Condition Type and Movement Type

Dear all,
Could anyone explain how the relationshipship between condition type and movement type are being maintain?
Example : WE03 and Mvt 101,
WA03 and Mvt 201.
Is there any table or tcodes to view these relationship?
Thank you.

Hi
Both are linked based on the Transaction event type.
for GR movements the transaction even type is WE
For GI Movements the transaction event ype is WA.
Thanks & Regards
Kishore

Similar Messages

Inspection type and movement type

how is the movement type related to the inspection type? i.e. when doing a UB_stock_transfer order, what movement type it uses and to what inspection type it assigns? also what other movement type uses the other inspection type?

Hello Cedrick
first you need to maintain the view Quality Management for your material. Inspection type assignment to movement type you can see on the following customizing path: Quality Management -> Quality Inspection ->Inspection Lot Creation -> Inspection for Goods Movements
Hope this helps.
Michael

Purchase Order Type and Movement Type in MIGO

Hi
Is there a way to have a movement type automatically posted in MIGO for different Purchase Order Document Types?
THanks

Hi
If i understand correctly you want to post a single GR pertaining to 2 different PO's that are created.
If that is the case, I think you cant even post GR for different PO's in a single MIGO.
Thanks
Kalyan

Relation between Inventory Process keys and movement types

Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
Raju

Hi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj

Initial Stock Upload T code MB1C and Movement Type 561through LSMW - Error

Hi,
Trying to Upload the Initial Stock, Transaction Code MB1C and Movement Type 561 through LSMW.
While recording the fileds, system giving a message of Code Block.
Please let us know about Code Block while uploading the Initial Stock.
Thanks
Siddu.

Check this thread
[Re: Coding Block in LSMW recording via MB1C|Coding Block in LSMW recording via MB1C;
thanks
G. Lakshmipathi

Debit/Credit sign settings of item and movement type usage

Dear BCS Experts,
According to your experience, where are Debit/Credit sign settings of item and movement type used in BCS? As I know, they can be used during data collection. Any other thoughts?
Thanks.

Actually, Barry, I recognised that that was not a doubt regarding BCF. It was (and still is) a doubt about the MoveType sign for that values that are generated automatically during the CoI activities.
Since the decrease/increase for such activies is defined, there is a question if the sign of these MoveTypes may interfere with the amounts or the side to be placed in (debit or credit).
Do you have experience in this?

Account Determination and Movement type

Hello Experts,
From SD course, we know that account determination is Account Key + Account assignment groups for customer and material respectively + Sorg + COA.
So, what does it mean by this definition of Movement type:
"The movement type is a three-digit key used to differentiate between goods movements in the R/3 System. Examples of these goods movements are goods receipts, goods issues or transfer postings It plays a central role in Automatic Account determination"
regards
Pascal

From SD course, we know that account determination is Account Key + Account assignment groups for customer and material respectively + Sorg + COA.
This is related to revenue account determination. Normally carried out by SD personal using t.code VKOA.
The movement type is a three-digit key used to differentiate between goods movements in the R/3 System. Examples of these goods movements are goods receipts, goods issues or transfer postings It plays a central role in Automatic Account determination
This is related to inventory account update (quantity/value]. For example, when a goods issue is made, the value and quantity in the stock account needs to be reduced. The G/L account assignment is configured by MM personnel using t.code OBYC.
Regards,

Inspection and Movement types...

Hi ALL,
Where can we find that for a particular inspection types what are the movement types assigned....
i.e. for eg : Inspection type '04' has movement types '101,261...etc assigned...Where do we assign these?
Thanks
Regards,
Ameya K.

Hi Ameya
It's not a straight forward assignment.
Inspection Types are assigned to Inspection origins.
Inspection origins are assigned to Movement types.
1) Inspection Origin to Inspection Type Assignment
Quality Management --> Quality Inspection --> Inspection Lot Creation->Maintain Inspection lot rigins and assign inspection types
2) Movement type and Inspection origin assignment
Quality Management --> Quality Inspection --> Inspection Lot Creation->Inspection for Goods Movements
Best regards
Ramki

Condition class and calculation type missing for conditions downloaded from

Hi All,
I have downloaded all the condition types from R/3 using dnl custcndall
I have even downloaded the following using r3as
dnl_cust_cnd
dnl_cust_prc
dnl_cust_price
But I have noticed that for the downloaded condition types, condition class and calculation types are missing. Please suggest.

