Conditions are not flowing from info record to PO.

Hi,
I have maintained the condition types P000 and JCOM(supplement octroi condition) in Inforecord.
But when i create a PO only P000 condition types is coming in PO not JCOM.
could you please exaplin the possible reasons?

Hello,
The Info record contains the time depended conditions, P000/PB00 condition mainatined is time  dependent. JCOM depended on the PB00/P000 because octroi will calculate based base value + all the taxes  ( on Total invoice value) as 5 % .
So you need to use JEXS condition in Pricing procedure and it will calculate all the conditions from taxe procedure and fetch  total Taxes in pricing procedure and you can use subtoral and add PB00 and JEXS and calculate JCOM Octroi.
Regards
Mahesh Naik.

Similar Messages

  • Under and over delivery tolerance are not defaulted from Info record

    Under and over delivery tolerance are not defaulted from Info record. Does purchasing value key in material master has precedence over info record.
    What are the settings I have to check.
    Thnaks and regards,
    Suranjana

    No, Info records has precedence on PO than material master
    please check your info record and than verify the PO's plant and info record plant
    you might have more than one inforecord per plant for same vendor and material.
    so please check you have right value in right info record as per the PO vendor, mateiral and plant and Purchase org

  • Pricing Condition not picking from Info record

    Dear Sapians
    We have made all the Changes for Higher Education Cess. Now while creating PO some conditions are not picking from info record(only for some materials). In Dev. server Everything working fine.
    What could be the problem?
    Warm Regards
    Sukumaran.E

    Hi Sukumaran,
    You need to go to PO -> item conditions -> press analysis button.
    double click on the pricing condition on left hand side screen. You will get proper analysis. Like "PBXX     111 Condition ignored (requirement 005 not fulfilled)"
    These descriptions will give clear hint on the reason of price not being picked up.
    - Sanjeev

  • Depot Sales-Excise values are not flowing from J1iJ to VF01

    Hi Gurus,
    In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference. And the excise values are shown here correctly.
    Issue: In VF01- when we are raising the commercial invoice , the duty values are not flowing from the J1IJ transaction. Instead the values are showing Zero for all the three condition types namely JEXP, JECS and JHCS. We have used the Pricing Procedure ZINDEP and 356 routine.
    Inputs on this how to solve will be highly appreciated.. as we are in critical stage.
    What are the checks to be ensured to Get the values flow from J1IJ to VF01.
    Scenario: STO from Mfrg Plant to Depot and Depot sales to customer.
    Me21N-Me29N-VL10B-VL02N-VF01-J1IIn-MIGO-(STO process completes)-VA01-VL01N-J1IJ-VF01(duty values should flow from the J1IJ referenced Excise Invoice) Correct me if I am wrong.
    Any user exits, Notes please let me know. I could not find any. I have gone through the forum threads, which speaks about 356 routine, J1ID- checks etc.
    Thanks&Regards
    Sreekanth:

    Hi!
    Am sure you would have captured the Excise at Depot with J1IG.
    Also, have you saved the billing document to check the duties? 
    Thirdly, after save, again open the billing doc and go to Header-Conditions then Save. This part does not seems logical, but i am sharing my practical experience.
    Please check condition records if any.
    Regards
    Arun

  • Net price not picking from info record

    I am creating a new PO, but net price is not picking from info record. Info record is getting copied in the line item for PO, but net price is not copied. Due to that I am unable to create PO. If I manually enter price PO can be created. Could someone tell me what might be the reason Price is not automatically taken from Info Record. Please guide me what all I need to check.
    The same data is working in one cleint, and in another client this data is facing problem.
    Thanks
    Vineeth

    Hi
    1) If there is condition record exit in system,then while creating po system will take condition record
    2) If In inforecord last po number is exist for material and vendor ,then system will take this into consideration
    3) if your creating po first time for material and vendor ,and we have maintain purchasing inforecord for purchasing organization and for plant,then system will take it into consideration
    40 If none is available we have to put condition manually in po
    Regards
    Kailas ugale

