Query for voided A/P checks

I have the following query to list AP Checks, but I need to see 'voided' checks only and can't find a way to get the check status.  Can anyone help?
SELECT CheckNum AS 'Check No.', T0.CheckDate AS 'Check Date', T0.VendorCode AS 'Vendor Code', T0.VendorName AS 'Vendor Name', T0.CheckSum AS 'Check Amount', T0.PrintedBy AS 'Printed By', T0.Printed AS 'Printed', T0.PrnConfrm AS 'Confirm Printing' FROM [dbo].[OCHO] T0

Hi Pat,
Check this :
SELECT CheckNum AS 'Check No.', T0.CheckDate AS 'Check Date', T0.VendorCode AS 'Vendor Code', T0.VendorName AS 'Vendor Name', T0.CheckSum AS 'Check Amount', T0.PrintedBy AS 'Printed By', T0.Printed AS 'Printed', T0.PrnConfrm AS 'Confirm Printing', T0. canceled FROM dbo.OCHO T0 where T0.canceled ='y'
Regards,
Jitin
SAP Business One Forum Team

Similar Messages

  • Query for void circle

    Hello everyone,
    I am new to oracle spatial. I am working hard to figure out query for void circle. Here is what I want to do. Create first circle with radius using buffer then create another circle with different radius then find void area between these two circles. My best guess (after searching lots of sites and book) I need to use SDO_GEOM.SDO_XOR but it did not work for me for some reasons. Any help will be appreciated.
    Oracle 9.2
    Query definition:
    select p.data from mytable p
    where mdsys.sdo_relate(p.geom,( select SDO_GEOM.SDO_XOR(a.geom,m.diminfo,b.geom,m.diminfo) from ( select sdo_geom.sdo_buffer(p.geom,m.diminfo,2640) from mytable p,user_sdo_geom_metadata m
    where p.data = '3123'and m.table_name = 'mytable_name' ) a, (select sdo_geom.sdo_buffer(p.geom,m.diminfo,5000) from mytable p,user_sdo_geom_metadata m where p.data = '3123'and m.table_name = 'mytable_name') b,user_sdo_geom_metadata m ),'mask = anyinteract querytype=window')='TRUE';
    a - respresents first circle
    b - represents second circle
    Thanks

    About Oracle:
    Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.3.0 - Production
    About SQL/PLUS:
    SQL*Plus: Release 9.2.0.1.0 - Production
    Result from 1st query:
    no rows selected
    Result from 2nd query:
    no rows selected
    I was surprised and sure you also when you saw no results for these sub queries.
    But when I run main queries (which I sent you before) it gave me results but not correct.
    In case you want to see here it is:
    Note: this time I used 100 as a radius for smaller number of results.
    From query1(26 results)
    radius 100
    TAXKEY
    3591428000
    3591412000
    3591427000
    3591411000
    3591437000
    3591436000
    3591420000
    3591435000
    3591419000
    3591434000
    3591418000
    3591433000
    3591417000
    3591432000
    3591416000
    3591431000
    3591415000
    3591430000
    3591414000
    3591429000
    3591413000
    3591438000
    3591422000
    3591421000
    3591439000
    3591423000
    from 2nd query (7 results)
    radius 1, 100
    TAXKEY
    3590265000
    3590266000
    3590267000
    3591426000
    3591425000
    3591440000
    3590268000
    FYI, I am using upper case for user_sdo_metadata entry.
    Thank you for your quick response and looking into it.
    Pratik

  • Conditions for voiding the printed check

    Hi,
    I need some information regarding the standard check prin program RFFOUS_C. Please let me know all the conditions for which the program voids the checks.
    Regards,
    Jaydip

    Hi Jaydip,
    Print program will void the check numbers that are damaged or unused due to various reasons. You need to input the check numbers that are to be voided to the payment run program or directly to RFFOUS_C program.
    Pls go thru following link for more clarification:
    http://help.sap.com/saphelp_46c/helpdata/en/01/a9d11a455711d182b40000e829fbfe/frameset.htm

  • Process for voiding multiple payroll cheques

    Does anyone know the correct process for voiding MULTIPLE payroll checks?
    Has anyone used RFFOUS_C to void multiple payroll cheques?
    thanks.

    You can try to change the data in the one of the posting user exits.
    [Refer the user exits mentioned in this thread|Re: how to create a user exit in a Payroll posting program]

  • Report for Void Checks

    All FI Gurus,
    I would like to know if there is a Report for Void Checks with reason codes.

