Condition records in ERP sales order still there after deletion

Hello,
I have maintained all the settings needed for lean order (creating ERP sales order from crm opportunity in CRM webui).
Now when i create a ERP sales order in CRM using LORD, there are certain condition values determined correctly (note that they are variant based condition values).
However depending upon the sales scenario, certain conditions are to be deleted from pricing details at item level. So, far no issue.
After I save this ERP sales order, and go to see it in our ERP system, i find that those condition values are still there !
I am unable to understand why this is happening.
Please help me.
Regards

Hi,
Thanks for your reply, for your question "One more point confirm with you, you create sale order in CRM as a CRM order ( type LORD), and the order will transfer to ERP by CRM middleware, right?" , the answer is no i dont create a CRM order, however i create an ERP order in crm webclient. This feature of CRM 7.0 is explained in following documentation:
http://help.sap.com/saphelp_crm70/helpdata/en/17/99fb62928c46c28c10f3ebc52fdfa8/frameset.htm (then navigate to Entry of ERP Sales Transactions in SAP CRM)
As you also asked me to change the settings of condition type as manual input, which cannot be done because this will affect our business process to large extent, and my users will not accept it, hope you understand my situation
Please let me know if you can help me in some other way, or you want me to check some more settings.
Regards
Edited by: ar_on_crm on Jan 6, 2011 11:03 AM

Similar Messages

Free goods condition records - Usage in Sales Order

HI,
I have so many condition records in various KOTN9xx tables, which are for issuing free goods. If I see a sales order item, that is a free good, how do I know, on what basis (based on which condition record, in which condition table) that free good was issued?
Technically speaking: Similar to KONV table for storing transaction data on pricing, is there a table for storing transaction data on free goods?
Thanks,
Juwin

Find the table number of the key combination of customer / material . & you can extract free goods condition records from this table.
Search in SE11 with the table number.

Different Tax condition records picked on sales order and invoice

Dear Expert,
I have a scenario where the goods supply from plant to different country sales organization customer. it is a n export order.
. sales order has been processed with ship to address in Portugal. We did enter end user VATnumber on the ship to customer. When you look under conditions the MWST is 0.00 which means VAT will not be invoiced.
while creating the order MWST condition calculated correctly by using the export access sequence, but when creating the invoice w r t sales order i am getting the domestic tax access sequence record.
in my case it is wrong, the same sales order MWST condition amount needs to be copied to invoice as well.
after going to condition tab of that billing document, select MWST and click on "Condition Record" I found below different values in sd order conditions and invoice conditions:
invoice:
SD-Order:
Can you kindly help me on this? :-)
Regards,
Yashar

Ideally, you should have a different pricing procedure for domestic and exports and I am not sure, why you have not created one more pricing procedure for exports.
Coming to your query, it seems, the issue is VAT registration number in which case, have a look at the following notes:-
Note 371764 - VAT registration number: Destination country
Note 15244 - Incorrect VAT amount is displayed
Note 148505 - VAT registrtn.no.fr.ship-to & n.fr.sold-to party
G. Lakshmipathi

Flow of condition records in the sale order

Dear All,
I had created two condition types (ex : RL1 & RL2) for Royalty exp and Royalty Payable, these are Required Fields. so that whenever user create the Sale order those condition types amounts are automatically fetch into the sale Order with plant and material combination through condition record.
                                    But the requirement is user will maintain condition record for the first condition type (ex : RL1) only, at the time of creating the Sale order the second condition type(RL2) amount should automatically flow into the sale order along with the first condition record (RL1). i.e., what ever the amount maintained in the first condition record(RL1) should copy into the second condition type(RL2).
Note : User will not maintain condition record for the Condition type (RL2).
                             Other than Condition supplement, Please suggest me how to meet the Client requirement.
Awaiting Reply,
Thanks&Regards,
Lakshmi

Hi,
First Condition Type (RL1) is a surcharge and   Condition type (RL2) is discount. after placing RL1 condition in RL2 condition element details screen as a Ref.Condition Type. I maintained the condition record for RL1, in the Sales order second condition Type is automatically picking with positive value(where as second condition RL2 is a discount) that should not it has to show the negative value .
Give me suggestions to meet the requirement.
Regards,
Lakshmi narayana

Web gallery album is still there after deleting it in Aperture 2.1

I deleted a web gallery album in Aperture because I had Stacks turned on and not all images loaded, but the album is still on the web gallery site and I can't figure out how to delete it from there. Any help?
Thanks,
Mike T.