  • Excise Values are not flowing from J1IJ to VF01

    Hi All,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
    I have gone through SDN, everybody is suggesting about 356 routine.
    My scenario is STO from Plant to Depot and Sale from Depot to Customer.
    ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
    In J1IJ, excise values are coming but in VF01 it is not coming.
    Kindly help me.
    With Regards
    Azeez.Mohd

    Hi,
    in j1ig initial screen which excise group/series group i need to enter
    is it of supplying plant or depot --- Enter Your Excise group
    If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
    it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
    You can also use the Excise Invoice Details tab
    Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
    use Depot Excise Invoice in case of transfer from another depot
    and Excise Inv. Date
    On next screen,
    In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Excise Duty Value not flow from J1IJ to VF01

    Hi SAP Expert,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
    Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
    But once i set, it will impact other billing document too. Please advise.
    Thanks.

    Hi,
    I have successfully posted Excise Invoice at Depot using J1iJ.
    When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
    I analyse the pricing condition for condition type JEXP, below is what i got :
    This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
    There are different reasons for this:
    1.The condition was deleted manually in the item condition screen.
    2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
    If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
    1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
    2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
    Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

  • Price from Info record

    Hi
    I maintained the vendor/material info record but when I created the PO the material price is not populated from info record? your advice please.

    hi,
    You can check price for material or condition PB00 in me12/me13
    Also to get price from Inforecord you need to do some setting in Condition Type
    Goto V/06, select condition type and in Changes can be made area, in manual entries tab select
    B     Automatic entry has priority
    OR
    D     Not possible to process manually
    Regards
    Vishal

  • PO Price from Info Record

    Hi Experts,
    We want that in one order type of purchase order PO should be made from Info Record Price. Suppose info record price is Rs 5. Nobody should be able to make po in price 4.90 or 5.10.
    Please help me to achive the same.
    Regards
    GR

    Hi,
    Check the setting :
    Spro-MM-Purchasing - Purchase order- DEfine screen layout at document level. Here you select the required field selection like NBF and double click on the items and make price in display mode so that in PO net price can not be changed at item level.
    Select the condition type PB00 ( price from info record) and(  path :: spro-conditions - price determination process - define condition type ) and go to Changes which can be made tab and select Manual entries and set " D" Not possible to process manually. Here at the condition level, price can not be altered.
    Check it out.
    REgards
    Ram

  • Delta records are not loading from DSO to info cube

    My query is about delta loading from DSO to info cube. (Filter used in selection)
    Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
    Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
    Selected "Change log" and "Get all new data request by request", but again 0 records got updated
    Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and  gave error message "Lock Table Overflow" .
    When I run full load using same filter, data is loading from DSO to info cube.
    Can anyone please help me on this to get delta records from DSO to info cube?
    Thanks,
    Shamma

    Data is loading in case of full load with the same filter, so I don't think filter is an issue.
    When I follow below sequence, I get lock table overflow error;
    1. Full load with active table with or without archive
    2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
    When I chnage the settings of DTP to init run;
    1. Select change log and get only one request, and run the init, It is successfully completed with green status
    2. But when I run the same DTP for delta records, it does not load any data.
    Please help me to resolve this issue.

  • Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

    Hi,
    We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
    We are configuring for the MM-SUS Scenario.
    Now,to accomodate the Tax / Pricing we have installed the add on
    component LOCINSUS and we are having doubts on how to use it:
    1) Tax and pricing information are not flowing into IDOC- orders02
    (e1edp04 and e1edp05 segments are not present in the created IDOC). The
    condition print indicator in checked on ECC System and we have also
    implemented SAP note 995986.
    2)In create ASN transaction , we are not able to see the Excise Invoice
    Number and Date field in Basic data tab as expected from SAP Library
    document although we have installed the Localization Add on component.
    Please help us to reso1ve these issues,
    Regards,
    Mani
    099890-22217.

    Mani,
    Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
    If you did resolve this issue could you please let us know how, much appreciated.
    Bill.

  • Purchase Order is not Picking Price from Info Record.

