Problem in Standby

Hi.,
We are facing the following error in our standby database 8.1.7.4
SVRMGR> SVRMGR> ORA-00283: recovery session canceled due to errors
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 566772 change 1684887738171 time 12/23/2006 09:14:01
ORA-00334: archived log: '/test/arch/apply/arch.logLOG345674_1.ARC'.
Please give me a suitable solutions for this.
Thanks in advance.

ORA-00368 checksum error in redo log block
Cause: The redo block indicated by the accompanying error, is not valid. It has a checksum that does not match the block contents.
Action: Perform recovery with a good version of the log or do time-based recovery up to the indicated time. If this happens when archiving, archiving of the problem log can be skipped by clearing the log with the UNARCHIVED option. This must be followed by a backup of every datafile to insure recoverability of the database. Restore the correct file or reset logs.

Similar Messages

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Problem Converting standby database from snapshot to physical

Any help willl be greatly appreciated...
I am trying to convert a standby database that is in "snapshot" mode back to "physical" standby and I am encountering problems in the process from the "DGMGRL" command line.
Both instances are on the same physical machine. Everything was working fine untill I tried to change the db from snapshot to physical. The DGMGRL starts the conversion process and is able to shutdown but when trying to restart the instance is fails and reports that the service is not defined.
Here is the issue I am facing:
C:\app\MMJ\product\11.1.0\db_1\BIN>
C:\app\MMJ\product\11.1.0\db_1\BIN>set ORACLE_SID=I11G1 <======= the primary database
C:\app\MMJ\product\11.1.0\db_1\BIN>dgmgrl
DGMGRL for 32-bit Windows: Version 11.1.0.6.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys/password@i11g1sb <===== the standby database currently in snapshot mode
Connected.
DGMGRL> connect sys/password@i11g1 <==== the primary database
Connected.
DGMGRL> convert database 'i11g1sb' to physical standby;
Converting database "i11g1sb" to a Physical Standby database, please wait...
Operation requires shutdown of instance "i11g1sb" on database "i11g1sb"
Shutting down instance "i11g1sb"...
Database closed.
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "i11g1sb" on database "i11g1sb"
Starting instance "i11g1sb"...
Unable to connect to database
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Failed.
You are no longer connected to ORACLE
Please connect again.
Unable to start instance "i11g1sb"
You must start instance "i11g1sb" manually
Failed to convert database "i11g1sb"
DGMGRL> show configuration
Configuration
Name: DGConfig1
Enabled: YES
Protection Mode: MaxPerformance
Databases:
i11g1 - Primary database
i11g1sb - Snapshot standby database (disabled)
Fast-Start Failover: DISABLED
Current status for "DGConfig1":
SUCCESS
DGMGRL> exit
C:\app\MMJ\product\11.1.0\db_1\BIN>set ORACLE_SID=I11G1SB
C:\app\MMJ\product\11.1.0\db_1\BIN>sqlplus /nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Mar 25 11:40:16 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size 1333648 bytes
Variable Size 369100400 bytes
Database Buffers 50331648 bytes
Redo Buffers 6086656 bytes
Database mounted.
Database opened.
==============>>>> as you can see I can start the standby database without any problems and even query the table in which I made some changes. I had added the record with "Region_ID"=30. I have
SQL> select * from hr.regions;
REGION_ID REGION_NAME
30 JAPAC
1 Europe
2 Americas
3 Asia
4 Middle East and Africa
SQL>
The same table on the primary database has the following records in the same table:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\MMJ>set ORACLE_HOME=c:\app\mmj\product\11.1.0\db_1
C:\Documents and Settings\MMJ>set ORACLE_SID=i11g1
C:\Documents and Settings\MMJ>
C:\Documents and Settings\MMJ>cd %ORACLE_HOME%
C:\app\MMJ\product\11.1.0\db_1>cd bin
C:\app\MMJ\product\11.1.0\db_1\BIN>
C:\app\MMJ\product\11.1.0\db_1\BIN>
C:\app\MMJ\product\11.1.0\db_1\BIN>sqlplus /nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Mar 25 11:43:10 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected.
SQL>
SQL> select * from hr.regions;
REGION_ID REGION_NAME
1 Europe
2 Americas
3 Asia
4 Middle East and Africa
20 JAPAC
40 JAPAC
6 rows selected.
SQL>
=======> The TNSPING works fine against both the databases.
C:\app\MMJ\product\11.1.0\db_1\BIN>set O
ORACLE_HOME=c:\app\mmj\product\11.1.0\db_1
ORACLE_SID=I11G1SB
OS=Windows_NT
C:\app\MMJ\product\11.1.0\db_1\BIN>
C:\app\MMJ\product\11.1.0\db_1\BIN>tnsping i11g1sb
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 25-MAR-2009 16:56:42
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
c:\app\mmj\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = MHost)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAM
E = I11G1SB)))
OK (230 msec)
C:\app\MMJ\product\11.1.0\db_1\BIN>tnsping i11g1
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 25-MAR-2009 16:56:47
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
c:\app\mmj\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = MHost)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAM
E = I11G1)))
OK (30 msec)
C:\app\MMJ\product\11.1.0\db_1\BIN>lsnrctl
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 25-MAR-2009 16:57:01
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> set current_listener i11g1
Current Listener is i11g1
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MHost)(PORT=1523)))
Services Summary...
Service "I11G1" has 1 instance(s).
Instance "I11G1", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0
LOCAL SERVER
Service "I11G1SB" has 1 instance(s).
Instance "I11G1SB", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:55 refused:1
LOCAL SERVER
Service "I11G1SB_DGMGRL" has 1 instance(s).
Instance "I11G1SB", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "i11g1.mhost" has 1 instance(s).
Instance "i11g1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:6 refused:0 state:ready
LOCAL SERVER
Service "i11g1XDB.mhost" has 1 instance(s).
Instance "i11g1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: MHost, pid: 3944>
(ADDRESS=(PROTOCOL=tcp)(HOST=MHost)(PORT=1430))
Service "i11g1_DGB.mhost" has 1 instance(s).
Instance "i11g1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:6 refused:0 state:ready
LOCAL SERVER
Service "i11g1_XPT.mhost" has 1 instance(s).
Instance "i11g1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:6 refused:0 state:ready
LOCAL SERVER
Service "i11g1sb.mhost" has 1 instance(s).
Instance "i11g1sb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "i11g1sbXDB.mhost" has 1 instance(s).
Instance "i11g1sb", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: MHost, pid: 7336>
(ADDRESS=(PROTOCOL=tcp)(HOST=MHost)(PORT=1931))
Service "i11g1sb_DGB.MHost" has 1 instance(s).
Instance "i11g1sb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "i11g1sb_XPT.mhost" has 1 instance(s).
Instance "i11g1sb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
LSNRCTL>