    Hi Gurus,
    My issue is more relevant to voided payroll checks - The payroll check register (FCHN) lists checks that were voided but it doesnu2019t show the u2018Amountu2019 voided (column Amount Paid (FC) ). I need a list of all voided payroll checks for a selected period with the amount voided as it needs to match what the bank says was stopped.
    Any suggestions? Many thanks!
    - Tarun

  • Void multiple PY checks not through off cycle work bench

    Hello,
    We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other.
    Is there any quicker way to void multiple PY checks (If we know the check number to void). What if we run into a scenario where we need to void few hundreds.
    Any advice is greatly appreciated.

    Hi Priya,
    I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
    - Praveen

  • Question/issue regarding querying for uncommited objects in Toplink...

    Hi, was hoping to get some insight into this problem we are encoutering…
    We have this scenario were we are creating a folder hierarchy (using Toplink)
    1. a parent folder is created
    2. child elements are created (in the same transaction as step 1),
    3. we need to lookup the parent folder and assign it as the parent
    of these child elements
    4. end the transaction and commit all data
    In our system we control access to objects by appending a filter to the selection criteria, so we end up with SQL like this example
    (The t2 stuff is the authorization lookup part of the query.) ;
    SELECT t0.ID, t0.CLASS_NAME, t0.DESCRIPTION, t0.EDITABLE,
    t0.DATE_MODIFIED, t0.DATE_CREATED,
    t0.MODIFIED_BY, t0.ACL_ID, t0.NAME, t0.CREATED_BY,
    t0.TYPE_ID, t0.WKSP_ID, t1.ID, t1.LINK_SRC_PATH,
    t1.ABSOLUTE_PATH, t1.MIME_TYPE, t1.FSIZE,
    t1.CONTENT_PATH, t1.PARENT_ID
    FROM XDOOBJECT t0, ALL_OBJECT_PRIVILEGES t2,
    ARCHIVEOBJECT t1
    WHERE ((((t1.ABSOLUTE_PATH = '/favorites/twatson2')
    AND ((t1.ID = t2.xdoobject_id)
    AND ((t2.user_id = 'twatson2')
    AND (bitand(t2.privilege, 2) = 2))))
    AND (t1.ID = t0.ID))
    AND (t0.CLASS_NAME = 'oracle.xdo.server.repository.model.Archivable'))
    When creating new objects we also create the authorization lookup record (which is inserted into a different table.) I can see all the objects are registered in the UOW identity map.
    Basically, the issue is that this scenario all occurs in a single transaction and when querying for the newly created parent folder, if the authorization filter is appended to the query, the parent is not found. If I remove the authorization filter then the parent is found correctly. Or if I break this up into separate transactions and commit after each insert, then the parent is found correctly.
    I use the conformResultsInUnitOfWork attribute on the queries.
    This is related to an earlier thread I have in this discussion forum;
    Nested UnitOfWork and reading newly created objects...
    Thanks for any help you can provide,
    -Tim