In the Finder Choose: Go>>idisk>my idisk
navigate to the _gallery folder inside the Sites folder then trash the gallery that you wish to delete.
DLS

Search protect icon in system tray (still there after deleting)

Hello i got infected with search protect (conduit). In my firefox, IE and Chrome browser my startpage got changed to mystartsearch or something like that.
I changed the startpages and deleted installed programs by the normal windows add and remove programmes tool in the configuration screen. I ran kaspersky.
Everything was cleaned it seemed besides 2 things. When i clicked new tab in firefox the mystartsearch page started in that tab. I solved this bij intalling a firefox tab add on. Than i changed the page that had to open when opening a new tab.
Another problem is a blue e icon in my system tray that i can't get away. It is started when my computer starts up. I can't click it, nothing happens. When i move with my mouse over it, "search protect, click to configure" is shown.
I disabeld programs in my startup configuration. I searched fot this program, but i can 't find anything than seems to be related to search protect. I searched for removal assistance on the internet but i can only find A to Z procedures, which are useless. The program already seems to be deleted from my computer but the icon keeps starting up on my computer.
Can somebody help? Do i have to reinstall search protect to delete it properly? And where can i find a "harmless" version of this program? It is a bit sick to reinstall an infected programm to redelete it. I prefer other solutions, but that icon on startup is irritating me and i wonder if it is still harming my computer.

You already uninstalled Search Protect from the Windows Control Panel, Uninstall a Program? Could you check again for anything strange. After the list loads, I suggest clicking the "Installed on" column heading to group items by install date. This can help surface innocently named bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
Regarding the new tab page, you shouldn't need an add-on to regain control.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may still have SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your other extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" Firefox button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to MyStart:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

How to manual maintain TAX condition value while creating sales order

Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank you

Hi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help.

No condition update from the sales orders exist - VK322 Message

Hello All,
I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly ) but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
VK322 -
No condition update from the sales orders exist
Message no. VK322
Diagnosis
The following causes are possible:
1. There are no sales orders for the condition record that you selected.
2. Updating condition records in the sales order entry is not active.
Procedure
Concerning 1:
Check the sales orders created for the condition record that you selected.
Concerning 2:
Activate the updating for condition records in the sales order entry.
I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
My requirement > To be able to see the cumulative values from condition record.
Also, in which table the accumulated values get stored?
Appreciate your expert advise on this issue.
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

Hello Everyone,
I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
3. Activation of ' S071' info structure via OM01
4. Condition record maintenance as per the required scales.
4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
5. Put this routine in ' Scale Formula' in V/06.
This is giving me the perfect results for the correct application of the discount.
Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
Thanks a lot friends for all your advice...
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

How to update cost related condition type amount in sales order without disturbing other condition types.

Hi ,
How to updae only one item condition ZYV0 value in sales order. If I can see we have several options from pricing type to update condition types but here My requirement is to update only one condition amount .If I can see other pticing types they will update all condition types .
-Exclusive option is checked for all the tables maintained in access sequence,
Below options were not worked for me.
-In condition type ----> Condition category has been updated with "D"(Tax) pricing type-"G" to update in sales order
- This option worked for me but condition category "F"(frieght) and pricing type -H but in conditions tab when I update two condition amounts are activated for one condition type like below.
ZYV0--30 % (old condition record value updated in sales order)
ZYV0- 50% (updated condition record)
Regards

Hi Rita,
Tried with condition category "u" and updated with pricing type "U" . It works as same I used old logic.
with condition categories "D" and "F" it will update old and new condition record values in sales order.
ZYV0--30 % (old condition record value updated in sales order)
ZYV0- 50% (updated condition record)
I have updated here existing condition record value from 30 % to 50 % validity periods are not changed.
Regards

Do we need IPC in CRM B2B Webshop for creation of ERP Sales order

Hi Experts,
can you pls guide in following scenario in CRM 7.0
We are using CRM B2B WEBSHOP, We are creating ERP SALES ORDER .
We have requirement to display price break up like base price, different discounts, taxes, freights while creation of Sales order on the webshop.
I would like to understand,
1) whether we need IPC to show price breakup in SALES ORDER in CRM WEBSHOP.
2) if yes, do we need enhancement at IPC to display complex discount types on webshop ?
3) do we need to download entire pricing ( customizing +condition records ) from backend ECC to CRM.
If anybody has worked on similer scenario ,requesting to help.
Any points , documents ,step by step guide will be highly appreciated.
thanks in advance,
regards,
PD

Hi,
ipc is inbuilt in Kernel to CRM 7.0
BR,
Darshan

Interaction Center Sales with ERP Sales Order

We are in the process of upgrading from CRM 4.0 sp 6 to CRM 2007. We have been using the Web IC and Mobile sales for the last 4 years. In our original CRM 4.0 implementation (which was developed by SAP) we were using the CRM Web IC to create orders with R/3 using a couple of BADI's. We are currently using R/3 4.7 and have plans to upgrade to ECC 6.0 next year. I was just rereading some of the documentation in the upgrade guide and came across the following line:
"The following software units are required for the Interaction Center Sales with ERP Sales Order scenario:
Mandatory: IC WebClient with specific ERP Sales order viewset requires SAP ECC 6.0"
This implies that the standard Interaction Center Sales with ERP Sales Order functionality will not work in our current landscape and that it would only do so when we upgrade to ECC. What options are open to us to get around this? What is the technical reason why this functionality doesn't work with SAP R/3 4.7?
I can't imagine we are the first company to face this problem and I can't imagine everyone upgraded to ECC 6 - so what approaches have people taken to address this issue
Thanks in advance
Eddie

