Conditions for voiding the printed check

Hi,
I need some information regarding the standard check prin program RFFOUS_C. Please let me know all the conditions for which the program voids the checks.
Regards,
Jaydip

Hi Jaydip,
Print program will void the check numbers that are damaged or unused due to various reasons. You need to input the check numbers that are to be voided to the payment run program or directly to RFFOUS_C program.
Pls go thru following link for more clarification:
http://help.sap.com/saphelp_46c/helpdata/en/01/a9d11a455711d182b40000e829fbfe/frameset.htm

Similar Messages

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

Bonjour for windows: "The printer you have selected is no longer available"

Whenever I go to try and set up sharing my imacs printer with wifes windows computer, the bonjour for windows app at first sees my two printers, but as I select them I then get a message stating that "the bonjour printer you have selected is no longer available. Please make sure the printer is powered on and plugged in." It of course is on, powered and plugged in, and receives print jobs from my mac. I have also configured printer sharing in OS X 10.6 to allow for "everyone" to print. Don't get any firewall messages either.
Same problem happens for me when I am trying to connect from windows running under Parallels on my ibook.
Has anyone run across this problem and can offer guidance? I'm running out of hair to pull out!
Thanks in advance,
"I'm a Mac, and I'm a PC... and we're trying to play nicely together." (mumble-mumble-grumble...)

Problem solved!! Somehow. After being in try everything and anything mode (remove/add printer, update drivers (again), shut down/restart, etc), I think I solved the problem my changing sharing permissions. I still couldn't print though. Kept getting the "printer cannot be contacted over the network" error message. After much searching and reading things I didn't really understand, I noticed I kept running across this statement that Windows 7 does not play well with DHCP and the printer should be assigned a static IP address. I found this forum item that tells simply how to do that: http://discussions.apple.com/thread.jspa?threadID=1725525. The big thing was that it had me add the printer as a local printer where I had been trying to add it as a network printer. I never would have thought to do that. Then you put in the Airport address and that's it. It worked!
This whole thing made it very clear why I moved from Windows to Mac. I should never have had to spend a whole day trying to get a network printer to print. Good luck to everyone having this issue.

FCH7 Authorization Restriction for voiding the checks

Hi Sap Guru,
There is a requirement in FCH7 where we need to provide to User A - just to put the void reason and save and to User B- just to reprint the checks.
Please let me know if any user exist for the same.
Thanks,
M

It is not possibel to provide authorization at this level.

Void a printed check run

Please tell me what transaction code to use so I can void an entire printed Accounts Payable Check Run.
Points will be awarded .
Thanks!
Kathy

Thats the reason I suggetsed to use FCH9. There is no transcation code that exists for deletion of range of checks.
In future if you encounter the same, then I suggest you to use LSMW to delete without going one by one. This as a work around you can use.
FCH3 is not for your requiremnt. This is used when in the cheque lot if you have some unused checks which were torn or damaged then you use this tcode.
By using FCHD you have deleted the check information for the payment run but the vendor or customer acount line items were cleared.
Try FCH7

Signature on the print checks

hi folks,
I have a question related to printing signature on the checks, I need to find how it is done,
In the sap script under the signature window, I found the following code for the text elements,
'INCLUDE ZHEX-MACRO-PPC-SIGNATURE OBJECT TEXT ID ST LANGUAGE EN
where PPC is the company code.
what does this mean? Is it coded in a macro? Any leads would be really helpful.
Thanks,
SK

Thanks Manohar,
It really helped. I found that it comes through a .tif file. I am trying to understand how the file might be created. Because I searched for the image did not find it, probably was uploaded long time back.
Any thoughts would be helpful to understand the process. will award full points.
Thanks,
SK

Query for voided A/P checks

I have the following query to list AP Checks, but I need to see 'voided' checks only and can't find a way to get the check status. Can anyone help?
SELECT CheckNum AS 'Check No.', T0.CheckDate AS 'Check Date', T0.VendorCode AS 'Vendor Code', T0.VendorName AS 'Vendor Name', T0.CheckSum AS 'Check Amount', T0.PrintedBy AS 'Printed By', T0.Printed AS 'Printed', T0.PrnConfrm AS 'Confirm Printing' FROM [dbo].[OCHO] T0

Hi Pat,
Check this :
SELECT CheckNum AS 'Check No.', T0.CheckDate AS 'Check Date', T0.VendorCode AS 'Vendor Code', T0.VendorName AS 'Vendor Name', T0.CheckSum AS 'Check Amount', T0.PrintedBy AS 'Printed By', T0.Printed AS 'Printed', T0.PrnConfrm AS 'Confirm Printing', T0. canceled FROM dbo.OCHO T0 where T0.canceled ='y'
Regards,
Jitin
SAP Business One Forum Team

Exit for changing the budget check

Hello,
We want on our project to modify the logic for budget control and avoid the error "Budget exceed" (BP604).
In our architecture, we want the calculate the budget on another WBS from another project.
Do you know if there are any BADI or Exit on which we can implement these logic ?
Thanks in advance.
Best Regards,
Kevin

Hi Paulo,
Thanks for your quick answer.
Here is an exemple of the business case :
We have one project which is "high level" and contains budget.
Next to that, we have different project with WBS that does not contain budget (or dummy budget). We can do the link with these project with the "high-level" thanks to a Z field.
So when we want to create an invoice (for example) linked to a WBS, we want to check the budget on the "high-level" project and not on WBS.
Regards,
Kevin

Do rollovers support a conditional for moving the mouse out of them?

