Conditional page break with multiple conditions

Hi,
have not found anything in the forum, so i hope its not a repost.
I print a table and need a pagebreak before every new record.
That sounds easy, so I used:
Report.KeyfigureDetails.Container.KFUID ne Report.KeyfigureDetails.Container[-1].KFUID
Its works well BUT it does not inserts a page break BEFORE the very first record even if I say its "before" and "top of next page".
So I used:
(Report.KeyfigureDetails.Container.KFUID ne Report.KeyfigureDetails.Container[-1].KFUID) or
(exists(Report.KeyfigureDetails.Container[-1].KFUID) = 0)
Result: No pagebreak at all. There must be a error inside my statement.
I used two conditions. one with
Report.KeyfigureDetails.Container.KFUID ne Report.KeyfigureDetails.Container[-1].KFUID
and one with
exists(Report.KeyfigureDetails.Container[-1].KFUID) = 0
But again no pagebreak BEFORE the very first line.
What am I doing wrong? I just want to have a break before every record, even the first one.
I am using formcalc. If a conditional pagebreak in java does not need the form to be interactive/dynamic such a solution would be appreciated as well. I just want the form to be 100% static to avoid additional licenses.
Thanks!

Oh sorry! But you are totally right.
The problem was, that FormCalc did not inserted the correct structure of the object.
The structure was like: subform1.subform2.subform3.object.
FormCalc just inserted: subform1.object
Writing the code manually made the system at least to perform the page break after the first record.
The page break before the first record could somehow not be solved by me with:
exists(Report.KeyfigureDetails.Container[-1].KFUID) = "0"
I then remembered Otto Gold's recommendation to use Java as it is more powerful. And in deed Otto gave me the solution by his comment.
As a final solution i use two different conditional breaks.
The fist to perform the break before the first record:
this.resolveNode("Container[-1].KFUID") == null
The second to perform the page break after each new "KFUID":
if (this.resolveNode("Container[-1].KFUID") != null) { this.resolveNode("Container[-1].KFUID").rawValue != Container.KFUID.rawValue }
Maybe a smart Java guy like Otto Gold can put those two conditions into one
I was not, but these two solved my problem.
I dont say that FormCalc is not able to solve the problem as well. But I have very limited knowledge about the Adobe forms and at the moment I have no time to dig deeper into this.

Similar Messages

Help with pagination and conditional page breaks

I have a rather complex form where pages are added based on what the user has entered in a table with repeatable rows. For most of the pages, conditional page breaks are working fairly well, but I have a group of pages with nested subforms that need page breaks. The inner subform is breaking as expected, but the parent page break isn't triggering for some reason.
Is this a bug within Livecycle or is it possible to fix?
Thanks!

May be having a look at the form helps..
If you can send the form and XML data file to [email protected] I can have a look at it..
Thanks
Srini

Dynamic tables and conditional page break

I have inserted a table in my form and have included an Add New Row button to insert additonal rows. I want a maximum of 16 rows added with a subtotal field. I want the table, then to automatically go to a new page with a subtotal field. At the end of all pages I want to include a total field. The table goes to the next page after a number of rows are entered, but there is not a break; the original form continues. How do conditionally break the page and have a (new) table display in the second page?
Thanks for your help.

Hi Paul,
Thanks for working with me on this. I have sent a copy to the gmail.com address. I'm new to LiveCycle, so please forgive me.
Date: Thu, 29 Jul 2010 09:18:53 -0600
From: [email protected]
To: [email protected]
Subject: dynamic tables and conditional page break
You can accomplish that with a single table and some creative script. I suggest that you get the table worked out and working correctly then we can add in the page totals and final total afterwards. Once the table is ready email the form to mailto:[email protected] and I will put together a sample for you that shows what to do. Please include a description of what you want to do with the email as the mail message and this forum are not tied together. Also if you have a data file that fills out the table that would be useful as well.
Paul
>

Conditional Page break in Adobe forms.

