Conditional Lovs for the same item

Hii all
i have 2 text items
A and B
and have 2 lovs
lov1 and lov2
In text item A i can select from two values X and Y
and i have attached both the lovs to B
now if i select value X from item A
Then the lov that should be shown for the item B is Lov1
and if i select the value Y for item A
the lov that should be shown for the item B is lov 2
How to achieve it ???
Plzzz help Mandar

... and another alternative is ...
KEY-LISTVAL trigger on item2
DECLARE
item_id Item:=Find_Item('my_block.item2');
lov_success boolean;
BEGIN
IF :my_block.item1='A' THEN
lov_success := show_lov('LOV1');
ELSE
lov_success := show_lov('LOV2');
END IF;
END;
a possible advantage of this method is that you can test the value of lov_success if you want to.

Similar Messages

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara

HT201359 Why i have been billed six times for the same item? Pls help how to refund..

Why i have been billed six times for the same item? Pls help how to refund..

Did you change your card details on your account a number of times when trying to purchase the item, and five of them are temporary store holding charges : http://support.apple.com/kb/HT3702 ?
If they are all 'proper' charges then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How to Get Choices as a Dropdown from a different Column for the same Item In a Document Library?

Hello All,
I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library.
To be specific.
I have Created a Project Document Set, Which has a Column called "Project Members" where all the members will be listed. This will be inherited to all the documents in that Project Document Set. This is used to grant Permission using Workflow.
I also have "Document Members" Column(This is only for Documents) who will be given Edit permissions to that Document using a Workflow. This can be any type of column(choice, People or Group etc) As long as I can select multiple values.
I am looking for a way to get the "Project Members"(Values or Users) as choices for "Document Members". I know this is possible in the List as you can customize in the InfoPath Form. But not sure in the Document Library.
Document Members can only be the members from the Project Members, In order to grant granular Permissions for the project And Documents using a Workflow
Document Library
Project Document Set Name
File Name
Project Members
Document Members
Project A
User1;User2;User3
Doc1
User1;User2;User4
User1;
Doc2
User1;User2;User5
User1;User2;
Doc3
User1;User2;User6
User1;User2;User3;
Project B
User5;User6;User7;
Doc1
User5;User6;User7;
User7;User5
Doc2
User5;User6;User7;
User7;User5
Doc3
User5;User6;User7;
User5;User6;User7;
Thanks for your time.

>
Jenny Karunakaran wrote:
> Hi Jung,
>
> Thanks for the reply. But I dont know how to assign value set to this attribute(i.e. Context atribute to which filter value property is bound). Can I use a supply function for this ?
>
>
> Regards,
> Jenny
No. A value set and a supply function are two completely different things. You use this Context API to populate the value set for an attribute:
IF_WD_CONTEXT_NODE_INFO=>SET_ATTRIBUTE_VALUE_SET
Value Sets are also how ByKey UI elements (like the DropDownByKey) are built. Here is a help document that discusses value sets - but in the context of the ByKey UI elements. The process is the same for creating the value set however:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bb/69b441b0133531e10000000a155106/frameset.htm

Charged twice for the same items brought onilne

Beats by Dr DreurBeats Earbud HeadphonesSilver9000016801
SkullcandyInk39d 2 Earbud HeadphonesRedBlackS2IKDY010
SonyZX Series OnEar HeadphonesMDRZX110WHI
TargusAscend Backpack Laptop CaseBlackTSB710US
TargusDebossed Laptop SleeveGrayBlackTSS600US
I brought these above items on 11/28/2014 for $108.02. When I pressed "Place Order", a pop up came which said "Their has been an glich while placing the order, please contact the costumer care". So what I did is that I pressed the "place order" again. So this time the order got successfully placed. I then went into my BestBuy account and I could see my order. But when I saw my Bank Account, I was charged twice for the same order. I need your help to sort this problem.

Hello zuberkampli,
Thanks for choosing Best Buy when making your Black Friday purchases! I do however apologize, as it sounds like there may have been a slight hiccup when placing your order. I’m familiar with the issue you speak of and I’m happy to review your order details to determine the best route to go here.
I’ve located your order using your email address on file for the forums and I’m happy to confirm that the issue you endured did not result in a duplicated order. With that, what you’re seeing is a secondary authorization, not a charge, and it should drop off your account in 3-5 business days, if not sooner. In the meantime, I apologize once again for any inconvenience the secondary authorization may cause.
Thanks for posting on the forums and please let us know if you need any assistance in the future!
Best regards,
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

TS1424 iTunes is downloading the same selection twice; I do not want to be charged twice for the same item

I preordered a new release by Muse and when I went to download it, i-Tunes prompted me to click on the selection. My computer then began the download of TWO albums. I do not want to be charged for two downloads of the SAME selection.
And BTW... why does Apple make getting help for such issues a convoluted pain the tush???
Thank you.
M.A. Gardiner-Conner
Fortuna CA
707-725-7863

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

How to manage different supply parameters for the same item based on demand quantity?