    Hi Doug, we add the authorization filter directly in the application code as the query is getting set up.
    Here are some code examples; 1) the first is the code to create new object in the system, followed by 2) the code to create a new authorization lookup record (which also uses the first code to do the actual Toplink insert), then 3) an example of a read query where the authorization filter is appended to the Expression and after that 4) several helper methods.
    I hope this is of some use as it's difficult to show the complete flow in a simple example.
    1)
    // create new object example
    public Object DataAccess.createObject(....
    Object result = null;
    boolean inTx = true;
    UnitOfWork uow = null;
    try
    SessionContext sc = mScm.getCurrentSessionContext();
    uow = TLTransactionManager.getActiveTransaction(sc.getUserId());
    if (uow == null)
    Session session = TLSessionFactory.getSession();
    uow = session.acquireUnitOfWork();
    inTx = false;
    Object oclone = (Object) uow.registerObject(object);
    uow.assignSequenceNumbers();
    if (oclone instanceof BaseObject)
    BaseObject boclone = (BaseObject)oclone;
    Date now = new Date();
    boclone.setCreated(now);
    boclone.setModified(now);
    boclone.setModifiedBy(sc.getUserId());
    boclone.setCreatedBy(sc.getUserId());
    uow.printRegisteredObjects();
    uow.validateObjectSpace();
    if (inTx == false) uow.commit();
    //just temp, see above
    if (true == authorizer.requiresCheck(oclone))
    authorizer.grantPrivilege(oclone);
    result = oclone;
    2)
    // Authorizer.grantPrivilege method
    public void grantPrivilege(Object object) throws DataAccessException
    if (requiresCheck(object) == false)
    throw new DataAccessException(
    "Object does not implement Securable interface.");
    Securable so = (Securable)object;
    ModulePrivilege[] privs = so.getDefinedPrivileges();
    BigInteger pmask = new BigInteger("0");
    for (int i = 0; i < privs.length; i++)
    BigInteger pv = PrivilegeManagerFactory.getPrivilegeValue(privs);
    pmask = pmask.add(pv);
    SessionContext sc = mScm.getCurrentSessionContext();
    // the authorization lookup record
    ObjectUserPrivilege oup = new ObjectUserPrivilege();
    oup.setAclId(so.getAclId());
    oup.setPrivileges(pmask);
    oup.setUserId(sc.getUserId());
    oup.setXdoObjectId(so.getId());
    try
    // this recurses back to the code snippet from above
    mDataAccess.createObject(oup, this);
    catch (DataAccessException dae) {
    Object[] args = {dae.getClass().toString(), dae.getMessage()};
    logger.severe(MessageFormat.format(EXCEPTION_MESSAGE, args));
    throw new DataAccessException("Failed to grant object privilege.", dae);
    3)
    // example Query code
    Object object = null;
    ExpressionBuilder eb = new ExpressionBuilder();
    Expression exp = eb.get(queryKeys[0]).equal(keyValues[0]);
    for (int i = 1; i < queryKeys.length; i++)
    exp = exp.and(eb.get(queryKeys[i]).equal(keyValues[i]));
    // check if need to add authorization filter
    if (authorizer.requiresCheck(domainClass) == true)
    // this is where the authorization filter is appended to query
    exp = exp.and(appendReadFilter());
    ReadObjectQuery query = new ReadObjectQuery(domainClass, exp);
    SessionContext sc = mScm.getCurrentSessionContext();
    if (TLTransactionManager.isInTransaction(sc.getUserId()))
    // part of a larger transaction scenario
    query.conformResultsInUnitOfWork();
    else
    // not part of a transaction
    query.refreshIdentityMapResult();
    query.cascadePrivateParts();
    Session session = getSession();
    object = session.executeQuery(query);
    4)
    // builds the authorzation filter
    private Expression appendReadFilter()
    ExpressionBuilder eb = new ExpressionBuilder();
    Expression exp1 = eb.getTable("ALL_OBJECT_PRIVILEGES").getField("xdoobject_id");
    Expression exp2 = eb.getTable("ALL_OBJECT_PRIVILEGES").getField("user_id");
    Expression exp3 = eb.getTable("ALL_OBJECT_PRIVILEGES").getField("privilege");
    Vector args = new Vector();
    args.add(READ_PRIVILEGE_VALUE);
    Expression exp4 =
    exp3.getFunctionWithArguments("bitand",args).equal(READ_PRIVILEGE_VALUE);
    SessionContext sc = mScm.getCurrentSessionContext();
    return eb.get("ID").equal(exp1).and(exp2.equal(sc.getUserId()).and(exp4));
    // helper to get Toplink Session
    private Session getSession() throws DataAccessException
    SessionContext sc = mScm.getCurrentSessionContext();
    Session session = TLTransactionManager.getActiveTransaction(sc.getUserId());
    if (session == null)
    session = TLSessionFactory.getSession();
    return session;
    // method of TLTransactionManager, provides easy access to TLSession
    // which handles Toplink Sessions and is a singleton
    public static UnitOfWork getActiveTransaction(String userId)
    throws DataAccessException
    TLSession tls = TLSession.getInstance();
    return tls.getTransaction(userId);
    // the TLSession method, returns the active transaction (UOW)
    // or null if none
    public UnitOfWork getTransaction(String uid) {
    UnitOfWork uow = null;
    UowWrapper uw = (UowWrapper)mTransactions.get(uid);
    if (uw != null) {
    uow = uw.getUow();
    return uow;
    Thanks!
    -Tim