Hi all,
          In Adobe forms i am displaying the purchase order details.i want to create a conditional page break..
   i am displaying purchase order header details below that i am displaying the item details of the purchase order.
   i one page. i want to display only 4 purchase order header and 3 items for each purchase order. in total i want to display 0nly 16 lines in a page. my Hierarchy look like this...
data
....Masterpage
---......page1
.....static image
....bogypage(subform)
---......headertable(subform)
..............headerdata(subform)
........................ebeln
........................burks
........................table(table)
...........................group(group)
...............................row1(row)
..................................ebelp
.................................matnr
with regards,
    sivaprasath.s SAP Consultant...

try using the below java script:
if (this.index != 0) { this.index%16 == 0 }
let me know if it works.

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

Conditional Page breaks In Adobe forms

hi experts...
I have to do conditional page break for item table for each VBELN. if vbeln has more than 5 line items ...Have to do page break and
remaining items have to display on next page..
thanks in advance
bala...

try using the below java script:
if (this.index != 0) { this.index%16 == 0 }
let me know if it works.

MDX Calculated Member With Multiple Conditions

I need to create a calculated member in my cube that spans multiple dimensions. A current calculated member looks like this:
[Employee Hours Category].[Utilization Category].[NON-PTO], [Measures].[Employee Hours]
This calculated member returns all the hours an employee worked that are not PTO.
I need to select employee hours but with multiple conditions:
- [DIM BILL STATUS][Bill Status] equals 0
- [Employee Hours Time Category].[Time Category] equals "Client Facing"
- [DIM PROJECT].[Client] isn't like "Olson"
I know this is probably pretty easy, but I'm horrible with MDX!
Thank you!!
A. M. Robinson

Thank you...
Your answer looks good but I was actually able to figure out most of it, but still looking how to incorporate a FILTER into the MDX. I would like to FILTER like this:
FILTER ([DIM Project].[Client].[Client].Members ,
NOT InStr([DIM Project].[Client].CurrentMember.MEMBER_NAME, "Olson")
Heres the MDX I have so far that is working fine:
([Employee Hours Time Category].[Time Category].&[Client Facing],
[DIM BILL STATUS].[Bill Status ID].&[1], [Measures].[Employee Hours])
Do you just wrap the whole MDX in the filter, and if so, how would that be formatted?
A. M. Robinson

Outer Joins with multiple conditions - alternatives to UNION?

It is my understanding that Oracle 8i does not directly support mutiple conditions for outer joins. For instance, I'm looking for PEOPLE who may, or may not, be on MEDICATIONS.
All MEDICATIONS are listed with DRUGNAME and DRUGID. There thousand of different drugs. I'm only looking for PEOPLE on either one or two of them (to make it simple) or no drug at all (ignoring all other DRUGS they're on..) IF they are on the DRUG, it's gerts printed.
I'd ideally do a LEFT OUTER JOIN to do this with multiple conditions:
SELECT DISTINCT
PERSON.NAME,
MEDICATION.DRUGNAME,
MEDICATION.DRUGID
FROM
PERSON,
MEDICATION
WHERE
PERSON.ID = MEDICATION.ID (+) AND
(MEDICATION.DRUGID (+) = 632 OR
MEDICATION.DRUGID (+) = 956)
This, of course, is not valid, at least in 8i...
So I've taken the UNION approach:
SELECT DISTINCT
PERSON.NAME,
MEDICATION.DRUGNAME,
MEDICATION.DRUGID
FROM
PERSON,
MEDICATION
WHERE
PERSON.ID = MEDICATION.ID (+) AND
MEDICATION.DRUGID (+) = 632
UNION
SELECT DISTINCT
PERSON.NAME,
MEDICATION.DRUGNAME,
MEDICATION.DRUGID
FROM
PERSON,
MEDICATION
WHERE
PERSON.ID = MEDICATION.ID (+) AND
MEDICATION.DRUGID (+) = 956
This of course, does work, but as I've added more drugs this becomes quite unwieldly and not really sure what this does to performance. (There are also several more joins to other tables, not relevent here.)
In addition, if I import this into Crystal Reports 8.5 (as opposed to the Crystal Query Designer), it refuses to recognize the UNION.
-- Any suggestions for alternative syntax ???
-- Has this been addressed in 9i ???
Thanks,
Will