To clarify, I know I can have a rollover caption or rollover slidelet that does something when I roll over it, but is it possible to set up a conditional to also do something when it isn't being rolled over? I was wondering if I could have like a rollover area that shows an image when I mouse over it and hides the image when I move the mouse away. Is this possible?

Thanks Rod. Not sure how I managed to miss that.
Edit: Is there a way to stop the cursor changing to the hand when you mouse over the rollover area?
Message was edited by: Trihan

VOID PRINTED CHECK

Dear All,
can any one give me the procedure for void the printed check.
If I get the answer ASAP I would be appreciate.
Thanks in advance
Regards
srinivas

Hi Srinivas,
For That you have to do reset the cleared document data in FBRA and there you void the check or individualy void the check in FCH9.
May be this information is useful to you
Regards
Surya

Print program for the smartform for selecting the output type (email/fax)

Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
Rahul

Hi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji

Bypass the quality check/inspection for intercompany POs.

Hi Experts,
Can anybody tell me step by step procedure /configuration change process for bypassing the Quality check/inspection for intercomapany POs.?As we have huge intercompany transaction ,wants to avoid the quality check specialy only for intercomapany POs.
Thanks in advance
Parag

Hi
1. You have to use the inspection type 03 ( In-process inspection)
2. It is possible for results recording at a specific operation. You have to assign the MIC in the particular operation for which you want to do results recording.
3. Giving usage decision for each operation is not possible in Standard SAP. Because only one inspection lot will be generated for an order, in the same lot you have to do the results recording by selecting the required operation. But usage decision is possible for the whole inspection lot only not for each operation.
Regards
Bala

How to print Checks in certain order than by Vendor Numbers?

We need to print certain batch of checks in different order than SAP standard(Vendor Number), is there anyway to make SAP to print them in different order?
Thanks in advance for the assistance.
Points will be awarded.

hi Frank,
Banking>Outgoing Payments>Checks for Payment . From that window you can access the print layout for checks and customise it to suit your requirements.
or,
If you are using SBO 2005, I would recommend going to Banking > Document Printing... See help details as pasted below.
Prerequisites
The following definitions are set:
· The required parameters in Administration > System Initialization > Print Preferences >Per Document tab >Checks for Payment option
· The print-related parameters for each house bank account in Administration > Setup >Banking >House Bank Accounts.
Procedure
1. Choose Banking >Document Printing.
The Document Printing Selection Criteria window appears.
2. In the Document Type field, select Checks for Payment. Enter all other parameters and choose OK.
The Print Checks for Payment window appears.
3. All checks are selected by default. Deselect checks that you do not want to print.
4. Ensure that the Next Check No. is correct. Change it if necessary.
5. Load the printer with the correct check pages or blank paper. Then choose Print.
The Check Number Confirmation window appears.
6. Collect the printed checks from the printer and compare them to the checks displayed in the window.
7. If the numbers assigned by SAP Business One do not match the printed checks, you can change them. Correct the number of the first check and press TAB. The following check numbers are updated accordingly.
Only checks with successive numbers issued by the same account will be updated accordingly. For example, if you change the check number from 999 to 2000, check numbers 1000, 1001, 1002 and so on will be updated to 2001, 2002 and 2003.
If the check numbers are not successive, you must correct each one of them manually.
8. By default, the status of all checks in the window is confirmed. Change the status if necessary.
9. Choose Update or OK.
Result
The numbers assigned to confirmed checks are marked as used.
The Next Check No. field in the House Bank Accounts Setup window is updated.
Check numbers used for overflow printing are marked as voided.
Checks with the Unconfirmed status are marked as printed, but the numbers assigned to them are not marked as used.
hope this helps u.
cheers,
Hema.

How to Print Check in Batches?

Hi All,
I am looking for functionality of printing check in Batches. I am trying with this from Collaboration Window.
I tried with Menu>>Setting>>General >>Printer.but there is no Printer came up.I don't know how to get printer option over here.
Can anybody give me detail on this ,how i can get this functionality. Any document ,Thread?
Thanks,
Nitin

hi,
u can print a check box in different ways.. by inserting symbols and making window as check box..
once go through the thread u will get to k now differnt ways
putting checkboxes in smartform?
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

Print Check Box In MIGO

Hi ALL,
I'm having an issue with print check box in migo .
I created a po and i created a material document(i.e Goods Recipt) in MIGO using the PO nUMBER. I made sure i selected Collective Slip and Print Check Box enabled and posted the document and when i went back to PO and looked at PO History and clicked on the GR Receipt it shows me the Material Document but for some reason the Print Check box is disabled .
Again this happens if i create a po with one particular plant and if i use any other plant it works fine and print check box remains enabled.
I made sure in OMJ3 ,WA03 AND WE03 i have the Plant,St Loc and Printer for the plant WHICH IS CREATING PROBLEM.
Let me know if i'm missing something in here
Thanks
Venki

Hi all,
The same movement type works for all other plants except for one plant .
No matter what movement type is, this plant is always disabling the print chek box for some reason.
Let me know
Thanks

Conditions for voiding the printed check

Similar Messages

Maybe you are looking for