  • Use of Checkbox in Report for calculation and determine checked records

    Dear All,
    Application Express 4.0.1.00.03
    I have a Report based on Invoice table which displays unpaid Invoices.
    Also I have added one check box (Not a column in Invoice field) to each row of the report query, the user will be check to pay the Invoice, on checking of the Invoices I need to
    1. Calculate the total of Invoice Amount for selected Invoices.
    2. After selection of Invoices User will click on a Button which will open the Payment Form (New Page or Same Page Region),
    but some way I need to know the Invoice No. of each Invoice row selected so that I can use all the selected Invoice No's for creating the Payment.
    3. Any way to add a button on each row of the Invoice that will be used for the Payment of that Invoice only.
    One way can be to create a column to save the check box value which I am aware of, but am looking for other alternate if possible.
    Hoping for some good solution.
    Thanks & Regards
    Arif Khadas

    vee wrote:
    You would need to make the amount column(the one which is used for total) editable so that its value can be accessed easily from JS. You can made it read-only if required ( apex_item.text(2,INV_RENT_VALUE + INV_OTHER_VALUE ) ?? ) .
    How can I make it read only, there is no such attribute which can be set for report column as it exists for Items.
    Also Now I have the following report query:
    SELECT  INV_LSE_NUM                      "Contract No.",
            INV_FROM_DATE                    "Collection Date",
            INV_FROM_DATE                    "From Date",
            INV_TO_DATE                      "To Date",
            INV_RENT_VALUE + INV_OTHER_VALUE "Invoice Amount",
            INV_AMOUNT_PAID                  "Amount Paid",
            INV_RENT_VALUE + INV_OTHER_VALUE
                           - INV_AMOUNT_PAID "Balance",
            INV_NUM                          "Invoice No.",
            'Pay'                            "Pay",
            APEX_ITEM.CHECKBOX (1, INV_NUM)  "CB_PAY",
            APEX_ITEM.TEXT (2, INV_RENT_VALUE + INV_OTHER_VALUE - INV_AMOUNT_PAID)
                                             "BAL"
    FROM    RE_INVOICE
    WHERE   INV_COM_NUM    =  :P0_COM_NUM
    AND     INV_RENT_VALUE + INV_OTHER_VALUE > INV_AMOUNT_PAID
    AND     INV_LSE_NUM    =(SELECT TO_NUMBER (C001)
                             FROM   APEX_COLLECTIONS
                             WHERE  COLLECTION_NAME = 'LEASE'
                             AND    SEQ_ID          = TO_NUMBER (:P24_SR_NO))The Next thing is the HTML Header for the Page:
    <script language = "JavaScript" type="text/javascript">
    total = 0;
    $('input[name=f01]:checked').each( function(){
      parent_row = $(this).parents('tr:first');
      amt = ( parent_row.find('input[name=f02]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f02]').val() );
      total += amt;
    $s('TEST',total);  -- Test is an Item on the Page.
    </script>Also I checked from the Page source "CB_PAY" and "BAL" have names f01 and f02 respectively.
    Even now when I check or un-check the Value in TEST item is not displayed as required.
    Anything more is required, what am I missing.
    Thanks & Regards
    Arif Khadas

  • Void and Cancelled Checks

    Hello All,
    What is the difference between void and cancelled checks?
    Thanks,
    Deki

    A voided cheque is one where the cheque number is marked as void but the payment document still exists. For example if a cheque was torn and you want to assign the payment to a different cheque.
    A cancelled cheque is when you did not intend to make that payment so you void the cheque and reversed the payment.

  • Error while creating a query for my custom infotype

    Hi,
    I have created a custom infotype with fields currency amount and currency field .
    While I am creating a query for it its giving an error
    Message no. AQ_AD_HOC221 Error when generating the report(see long text )
    I tried to execute the standard program RPUMS40CCI but still I am facing same error .
    I have also maintained table T777i for my infotype but still problem exists.
    Please help.
    P

    Hi
    Check in PM01

  • Query for details of  Sale order , Invoice and COGS

    I Need the report cointing following based on month & Business partner
    Sale order, Sale Amount, Due date, Invoice Amount, Last Invoice date, COGS amount

    Hi Anantha,
    Please check below link and modify according to your requirement.
    Sales Order Query for  in SAP B1
    Query - Sales Orders linked to Deliveries
    My Top SQL Queries for SAP Business One
    Hope this helps
    Regards::::
    Atul Chakraborty

  • Microsoft Query for Office 2013 Home and Business

    Where can I get Microsoft Query for Office 2013 Home and Business version?  I have used it for years on my old XP machine with Office 2003.
    Thank you, Sue