Thanks for the response.
So, here is the status now....with a little background...
After my original post, I started to read the manuals and I found the sql command to convert the database back from snapshot to physical standby (sb).
That worked fine and I had my snapshot sb back to physical sb.
So when you posted the suggestion, I already had my db in physical sb mode. I said no problem, I will convert it back to snapshot and then back again using dgmgrl instead of sql+
Well here is how my listener is configured now.
SID_LIST_I11G1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = I11G1.MHOST)
(ORACLE_HOME = c:\app\mmj\product\11.1.0\db_1)
(SID_NAME = I11G1)
(SID_DESC =
(GLOBAL_DBNAME = I11G1SB.MHOST)
(ORACLE_HOME = c:\app\mmj\product\11.1.0\db_1)
(SID_NAME = I11G1SB)
(SID_DESC =
(GLOBAL_DBNAME = I11G1SB_DGMGRL)
(ORACLE_HOME = c:\app\mmj\product\11.1.0\db_1)
(SID_NAME = I11G1SB)
Then using dgmgrl I tried to change the db from p-sb to s-sb and the results are not good....
"i11g1 >"dgmgrl
DGMGRL for 32-bit Windows: Version 11.1.0.6.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL>
DGMGRL> connect sys/[email protected]
Connected.
DGMGRL>
DGMGRL>
DGMGRL> convert database 'i11g1sb' to snapshot standby;
Converting database "i11g1sb" to a Snapshot Standby database, please wait...
Database "i11g1sb" converted successfully
DGMGRL> show configuration
Configuration
Name: DGConfig1
Enabled: YES
Protection Mode: MaxPerformance
Databases:
i11g1 - Primary database
i11g1sb - Snapshot standby database
Fast-Start Failover: DISABLED
Current status for "DGConfig1":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show configuration
Configuration
Name: DGConfig1
Enabled: YES
Protection Mode: MaxPerformance
Databases:
i11g1 - Primary database
i11g1sb - Snapshot standby database
Fast-Start Failover: DISABLED
Current status for "DGConfig1":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database 'i11g1sb';
Database
Name: i11g1sb
Role: SNAPSHOT STANDBY
Enabled: YES
Intended State: APPLY-OFF
Instance(s):
i11g1sb
Current status for "i11g1sb":
SUCCESS
DGMGRL> show database 'i11g1';
Database
Name: i11g1
Role: PRIMARY
Enabled: YES
Intended State: TRANSPORT-ON
Instance(s):
i11g1
Current status for "i11g1":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> exit
Not sure if the following (notice the typo in the service name) in the parameter (log_archive_dest_2) definition on the standby d/b has anything to do with this. I did not get this error when I initially converted to s-sb.
also I checked all my session notes, I did not type the command to set this parameter on the standby d/b and so it was not a typo on my part. However, it seems to have come from the rman script supplied with the obe. This script is supposed to clone the primary d/b to a standby db and in the process replace the string /i11g1/ with /i11g1sb/.
SQL> show parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string service=i11g1sbsb async valid_
for=(online_logfile,primary_ro
le) db_unique_name=i11g1sb
SQL>
SQL>
SQL> select instance_name from v$instance;
INSTANCE_NAME
i11g1sb
SQL>
Given all this, the archive logs seem to be shipping correctly to the sby d/b.
"i11g1sb >"cd C:\app\MMJ\flash_recovery_area\i11g1sb\ARCHIVELOG\2009_03_30
"i11g1sb >"dir
Volume in drive C is Local Disk
Volume Serial Number is 3189-6472
Directory of C:\app\MMJ\flash_recovery_area\i11g1sb\ARCHIVELOG\2009_03_30
30/03/2009 09:05 PM <DIR> .
30/03/2009 09:05 PM <DIR> ..
30/03/2009 05:41 PM 35,627,008 O1_MF_1_137_4X2H4JJM_.ARC
30/03/2009 05:41 PM 1,910,784 O1_MF_1_138_4X2H4LVC_.ARC
30/03/2009 09:04 PM 10,447,360 O1_MF_1_139_4X2V03RW_.ARC
30/03/2009 09:05 PM 8,654,848 O1_MF_1_140_4X2V3BWB_.ARC
4 File(s) 56,640,000 bytes
2 Dir(s) 39,716,225,024 bytes free
"i11g1sb >"
"i11g1 >"dir
Volume in drive C is Local Disk
Volume Serial Number is 3189-6472
Directory of C:\app\MMJ\flash_recovery_area\I11G1\ARCHIVELOG\2009_03_30
30/03/2009 09:05 PM <DIR> .
30/03/2009 09:05 PM <DIR> ..
30/03/2009 04:09 PM 35,627,008 O1_MF_1_137_4X29QHTV_.ARC
30/03/2009 04:24 PM 1,910,784 O1_MF_1_138_4X2BMOC7_.ARC
30/03/2009 06:32 PM 10,447,360 O1_MF_1_139_4X2L4J3X_.ARC
30/03/2009 09:05 PM 8,654,848 O1_MF_1_140_4X2V37KL_.ARC
4 File(s) 56,640,000 bytes
2 Dir(s) 39,716,229,120 bytes free
I am tempted to start all over again, but I'd rather use this opportunity to debug this issue (as a learning exercise). I can always start from scratch. That brings up another Q: What do I need to do to blow away all traces of the stand by database (including all the archive logs etc...) keeping my primary intact. I'd also like to blow away all snapshot and archive logs for the primary as well.