In the last 12 months we upgraded from 4.0 to 5.0 in CRM and went form 46C to ECC 6.0.
In your current landscape you can create orders in the ICWC where the order is created in CRM and replicates to R/3 4.7. You have the replication scenarios X, Y, Z available to you.
Your other option is using the ICWC R/3 order screen where you basically are calling R/3 transaction VA01 and entering the order in the ICWC but the order entry in being done directly into R/3 via your ITS server. Looks almost exactly like VA01 in the gui. The menu bars are a little different.
The ERP order looks like other ICWC screens, is very sharp and users wouldn't know that they are entering the order directly in ECC. We have been using it about 3 months. More Pro's than Con's, if you have user exits in MV45AFZ* the ERP order still uses them (but t-code isn't VA01 if you have condition If statements around t-codes).
Hope this helps,

Show ERP Sales order adn ERP Quotes in Interaction History

Hi ,
I have a requirement to be able to search for the ERP sales orders and ERP quotes created via CRM 70 IC.
When I create ERP Sales order and ERP quote they do tie up to the Interaction record, but when I try search for the same using the Sales order and Quotes search category in the Interaction history, I donu2019t see any results.
Has anyone done this before in any assignments before? If yes can please throw some light on how you handled it.
Is development required compulsory for this requirement to be fulfilled?
Thanks,
Ravi

There are some limitations using ERP sales orders (there is a decent OSS note that i don't recall the number)
Do your ECC orders replicate back to CRM????
IN IMG t-code CRMC_IC_AUI_MAINCAT for the inbox search yuo can set the search to be ERPORDER (means inbox will search in ECC for the document type) where ONEORDER is searching CRM for the document.

Material Description is not getting updated in IC-WebClient ERP Sales Order

Hi Experts,
The issue is with ERP Sales Order in IC web client.
Scenerio:1
While creating the Sales order, If we enter a product in Line Item 10 , which is mapped (Product Type) in both the systems(CRM&ERP) . It will take the description for that product correctly. If we enter another product in Line Item 20 , which is not mapped (Product Type) in CRM system (only available in R/3) the description of the previous line Item product (Item 10) inherited to Item 20 instead of taking the description of Item 20.
Scenerio:2
If we enter a product in Line Item 10(as a first Item) , which is not mapped (Product Type) in CRM system (only available in R/3) It will take the correct description for that product . And there is no problem for Second line Item, even though the Second line Item is not mapped (Product Type) in CRM system (only available in R/3)
Technically speaking :The Product which is mapped in both the systems is entered as first line item , this product description is copied for all the line items below (i.e 20,30,40) which are not mapped in both the systems. As and when we entered a mapped product in line Item 50 , It is taking the correct description of Item 50
Kindly advise.
Thanks in Advance,
Raja
Edited by: Raja Parasa on Feb 26, 2010 5:23 AM
Edited by: Raja Parasa on Feb 26, 2010 5:24 AM

Hi Raja,
This looks like a bug.
sorry for not answering ur question.
However, since you are using ERP sales order, i request you to look at my issue in the below thread and answer if you had similar issue.
let me know if i can speak to you in person.
GATP (APO) Check results in ERP Sales order.
thanks
shree

The IC WebClient profile does not have a component 'ERP Sales Order'

Hi CRM Experts,
While creating the ERP Sales Order in web-IC
we have bumped into following error:
"The IC WebClient profile does not have a component 'ERP Sales Order'".
And also we are not able to see sales area data and Plant data in the drop down lists.
we have done the following settings:
1) ERP Sales Order Profile:we have defined ERP Sales Order profile,maintained RFC destinatin and assigned document type to ERP Profile.
2) Business Transaction Launcher: We have defined the Business Transaction Profile and assigned dependent business transaction.
3) We have assigned the Business Transaction Profile to the Navigation Bar Profile.
Please suggest me regarding above error also let us know did we miss any configuration?
Waiting for your valuable inputs.
Regards,
Sree.

Hi Sree,
There is a setting needed for the IC webclient
ERP_SALES_ORDER
you need to define ERP sales order profile and assign it to your ic webclient profile.
And the ERP sales order scenario can only be used with a ERP 6.0 backend system, at least.
Hongyan

Condition Period Problem in Sales order - Need help

Hi Gurus
I am testing Sales Order back dated
Condition period Problem in Sales order
example for you to understand
Sales Order where PO date is 17.12.2007
Del Date & Price date is 13.02.2008
Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
Rajesh Chalke

Hi,
I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
Cheers,
KC

Condition records in ERP sales order still there after deletion

Similar Messages

Maybe you are looking for