    Hi,
    You seem got an error like "Microsoft query could not be started because it isn’t installed" when you used it. 
    It may be not installed yet. We can go to "Control Panel\All Control Panel Items\Programs and Features\Office 2013 Home and Business\change\Microsoft tools\MS query" and check if it is installed/enabled.
    If it is not installed, please use the Install CD/ full installation copy to reinstall it.
    http://social.technet.microsoft.com/Forums/office/en-US/eb7bfe7d-8fa4-4faf-8563-13ae8b04346d/microsoft-query-could-not-be-started-because-it-isnt-installed?forum=excel (It
    also applies to Excel 2013)
    Regards,
    George Zhao
    TechNet Community Support

  • Query for back 2nd motnh first day and last day

    Any body please provide me the query for back 2nd month first day to back 2nd month last day?
    last month first day
    TIMESTAMPADD(SQL_TSI_MONTH,-1, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE)-1), CURRENT_DATE))
    last month last day
    TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE)), CURRENT_DATE)
    anyone please provide me the queries for previous months like above queries?
    2nd back month first day --?
    2nd back month last day--?
    3rd back month first day --?
    3rd back month last day --?

    Hi,
    Check with this...
    Previous month last day -
    TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE)
    Last day of 2nd month -
    TIMESTAMPADD(SQL_TSI_MONTH,-1,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))
    Last day of 3rd month -
    TIMESTAMPADD(SQL_TSI_MONTH,-2,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))
    (OR)
    Previous month last day -
    TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE)
    Last day of 2nd month -
    TIMESTAMPADD(SQL_TSI_DAY,DAYOFMONTH(TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))*-1,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))
    Last day of 3rd month -
    TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(TIMESTAMPADD(SQL_TSI_DAY,DAYOFMONTH(TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))*-1,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE)))*-1,TIMESTAMPADD(SQL_TSI_DAY,DAYOFMONTH(TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))*-1,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE)))
    Regards,
    Srikanth

  • Erro while running query for a Scheduled work book

    The following error found while running query for a schedule workbook:
    ORA-12801: Error signaled in parallel query server P000
    ORA-01652: uable to extend temp segment by 14720 in tablespace SYSTEM
    ORA-27068: skgfdisp: buffer is not aligned properly
    OSD-04005: SetFilePointer() failure, unable to read it from file
    We are using discoverer 4.1.
    Any help is highly appreciated.
    null

    Candi,
    Have your DBA check for trace file and contact Oracle Support: RDBMS group to track these errors down...
    Chris
    null

  • Operations manager failed to run a wmi query for wmi events (0x800706ba)