We are using unconstrained ASCP. We have some products that can be produced in a 'small' machine or can be produced in a large tank. If ASCP has created a planned order for a quantity less than 1000 it will be made on the small machine with the supply quantity = demand quantity. For example, we have a demand of 250, we will make exactly 250 on the small machine. But if the demand quantity is greater than 1000 we will make the supply in the tank with a fixed order quantity of 1590. Financially it will cost us less to do this and scrap the difference because the small machine is very expensive to run compared to the tank.
The challenge is, say we need 1200. ASCP generates a planned order for 1200 and all the dependent demands support 1200. Now we want to make 1590 and we are short of materials. This assumes we have set the item with no supply parameters. On the other hand, if we set a fixed order quantity of 1590 but only need 100 then we we have to scrap the materials for the balance due to a short shelf life.
Any ideas how to set a supply quantity using different parameters based on the demand quantity?
Mark Madal

Hi Mark,
I personally don’t see any standard solution for this requirement especially with an unconstrained plan.
However, if it is feasible, you can try below solution with a 'constrained plan with decision rules enabled' and check if it works,
1.   1. Define two different items – Item A and Item B
2.   2. Item A uses small machine in its routing and can have any demand that is below 999. So, Max order quantity = 999.
3.   3. Item B uses Large Tank in its routing and is a substitute of item A. Also, fixed order quantity = 1590.
4.   4. Define component substitution relationship between A and B. A and B will have identical BOM.
In a constrained plan with decision rules enabled, optimization logic will ensure that planned orders are generated for Item A whenever there is demand below 999. And for Item A, supply will always be equal to demand quantity. When the demand is more than 999, optimization engine will select substitute item B and will generated fixed supply of 1590 for it.
Check if this satisfies your requirement.
Regards,
Durgesh P
(Please mark this post helpful or correct, if answered)

How to maintain 2 condition record for the same message type

Hi,
My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages should get outputed.
1) A print should go to the Printer ie:Option1 Print output
2) A PDF should go to the vendor ie:Option 5 External send
I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
How do I output 2 messages while releasing the PO
KN

Please check this answered link:
Re: Two PO Outputs.
Re: Emailing PO to Vendor, copy to buyer as well
Edited by: Afshad Irani on Jun 16, 2010 12:05 PM

Free quantity receive for the same Item during MIGO

Hi All,
I want to receive full Quantity but want to pay for 90% & the rest 10% is free.
Ex- I want to receive Material X of 54 kg per Bag at a price Rs.100 per kg.
      But Chargeable quantity is only 50 kg per bag.
      Want to Receive 10 Bags of 540 KG but want to pay for only 500 Kg at a price of Rs 100 per Kg.
       My PO is showing the amount for 500 kg but after GR the amount in MIRO is showing for 540 KG
       Like for the above case My PO is Showing Rs. 50000 But after full GR in MIRO it shows Rs. 54000.
       Can any body tell me how should I pay for the Chargeable quantity only.

Hi,
You have to make use of free goods concept before you create a PO.
Or create the quantity you got as free using mvt type 511 seperately in MIGO as to avoid the amount taken for IR.
Regards,
Deepak

HP in part numbers for ink differ in the uk and the US for the same item ?

Purchasd my printer in the UK. PHOTOSMART 2575 ALL IN ONE
Trying to source the correct HP ink
C8767E on the back of the cartridge. is not recognised
C8767EE is recognised as HP 339 Black Inkjet
I am directed to the US site.
niether is recognised by the us site where i will buy my replacements
if i search the US site by model number I get HP98
http://h10025.www1.hp.com/ewfrf/wc/product?product=457333&lc=en&cc=us&dlc=en&lang=en&cc=us&y=10&x=7
and no sign of the 336 337 or 339 as listen on page 85 of my userguide.
I assume there is some cross matching of part numbers between the UK and the us site.
Having spent two weeks wandering around all the stores in Mandeville and Kingston Jamaica ( no mean feat i can tell you) looking for the 33 series as lised in the userguide. It will be with mixed blessins if there is a comparison chart between what the UK says I can use and what the us says I can. Then I can go shopping locally with my us part numbers and people might actually have stock.
If i assume that the 98 is the correct number there is not even a list on the site to confirm what printers the 98 can be used on.
Come HP you have not done well on this issue. Basicis such as catrirdge supplies should have global partnumbers or I should be able to easily acesss a compatibility Matrix.
And ive not started looking for colour yet.

Hi, if you purchased the printer in the UK and have now relocated you'll need to get the region reset on the printer. You can do this by contacting phone support ( Contact HP ) . Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

I purchase ringtone from itunes but my item wasnt showing that it was downloading itunes charge me for the same item more than once.asking for a refund who do i talk too? is there a number i can call?PLEASE HELP!!!!!

please helping looking into a refund

You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption , and then see what contact methods are available

I was charged twice for the same order!