You could try
select Distinct Person.Name, Med.DrugName, Med.DrugId
from Person,
(select ID, DrugName, DrugId from Medication
where DrugId in (632, 956) ) Med
where Person.ID = Med.ID(+)
SELECT DISTINCT
PERSON.NAME,
MEDICATION.DRUGNAME,
MEDICATION.DRUGID
FROM
PERSON,
MEDICATION
WHERE
PERSON.ID = MEDICATION.ID (+) AND
(MEDICATION.DRUGID (+) = 632 OR
MEDICATION.DRUGID (+) = 956)
This, of course, is not valid, at least in 8i...
So I've taken the UNION approach:
SELECT DISTINCT
PERSON.NAME,
MEDICATION.DRUGNAME,
MEDICATION.DRUGID
FROM
PERSON,
MEDICATION
WHERE
PERSON.ID = MEDICATION.ID (+) AND
MEDICATION.DRUGID (+) = 632
UNION
SELECT DISTINCT
PERSON.NAME,
MEDICATION.DRUGNAME,
MEDICATION.DRUGID
FROM
PERSON,
MEDICATION
WHERE
PERSON.ID = MEDICATION.ID (+) AND
MEDICATION.DRUGID (+) = 956
This of course, does work, but as I've added more drugs this becomes quite unwieldly and not really sure what this does to performance. (There are also several more joins to other tables, not relevent here.)
In addition, if I import this into Crystal Reports 8.5 (as opposed to the Crystal Query Designer), it refuses to recognize the UNION.
-- Any suggestions for alternative syntax ???
-- Has this been addressed in 9i ???
Thanks,
Will

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

"detected a page fragment with multiple root components" warning

I am getting a warning on the standalone WLS when I run my page that contains a taskflow as region. I am using a page fragment in my taskflow.
<Warning> <oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer> <ADF_FACES-60099> <The region component with id: ptMain:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.>
The warning states the obvious, I have everything within a panelheader in my page fragment. Also, I do not get the warning on the integrated WLS. Any ideas as to why this warning is still popping up in the log? I am using JDev 11.1.1.3.
Thanks,
Jessica