Problems with standby mode in Windows XP

Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

Problem in standby database

Hi,
Logs which are shipping to standby database are not been registered automatically..
I need to register them manual....
Can you please help me in finding the problem behind this.

Aman wrote:
Hi,
Logs which are shipping to standby database are not been registered automatically..
I need to register them manual....
Can you please help me in finding the problem behind this.Firstly that is not possible which log actually shipped to standby database but not registered.But you can manually register log using ALTER DATABASE REGISTER LOGFILE clause or just transfer archive log to LOG_ARCHIVE_DEST_1 destination on standby side and this will enough.When recovering process these logs will be apply.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/original_export.htm

Droid 3 problems - Cell standby eats up a ton of battery - camera doesn't work - more in thread.

I am making a post regarding this problem because it seems only new posts get a response from VZW reps. Before you ask, yes I have used the battery saving tips - this is clearly a problem with cell standby and wifi. They are, by far, the biggest consumers of the battery. I don't know what's going on here but this should not be happening. Even on the unpatched Thunderbolt the battery life wasn't this bad. This battery problem is clearly not because of any third party apps, even with no accounts set up and nothing installed, the battery drains very quickly.
The camera doesn't work right, and regularly freezes. When it does work, it's very blue. I am told this is a known issue and the patch is on the way I'm told.
The stock keyboard's suggestion bar often stays on the screen no matter what, regardless of whether I am typing or not.
The Droid 3 does NOT charge off my car's USB cable, every other phone and mobile device I've tried does, however, so this is clearly an issue with the phone.
The stock homescreen lags and redraws often.
The pre-installed apps that I don't want or use, are using up a big chunk of memory (and certainly not helping already abysmal battery life). If they are killed, they just start themselves again. They cannot be uninstalled. If Verizon wants to give us extra apps, great, but allow us to uninstall them.
I received this as a replacement phone because the previous replacement phone was having issues. I've gotten dozens of replacement phones and ALL of them have had problems. Whatever steps are being taken to ensure these phones work properly do not ensure that people are getting a working phone. This process needs to be revised. The premium price we as Verizon customers pay should translate to our customer experience.
-A very frustrated customer.

