi Experts,
As per the client requirement, during ORDERS Inbound process we need to capture the "Customer expected Price" in EDI1 Condition type in the sales order. So we maintained the details in the E1EDP01 in field VPREI.
But during ORDERS Inbound process this EDI1 field is not getting updated. Can anyone please help us on this.
Warm Regards,
VEL

Problem of our ABAP coding distrubed the std functionality. In std SAP, this functionality will work without any issue.

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

Statistic Condition Type inactive when duplicated

Hi gurus,
I wonder if there's any way to make a statistic condition type become inactive when the user inserts another equal one.
Example:
Here is my procedure: ZP0001 with this condition type ZC01 set statistic.
If I create a new sales order and I insert this condition in the procedure twice, the system does NOT deactivate any of them. It just let them occur at the same time.
If I go like this with a non statistic condition type, then the system deactivate all duplicated types and only remains the last one inserted.
Do you know if this behaviour is possible for statistic condition types in any way?
Thanks in advance,
John

Hi,
a statistical condition type can not be inactive because it is not taken into account in the calculation per definition as statistical.
One more sentence to clarify to the sentence before. It will be inactive but still displayed - as this is the nature of a statistical condition.
So far so good. But I know exactly what your problem is, when your statistical condition type is present twice you would like to surpress the earlier record.
We had a similar requirment once. We had two different statistical condition types which were displayed at the same time.
The requirement was to only display one of the two condition types. When A was present B should not be shown. I tried with condition exclusion but it did not work for statsitical conditions (as they can not be set inactive...). But it worked very good with a pricing requirement we created ourselves.
Good Luck.

Condition type not determined

Hello All,
I am using COPY CONTROL to create contract through VA41.
Problem i am facing is condition type not getting picked up at item level, though correct pricing procedure is getting determined. In that pricing procedure this condtion type is maintained but still it is not picking the condition type.
Rushikesh

Hi,
Can you check condition type detailed screen"Manual entries" field,the value in that field is either B or D.
Regards,
Chandra

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

Statistical condition types not getting displayed in invoice

Similar Messages

Maybe you are looking for