I have faced the same issue recently.
The solution is in adapter object DNL_CUST_CNDALL for table T685 and other tables for T685 in that objet put the filters for condition type
for ex: KSCHL eq PR00
This sure will work.
But you have to set this filter for all tables T685*
Thanks
Sarabjeet

Valuation class and movement type

Hi sirs,
What exactly mean by valuation class and is there any sublink to valuation class and movement type.
BSR

Hi BSR,
Regarding the meaning of valuation class and link between valuation class and movement type, you just have to understand this.
valuation class + movement type = transaction key --> GL account
explanation :
Valuation class
It is a field maintained in the accounting view 1 of Material master. This is nothing but the classification of material like Raw material, Finished goods, WP, stores & spares etc. It is indicated as numerical number.
Movement type
This is a 3 digit numerical code which is used for all material movement in MM module. Say for example movement type 101 is used for Goods receipt from vendor or from production.
Transaction Key
The combination of valuation class and the movement type translates into a transaction key which indicates the type of transaction.
remember:
The combination of Valuation Class + the Movement Type helps in determining the GL accounts automatic updates.
hope it helps and don't forget to assign points.
regards,
Lily

BAPI_GOODSMVT_CREATE with GM = 03 and Mov. type 961

Hello,
I keep running in to the same error message when test-running the BAPI_GOODSMVT_CREATE bapi with GM 03 and mov. type 961.
Although for my product MM03 says that I have 999 tones of stock for unrestricted use I keep getting the message:
"Deficit of SL Unrestr. prev. 1 T: 900253 DE01 D1CD"
can anyone understand the reason for this ?
The application consultants have no problems posting the goods movement but I keep getting the same error message no matter what quantity I try to move.
Grateful for any help on this matter !
Best regards
//Erik

Hello again,
After having changed the posting date I now have error message:
"Fld selectn for mvt type 961 / accnt 412505 differs for network (019)"
This is starting to feel like som form of customizing missing so my guess is the application cosnultants will have to look at this.
Ideas still welcome though !

Report based upon material type against movement type for a period ?

i need a inventory report which should be based upon materil type & movement type for a particular period.
For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
thanks
sam

Hi,
You can create a small program to get report.
Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
Add the below fields to out put
MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
Please take advise from ABAPer regarding prog logic
Thank you,
Anand K

Idoc type and message type

how to find the idoc type and msg type for particular delivery no.
[[i can see the idoc no in vl33n which i have to display in itab.]]

Message type. A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterizes the data sent across systems and relates to the structure of the data called an IDOC type (see below). For example, MATMAS is a message type for Material Master, and INVOIC is a message type for an Invoice (Billing Document). ALE supports over 200 message types in R/3 and about 200 application areas.

IDOC type and IDOC. An Intermediate Document (IDOC) type represents the structure of the data associated with a message type (DEBMAS02 for message type DEBMAS Customer Master, and WMMBID02 for message type WMMBXY Goods Movements), while an IDOC is an object containing the data of a particular message type. IDOCs are data containers with intelligence built in. Each IDOC contains one and only one business object. For example, an IDOC of type SHPMNT01, message type SHPMNT, will contain data only of one Shipment Document. Generally, the architecture of an IDOC is independent of the message type by virtue of ALEs ability to redefine it for any message type.
Use transaction BD64 or the following menu path to maintain the model: From the IMG (Implementation Guide), Cross-Application Components -> Distribution (ALE) (*) -> Distribution Customer Model -> Maintain Distribution Customer Model Directly -> Maintain Distribution Customer Model Directly.
Hope this helps you....
Regards,
Pavan

Diff b/w reference type and elementary type

hi all
can any one what is the diff b/w reference type and elementary type in data element ....
thanks
lokesh

The data type attributes of a data element can be defined by:
Specifying a domain whose attributes are copied by the data element.
Specifying a build-in type where the data type, number of places, and possibly decimal places can be directly specified.
Specifying a reference type, i.e. reference to a class, an interface, a type defined in the Dictionary, a built-in type, or a generic reference to ANY or DATA.
In the maintenance screen you can set the option you require by setting the appropriate flag (domain, built-in type, reference type) and filling in the corresponding input fields.
A reference type is a reference to another type. There are the following kinds of reference types:
Reference to a class or an interface
Reference to a type defined in the Dictionary
Generic reference to ANY, OBJECT, or DATA
Reference to a built-in Dictionary type with specification of the length and possibly also the decimal places
You can use a reference type to define the data type properties for a data element, or for typing the component of a structure or the line type of a table type.
In the field Referenced type, enter the name of a class, an interface, the generic references DATA, OBJECT, ANY, or the name of a type defined in the Dictionary. If the reference type is to be a predefined Dictionary type, choose the reference to the predefined type. Enter the number of characters and, if required, the number of decimal places.
where as
The data class describes the data format at the user interface.
If a table field or structure field or a data element is used in an ABAP program, the data class is converted to a format used by the ABAP processor. When a table is created in the database, the data class of a table field is converted to a corresponding data format of the database system used.
You can find a detailed description of the data classes allowed in the ABAP Dictionary in Overview of the Data Classes.

Automatic determination of Delivery type and Billing type in a sales order

Hi,
I want to know that in a sales order cycle, how does automatic assignment of delivery type and billing type takes place after we create a sales order?
For example,when I create an outbound delivery for a sales order of type normal (OR) then in that case how does the system knows that it has to create an outbound delivery of type LF.How does the system propses it automatically and same is the case of billing document.

Hi
In customising the sales document type (Tcode VOV8) -
specify the default Delivery type in the field DELIVERY TYPE in the 'Shipping' area of the sales document type customisation.
Similarly you can specify the billing type in the BILLING area for both Delivery related billing and Order related billing.
Thanks,
Ravi

Condition Type and Movement Type

Similar Messages

Maybe you are looking for