I've had a Droid 3 for about a month. I think it's a really good phone, but cell standby and phone idle are the biggest consumers of battery life on my phone. The camera is slow to load and the images have a blue tint sometimes. When surfing the web or the app store and exiting afterwards, the main screen can take 8 - 16 seconds to materialize. When surfing through the Social Messaging (NonBlur) widget, it repeats things you've already read when you check it later on and when replying to comments via the Social Messaging widget, they don't always post. The back cover squeaks now from removing it occasionally to pull the battery when the phone freezes up. For being a 1G dual core processor phone, you would never know it. I've also had problems with the suggestion bar remaining on the screen even after you press the space bar. The app store is maddeningly slow to load. The indicator next to my battery charging port doesn't work, well it flickered once. I haven't had issues with Bluetooth or wifi as some have. My GPS seems to work well.
The bloatware on the phone is ridiculous. I don't use any of the Verizon apps or other preloaded apps. They take up a lot of the useable space on the phone and can't be removed. I really don't care about an NFL app....and I can't remove it or anything else. Verizon should give you the option of removing the apps you won't use. It would be a good customer service move. Instead, I think its selfish to make us live with apps that take up space and slow the phone down. This phone comes with Android 2.3.4 which is the fastest version of Android right now....I can honestly say that my Droid X with 2.2 was faster on the move than this phone. However, after downloading 2.3.3, it ruined the phone and a replacement.
I think if a software update addresses most of these issues, the Droid 3 would be outstanding. The hardware keyboard is the best on the market and I love the 4 inch screen. I pay $100 + a month for service through Verizon. I think the phone should operate as promised. The 8 megapixel camera is slow to load and focus. My old Droid X had a good 8MP camera sensor. Lesser phones have great cameras. My boss' iphone 4 takes WAY better pics with a 5MP camera. I know it's a software issue and that it can be resolved. Make this phone world class by working with Motorola to deliver a quality software update.
I stick with Verizon because of their reliable coverage. If this phone doesn't get addressed with a software update, I'll look at a WP7 phone or something on Sprint (better prices on data etc) or Virgin Mobile which has some decent phones and dirt cheap messaging and data plans.

WiFi Problems after standby

Hi,
I am having problems with the PB's WiFi connectivity after returning from standby. Even though it appears as connected (full signal) I have to turn the WiFi connection off and on to be able to browse.
Anyone else having this problem?
Thanks in advance.

Just to let you know that I have had a solution for the standby/resume probelm from another site.
FYI below.
However the WiFi Driver and SSL VPN stopping WiFi and WLAN conectivity is still an issue.
PAUL
Solution to Standby Resume error.......
net stop wzcsvc
sc config wzcsvc start= disabled
Another satisfied customer here! I updated a couple of days ago to SP3 on my WinXP Pro system. I had the exact same problem (wzcsvc crash after standby/hibernate) and solution. What I don't know is if WZC was previously running in my SP2 installation or not, though I have no wireless device installed in this computer and SP3 was one of the only variables to consider.
BUT... I DO have an Asus P5B Deluxe motherboard. Now, that alone isn't very interesting except they made two flavors of this board: one with a wireless adapter (Deluxe/WiFi) and one without (just Deluxe). I have the one "without" but if SP3 looked at the system and didn't make that distinction it's possible SP3 decided Wifi was present perhaps based on the BIOS (which is the same for the Wifi and non-Wifi version of the mobo, as I recall) and installed and/or enabled the WZC service!
This bug (in SP3 itself or specifically WZC for failing this way) would be worth noting and fixing because I suspect lots of PCs out there have WiFi capability in the BIOS but possibly not the actual WiFi hardware. I personally hope others I've seen posting about this issue in SP3 find THIS thread useful. I'm very glad to have standby/hibernation working again!
By the way, of all the svchost processes the one with WZC in it had 30 total services attached to it. I'm curious why this process is so "overloaded" (if that's an accurate description) versus the other svchot processes which each only have a few services or less attached to them? Also, when it would fail and restart that svchost process only a handful of them actually came back (less than half!) I'm curious why that is as well...