    Hi everyone,
    I've been working on this issue for a while and I am still no closer to finding out what the problem is.  If anybody can offer any other advice or things to check, I'm all ears.
    I'm running SCOM 2012 R2 with UR2, and the Cluster Management Pack v6.0.7063.0
    My problem is on one particular batch of cluster servers where I am getting the following error.
    Name: Operations Manager failed to run a WMI query for WMI events
    Alert Description:
    Module was unable to enumerate the WMI data
    Error: 0x800706ba
    Details: The RPC server is unavailable
    Workflow name: Microsoft.Windows.Cluster.Node.StateMonitoring
    Instance Name: servername.domain.local
    Instance ID: {instance_id}
    Management group: SCOM_Management_Grp_Name
    I am getting this alert regardless of whether I run the Windows Cluster Action Account as Local System, or as a domain user with full local admin privileges on all the cluster nodes.
    When looking at the management pack and the workflow in particular (Microsoft.Windows.Cluster.Node.StateMonitoring), I can see that it's trying to access
    MSCluster_Node in the root\MSCLUSTER WMI namespace.
    This is the workflow for your information...
    <UnitMonitor> ID="Microsoft.Windows.Cluster.Node.StateMonitoring" Accessibility="Public" Enabled="onEssentialMonitoring" Target="ClusLibrary!Microsoft.Windows.Cluster.Node" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="ClusLibrary!Microsoft.Windows.Cluster.CheckState" ConfirmDelivery="false">
    <Category>AvailabilityHealth</Category>
    <AlertSettings AlertMessage="Microsoft.Windows.Cluster.Node.StateMonitoring.AlertMessage">
    <AlertOnState>Warning</AlertOnState>
    <AutoResolve>true</AutoResolve>
    <AlertPriority>Normal</AlertPriority>
    <AlertSeverity>MatchMonitorHealth</AlertSeverity>
    <AlertParameters>
    <AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</AlertParameter1>
    <AlertParameter2>$Target/Property[Type="ClusLibrary!Microsoft.Windows.Cluster.Node"]/ClusterName$</AlertParameter2>
    </AlertParameters>
    </AlertSettings>
    <OperationalStates>
    <OperationalState ID="Success" MonitorTypeStateID="Online" HealthState="Success" />
    <OperationalState ID="Warning" MonitorTypeStateID="Partial" HealthState="Warning" />
    <OperationalState ID="Error" MonitorTypeStateID="NotOnline" HealthState="Error" />
    </OperationalStates>
    <Configuration>
    <ClusterObjectName>$Target/Property[Type='ClusLibrary!Microsoft.Windows.Cluster.Node']/NodeName$</ClusterObjectName>
    <PollInterval>60</PollInterval>
    <ClusterObjectClass>MSCLUSTER_Node</ClusterObjectClass>
    <OnlineExpression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </OnlineExpression>
    <OnlineExpressionOnDemand>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </OnlineExpressionOnDemand>
    <PartialExpression>
    <Or>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </Or>
    </PartialExpression>
    <PartialExpressionOnDemand>
    <Or>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </Or>
    </PartialExpressionOnDemand>
    <NotOnlineExpression>
    <And>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </And>
    </NotOnlineExpression>
    <NotOnlineExpressionOnDemand>
    <And>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </And>
    </NotOnlineExpressionOnDemand>
    <WMIFields>Name, State</WMIFields>
    </Configuration>
    </UnitMonitor>
    I can confirm that I am able to browse the MSCluster_Node class locally, as well as remotely using WMIEXPLORER and WBEMTEST,
    however it only works when I set the Authentication Level to
    Packet Privacy.  If I do not select Packet Privacy, a WMI event log error 5605 is logged on the remote servers application log that says...
    The root\mscluster namespace is marked with the RequiresEncryption flag.  Access to this namespace might be denied if the script or application does not have the appropriate authentication level.  Change the authentication level to Pkt_Privacy
    and run the script or application again.
    I can confirm that all firewalls are turned off, and there are no firewalls between the management servers and the agents in question.  AV exclusions have been done and appear to be in place.  The nodes are all Windows 2008 R2 with SP1.  As
    far as I can tell there is plenty of memory available on each of the nodes in question (50%+) of RAM is available. 
    If I manually run the "Discover the Windows Server 2008 R2 Cluster Components" task in the Cluster Service State section of the management pack in the Monitoring Pane in the console, on the nodes in question - the discovery runs successfully.
    Does anybody have any other ideas or suggestions I could try?
    Many thanks in advance,
    Noel.
    http://www.dreamension.net

    Hi,
    Common causes of RPC errors include:
    Errors resolving a DNS or NetBIOS name.
    The RPC service or related services may not be running.
    Problems with network connectivity.
    File and printer sharing is not enabled.
    For more information, please review the link below:
    Windows Server Troubleshooting: "The RPC server is unavailable"
    http://social.technet.microsoft.com/wiki/contents/articles/4494.windows-server-troubleshooting-the-rpc-server-is-unavailable.aspx#Identify
    Troubleshooting RPC Errors
    http://technet.microsoft.com/en-us/magazine/2007.07.howitworks.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Multiple Errors on Adobe Creative Suite 5.5 Program Launch

    Hi, I'm having trouble with my Adobe Creative Suite - I have the Master Collection 5.5 on Windows 7 that I installed a few years ago but recently (without any changes to the computer at all now...) I have error messages occurring when I try to launch

  • Mega 180 , Mp3, Tv.

    Sorry if this is stated in the manual or anywhere. Did not seem to find it. 1. I want to ask whether I am allowed to use the remote to navigate/play..etc, my mp3 songs stored in my harddisk. 2. Can I still use the 'TV controls' button on the remote t

  • Acrobat 11 doesn't recognise the installation

    I've just installed Acrobat 11 Pro on a new computer. I have a pre-existing installation on the old machine. Adobe recognises that the licence is valid but says it can't find a qualifying product. The drop down on the product choice does not have Ado

  • 10.x product are supported on ELM 9.1(2)

    If I have a server with ELM 9.1(2) and I upgrade unity connection to 10.5, it's is supported? or I need to migrate license on PLM which is include on CUC 10.5 ?

  • Would this Adapter work?

    Hi, I've recently acquired a new macbook pro. I have a samsung LCD TV that has a HDMI input. (the model no. for TV is SyncMaster 2032mw) If I buy this: http://cgi.ebay.co.uk/Mini-DisplayPort-to-HDMI-ADAPTER-Display-Port-CONVERTERW0QQitemZ110469845389