Thank you for responding. I do not have any popups. I do, however, have another region nested within this fragment ( have this warning on another fragment that doesn't have a nested region though). Here is the code for my fragment.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core">
<af:panelHeader text="Pawn"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.ph1}"
id="ph1" type="default">
<af:panelFormLayout id="pfl2">
<af:panelSplitter binding="#{backingBeanScope.backing_Fragments_PawnSearch.ps1}"
id="ps1" orientation="vertical" splitterPosition="62"
inlineStyle="width:775px; height:660px;">
<f:facet name="first">
<af:panelBox text="Search #{bindings.agency.inputValue} Data to Update"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.pb1}"
id="pb1">
<f:facet name="toolbar"/>
<af:panelGroupLayout id="pgl3" layout="horizontal">
<af:inputText value="#{bindings.control_number.inputValue}"
label="Control Number" required="true"
columns="#{bindings.control_number.hints.displayWidth}"
maximumLength="#{bindings.control_number.hints.precision}"
shortDesc="#{bindings.control_number.hints.tooltip}"
id="it1">
<f:validator binding="#{bindings.control_number.validator}"/>
</af:inputText>
<af:inputDate value="#{bindings.trans_date.inputValue}"
label="Date" required="true"
shortDesc="#{bindings.trans_date.hints.tooltip}"
id="id1">
<f:validator binding="#{bindings.trans_date.validator}"/>
<af:convertDateTime pattern="#{bindings.trans_date.format}"/>
</af:inputDate>
<af:inputText value="#{bindings.agency.inputValue}" simple="true"
required="#{bindings.agency.hints.mandatory}"
columns="#{bindings.agency.hints.displayWidth}"
maximumLength="#{bindings.agency.hints.precision}"
shortDesc="#{bindings.agency.hints.tooltip}"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.it2}"
id="it2" visible="false">
<f:validator binding="#{bindings.agency.validator}"/>
</af:inputText>
<af:commandButton actionListener="#{bindings.ExecuteWithParams.execute}"
text="Search"
disabled="#{!bindings.ExecuteWithParams.enabled}"
id="cb5"
returnListener="#{backingBeanScope.backing_Fragments_PawnSearch.refreshPage}"
action="#{backingBeanScope.backing_Fragments_PawnSearch.RenderMe}">
<af:setActionListener from="#{bindings.PawnItemView1Iterator.currentRowKeyString}"
to="#{requestScope.pawnkey}"/>
</af:commandButton>
<af:spacer width="10" height="10"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.s1}"
id="s1"/>
<af:goButton text="Clear Values and Create New" id="gb1"
destination="index.jspx"
rendered="#{backingBeanScope.backing_Fragments_PawnSearch.saveButtonRendered}"/>
</af:panelGroupLayout>
</af:panelBox>
</f:facet>
<f:facet name="second">
<af:panelGroupLayout binding="#{backingBeanScope.backing_Fragments_PawnSearch.pgl4}"
id="pgl4" layout="scroll" partialTriggers=""
visible="true">
<af:panelGroupLayout binding="#{backingBeanScope.backing_Fragments_PawnSearch.pgl6}"
id="pgl6" inlineStyle="width:775px;"
visible="#{backingBeanScope.backing_Fragments_PawnSearch.renderTF}">
<af:region value="#{bindings.PawnEntryFormTF1.regionModel}"
id="r1" inlineStyle="width:750px;"/>
</af:panelGroupLayout>
<af:panelGroupLayout binding="#{backingBeanScope.backing_Fragments_PawnSearch.pgl5}"
id="pgl5" layout="horizontal"
visible="#{backingBeanScope.backing_Fragments_PawnSearch.renderMessage}">
<af:outputFormatted value="No #{bindings.agency.inputValue} Pawn data matching the Control Number and Transaction Date from above."
binding="#{backingBeanScope.backing_Fragments_PawnSearch.of1}"
id="of1"
inlineStyle="font-weight:bolder; font-size:small;"/>
<af:spacer width="10" height="10"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.s2}"
id="s2"/>
<af:goButton text="Clear Search and Start Again"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.gb2}"
id="gb2" destination="index.jspx"/>
</af:panelGroupLayout>
</af:panelGroupLayout>
</f:facet>
</af:panelSplitter>
</af:panelFormLayout>
</af:panelHeader>

</jsp:root>

Allow page breaks with content is Disabled for Subform

Hi,
I want to display item data on form.I created a subform and dragged table from data view.
Allow page breaks with content is grayed out!!
Plus If i want to add a footer in TABLE option this is also grayed out!! Can't we create a footer from the dragged table?
FYI.. I went to hierarchy view created subform right click page and then dragged table in to this subform.
Am i doing it right?
Rgds
Vara
Edited by: Vara K on Feb 5, 2009 8:40 PM

Resolved myself.
I was creating subforms in page1 instead of the TOP context node.
So What I did is created a subform from top node and then i got pagebreak options and then dragged table.. so much fun! with forms.
rgds
Vara

Adobe Forms - Page Break via a Conditional Break

Having read through the forum I am getting the impression that Page Breaks is a bit of a problem.
I can enforce a page break between datasets by setting "After:" to "Goto Next Page", on the Object->Pagination tab, however this results in a blank page at the end of the entire output which is just the Master Page with all the static elements.
The 'Conditional Breaks' sounds like the logical point to force a page break based on a combination of inequality or if a particular data element equals a known value.
However, I don't seem to be able to get the 'Conditional Break' to work.
So, the question I would like to ask, is how can you tell if the conditional break logic is correct and whether or not it is running? For example on an ABAP system is it possible to run it and debug it?
My attempts at getting the break to open a pop up or write to disk via JavaScript fails, which is leading me to think they are being ignored by the Adobe Form at both the server and client level.
Is it possible that I have missed another setting somewhere else in the Adobe form configuration?