Dataguard Problem(logical standby database)

Hi,
I have successfully created logical standby database, and everything is working fine, all of the SQL is applying and archiving is also shipping.
Until I create a new tablespace for e.g. pay in the primary database, and suddenly SQL applying is stopped, but the archive is shipping.
I am using Windows XP SP2 and Oracle 10gRel2.
The contents of AlertLog file are as
Wed Jul 23 22:52:19 2008
Thread 1 cannot allocate new log, sequence 133
Checkpoint not complete
Current log# 3 seq# 132 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO03.LOG
Wed Jul 23 22:52:23 2008
Destination LOG_ARCHIVE_DEST_2 is SYNCHRONIZED
Wed Jul 23 22:52:23 2008
Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
Wed Jul 23 22:52:23 2008
Thread 1 advanced to log sequence 133 (LGWR switch)
Current log# 1 seq# 133 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO01.LOG
Thread 1 cannot allocate new log, sequence 134
Checkpoint not complete
Current log# 1 seq# 133 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO01.LOG
Wed Jul 23 22:52:29 2008
Destination LOG_ARCHIVE_DEST_2 is SYNCHRONIZED
Wed Jul 23 22:52:29 2008
Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
Wed Jul 23 22:52:29 2008
Thread 1 advanced to log sequence 134 (LGWR switch)
Current log# 2 seq# 134 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO02.LOG
Wed Jul 23 22:55:49 2008
Thread 1 cannot allocate new log, sequence 135
Checkpoint not complete
Current log# 2 seq# 134 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO02.LOG
Wed Jul 23 22:55:54 2008
Destination LOG_ARCHIVE_DEST_2 is SYNCHRONIZED
Wed Jul 23 22:55:54 2008
Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
Wed Jul 23 22:55:54 2008
Thread 1 advanced to log sequence 135 (LGWR switch)
Current log# 3 seq# 135 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO03.LOG
When i use this command, the SQL Apply starts again but the tablespace is not created on Logical standby database.
kindly give me a solution.
Thanks in advanced.

In Standy database also you need to add TB details for it to recognise Primary DB new TB .
try adding it and retry your operation .

Problem creating standby database using RMAN

I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukanta

channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M

X200 Ultrabase problems with Standby and Hibernate

My system (x200) hangs on standy or hibernate when docked. Off the dock everything works fine. I am running XP with all the updated drivers (at least the update utility says so). Anybody else have this problem or know the solution?
To put it another way: Is the Ultrabase ACPI compliant? Does anybody hibernate succesfully while docked?
Message Edited by lomonosov on 07-20-2009 03:50 PM

After updating Vista Business, Bios and Driver which took several hours, Lenovo changed the Ultrabase within one day.The probleme with sleepmode, hibernation and shutdown has gone until I plugged the DVD drive into the Ultrabase!
Could you confirm that the X200 could go into hibernate- or sleepmode with or without DVD drive?I now will open a new ticket at Lenovo for change the DVD drive.

HT1749 G5 problem on standby mode only

When power on,only lights showed up.standby mode only

Do you have stamina mode enabled?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

HT201177 Problem with standby

I have a new MacBook Pro 13-inch retina display. I usually do not switch it off but simply close the lid. The other day I noticed it became extremely hot when I did this and the fan was running. I opened it but it did not turn on until it cooled down. Could this be because of an open application? I have Bitorrent installed.

Yes. Quit Bitorrent before putting your Mac to sleep.

Standby Switchover problem

Hi all,
I am using oracle 10.2 DB on RHEL
I have two DB on a single m/c i.e prim and stand
I had performed a switchover and at that time it was successfull.....i.e prim to stand and stand to prim.
Now i want to perform switchover again so that my prim db shoul now be activated as a primary only ad stand db sbhould work as standby DB
but when i try to start the DB .....
When I try t start both DB simultaboulsy i an getting a message for one of the DB
i.e
ORA_24324: service handle not initalized
ORA-01041: internal error.hostdef extension doesn't exist
But when i shudown the startedDB then it gets started.....
pls suggest me.....

I am using oracle 10.2 DB on RHEL
I have two DB on a single m/c i.e prim and stand
I had performed a switchover and at that time it was successfull.....i.e prim to stand and stand to prim.
Now i want to perform switchover again so that my prim db shoul now be activated as a primary only ad stand db sbhould work as standby DB
but when i try to start the DB .....
When I try t start both DB simultaboulsy i an getting a message for one of the DB
i.e
ORA_24324: service handle not initalized
ORA-01041: internal error.hostdef extension doesn't exist
But when i shudown the startedDB then it gets started.....
I do not think this is problem with standby configuration. Please check this.