    Dear All,
                                                                             User had created a Shopping cart in and an automatic Purchase Order is created which is picking the material price from Purchase Requisition but not from Created Inforecord. As checked in P.R at item level it is found that in VALUATION tab there is a field named as " P.O PRICE " , here defalt t selected as " 1 A Gross Price "., Can u please help that from where this field is automatically selected as Gross Price in Purchase requisition.
    Thanx n Rgds,
    sap11

    This is the config done in the OMET transaction where you will see the Adopt PO price field is checked and now this funcitonal authorization code e.g. 01 assgined to user profile in SU3 transaction agianst the parameter EFB.
    if this is active than it will not take price from info record but it will copy from PR.
    to avoid this kind of issue -
    Remove the EFB value in SU3 for particular user or if user needs to have the EFB profile for some other requirements than go to OMET and remove Adopt po price indicator from that profile which is assigned to user

  • Datas from info record should not overwrite BAPI_PO_CREATE parameters

    Hi,
    I intend to pass the netprice value while posting PO through BAPI_PO_CREATE.
    but the values from info record overwriting the parameters supplied.
    Please guide me how to avoid this overwritting.
    Thanks,
    Vempalli

    and have you set a breakpoint at loop at input file and at bapi_po_create ??
    perhaps there is something wrong with the amount of items passed ?
    kind regards
    arthur

  • Vendor Hierarchy with Pricing from Info Record

    Hi All,
    We are currently exploring configuration options available to use a 'Vendor Hierarchy' for price determination during Purchase Order processing - R/3 46C
    We also have a specific business requirement that requires our Vendor Hierarchy node prices be maintained in an Info Record (using a 'PB00' type condition type) rather than the 'LH01' and 'LH02' condition types used to maintain price conditions directly in the Vendor Hierarchy.
    Does anyone know if it is possible to combine a Vendor Hierarchy with pricing that is sourced from Info Record rather than the standard 'LH01' and 'LH02' Vendor Hierarchy pricing conditions in the standard system?
    Thanks,
    Ravelle
    References:
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/12/08464f470311d1894a0000e8323352/frameset.htm">Vendor Hierarchy</a>
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/12/084676470311d1894a0000e8323352/content.htm">Vendor Hierarchy - Purchase Order Pricing</a>

    A solution has not been identified...query closed.

  • Datas are not coming from top to bottom in collumn

    Hiiiii
    I am moving my data from itab to itab1.
    And in itab1 datas are not started from top of the collumn for each a/c no.
    A/CNO|AB|DZ|RV|SA
    00001|00 |000|00 |10
    00001|00 |000|00 |15
    00001|00 |000|020|000
    00002|00 |15 |000 |00
    00002|21 |00 |000 |00
    00002|00 |25 |000 |00
    00002|00 |00 |000 |17
    what should i do to start my data from top of the collumn.
    Thanks in advance.
    Edited by: sanket sagar on Mar 17, 2011 8:14 AM

    Hi,
    Let me add some more comments in your code.
    LOOP AT IT_BKPF INTO WA_BKPF.
    IF SY-SUBRC = 0.    - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
    MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
    ENDIF.
    READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
    BUKRS = WA_BKPF-BUKRS
    GJAHR = WA_BKPF-GJAHR.
    IF WA_BSEG-SHKZG = 'H'.
    WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
    ENDIF.
    IF SY-SUBRC = 0.
    MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
    ENDIF.
    APPEND WA_FINAL TO IT_FINAL.
    ENDLOOP.
    I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
    SORT IT_FINAL BY SAKNR BLART.
    LOOP AT IT_FINAL.
    IF WA_FINAL-BLART = 'AB'
    MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
    ENDIF.
    AND SAME FOR ALL DOC TYPES.
    ENDLOOP.
    SORT IT_FINAL BY HKONT .
    What is the structure of the internal table.
    If my understanding is correct, you want to populate a table as below.
    For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
    HKONT1 - AB - 1000
    HKONT1 - BC - 2000
    HKONT3 - CD - 2000
    Please correct it if your problem is something different.

Maybe you are looking for