Hello Jason!
You are right that conditions (and all scripting) are bit tricky in this solution. Still they work.
Debugging of AIF at ABAP side is not possible due to the architecture of the solution - from the ABAP POV it is just a web-service call and receiving result (PDF) back. You can't stop it on midpoint or intercept it somehow.
At the same time there are other ways to check it.
First, you can enable trace and saving additional info in SFP transaction under Utilities -> Settings.
Details see [here|http://help.sap.com/saphelp_nw70/helpdata/EN/f7/a04aee0cb94978a011401311efe603/frameset.htm]
And the nice way to check if your condition block is taken into the account is simple check like 1 = 2.
If this works and you receive page break than all you need is find errors in your condition syntax, otherwise the problem is somewhere else.
Regards,
Petr Perstnev

Table Rows with Multiple Conditions Not Showing Up in RH

Hi everyone,
I'm currently evaluating TCS2 (Framemaker 9 and RoboHelp 8 on Windows XP) and have come across the following issue:
One of our FrameMaker source files contains a table in which one of the rows has multiple conditions applied. When one of the conditions is shown in Framemaker, and the others are hidden, the row is displayed in Framemaker as expected. However, when the file is then imported or linked into Robohelp, the same table row vanishes, even though the Apply FrameMaker Conditional Text Build Expression check box is selected in the Framemaker Conversion Settings > Other Settings screen. This only appears to affect table rows - when paragraph text is tagged with the same conditions, it is imported correctly into RoboHelp.
For example, when Condition B is shown and Condition A is hidden in the Framemaker file, the content appears like this in Frame:
Unconditional
Unconditional
Condition A and Condition B applied
Condition A and Condition B applied
Condition B applied
Condition B applied
Paragraph text with Condition A and Condition B applied.
Paragraph text with Condition B applied.
When the same file is imported into RoboHelp, the row with both conditions applied is absent from the table:
Unconditional
Unconditional
Condition B applied
Condition B applied
Paragraph text with Condition A and Condition B applied.
Paragraph text with Condition B applied.
Installing patches 8.0.1 and 8.0.2 did not resolve the issue (and actually caused other, unrelated issues) and I see the same behavior regardless of whether I import or link the FrameMaker document.
Has anyone else seen this issue? Any help would be much appreciated.
Thanks
DaveB

It just seems that the items I select as align to top in the
property inspector should force the items to the top of their
cells, unless I'm missing something.

APEX Interactive Report Compute Case with multiple conditions to highlight

My ultimate is to highligt a row in an interactive report based on two conditions. I didn't see a way to use the highligt feature with two conditions. So I thought I would try to create a computation based on the two conditions. Then use that result for the highligting. Though I don't seem to be a be able to use multiple conditions in my computation Case statement. Is there a different syntax?
Here is what I have:
Case
When C = 'Open' and I > 15 Then 'True'
Else 'False'
End The error I get is: Invalid computation expression. and
Application Express 4.0.2.00.07
Thanks!
Edited by: cjmartin on Jan 10, 2012 10:57 AM

I'm surprised no one responded to this. What I did to resolve this issue was create a nested case statement. I don't think this was a good solution, but I can't find anyone else giving input. I know I can create another computational column in the select statement for the report, but the 'Interactive Report' part is where this should be. I want my clients to calculate what they want. Kind of hard when you can not use an 'and' for a range criteria.

SQL Script - error in executing the select with multiple conditions

Hi gurus,
I'm having trouble in the command syntax below:
SELECT * FROM "TEST_RVS"."VH_TEST" WHERE "AUFNR" = 20210807 AND "BWART" = 101.
WHAT IS THE CORRECT SYNTAX WHERE TO CONDITION WITH MULTIPLE FIELDS?
Thanks !

What is the error you are getting? Did you try wrapping the values with quotes?
SELECT * FROM "TEST_RVS"."VH_TEST" WHERE "AUFNR" = '20210807' AND "BWART" = '101'.
Cheers,
Rich Heilman

Conditional page break with multiple conditions

Similar Messages

Maybe you are looking for