Issue on physical standby database

Hi
I've a problem on standby database.
I recently added a datafile on primary database, then I scp'ed the data file to physical standby database.On physical standby database I tried performing recovery.
I get following message in my alert log
WARNING! Recovering data file 88 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
ORA-279 signalled during: ALTER DATABASE RECOVER standby database ...
how can I fix this now.
We keep physical standby database 2 day behind, and apply logs manually.
Physical standby database is maintained manually.
Could someone help me in getting out of this problem.
Oracle 9.2.0.7
solaris

Versus keeping it in manual mode, you can specify a time "delay" for the application of the logs:
From http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm#i1022811
6.2.2 Specifying a Time Delay for the Application of Archived Redo Log Files
In some cases, you may want to create a time lag between the time when redo data is received from the primary site and when it is applied to the standby database. You can specify a time interval (in minutes) to protect against the application of corrupted or erroneous data to the standby database. When you set a DELAY interval, it does not delay the transport of the redo data to the standby database. Instead, the time lag you specify begins when the redo data is completely archived at the standby destination.
Note:
If you define a delay for a destination that has real-time apply enabled, the delay is ignored.
Specifying a Time Delay
You can set a time delay on primary and standby databases using the DELAY=minutes attribute of the LOG_ARCHIVE_DEST_n initialization parameter to delay applying archived redo log files to the standby database. By default, there is no time delay. If you specify the DELAY attribute without specifying a value, then the default delay interval is 30 minutes.
Canceling a Time Delay
You can cancel a specified delay interval as follows:
For physical standby databases, use the NODELAY keyword of the RECOVER MANAGED STANDBY DATABASE clause:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE NODELAY;
For logical standby databases, specify the following SQL statement:
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY NODELAY;
These commands result in log apply services immediately beginning to apply archived redo log files to the standby database, before the time interval expires. Also, see:
Section 12.8, "Using a Physical Standby Database with a Time Lag"
Oracle Database SQL Reference for the DELAY attribute of the ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement

Logical standby apply won't apply logs

RDBMS Version: Oracle 10.2.0.2
Operating System and Version: Red Hat Enterprise Linux ES release 4
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): Oracle Dataguard (Logical Standby)
Product Version:
Hi!!
I have problem logical standby apply won't apply logs.
SQL> SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
TYPE HIGH_SCN
STATUS
COORDINATOR 288810
ORA-16116: no work available
READER 288810
ORA-16240: Waiting for logfile (thread# 1, sequence# 68)
BUILDER 288805
ORA-16116: no work available
TYPE HIGH_SCN
STATUS
PREPARER 288804
ORA-16116: no work available
ANALYZER 288805
ORA-16116: no work available
APPLIER 288805
ORA-16116: no work available
TYPE HIGH_SCN
STATUS
APPLIER
ORA-16116: no work available
APPLIER
ORA-16116: no work available
APPLIER
ORA-16116: no work available
TYPE HIGH_SCN
STATUS
APPLIER
ORA-16116: no work available
10 rows selected.
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME, DICT_BEGIN, DICT_END FROM DBA_LOGSTDBY_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIM NEXT_TIME DIC DIC
66 11-JAN-07 11-JAN-07 YES YES
67 11-JAN-07 11-JAN-07 NO NO
SQL> SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME = 'coordinator state';
NAME
VALUE
coordinator state
IDLE
SQL> SELECT APPLIED_SCN, NEWEST_SCN FROM DBA_LOGSTDBY_PROGRESS;
APPLIED_SCN NEWEST_SCN
288803 288809
INITPRIMARY.ORA
DB_NAME=primary
DB_UNIQUE_NAME=primary
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
service_names=primary
instance_name=primary
UNDO_RETENTION=3600
LOG_ARCHIVE_CONFIG='DG_CONFIG=(primary,standy)'
LOG_ARCHIVE_DEST_1=
'LOCATION=/home/oracle/primary/arch1/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_2=
'SERVICE=standy LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=standy'
LOG_ARCHIVE_DEST_3=
'LOCATION=/home/oracle/primary/arch2/
VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE)
DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
LOG_ARCHIVE_DEST_STATE_3=ENABLE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=standy
FAL_CLIENT=primary
DB_FILE_NAME_CONVERT='standy','primary'
LOG_FILE_NAME_CONVERT=
'/home/oracle/standy/oradata','home/oracle/primary/oradata'
STANDBY_FILE_MANAGEMENT=AUTO
INITSTANDY.ORA
db_name='standy'
DB_UNIQUE_NAME='standy'
REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
SERVICE_NAMES='standy'
LOG_ARCHIVE_CONFIG='DG_CONFIG=(primary,standy)'
DB_FILE_NAME_CONVERT='/home/oracle/primary/oradata','/home/oracle/standy/oradata'
LOG_FILE_NAME_CONVERT=
'/home/oracle/primary/oradata','/home/oracle/standy/oradata'
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_DEST_1=
'LOCATION=/home/oracle/standy/arc/
VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=standy'
LOG_ARCHIVE_DEST_2=
'SERVICE=primary LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_3=
'LOCATION=/home/oracle/standy/arch2/
VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE)
DB_UNIQUE_NAME=standy'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
LOG_ARCHIVE_DEST_STATE_3=ENABLE
STANDBY_FILE_MANAGEMENT=AUTO
FAL_SERVER=primary
FAL_CLIENT=standy
Alert Log Banco "Standy" desde a inicialização do SQL Apply
Thu Jan 11 15:00:54 2007
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE
Thu Jan 11 15:01:00 2007
alter database add supplemental log data (primary key, unique index) columns
Thu Jan 11 15:01:00 2007
SUPLOG: Updated supplemental logging attributes at scn = 289537
SUPLOG: minimal = ON, primary key = ON
SUPLOG: unique = ON, foreign key = OFF, all column = OFF
Completed: alter database add supplemental log data (primary key, unique index) columns
LOGSTDBY: Unable to register recovery logfiles, will resend
Thu Jan 11 15:01:04 2007
LOGMINER: Error 308 encountered, failed to read missing logfile /home/oracle/standy/arch2/1_68_608031954.arc
Thu Jan 11 15:01:04 2007
LOGMINER: Error 308 encountered, failed to read missing logfile /home/oracle/standy/arch2/1_68_608031954.arc
Thu Jan 11 15:01:04 2007
ALTER DATABASE START LOGICAL STANDBY APPLY (standy)
with optional part
IMMEDIATE
Attempt to start background Logical Standby process
LSP0 started with pid=21, OS id=12165
Thu Jan 11 15:01:05 2007
LOGSTDBY Parameter: DISABLE_APPLY_DELAY =
LOGSTDBY Parameter: REAL_TIME =
Completed: ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE
Thu Jan 11 15:01:07 2007
LOGSTDBY status: ORA-16111: log mining and apply setting up
Thu Jan 11 15:01:07 2007
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 3, Transaction Chunk Size = 201
LOGMINER: Memory Size = 30M, Checkpoint interval = 150M
LOGMINER: session# = 1, reader process P000 started with pid=22 OS id=12167
LOGMINER: session# = 1, builder process P001 started with pid=23 OS id=12169
LOGMINER: session# = 1, preparer process P002 started with pid=24 OS id=12171
Thu Jan 11 15:01:17 2007
LOGMINER: Begin mining logfile: /home/oracle/standy/arch2/1_66_608031954.arc
Thu Jan 11 15:01:17 2007
LOGMINER: Turning ON Log Auto Delete
Thu Jan 11 15:01:26 2007
LOGMINER: End mining logfile: /home/oracle/standy/arch2/1_66_608031954.arc
Thu Jan 11 15:01:26 2007
LOGMINER: Begin mining logfile: /home/oracle/standy/arch2/1_67_608031954.arc
Thu Jan 11 15:01:26 2007
LOGMINER: End mining logfile: /home/oracle/standy/arch2/1_67_608031954.arc
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_ATTRCOL$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_CCOL$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_CDEF$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_COL$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_COLTYPE$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_ICOL$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_IND$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_INDCOMPART$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_INDPART$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_INDSUBPART$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_LOB$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_LOBFRAG$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_OBJ$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_TAB$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_TABCOMPART$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_TABPART$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_TABSUBPART$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_TS$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_TYPE$ have been marked unusable
Thu Jan 11 15:01:33 2007
Some indexes or index [sub]partitions of table SYSTEM.LOGMNR_USER$ have been marked unusable
Thu Jan 11 15:02:05 2007
Indexes of table SYSTEM.LOGMNR_ATTRCOL$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_ATTRIBUTE$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_CCOL$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_CDEF$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_COL$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_COLTYPE$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_DICTIONARY$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_ICOL$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_IND$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_INDCOMPART$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_INDPART$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_INDSUBPART$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_LOB$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_LOBFRAG$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_OBJ$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_TAB$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_TABCOMPART$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_TABPART$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_TABSUBPART$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_TS$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_TYPE$ have been rebuilt and are now usable
Indexes of table SYSTEM.LOGMNR_USER$ have been rebuilt and are now usable
LSP2 started with pid=25, OS id=12180
LOGSTDBY Analyzer process P003 started with pid=26 OS id=12182
LOGSTDBY Apply process P008 started with pid=20 OS id=12192
LOGSTDBY Apply process P007 started with pid=30 OS id=12190
LOGSTDBY Apply process P005 started with pid=28 OS id=12186
LOGSTDBY Apply process P006 started with pid=29 OS id=12188
LOGSTDBY Apply process P004 started with pid=27 OS id=12184
Thu Jan 11 15:02:48 2007
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 12194
RFS[1]: Identified database type as 'logical standby'
Thu Jan 11 15:02:48 2007
RFS LogMiner: Client enabled and ready for notification
Thu Jan 11 15:02:49 2007
RFS LogMiner: RFS id [12194] assigned as thread [1] PING handler
Thu Jan 11 15:02:49 2007
LOGMINER: Begin mining logfile: /home/oracle/standy/arch2/1_66_608031954.arc
Thu Jan 11 15:02:49 2007
LOGMINER: Turning ON Log Auto Delete
Thu Jan 11 15:02:51 2007
LOGMINER: End mining logfile: /home/oracle/standy/arch2/1_66_608031954.arc
Thu Jan 11 15:02:51 2007
LOGMINER: Begin mining logfile: /home/oracle/standy/arch2/1_67_608031954.arc
Thu Jan 11 15:02:51 2007
LOGMINER: End mining logfile: /home/oracle/standy/arch2/1_67_608031954.arc
Please, help me more time!!!!
Thanks.