I was charged twice for the same item; once for my online pre-order through BestBuy.com and again when I picked up the item at the Best Buy Store.
I pre-ordered an Xbox One - Day One Edition from BestBuy.com on 09/02/2013. I scheduled to pick up the item at the Best Buy Store in Eden Prairie after the Microsoft release date of 11/22/2013. On 11/25/2013 I arrived at the Eden Prairie Best Buy excited to pick up my Xbox One - Day One Edition.
The Best Buy staff had difficulty linking the pre-order to the in-store pick up. They couldn't confirm if I already paid for the item through BestBuy.com. They asked for my various email addresses and phone numbers and I was required to show them my ID which matched the name on the sticker which was placed on the side of the pre-ordered item. I waited 10-15 min at the checkout until the 3 Best Buy employees troubleshooting the transaction were satisfied. Little did I know, I was being charged twice for the same item! Once for my online pre-order through BestBuy.com and again at the store when I was picking up my item! The worst part is that during the confusion during the in-store pickup, the Best Buy staff created a new transaction ticket to complete the checkout. This created a new entry in their system which claimed that I picked up two Xbox One - Day One Editions! I would like to point out that the Day One Edition could only be obtained through the pre-order process, and only one pre-order was allowed per person! (This was Best Buy's Policy) My transaction involved only one pre-order number! (removed per forum guidelines) This makes it impossible to sell me (2) Xbox One - Day One Editions.
On 11/25/13 I received 2 paper documents along with (1) Xbox One - Day One Edition with serial number: (removed per forum guidelines) from the Eden Prairie Store.
1. A Best Buy Pick-up Acknowledgement for $536.36 for order number (removed per forum guidelines). This document did not contain a serial number for the item. The document was printed at 6:31PM.
2. A standard Best Buy receipt for $536.36 printed at 6:35PM. (4 minutes after the first document) This document did contain a serial number for the item: (removed per forum guidelines).
Now for the two charges:
1. The first charge on my card ending in 8754 was on 11/22/13 for $536.36 from BestBuy.com.
2. The second charge on my card ending in 8754 was on 11/26/13 for $536.36 from Best Buy Eden Prairie.
I noticed the additional charge error after I returned the item (that I was charged twice for -Serial Number: (removed per forum guidelines) on 01/02/14. I checked my account to make sure I was refunded and I noticed I was charged twice. At this time I spoke with the Best Buy Customer Service at the Best Buy Eden Prairie Store. They recommended I call the Best Buy number on the receipt to sort it out. I called the number and due to the holiday congestion I was unable to connect with a Best Buy Representative after waiting for an hour. I again contacted the Best Buy Customer Service at the Eden Prairie Store and they recommended I file a claim with my bank.(Wellsfargo)
I filed a claim with WellsFargo ((removed per forum guidelines)) but after 4 weeks the issue did not get resolved.
After the Wellsfargo claim failed I filed two new claim numbers with Best Buy in hopes that working with Best Buy:
1. Best Buy Claim # (removed per forum guidelines)
2. Best Buy Claim # (removed per forum guidelines)
I also printed the following documents on 06/1/14 and presented them to the store manager for review:
-Bank account statement showing the two charges 4 minutes apart.
-A Best Buy Pick-up Acknowledgement
-A standard Best Buy receipt
-The return slip from the return on 01/02/14.
-Screen captures of my email pre-order acknowledgement
-Screen captures of my email pick-up acknowledgment.
After spending 2 hours at the service desk I was denied a refund because Best Buy claimed two Xbox One -Day One Edition's were purchased by me, 4 minutes apart, however, Best Buy could only provide one serial number for the transaction. I stated that the claim could easily be settled if they provided the two serial numbers in their system that were sold to me with my signatures. They could not. It is frusterating as the customer because I know there was only one serial number involved in the transaction.
I then filed a claim with the Better Business Bureau. Best Buy responded that their records show no inventory adjustments therefore they will not issue a refund. To prove that they sold me two xboxs they could simply provide the two serial numbers that they received payment for. Best Buy will not do this because they know they only have proof of one serial number in the transaction.
I consider Best Buy's response unethical. I don't want to believe that they are in the business of stealing but their lack of understanding and willingness to entertain the possibility that they made a mistake is convincing me otherwise. If you can't prove you sold two items, you have no business in charging for two items. I can prove that I have been charged twice in error. I was also disappointed that they did not address the facts in my claim. Best Buy is losing a customer of over 20 years.
Thank you for your time in reading my message.

Hello Consumer777,
I sincerely appreciate the amount of detail you’ve provided in your post. It appears you’ve been dealing with this scenario for quite some time, and I thank you for bringing it to our attention on the forums.
I’ve reviewed your case history with Best Buy in regards to this issue, as well as the details of the Better Business Bureau (BBB) case that was opened. We provided our definitive response to the BBB and Best Buy’s decision on the matter has not changed.
Thank you for sharing your feedback on the forums.
Sincerely,
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

TS1424 charged twice for a same item in same dispositive

IT IS POSSIBLE TO GET CHARGED TWICE FOR A SAME ITEM PURCHASED ON ITUNES???? PLEASE HELP.... WHAT TO DO????

Welcome to the Apple community.
If you think you have been charged twice for the same item, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Different LOVs in af:query and af:form for the same VO attribute

Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?

We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel.

Conditional Lovs for the same item

Similar Messages

Maybe you are looking for