Hello!
thank you for the reply.
The archive 1_68_608031954.arc that error of reading occurred, did not exist in the date of the error sees below:
$ ls -lh /home/oracle/standy/arch2/
total 108M
-rw-r----- 1 oracle oinstall 278K Jan 11 15:00 1_59_608031954.arc
-rw-r----- 1 oracle oinstall 76K Jan 11 15:00 1_60_608031954.arc
-rw-r----- 1 oracle oinstall 110K Jan 11 15:00 1_61_608031954.arc
-rw-r----- 1 oracle oinstall 1.0K Jan 11 15:00 1_62_608031954.arc
-rw-r----- 1 oracle oinstall 2.0K Jan 11 15:00 1_63_608031954.arc
-rw-r----- 1 oracle oinstall 96K Jan 11 15:00 1_64_608031954.arc
-rw-r----- 1 oracle oinstall 42K Jan 11 15:00 1_65_608031954.arc
-rw-r----- 1 oracle oinstall 96M Jan 13 06:10 1_68_608031954.arc
-rw-r----- 1 oracle oinstall 12M Jan 13 13:29 1_69_608031954.arc
$ ls -lh /home/oracle/primary/arch1/
total 112M
-rw-r----- 1 oracle oinstall 278K Jan 11 14:21 1_59_608031954.arc
-rw-r----- 1 oracle oinstall 76K Jan 11 14:33 1_60_608031954.arc
-rw-r----- 1 oracle oinstall 110K Jan 11 14:46 1_61_608031954.arc
-rw-r----- 1 oracle oinstall 1.0K Jan 11 14:46 1_62_608031954.arc
-rw-r----- 1 oracle oinstall 2.0K Jan 11 14:46 1_63_608031954.arc
-rw-r----- 1 oracle oinstall 96K Jan 11 14:55 1_64_608031954.arc
-rw-r----- 1 oracle oinstall 42K Jan 11 14:55 1_65_608031954.arc
-rw-r----- 1 oracle oinstall 4.2M Jan 11 14:56 1_66_608031954.arc
-rw-r----- 1 oracle oinstall 5.5K Jan 11 14:56 1_67_608031954.arc
-rw-r----- 1 oracle oinstall 96M Jan 13 06:09 1_68_608031954.arc
-rw-r----- 1 oracle oinstall 12M Jan 13 13:28 1_69_608031954.arc
Alert log
hu Jan 11 15:01:00 2007
SUPLOG: Updated supplemental logging attributes at scn = 289537
SUPLOG: minimal = ON, primary key = ON
SUPLOG: unique = ON, foreign key = OFF, all column = OFF
Completed: alter database add supplemental log data (primary key, unique index) columns
LOGSTDBY: Unable to register recovery logfiles, will resend
Thu Jan 11 15:01:04 2007
LOGMINER: Error 308 encountered, failed to read missing logfile /home/oracle/standy/arch2/1_68_608031954.arc
Thu Jan 11 15:01:04 2007
LOGMINER: Error 308 encountered, failed to read missing logfile /home/oracle/standy/arch2/1_68_608031954.arc
You it would know as to help me?
Would be a BUG of the Oracle 10g?
Thanks.

Problem in Standby

Similar Messages

Maybe you are looking for